Answer:
A
Explanation:
Which organism in a food web would be best described as a recycler?
O A.
Cottontail rabbit
B.
Termite
C.
Fungi and bacteria
D.
Red fox
C,
takes dead things, makes them into other things
Science
How is the total magnification of a
cell calculated?
how could you get the crystals in a supersaturated solution back into the solution?
Glucose is a compound made from three elements: carbon, oxygen, and hydrogen. For glucose to be broken down into these elements, it must undergo _____.
A. filtration or distillation
B. an irreversible physical change, such as tearing or slicing
C. a reversible physical change, such as boiling or melting
D. a chemical change
Answer:
D ) Chemical Change
Explanation:
1. If CO2 is being produced in the solution at a faster rate than H2CO3, is the rate of the forward or reverse reaction faster?
Answer:
I believe that it would be faster but the reaction would not happen immediately. It would take a long time for the effect to start kicking in but it will definitely speed up the process of CO2 being released into our atmosphere.
Explanation:
If CO₂ is being produced in the solution at a faster rate than H₂CO₃, then the rate of the forward reaction is faster.
What is the rate of a reaction?Rate of any reaction tells about the duration of the completion of reaction to produce products.
Given chemical reaction is written as:
H₂CO₃ ⇄ CO₂ + H₂O
In the question it is given that CO₂ is produced at the faster rate, and it is the product of the forward reaction. So, we conclude that rate of forward reaction is faster.
Hence, the rate of forward reaction is faster.
To know more about rate of a reaction, visit the below link:
https://brainly.com/question/7694417
What is the specific heat capacity of silver metal if 110.00 g of the metal
absorbs 396 J of heat and the temperature rises 15.0°C ?
Answer:
"0.24 J/g.k" is the appropriate solution.
Explanation:
Mass of substance,
m = 110.00 g
Heat,
q = 396 J
Change in temperature,
ΔT = 15.0°C
Now,
The specific heat will be:
⇒ [tex]q=ms \Delta T[/tex]
On putting the given values, we get
⇒ [tex]396=110.00\times s\times 15.0[/tex]
⇒ [tex]396=s\times 1650[/tex]
⇒ [tex]s=\frac{396}{1650}[/tex]
⇒ [tex]=0.24 \ J/g.k[/tex]
match these items. three-dimensional bonding, hardest natural substance, used as lubricant, nonconductor, weak planar bonds, carbon black or soot
Answer:
1. three-dimensional bonding
Diamond
2. Hardest natural substance
diamond
3. Used as lubricant
Graphite
4. nonconductor
Diamond
5. Weak, planar bonds
Graphite
6.Carbon black or soot
Amorphous
Explanation;
sorry im late, hopefully this can help somebody :)
Imagine you had HCl with a concentration of exactly 0.10 mol/dm3. If 0.023 dm3 of a sodium hydroxide solution, NaOH (aq), could exactly neutralize 0.040 dm3 of the HCl solution, what is the concentration of the NaOH (aq)
Answer:
Explanation:
Step 1: Calculate the amount of sodium hydroxide in moles
Volume of sodium hydroxide solution = 25.0 ÷ 1,000 = 0.0250 dm3
Rearrange:
Concentration in mol/dm3 =
Amount of solutein mol = concentration in mol/dm3 × volume in dm3
Amount of sodium hydroxide = 0.100 × 0.0250
= 0.00250 mol
Step 2: Find the amount of hydrochloric acid in moles
The balanced equation is: NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)
So the mole ratio NaOH:HCl is 1:1
Therefore 0.00250 mol of NaOH reacts with 0.00250 mol of HCl
Step 3: Calculate the concentration of hydrochloric acid in mol/dm3
Volume of hydrochloric acid = 20.00 ÷ 1000 = 0.0200 dm3
Concentration in mol/dm3 =
Concentration in mol/dm3 =
= 0.125 mol/dm3
Step 4: Calculate the concentration of hydrochloric acid in g/dm3
Relative formula mass of HCl = 1 + 35.5 = 36.5
Mass = relative formula mass × amount
Mass of HCl = 36.5 × 0.125
= 4.56 g
So concentration = 4.56 g/dm3
The ionization energies required to remove successive electrons from one mole of calcium atoms are 590 kJ/mol, 1145 kJ/mol, 4912 kJ/mol, and 6474 kJ/mol. The most common ion of calcium is probably
Answer:
Ca^2+
Explanation:
As we know, more energy is required to remove an electron from a positively charged ion than is required to remove an electron from a neutral atom. Hence, the second ionization energy of calcium is greater than its first ionization energy.
