Answer:
V¹N²= V²N²
here V¹= ?
N¹= 6.00
V²= 175ml
M²= 0.2M
So V¹= (V²N²)/N² = (175 x 0.2)/6
V¹ = 5.83 ml
Explanation:
Therefore diluting 5.83 ml of 6.00M NaOH to 175 m l ,we get 0.2M Solution.
5.83 ml of 6.0 M NaOH is required to prepare 175 ml of 0.20 M NaOH by dilution according to the concept of molar concentration.
What is molar concentration?
Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.For the mentioned example volume of 6 M NaOH is found out as,
M₁V₁=M₂V₂
∴V₁=0.20×175/6=5.83 ml
Thus, 5.83 ml of 6 M NaOH is required to prepare 175 ml of 0.20 M NaOH by dilution.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ2
Need help on this question asap pleasee
Lily placed a steel knife, a plastic knife and a wooden knife across a glass filled with hot water. She took three equal blobs of butter and placed them on each of these knives. The butter placed on which knife will melt first ?
Answer:
the steel knife, because it's metal.
a. 35
b.65
c.81
d.180
I think it's 80 . 12
pls tell me if correct
What is the molar mass of C 10 H 16 ? Show math Hurry
Answer:
136.24 g/mol is the molecular mass of c10h16
Which is an example of a nonaqueous solution?
gasoline
fog
mayonnaise
fruit juice
Answer: Gasoline
Explanation: Siri said so
The non-aqueous means it does not contain water. Among the given options gasoline is an example of a non-aqueous solution. The correct option is A.
What is a non-aqueous solution?The solution which is obtained by dissolving solute in any liquid other than water is defined as the non-aqueous solution. If solute is dissolved in solvent like benzene, alcohol, ether, carbon disulphide, acetone etc. forms a non aqueous solution.
The major difference between the aqueous and non-aqueous solution is that the solvent of an aqueous solution is water whereas in non-aqueous solutions, the solvent is any substance other than water.
The solvent of non-aqueous solution can be polar or nonpolar and depending on the polarity the solutes dissolve in the solvent. Here gasoline is an example of the non-aqueous solution. The gasoline is a crude oil which does not include water as an ingredient.
Thus the correct option is A.
To know more about non-aqueous solution, visit;
https://brainly.com/question/4992250
#SPJ7
What change has occurred since the Industrial Revolution that has potentially caused a change in Earth’s average climate?
Answer:
Greenhouse gases in the atmosphere absorb heat radiation. Human activity has increased greenhouse gases in the atmosphere since the Industrial Revolution, leading to more heat retention and an increase in surface temperatures.
What would make oppositely charged objects attract each other more?
increasing the positive charge of the positively charged object and increasing the negative charge of the negatively
charged object
decreasing the positive charge of the positively charged object and decreasing the negative charge of the negatively
charged object
increasing the distance between the positively charged object and the negatively charged object
maintaining the distance between the positively charged object and the negatively charged object
Answer: increasing the positive charge of the positively charged object and increasing the negative charge of the negatively charged object.
Explanation:
edge
Answer:
Your answer is A.
Explanation:
Al+3 and I-
what is the chemical formula and what is the name of the compound
Answer:
AlI3 is the chemical formula and the name of compound is Aluminium iodide.
The sun has been up for several hours , and it has been shining on these trees . What can the trees do because they are in sunlight?what does this mean for the number of energy storage molecules in trees?
A. Give off air. Giving off carbon allows them to make energy storage molecules
B.give off. Giving off carbon uses up energy storage molecules
C.take in carbon from the air . The carbon s used to make energy storage molecules
D.take in carbon from the air , the carbon is used to break down energy storage molecules.
E. None of Above.
Clouds are made up of tiny droplets of water. Which two spheres are clouds a
part of?
A. Biosphere
B. Geosphere
C. Hydrosphere
D. Atmosphere
Which of these elements would form an ion with a charge of -1?
