Answer: vulnerability scanners
Explanation:
The tool tool that can be used to discover vulnerabilities or dangerous misconfigurations on ones systems and network is referred to as the vulnerability scanner.
Vulnerability scanners are simply referred to as automated tools that is used by companies to know whether their systems or networks have weaknesses that could be taken advantage of by cyber thieves or other people and can expose such companies to attack.
Major innovations made from the establishment of abucus to the 5th computer generation
Answer:
Cogs and Calculators
It is a measure of the brilliance of the abacus, invented in the Middle East circa 500 BC, that it remained the fastest form of calculator until the middle of the 17th century. Then, in 1642, aged only 18, French scientist and philosopher Blaise Pascal (1623–1666) invented the first practical mechanical calculator, the Pascaline, to help his tax-collector father do his sums. The machine had a series of interlocking cogs (gear wheels with teeth around their outer edges) that could add and subtract decimal numbers. Several decades later, in 1671, German mathematician and philosopher Gottfried Wilhelm Leibniz (1646–1716) came up with a similar but more advanced machine. Instead of using cogs, it had a "stepped drum" (a cylinder with teeth of increasing length around its edge), an innovation that survived in mechanical calculators for 300 hundred years. The Leibniz machine could do much more than Pascal's: as well as adding and subtracting, it could multiply, divide, and work out square roots. Another pioneering feature was the first memory store or "register."
Apart from developing one of the world's earliest mechanical calculators, Leibniz is remembered for another important contribution to computing: he was the man who invented binary code, a way of representing any decimal number using only the two digits zero and one. Although Leibniz made no use of binary in his own calculator, it set others thinking. In 1854, a little over a century after Leibniz had died, Englishman George Boole (1815–1864) used the idea to invent a new branch of mathematics called Boolean algebra. [1] In modern computers, binary code and Boolean algebra allow computers to make simple decisions by comparing long strings of zeros and ones. But, in the 19th century, these ideas were still far ahead of their time. It would take another 50–100 years for mathematicians and computer scientists to figure out how to use them (find out more in our articles about calculators and logic gates).
Explanation:
5. What is a domain name used for?
Answer:
Domain names serve to identify Internet resources, such as computers, networks, and services, with a text-based label that is easier to memorize than the numerical addresses used in the Internet protocols. A domain name may represent entire collections of such resources or individual instances.
Explanation:
*Hope this helps*
HELP ME!!! I WILL GIVE BRAINLY THINGY!!!
What does the code if (num2==50){ do?
Answer:
What subject is this?
Explanation:
PLEASE HURRY!!
Look at the image below!
What is globalization? O A. A constant change in weather patterns that is occurring all over the globe OB. A movement for countries to turn to an economy based on bartering C. The movement from many local economies to one economy that is global O D. The tendency for global companies to create small local businesses
Answer:
The movement from many local economies to one economy that is global
Explanation:
Globalization is when companies and governments from around the world come together through interaction.
A CD and a DVD are both secondary storage devices, explain to a friend the difference between both
Answer:
i dont have any friends to explain it to
Explanation:
2. Media sharing websites let you post photos and videos to share with other people. What are the benefits and drawbacks of using these websites?
Media sharing websites let you post photos and videos to share with other people. The benefit is that we are up to date and get all the news as well as information worldwide.
What is company's website?The website of the company is all web sites which is operated by any occupied company or via any occupied company conducts the business. Any business website is a website that is designed in such a way that it can represent the identity of a business on the internet.
Company's name and fame id totally depends upon advertisement and its products and websites play an important role in order to make company popular and due to this reason company used the website or designed the website in unique and knowledgeable manner.
Therefore, Media sharing websites let you post photos and videos to share with other people. The benefit is that we are up to date and get all the news as well as information worldwide.
Learn more about website here:
https://brainly.com/question/19459381
#SPJ2
You are running an 802.11g wireless router in mixed mode. You have three 802.11g wireless NICs connected to the router. A new user connects to an 802.11b wireless NIC. What will happen
Complete Question:
You are running an 802.11g wireless router in mixed mode. You have three 802.11g wireless NICs using the router. A new user connects using an 802.11b wireless NIC. What will happen?
Group of answer choices.
