Answer:
I'm going to try to explain it to you easy as possible so basically when a motor is placed between two poles of another magnet a current from a voltage flow to the coil and a magnet field is produced around the electromagnetic and the poles of the magnet interact with the poles from the electricmatic causing the motor to turn in more coils growing stronger into the motor
A 35kg cannonball sits at rest on a flat level surface. What is the normal force exerted on the cannon ball. Use -9.8 m/s2 for acceleration due to gravity.
A. -343N
B. 44.8N
C. 25.2N
D. 343N
Answer:
a) N = 343 [N]
Explanation:
We must remember Newton's third law, which tells us that the force acting on a body is equal to the normal reaction force of equal magnitude but acting in the opposite direction.
[tex]N=m*g[/tex]
where:
m = mass = 35 [kg]
g = gravity acceleration = 9.81 [m/s²]
[tex]N = 35*9.8\\N= 343 [N][/tex]
a car travels 200km in 3.0 hours. Determine the average velocity of the car
Answer:
66.67 km/hrExplanation:
The average velocity of the car can be found by using the formula
[tex]a = \frac{d}{t } \\ [/tex]
d is the distance
t is the time taken
From the question we have
[tex]a = \frac{200}{3} \\ = 66.66666...[/tex]
We have the final answer as
66.67 km/hrHope this helps you
What is the weight of the body under the influence of a force of 10N reaches a speed of 1.5 m / s in 3s?
Answer:
Explanation:
F=ma
F=10N
A=v-u upon t
=1.5-0 upon 3
=0.5m per second squared
Then do force divided by. Accelaration and multiply by gravity.
Light that enters your eye strikes cells in the back of your eye
true
False
Answer: True
Explanation: Light enters your eye through the lens which then hits the retina which is located in the back of your eye.
What is the density of an object with a mass of 20 grams and a volume of 5 cm?
Answer:
4
Explanation:
Divide mass(m) by volume(v), you get density(D)
m/v=D
20/5=4
Keith has been using a software application for a year on his home computer. A new version of the application was recently released. Keith’s license has a term of two years and entitles Keith to upgrade his application to a new version within the term. What type of license does the application have?
Answer:
d license with maintenance .
Explanation:
just took this test. :)
If the atomic weight- # of protons = # of neutrons, then how many neutrons does neon have?
Answer:
atomic weight 20.180
protons 10
neutrons 2,8
Explanation:
A researcher changes the DNA in a soybean plant so that it produces offspring with a resistance to weed killer. Which best describes this scenario? genetic engineering gene therapy cloning selective breeding
Answer:
Genetic engineering
Explanation:
Genetic engineering or also called genetic modification is the direct manipulation of an organism's genome in order to bring about a desirable trait in such organism. In genetic engineering procedure, the organism manipulated is called TRANSGENIC or GENETICALLY MODIFIED (GM) organisms.
In this case, a researcher is said to change the DNA (genetic material) in a soybean plant so that it produces offspring with a resistance to weed killer. This describes a genetic engineering procedure in which the soybean plant is manipulated to yield a desired trait, which is resistance to weed killer.
Answer:
A. genetic engineering
Explanation:
I took the quiz
Question 1 of 25
A bookcase has a mass of 37 kg. What is the weight of the bookcase?
Help please
answers
81.6 pounds rounded or just 81.571 if it needs to be exact
Help me pretty please with a cherry on top!!
Answer:
A. im not for sure hope it helps
Explanation:
This image shows flashlight beams reflecting off a mirror from
different angles. Based on the angles of reflection, choose all pairs of
light rays that correctly match incoming light beams with their
reflected light beams,
Question 2. Based on the image and the angles of reflection shown witch statement is true.
A) When a light ray strikes a mirror, it randomly scattered.
B) light is absorbed by mirrors and reflected directly upwards.
C) light travels in a straight line until lit strikes an object
D) light is reflected back to its source when it strikes an object
Hey I'm working on this test right now, did you ever get the answers?
Which type of wave transfers energy in the same way as a sound wave?
A
Radiation wave
B.
Seismic wave
C.
Heat wave
D.
Light wave
Answer:
Radiation wave
Explanation:
A gun fires a bullet horizontally with a velocity of 90 m/s from a tower. Neglecting air resistance, how far will the bullet travel horizontally in 4 seconds?