Group of answer choices
K
C
F
Answer:
k
Explanation:
that is shide rong and shide right
Which part of the atom is most directly involved in chemical bonding?
Answer:
Electron
Explanation:
Explain the rise and fall of the kingdom of Aksum
Answer
Rise: The kingdom of D'mt populated the majority of the Northern horn which had developed much agriculture and expansion of trade with other empires like Egypt. After the fall of the D'mt kingdom many small kingdoms took its place and slowly came together as one large kingdom called, Aksum. Aksum rose to power in the first century after the son of a Solomon queen had expanded to the land near the red sea.
Fall: The empire had become isolated from civilizations when it came to trade after battling Arabian armies. Their religion segregated them and caused the downfall of their power over the trading ports on the Red Sea.
For more information, go here: https://storymaps.arcgis.com/stories/9b7b377398724be99a0d94dfa9f55550
A loose pile of rocks and soil travels in a single large mass the mass moves a short distance downhill which mass movement does this describe
A. Creep
B. Erosion
C. Landslide
D. Slump
Which of the following naming systems would you use to nameHClO2?
Question 6 options:
a)
HYDRO________IC ACID
b)
HYDROGEN _________IDE
c)
________________IC ACID
d)
________________OUS ACID
Which diagram correctly shows the orbits of the Sun, Earth, and Moon in the geocentric model of the solar system?
Answer:
A.
Explanation:
This is the closest to what Ptolemy drew.
B would have the sun and moon in equal orbits, but the moon changes wouldn't be accounted for
C and D have the sun in the middle, so they are both heliocentric.
The diagram that correctly shows the orbits of the Sun, Earth, and Moon in the geocentric model of the solar system is A and the correct option is option A.
What is Geocentric model of Solar System?In the geocentric model of the solar system, the Earth is considered to be the center of the solar system.
The Moon, the planets, the Sun, and the stars all rotate around the Earth (which stays still), with uniform circular motion. They compose the heavens, which are considered to be ethereal and unchanging.
Therefore, the diagram that correctly shows the orbits of the Sun, Earth, and Moon in the geocentric model of the solar system is A and the correct option is option A.
Learn more about Geocentric Model of Solar System, here:
https://brainly.com/question/28608924
#SPJ3
PLEASEEE HELP THIS IS SCIENCE
I WILL MARK U BRAINLIEST OF UR CORRECT
Answer:
1. C
2. B
3. B
4. Graph b, option D
Explanation:
Answer:
11. chloroplasts and a cell wall
17. microbes
1. increased
2. Graph b
Explanation:
I put them in the order u asked the questions btw.
Which of the following will neutralize an acid?
Question 20 options:
a)
LiOH
b)
H2O
c)
H2SO4
d)
HCl
why there might be something else in the water besides the reddish-brown substance?
Answer:
Tbe reddish brown substance might be the rust that formed overtime in a iron tap and over the course of time mixed with other dust and particles it might have formed another substance .
The reddish brown substance is iron oxide which is formed by the reaction of iron materials with water and air. This oxide layer above the surface of metallic parts is called rust.
What is iron oxide ?The Fe is a reddish metal more reactive towards the air and water as well. Fe is a very common in the manufacturing of many household materials. However, by the action of air and water these metallic parts undergo corrosion.
Corrosion is a chemical change involving the formation of oxide layer over the metallic surface which eventually corrode the substance and make it unusable.
Fe reacts with oxygen of water or air forming the reddish brown iron oxide Fe₂O₃ that is what called the rust. Rust can be seen in needles, vehicle parts made of iron etc.
Find more on corrosion:
https://brainly.com/question/28302789
#SPJ2
How many moles of hydrogen gas (H2) are required to react completely with 0.75 moles of nitrogen
gas (N2)?