However, the third and fourth ionization energies of calcium are much higher than the second ionization energy because they involve removal of electrons from an inner filed shell. This process requires a lot of energy and is often not feasible.
Hence, the most common ion of calcium must be Ca^2+ where only two electrons are removed from calcium.
3. A PS6 plugged into a 120 V outlet uses 3 Amps. What is the Resistance rating of
the power cord?
voltage: V=
current: 1 =
resistance: R=
V=IxR
1=VR R
Underline/Bold Which Equation we are going to use:
= V
Plug in the numbers from above and solve for our answer:
Answer:
R = 40 ohms
Explanation:
Given that,
The voltage of outlet, V = 120 V
Current flowing through the device, I = 3 A
We need to find the Resistance rating of the power cord. Let the resistance is R. We know that,
Ohm's law, V = IR
Put all the values,
[tex]R=\dfrac{V}{I}\\\\R=\dfrac{120}{3}\\\\R=40\ \Omega[/tex]
So, the resistance rating of the power cord is equal to 40 ohms.
Gather data: experiment with a variety of initial concentrations of no2 and n2o4. for each set of initial concentrations, use the gizmo to determine the equilibrium concentrations of each substance. in the last column, find kc for that trial. run three trials for each set of initial conditions.
Solution :
[tex]$H_2 +I_2\rightleftharpoons 2HI$[/tex]
Initial concentration Equilibrium concentration [tex]$K_c=\frac{[HI]^2}{[H_2][I_2]}$[/tex]
(mol/L) (mol/L)
[tex]$[H_2]$[/tex] [tex]$[I_2]$[/tex] [tex]$[HI]$[/tex] [tex]$[H_2]$[/tex] [tex]$[I_2]$[/tex] [tex]$[HI]$[/tex]
[tex]$2.4 \times 10^{-2}$[/tex] [tex]$1.38 \times 10^{-2}$[/tex] 0 [tex]$1.14 \times10^{-2}$[/tex] [tex]$0.12 \times 10^{-2}$[/tex] [tex]$2.52 \times 10^{-2}$[/tex] 46.42
[tex]$2.4 \times 10^{-2}$[/tex] [tex]$1.68 \times 10^{-2}$[/tex] 0 [tex]$0.92 \times10^{-2}$[/tex] [tex]$0.20 \times 10^{-2}$[/tex] [tex]$2.96 \times 10^{-2}$[/tex] 47.61
[tex]$2.4 \times 10^{-2}$[/tex] [tex]$1.98 \times 10^{-2}$[/tex] 0 [tex]$0.77 \times10^{-2}$[/tex] [tex]$0.31 \times 10^{-2}$[/tex] [tex]$3.34 \times 10^{-2}$[/tex] 46.73
[tex]$2.4 \times 10^{-2}$[/tex] [tex]$1.76 \times 10^{-2}$[/tex] 0 [tex]$0.92 \times10^{-2}$[/tex] [tex]$0.22 \times 10^{-2}$[/tex] [tex]$3.08 \times 10^{-2}$[/tex] 46.86
[tex]$0$[/tex] [tex]$0$[/tex] [tex]$3.04 \times 10^{-2}$[/tex] [tex]$0.345 \times10^{-2}$[/tex] [tex]$0.345 \times 10^{-2}$[/tex] [tex]$2.35 \times 10^{-2}$[/tex] 46.39
[tex]$0$[/tex] [tex]$0$[/tex] [tex]$7.58 \times 10^{-2}$[/tex] [tex]$0.86 \times10^{-2}$[/tex] [tex]$0.86 \times 10^{-2}$[/tex] [tex]$5.86 \times 10^{-2}$[/tex] 46.42
Average [tex]$K_c=46.738$[/tex]
HELP ASAPPP!!! ON EXAM!
The arrangement of electrons within an atom is called it's...
a
Electron Flow
b
Electron Configuration
c
Atomic Number
d
Ionization Energy
Answer:
The arrangement of electrons within an atom is called electron configuration
If I help you, will you help other people?
Actually "this is the worst question i've ever seen use the internet bud" why don't you do that.
Question 6
6.7 pts
A solution has a very high electrical conductivity, turns litmus paper red and has a pH of 2.0. This is most likely
a(n)
Base/Strong Electrolyte
Acid/Weak Electrolyte
Acid/Strong Electrolyte
Base/Weak Electrolyte
Next
« Previous
Answer:
Acid/String Electrolyte
Explanation:
Litmus paper turning red means it is an acidic solution. A pH of more than 7 is Base while pH of less than 7 is an acid. Since the pH is 2, less than 7, it s is an acid. Since it has a high electrical conductivity, it must be a strong Electrolyte.
explain how soil can affect the composition of the solution that move through it
Answer: Soils are formed through the interaction of five major factors: time, climate, parent material, topography and relief, and organisms.
