answer:
protein i think
explanation:
protein has a long chain of amino acids
Answer:
B. lipid
Explanation:
Got it right.
what is an epicenter of an earthquake
Answer:
It's the epicenter of an earthquake!
p.s. basically that means it's the center
Answer:
the epicentre of an earthquake is the location directly above the hypocenter the surface of the earth (p.s the hypocenter is the location where an earth quake starts )
:)
Why is water called.compound
Answer:
because it's composed of two elements, hydrogen and oxygen. water is technically a molecular compound tho, for it has two hydrogens.
When collecting temperature as a function of time for the reaction of KOH with HCL, which time is most significant
Answer:
At the completion of reaction.
Explanation:
The time when the reaction take places is the most significant time for measuring temperature of the solution because on this time the temperature will decrease or increase. Some reactions releases heat energy upon completion we called them exothermic reactions whereas some absorb heat energy from the surrounding, decreases the temperature which is known as endothermic reaction so measuring temperature at the completion of reaction is the correct time.
The number of protons is equal to
a the number of neutrons.
b the atomic mass.
c the number of electrons.
d the atomic number.
Answer:
c the number of electrons
6) Which type of orbital is represented by this image?"
Z,Y,X
Answer:
the immage is not uploaded
How many grams are found from 2 moles of glucose C6H1206?
Answer:
360g
Explanation:
Hope it helps you!
What two gases are cycled through ecosystems?
[tex]\huge\tt \blue{❥Answer}[/tex]
Photosynthesis converts carbon dioxide gas to organic carbon, while respiration cycles the organic carbon back into carbon dioxide gas.
______________________________
~ ʜᴀᴘᴘʏ ʟᴇᴀʀɴɪɴɢ ~
Temperature is a measurement of :
1) total energy in a system
2) the average kinetic energy of a system
3) the average potential energy of a system
4) the ability to do work
Answer:
Temperature is a measure of the average kinetic energy of the particles in an object. When temperature increases, the motion of these particles also increases. (That should give you the answer if you read closely first sentence)
Can somebody just name all the metalloids, gases, and liquids that are on the periodic table. please this is due in a hour!!!
Answer:
There are six liquid elements present in the periodic table. They are bromine,mercury ,caesium,gallium,rubidium and francium.
The metalloids; boron (B), silicon (Si), germanium (Ge), arsenic (As), antimony (Sb), tellurium (Te), polonium (Po) and astatine (At) are the elements found along the step like line between metals and non-metals of the periodic table.
The gaseous element group; hydrogen (H), nitogen (N), oxygen (O), fluorine (F), chlorine (Cl) and noble gases helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn) are gases at standard temperature and pressure (STP).
Explanation:
Which is a disadvantage of using chemical indicators?
They are expensive to use.
They measure pH directly.
They must be selected for a narrow pH range.
They do not use electricity to operate.
WILL AWARD BRAINLIEST FOR FIRST CORRECT ANSWER!
Answer:
They must be selected for a narrow pH range.
Explanation:
Indicators are compounds that change to a specific colour in a solution within a specific pH range.
The chemical indicators does not give the exact value of pH. They only provide the range of pH. They must be selected for a narrow pH range. The correct option is C.
What is chemical indicator?The acid base indicators or neutralization indicators are substances which are employed for the visual detection of the end point on the basis of their ability to change colour during the pH change that occurs in vicinity of the end point.
The chemical indicators are usually weak organic acids or bases which change colour in characteristic pH ranges. The particular range or interval of pH in which an acid-base indicator changes its colour is known as the colour-change interval.
Methyl orange is a weak base which changes its colour in the pH range 3.1-4.4 being red below pH 3.1 and yellow above pH 4.4.
Thus the correct option is C.
To know more about chemical indicators, visit;
https://brainly.com/question/13748767
#SPJ6
how many protons electrons and neutrons does the following isotopes contain 1H+
Answer:
The other name for this isotope is a proton. This is because it contains just a single proton.