Answer:
2.25 moles H2
Explanation:
The equation N2+ 3H2 > 2NH3
1 mol of N2 gives 3 mol of H2
Then
. 75 mole N2 give 3*.75 = 2.25 moles of H2
if 67.8 moles of gas was measured out into a helium balloon how many molecules would be present within the balloon
Answer:
[tex]4.08x10^{25} molecules[/tex]
Explanation:
Hello there!
In this case, since the understanding of the mole-molecules relationships is analyzed via the Avogadro's number:
[tex]1mol=6.022x10^{23}molecules[/tex]
Next, we can solve the following setup by starting with the 67.8 moles of helium and obtaining the required molecules as follows:
[tex]67.8mol*\frac{6.022x10^{23}molecules}{1mol}\\\\=4.08x10^{25} molecules[/tex]
Best regards!
What is the mole fraction of each component of a gas mixture that contains sulfur trioxide at a pressure of 1.45 atm and sulfur dioxide at a pressure of .32 atm
Answer:
[tex]x_{SO_3}=0.82\\\\x_{SO_2} =0.18\\[/tex]
Explanation:
Hello there!
In this case, according to the given information, it is possible for us to solve this problem by using the Dalton's law which allows us to calculate the mole fractions by dividing the partial pressures over the total pressure. In such a way, we plug in the given pressures of sulfur trioxide (SO3) and sulfur dioxide (SO2) to obtain:
[tex]x_{SO_3}=\frac{1.45atm}{1.45atm+0.32atm} =0.82\\\\x_{SO_2}=\frac{0.32atm}{1.45atm+0.32atm} =0.18\\[/tex]
Best regards!
which word means the opposite of boiling melting
i need help on this question
NO LINKS!
Answer:
2 experimental
Explanation:
That big lorry hit the new car.change to passive voice
What are some ways organisms in a cave can receive nutrients?
Pls help!!!!
If you start with 30.0 grams of sodium fluoride, how many grams of magnesium fluoride will be produced?
Answer:
22.2 g of MgF₂
Explanation:
We star from the reaction:
NaF → sodium fluoride
Mg → Magnesium
2NaF + Mg → MgF₂ + 2Na
2 moles of sodium fluoride react to 1 mol of Mg in order to produce 1 mol of magnesium fluoride and 2 moles of sodium.
We convert mass of the reactant to moles:
30 g . 1mol / 41.98 g = 0.715 mol
We assume that Mg is in excess
As ratio is 2:1, if we have 0.715 moles of NaF we may produce the half of moles, of MgF₂
0.715 mol /2 = 0.357 moles of MgF₂
We convert moles to mass: 0.357 mol . 62.30g /mol = 22.2 g
Select the correct mass for each of the samples described below.
3.01 × 1023 molecules H2O
Answer:
9.00 g H2O
Explanation:
Convert molecules to grams using stoichiometry
(3.01 * 10^23 molecules) * (1 mole H2O / 6.022 * 10^23 molecules) * (18.01 g / 1 mole H2O) = 9.00 g H2O
Answer:
answer in picture
Explanation:
(Thermodynamics question) When dynamite and oxygen create an explosion, the q value for the system (reactants), would be __
a. positive
b. negative
c. zero
What volume of NaOH(aq) would be needed to reach the equivalence point if the concentration of the added base were 0.290 M?
Answer:
17.2mL are needed
Explanation:
The pH curve for titration of 50.0 mL of a 0.100 M solution of hydrochloric acid
A strong acid as HCl reacts with a strong base as NaOH producing water and a salt. The chemical equation is:
HCl + NaOH → H₂O + NaCl
Where 1 mole of HCl reacts per mole of NaOH
To solve this question we must find the moles of HCl added = Moles NaOH you must add to reach the equivalence point. With these moles and the molar concentration we can find the volume that would be needed as follows:
Moles HCl:
50.0mL = 0.0500L * (0.100moles / L) = 0.00500 moles HCl = Moles NaOH
Volume NaOH:
0.00500 moles NaOH * (1L / 0.290moles) = 0.0172L NaOH =
17.2mL are needed