Answer:
The distance covered along the horizontal axis is [tex]s = 360 \ m[/tex]
The distance covered along the vertical axis is [tex]h = 78.4 \ m[/tex]
Explanation:
From the question we are told that
The horizontal velocity is [tex]u_x = 90 \ m/s[/tex]
The time considered is [tex]t = 4 \ s[/tex]
Generally the distance which the bullet will cover in the horizontal direction for the given time is mathematically represented as
[tex]s = u_xt + \frac{1}{2}* at^2[/tex]
Here a is the acceleration along the horizontal direction and the value is [tex]a = 0 \ m/s^2[/tex]
So
[tex]s = 90 * 4 + \frac{1}{2}* * 0 * 4^2[/tex]
=> [tex]s = 360 \ m[/tex]
Generally the distance which the bullet will cover in the vertical direction for the given time is mathematically represented as
[tex]h= u_y t + \frac{1}{2}* gt^2[/tex]
Here [tex]u_y[/tex] is the initial velocity of the bullet along the vertical axis and the value is [tex]u_y = 0 \ m/s[/tex]
[tex]h = 0 * 4 + \frac{1}{2}* 9.8 *4^2[/tex]
=> [tex]h = 78.4 \ m[/tex]
what is the kinetic energy of a 1 kilogram ball thrown into the air with an initial velocity of 30 m/s
Explanation:
KE = 1/2 MV ^2
KE = 1/2 * 1 * 30 ^2
KE= 1/2 * 1 * 900
KE = 450 kg m^2/ s^2
please mark me as a brainelist
Answer:
the above pic will help
I have done it in word
I hope it helps mate
mark me brainliest plsss
I will always help you understanding your assingments
have a great day
#Captainpower:)
Name the following ionic compounds: BeCl2
Answer:
Beryllium chloride
Explanation:
I hope this helps!
Can I get branliest?!
Find the displacement of the object moving at v= -2 m/s for t=5s
Answer:
d = - 10 [m]
Explanation:
We must remember that speed is defined as the relationship between the displacement in a given time. In this way, we can propose the following equation.
[tex]v = d/t[/tex]
where:
v = velocity = 2 [m/s]
d = displacement [m]
t = time = 5 [s]
Now replacing:
[tex]d=-5*2\\d=-10[m][/tex]
Please help ASAP, studying for finals.
A racecar rounds a curve on the track at a constant speed of 180 mph. Is the car accelerating?
1)No, its mass is constant.
2)Yes, its mass is constant.
3) No, its speed is constant.
4)Yes, its speed is constant.
Answer:
3)No, it's speed is constant.
12. How many grams of beryllium are needed to produce 36.0 g of hydrogen? (Assume an excess of water.)
Be(s) + 2H, O() → Be(OH)2 (aq) +H,(g)
a
4.00 g
b. 36.0 g
c. 162 g
d 324 g
Answer:
Answer is: 162 g of beryllium.
Chemical reaction: Be + 2H₂O → Be(OH)₂ + H₂.
m(H₂) = 36,0 g.
m(Be) = ?
n(H₂) = m(H₂) ÷ M(H₂)
n(H₂) = 36,0 g ÷ 2 g/mol = 18 mol.
from reaction: n(Be) : n(H₂) = 1 : 1.
n(Be) = n(H₂) = 18 mol.
m(Be) = n(Be) · M(Be).
n(Be) = 18 mol · 9 g/mol = 162 g.
Answer:
Answer is: 162 g of beryllium.
Chemical reaction: Be + 2H₂O → Be(OH)₂ + H₂.
m(H₂) = 36,0 g.
m(Be) = ?
n(H₂) = m(H₂) ÷ M(H₂)
n(H₂) = 36,0 g ÷ 2 g/mol = 18 mol.
from reaction: n(Be) : n(H₂) = 1 : 1.
n(Be) = n(H₂) = 18 mol.
m(Be) = n(Be) · M(Be).
n(Be) = 18 mol · 9 g/mol = 162 g.
These the flow of electrons (the current) and where some of the electrons' energy gets converted into heat. (Lessons 5.01-5.03) electric currents Insulators Resistors Conductors
Answer: The answer is resistors
Explanation: I just took the unit test and it was correct
You use a lever to lift a heavy tree branch. You apply a force of 30 N and the
lever lifts the branch with a force of 120 N. What is the mechanical advantage
of the lever?
A. 4
B. 0.25
C. 2
D. 90
Answer:
D 90 subtract it
Explanation:
Write two forms of mechanical energy
Why doesn’t the force you exert when sitting on a chair cause the chair to move?
a. The floor exerts a balancing force on the chair.
b. The floor exerts too much force on the chair
c. The floor exerts an unbalancing force on the chair.
d. The floor exerts no force on the chair.
Answer:
the answer is A
Explanation:
How much does a 20 kg rock weigh on Earth where g = 9.8 m/s2?