Explanation:
H+
Protons = 1
Electrons = 1 - 1 = 0 (The + sign means it has lost a single electron)
Neutrons = 0
Which of the following elements will have its valence electrons represented in figure B?
A. Boron
B. Phosphorus
C. Chlorine
D. Manganese
Answer:
Answer is B
Explanation:
What is the mass of water released by the heating? Show your work or explain your reasoning.
Answer:
Dividing the mass of the water lost by the original mass of hydrate used is equal to the fraction of water in the compound. Multiplying this fraction by 100 gives the percent water in the hydrate.
Explanation:
The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
What is mass ?The proportion of matter that makes up an object is quantified by its mass. The kilogram, or kg, would be the fundamental SI unit of mass.
What is hydrate?Any substance that contains water through the form of H2O molecules is referred to as a hydrate. This water content by weight can vary, but it is typically fixed. The most well-known hydrates seem to be crystalline solids which decompose once the attached water is removed.
Therefore , The amount of water throughout the compound has been determined by dividing the mass of water wasted mostly by original quantity of hydrate used. The above fraction can be multiplied by 100 to get the hydrate's water content in percentages.
To know more about mass and hydrate.
https://brainly.com/question/11202174
#SPJ3
HELP ITS DUE IN AN HOUR!!
What is a lattice position?
Explain
Explanation:
Crystallography. an arrangement in space of isolated points (lattice points ) in a regular pattern, showing the positions of atoms, molecules, or ions in the structure of a crystal.
If an atom experiences sufficient thermal activation, it can move to a neighboring lattice position.4 If the vibration frequency of the atom is v and the atom has Z nearest neighbors, the total number of jump attempts is vZ. However, only a small fraction of the attempts will be successful, with a probability depending on the ratio between the necessary activation energy for a single jump QD and the thermal activation kBT. The effective jump frequency ΓD is then
(5.6)
With each successful jump, the atom travels one atomic distance λ and the total traveling distance in unit time is thus ΓDλ. Substituting the jump frequency ΓD into the expression for the root mean square displacement of a random walker [equation (5.5)] and using the spatial coordinate r leads to
i need help with d and e
Answer:
D: False
E: Ethane
Explanation:
40 points plz help quick!! Order the interactions from strongest to weakest.
1. Covalent Bond
2. Ionic Bond
3. Dipole-Dipole Interactions
4. Hydrogen Bond
5. Dispersion forces
Answer:
2,5,4,1,3
Explanation:
Answer:
Ionic Bond
Explanation:
PLEASE HELP ME ASAP!!!!!! YOU GET 10 POINTS!!!!!!
For reaction below, describe how its equilibrium could be shifted in the indicated direction.
1. H2(g)+C12(g)<---------->2HC1(g)+thermal energy: shift to the left
2.C(s) +O2(g)<---------->CO2+thermal energy: shift to the right
Answer:
Here is the ANSWER KEY, it may also has other of the questions you don't know :)
Explanation:
https://sciencewithhorne.weebly.com/uploads/5/7/3/5/57358947/unit_11_hw_key.pdf
Two rocks one weighing 100m and the other weiging 200n are drpped from a 50-m cliff at the same time when both rocks are 10m from the ground and air friction is ignored which is the same
Answer:
Ignore all friction
I’ll mark BRAINLIEST! Please help!
Answer:
theirs nothing there?!!!??!?!?!??!!?!?!?!?!??!?!??!?!?!??!?!
Explanation:
whys it just a blank picture
Why would the presence of oxygen bubbles be a good indicator of photosynthesis occurring?
kdjsbjsof in bwjfiejwnjfifihdhwhbsd
Most of the deserts on the Earth are located around 30°N & 30°S latitude. This is because air is ( rising / sinking ) at these locations.