A. The user with 802.11b will access the network at 11Mbps while the users with 802.11g will access the network at 54 Mbps.
B. The user with 802.11b will not be able to communicate on the network.
C. The user with 802.11b will access the network at 11 Mbps. The users with 802.11g will access the network at 54 Mbps unless they are communicating with the 802.11b device,which will be at 11 Mbps.
D. All users will access the network at 11 Mbps.
Answer:
D. All users will access the network at 11 Mbps.
Explanation:
A 802.11g is one of the wireless network standards developed by the Institute of Electrical and Electronics Engineers (IEEE) which operates on a 2.4 GHz microwave bandwidth and as a result can only transmit over a short distance. The 802.11g has a data transfer rate or throughput of 54 megabits per seconds (Mbps).
Basically, the 802.11b is a similar standard to the 802.11g wireless standard that typically allows the transmission (transfer) of data for up to 11 megabits per seconds (Mbps).
In this scenario, you are running an 802.11g wireless router in mixed mode. You have three 802.11g wireless NICs using the router. A new user connects using an 802.11b wireless NIC.
Hence, what will happen is that, all the users will access the network at 11 Mbps.
The Internet:
O A. only gives us access to our local communities.
O B. hinders our ability to influence people.
O C. limits us to local social networking sites.
O D. enables us to join global online communities.
Answer:
D- it enables us to join global online communities.
Explanation:
Thanks to social media and other websites, content you produce can be seen all over the world.
PLEASE ASAP!!
Today, most film editors manually cut and splice the actual film footage once it arrives.
O True
O False
Answer:
True
Explanation:
edg2021
The film editor is such an important person on a film that he is often hired before the cast and other crew. This editor is responsible for revising the filmed footage until it becomes the finished film. The editor begins by reading the script to get familiar with the story. It is important for the editor to know the script because film scenes are generally shot and edited out of sequence. When footage begins to come in, the editor reviews the footage and production notes provided by the director and production team. These notes contain details about the footage and the director’s comments about the footage. The editor then uploads or transfers the footage to computers in the editing bay and begins editing the footage into finished scenes. The editing bay is the control room with editing equipment, computers, monitors, and sound system where film editors manipulate plot, sound, graphics, and score to produce a well-constructed scene. This is a painstakingly detailed and time-consuming task
Food deliveries should be scheduled _____.
Answer:
1-11pm
Explanation:
Answer:
at less busy times so that staff has time to properly inspect food
Explanation:
How do you do that ( the bit that I circled in the picture)
Which scenarios are examples of students managing their time well? Check all that apply. A student studies while watching her favorite television shows. A student sets aside time to study every afternoon at his desk. O A student writes down some goals that she hopes to achieve in school. A student drafts a study schedule that includes breaks. A student uses her desk calendar to record the due dates for her homework assignments. O A student rushes through his homework while sending text messages to friends. 3). Intro
Answer:
b,c,d, and e
Explanation:
Hope this helps
Answer:
BCDE
Explanation:
EDG 2021
What is the other name of the horizontal column graph?
graph is also known as the horlzontal column graph.
Answer:
Side Graph mabye?
Explanation:
Answer:
A bar graph.
Explanation:
A bar graph is also known as the horizontal column graph.
PLS HELP BEING TIMED!!!
Complete the following sentence.
The basics of managing money such as balancing a checkbook and making a budget are _____
skills
Answer:
Bank Rate skills
Explanation:
because it is i believe
Which of the following identifies the most appropriate courses to take in high school for someone interested in becoming a mechanical engineer?
drafting- and math-related courses
math- and science-related courses
computer- and design-related courses
science- and computer-related courses
Answer: New questions in Health
Which member of the multidisciplinary team would help a patient improve his flexibility in the joints after a knee-replacement surgery? A. a physiot…
What are two advantages of a multidisciplinary team approach? better diagnosis in complex cases shared responsibility for decisions more opportunit…
MARKING PEOPLE AS BRAINLIST PLEASEEE HELP Where is the carbon dioxide picked up and the oxygen unloaded in the body? A:Arteries B:Veins C:Capillar…
Which healthcare professional would be primarily responsible for treating a patient for his anxiety disorder after a surgery? A. a nurse B. a nutr…
Do Now: What might be a situation where it might be important to identify 3 points somebody? What are different strategies that scientists could use …
Explanation:
The ______ occurs in first-come-first-served scheduling when a process with a long CPU burst occupies the CPU. Group of answer choices
Answer:
convoy effect
Explanation:
The Convoy effect is an episode in Operating System, in which if the burst time of the first process is high among all the processes, then it effects the First-Come-First-Serve algorithm.