Answer:
[tex]\huge\boxed{196\:N}[/tex]
Explanation:
Mass and weight ain't the same thing. So, for calculating weight we would use Newton's 2nd Law of Motion i.e. Force = Mass × Acceleration.
According to question,
The mass is 20kg
Acceleration is 9.8 m/s^2
Putting the given values into the formula,
F = 20 × 9.8
F = 196N
So, the weight of the rock is 196 N
Hope it helps!<3
How does the electric force between two charged particles change if the
distance between them is reduced by a factor of 2?
A. It is reduced by a factor of 2.
B. It is increased by a factor of 4.
C. It is increased by a factor of 2.
D. It is reduced by a factor of 4.
Answer:
increased by a factor of 4
Explanation:
Which three characteristics do mechanical waves and electrocmagnetic
waves share?
A. The waves begin with a disturbance.
O B. The waves transfer energy from its source.
C. The waves and their energy move outward from the source.
D. The waves and their energy can travel through empty space.
Answer:
It is A, B, and C
Explanation:
I just took the test!
The three characteristics mechanical waves and electromagnetic waves share are:
A. The waves begin with a disturbance.
B. The waves transfer energy from its source.
C. The waves and their energy move outward from the source.
What are mechanical waves and electromagnetic waves?Usually, waves transfer energy from one place to another. Mechanical waves transfers via matter where as electromagnetic waves transfers via light. Both mechanical waves and electromagnet (light) waves measured through amplitude, wavelength, frequency and both will get transmitted, refracted, reflected, absorbed, diffracted when they react with matter. Both the electromagnetic waves and mechanical waves are transverse in nature but the mechanical waves can also be in longitudinal.
So, many characteristics were similar for mechanical waves and electromagnetic waves.
Hence, Option A, B, C are the three characteristics.
Learn more about the waves,
https://brainly.com/question/3101711
#SPJ5
A pulse with a height of 20 cm and a length of 30 cm travels with a speed of 400 cm/s through a spring that has been stretched so it is 800 cm long. If we want to send another pulse through the spring that will have a different speed, which of the bolded words should we change? List all that will change the speed of the wave.
Answer:
To send a pulse of different speed, change the tension or stretch on the spring
Explanation:
A pulse is a single disturbance of a particle is a medium. The pulse has an amplitude or and a pulse length in the medium. The speed of the pulse is dependent on the amount of strain or tension ( stretch) applied to the medium. The speed also determines the length of the pulse but is unaffected by the or amplitude of the pulse.
How to find acceleration?
Answer:
a=(v-u)/t is how you find acceleration.
When a person strikes and lights a match, potential energy in the match is transformed into which types of energy?
electrical and thermal
thermal and radiant
radiant and nuclear
nuclear and kinetic
hurry brainliest ill give 49 points
Answer:
Radiant and thermal
Explanation:
Electrical and thermal don't make sense because you are not using electricity to light the match. Radiant and nuclear is not right because you are not using nuclear energy to light the match. Nuclear and kinetic isn't right because you are using kinetic and you are not using nuclear energy.
Answer:
answer is B. thermal and radiant
Explanation:
just got it right on edge
Please do all of i will give you brainlest and thanks to best answer plz do it right
Answer:
the answer is B
Explanation:
because i had this question in 8th grade
HELP ASAP TIMER
Your younger brother gets a new toy car as a present. He winds up the toy, puts it on the ground and watches it accelerate for 5 seconds. You can explain how to find the net force acting on the toy car for the 5 seconds while accelerating by the following:
a
Use a meterstick and stopwatch to measure the distance the car travels for the 5s.
b
Use a balance to determine the mass of the car. Use a motion sensor to measure the speed of the car at a time of 0s and at time of 5s .
c
Use a balance to determine the mass of the car. Use a meterstick to measure the distance the car travels for the 5s .
d
Use a motion sensor to measure the speed of the car at a time of 0s and a time of 5s . Use a meterstick to determine the distance the car travels for 5s .
Answer:
b Use a balance to determine the mass of the car. Use a motion sensor to measure the speed of the car at a time of 0s and at time of 5s .
Explanation:
The right way to measure the net force on the car is take the measurement of its mass then find the speed of the car within the time 0s to 5s.
This is because the net force acting on car is given as;
Force = mass x acceleration
By using the balance, the mass is determine
Acceleration is the rate of change of velocity with time.
Acceleration = [tex]\frac{v - u}{t}[/tex]
v is the final velocity
u is the initial velocity
t is the time taken
Now,
Force = mass x [tex]\frac{v - u}{t}[/tex]