Answer: We live at the bottom of a gaseous envelope the atmosphere--that is bound gravity to the planet Earth. The circulation of our atmosphere is a complex process because of the Earth's rotation and the tilt of its axis. The Earth's axis is inclined 23.5° from the ecliptic, the plane of the Earth's orbit around the Sun. Due to this inclination, vertical rays of the Sun strike 23.5° N. latitude, the Tropic of Cancer, at summer solstice in late June. At winter solstice, the vertical rays strike 23.5° S. Latitude, the Tropic of Capricorn. In the Northern Hemisphere, the summer solstice day has the most daylight hours, and the winter solstice has the fewest daylight hours each year. The tilt of the axis allows differential heating of the Earth's surface, which causes seasonal changes in the global circulation. On a planetary scale, the circulation of air between the hot Equator and the cold North and South Poles creates pressure belts that influence weather. Air warmed by the Sun rises at the Equator, cools as it moves toward the poles, descends as cold air over the poles, and warms again as it moves over the surface of the Earth toward the Equator. This simple pattern of atmospheric convection.
list 2 ways mechanical energy can be transformed into non-mechanical energy ?
Answer:
One is the classic example of friction. When two surfaces rub together, they generate thermal energy, or heat. This is a transformation of the mechanical kinetic energy of the objects into the thermal non-mechanical energy (which is small-scale kinetic energy).
Mechanical energy can be used to overcome friction or lost in form of heat in machine parts. Friction and heat are two non-mechanical energy.
Transformation of mechanical energy into non mechanical energy
Based on the principle of conservation of energy, energy can neither be created nor destroyed but can be transformed from one form to another.
Two ways mechanical energy can be transformedThe two ways mechanical energy can be transformed include the following;
FrictionHeatMechanical energy can be used to overcome friction or lost in form of heat in machine parts, in this process, the mechanical energy (kinetic energy) would be converted into other forms of energy such as heat.
Learn more about conservation of energy here: https://brainly.com/question/166559
Directions Identify the reactants and product in the following reaction.
4A1+302 → 2A1203
13 Consider this neutralization reaction.
H2SO4 + 2KOH → K2SO4 + 2HOH
Which compound is the salt produced in this
reaction?
(1) KOH
(2) H2SO4
(3) K2SO4
(4) HOH
Explanation:
The answer to the question is (3) K2SO4
Pls help will give brainlist
Answer:
D. 5
Explanation:
The coefficient will almost always be the whole number in front of the variable.
example
5(x)= 7
The coefficient would be 5.
En una planta de energía, se produce CO2 gracias a la reacción de combustión del material orgánico con oxígeno para producir CO2, SO2, SO3, NO, NO2 y H2O que son los causantes del efecto invernadero, el SO2 reacciona con H2O para formar H2SO3, causante de la lluvia ácida. En condiciones de gas ideal el SO2 se encuentra a una temperatura de 100°C y 0,5 atm de presión, el volumen ocupado generalmente es de 25 L. 5. La ecuación para hallar el número de moles debe ser: a. Gases ideales: relación entre todas las variables que influyen sobre los gases b. Boyle: relación entre volumen y presión c. Charles: relación entre el volumen y la temperatura d. Gay Lussac: relación entre la presión y la temperatura
Answer:
a. Gases ideales: relación entre todas las variables que influyen sobre los gases
Explanation:
La ecuación del gas ideal da la relación entre las variables; presión, volumen, temperatura y número de moles.
Según la ecuación del gas ideal; PV = nRT
P = presión del gas
V = volumen del gas
n = Número de moles del gas
R = constante de gas
T = temperatura del gas
El número de moles de SO2 se obtiene de;
n = PV / RT
n = 0,5 * 25 / 0,082 * 373
n = 12,5 / 30,586
n = 0,41 moles
1. A wave has a frequency of 800 Hz and a wavelength of 2000 cm. What speed
is this wave traveling?
Answer:
V=f*(wavelength)
V= (800)(20m)
16000m/s
Explanation:
What does chemistry mean?
Answer:
The definition of chemistry is a branch of science that deals with the form and properties of matter and substances or the interaction between individuals.
Why is there no answer
Answer:
i don't know
Explanation:
If magnesium and nickel were used as electrodes to construct an electrochemical cell like the one shown at right, which metal would form the anode and which the cathode?
anode:
cathode:
Answer:
anode: magnesium
cathode: nickel
Explanation:
edg. 2021