Just like in real incidents, when a convoy is heading first in the slows down the vehicles behind; same happens in the Operating System. If long CPU burst occupies first in the ready queue, then it slows, or even in some cases, block other low processes. This effect is also known as starvation.
Therefore, the correct answer is convoy effect.
What are the advantages and disadvantages of top-down and bottom-up programming? How would you decide which one to use? Do you approach problems in your real life from a bottom-up or top-down approach?
Answer:
Question: What are the advantages and disadvantages of top-down and bottom-up programming?
Answer:
Top-down programming is a process of writing programming codes that contain specific instructions for a computer to carry out the instructed task. Usually, Top-down programming comes as software that enables the division of problems that are initially complex into simpler parts. An example is a kind of software developed to give loans to worthy clients. The software may be broken down further to check the bank statements of the client, calculate the earning and spending capacity of the client, Amount paid on utilities.
Advantages of Top-down programming:
1. Top-down programming makes teamwork possible as a system is divided into sub-systems which individuals can handle separately before merging the sub-systems together.
2. Checks and testing become easy.
Disadvantages of Top-down programming:
1. Breaking systems into parts may be time-consuming as there is a need for more planning before working on individual sub-systems.
2. Error could be possible.
Bottom-up programming is a software of a method of design which is opposite to what the top-down programming does as the bottom-up programming works on the sub-systems first and then combine later into a bigger system. This makes use of the existing resources with the aim of generating a bigger result.
Advantages of Bottom-up programming:
1. Adaptability - Bottom-up programming makes adaptability easier.
2. When used in a company it gives all workers the room to make a contribution towards achieving bigger results, improving operations generally.
3. It makes one start a bigger project with the available resources.
Disadvantages of Bottom-up programming:
1. Result could be affected as some workers lack the needed experience to execute some tasks successfully.
2. Lack of desired unity among workers with differences in objectives resulting to endangering the result.
Question: How would you decide which one to use?
Answer:
It depends on the picture of how the result would look like, the goal of the organization employing it, the skill-set among workers available to do the task, the nature of the task. If a larger goal is to be achieved, smaller sub-systems could be used and joined at the end to get a system meaning bottom-up programming would be used. In cases for instance where output is to be determined for instance staff salaries, the output would be broken into simpler units to allow solutions for separate units then we could use top-down programming.
Question: Do you approach problems in your real life from a bottom-up or top-down approach?
Answer:
I approach problems from a top-down approach because it allows checks and testing easy, and the act of breaking systems into sub-systems makes it easy for me to approach each sub-system with a result-oriented plan.
Answer:
Some advantages of top-down are that you can start off from what you know and figure out what you need to complete it, the advantage to bottom-up is that you can make something new . if you are starting something from scratch and you don't know what the end goal might be you would use bottom-up but if you already have an idea or the final product of what you want you would go with the top-down approach.
Hope this helpedHave a great day!
Nick is moving from Alabama to Texas. A friend of his remarked that Nick may have to pay higher taxes there. What is the cheapest and quickest
way for Nick to find out if his friend is right?
А.
hire a lawyer
B.
speak to an accountant
C.
talk to other friends
D
look up the Texas state website
Answer:
d is look up the Texas state website
Explanation:
because tell u about texas and taxes
how do I take a picture of myself on an apple computers?
Answer:
with the camera
Explanation:
Answer:
press the camera and take a pic??
Explanation:
Can someone help me get spotify premium
Answer:
Yes just go to spotify and pay for spotify premium.
Explanation:
Answer:
Buy it, go to the app store or google play and it will surely pop up like a sign saying premium.
Explanation:This is so hard :/
help plz, u just gotta select all that apply :)
Answer:
Concept: Graph Analysis
We want to know all those that produce around 0.01 kg: Parsly, Coriander, Mint, Strawberry Rate positively and give brainlistanswer this now
and thanks
Answer:
the process of burning something
Answer:
Option D) the process of burning something
Explanation:
Combustion, or burning, is a high-temperature exothermic redox chemical reaction between a fuel and an oxidant, usually atmospheric oxygen, that produces oxidized, often gaseous products, in a mixture termed as smoke.
Why are backlinks a useful way to see if information on a website is reliable
Answer: It would help because the backlink could have the necessary details about the information being told. Hope it helps!
Imagine you're in charge of managing an annual fest at your school. You have to select students and assign them different tasks. Write a short essay on the qualities and traits you would be looking for while selecting students. Explain why you think these qualities and traits are important. Also, describe how the lack of such qualities and traits would affect the work.
Answer:
Quality traits are important in many ways. A persons traits identifies them of how they treat you or how you might treat them. It is important to find good working people for the job. For example if one student is good at a specific task I might put them in that task or if another is good at stocking shelves or finding books I might put them in the library to help students find books. It is important as a supervisor to find people that listen and follow instructions not people that mess around and are unorganized. These qualities and traits are important to see the real potential of the employees. Finding the right people for the job will help the school and you as the supervisor to manage these employees. Making a application or employment sheet will help to find the right people making a sheet with some questions and have the potential employees fill it out to find their traits and skills.
Explanation:
Sorry I didn't have much background information on what you wanted me to write hope this works you can edit and change stuff though.
Also run this through Grammarly's plagiarism tester to see if it is plagiarism!
The French horn was originally used as a hunting horn.
A. True
B. False
Subject: Music Technology.
Answer:
A. True
Explanation:
The French horn is a brass instrument delivered from the hunting horn. The first development of the instrument was in service of the hunt or signal of danger. Additionally, they were used in Jewish religious rituals. It was less complex than the instrument used today. Around the beginning of the 18th century, it started to be widely used as a musical instrument.
Today, it is played by the musicians called hornists, and there are usually four horns in the symphony orchestra. There are few variations of the instrument – single horn, double horn, compensating double horn, and triple horn.
Why does it matter if a network is set up as a LAN, or a WAN?
Answer:
A small office or business will typically only need a LAN. The local network will ensure that different files can be transferred through your office leading to a connected business environment. If you have a larger business or multiple branches, that's when you're going to need a WAN. -Google.
Answer:
A small office or business will typically only need a LAN. The local network will ensure that different files can be transferred through your office leading to a connected business environment. If you have a larger business or multiple branches, that's when you're going to need a WA
Explanation:
⚠️ HURRY TIME IS TICKING ⚠️
Sierra needs to ensure that when users are entering data into a datasheet or form that they are limited in the values that they select. Which option should she use as the data type?
• Lookup list
• Bound value
• Short-text
• Date/time
Answer:
To ensue that data entering data is limited, Usually A dropdown list is used but here in the available option
Lookup list is correct.
Explanation:
Let explain why we have selected Lookup list
A lookup list is used to look for some value in a list.
For example in Excel we select a column for search which is basically limiting the value which we search.
Bound Value
we usually have 2 bounds ,
lower and upper bound
lower bound is the smallest value in a set while upper bound it the highest value in a set.
Short Text:
Short text is used to minimize the word.
For example instead of United States we simply write US
Date/Time are used for data/time value.
so the most appropriate answer is Lookup list.
If you would like to compare information on two different Web pages, you should _____.
scroll through the pages
the home page
use tabs
organize bookmarks
Answer:
Use Tabs
Explanation:
I had this lesson on odyessy ware and this was right the other guy is wrong
Answer:
Use Tabs is also correct on Edge nuity
Explanation:
i have Keyboarding and Apps
list and explain three computing devices from the 20th century
Answer:
Calculating Machine
Graphic tablet.
Touchscreen
Explanation:
Hope this helps.
Brain-List?
Answer:
1. The First Calculating Machine (Pascaline)
2. Jacquard's Loom
3. The First Pocket Calculator
Explanation:
1. Pascaline was the first calculator or adding machine to be produced in any quantity and actually used. It was deigned at about 1642-1644.
2. Jacquard Loom is an attachment for powered fabric looms
3. The first truly pocket-sized electronic calculator was the Busicom LE-120A "HANDY" It was marketed in 1971.