Soil structure affects plant growth in many, often surprising, ways. The most obvious effects are on root growth, which is strongly inhibited by hard soil, and which in turn influences the ability of the root system to extract adequate water and nutrients from the soil.
Explanation:
https://www.publish.csiro.au/sr/pdf/SR9910717
This is where I gather some info.
what are the best topics to write a project work on EVS and Chemistry
Answer:
It is better to do chemistry
Explanation:
So that you will learn more of chemicals
50 POINTS PLEASE HELP!
A gas diffuses 1/7 times faster than hydrogen gas (H2).
What is the molar mass of the gas?
100.10 g/mol
98.78 g/mol
86.68 g/mol
79.98 g/mol
Answer: The molar mass of the gas is 9.878 g/mol.
Explanation:
According to Graham's law, the rate of diffusion is inversely proportional to square root of molar mass of gas.
[tex]Rate = \frac{1}{\sqrt{M}}[/tex]
where,
M = molar mass of gas
As given gas diffuses 1/7 times faster than hydrogen gas. So, its molar mass is calculated as follows.
[tex]\frac{R_{1}}{R_{2}} = \sqrt{\frac{M_{2}}{M_{1}}}\\[/tex]
where,
[tex]M_{1}[/tex] = molar mass of hydrogen gas
[tex]M_{2}[/tex] = molar mass of another given gas
[tex]R_{1}[/tex] = rate of diffusion of hydrogen
[tex]R_{2}[/tex] = rate of diffusion of another given gas = [tex]\frac{1}{7}R_{1}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{R_{1}}{R_{2}} = \sqrt{\frac{M_{2}}{M_{1}}}\\\frac{R_{1}}{\frac{1}{7}R_{1}} = \sqrt{\frac{M_{2}}{2}}\\7 \times 1.414 = M_{2}\\M_{2} = 9.878 g/mol[/tex]
Thus, we can conclude that the molar mass of the gas is 9.878 g/mol.
Answer:
98.78 g/mol
Explanation:
Just took the test
Help me plz plz bbbbb
Answer:
The respiratory system is the network of organs and tissues that help you breathe. basically your airways, lungs, and blood vessels so you quite literally need these to survive I mean your muscles need oxygen to function and your brain needs oxygen to function so without your respiratory system you wouldn't be able to move much and you would quickly pass out and die from the lack of oxygen to your brain there are other body processes that need oxygen as well but these are just two examples.
Explanation:
Answer:
Maybe it’s dark ??????????????
Explanation:
Hm
How many joules of heat is needed when 5 g of water is heated from 25°C to 75°C?
Answer:
1045 J
Explanation:
By using the formula Eh= mass×specific heat capacity × change in tempreture
With it being a known fact that the specific heat capacity of water is 4.16g/j/°c
Calculate the mass of an object that has a density of 3.52g/cm^3 and
a volume of 5000 cm^3. Note that Mass = Volume X Density
Answer:
17.6kg
Explanation:
mass = Volume × Density
mass = 5000cm^3 × 3.52g/cm^3
mass = 17600g = 17.6kg
A student was asked to determine the activity of four unknown metals W,X,Y and, Z.
Answer:
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
The activity of four unknown metals based on their chemical changes is option B.
What is a chemical change?Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.
There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical changes:
1) inorganic changes
2)organic changes
3) biochemical changes
During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical change,here:
https://brainly.com/question/23693316
#SPJ3
Which of the following will conduct electricity?
Question 9 options:
A) Acid solutions only
B) Base solutions only
C) Acid solutions and base solutions
D) Neither acid solutions nor base solutions
Answer:
I think is c
Explanation:
I hope this helps you
Answer:
Acid solutions and base solutions
Explanation:
How many grams of CO2 are produced from 6.7 L of O2 gas at STP?
13 g CO₂
General Formulas and Concepts:Chemistry
Atomic Structure
Reading a Periodic TableMolesSTP (Standard Conditions for Temperature and Pressure) = 22.4 L per mole at 1 atm, 273 KStoichiometry
Using Dimensional AnalysisMath
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to Right Explanation:Step 1: Define
Identify variables
[Given] 6.7 L O₂
[Solve] g O₂
Step 2: Identify Conversions
[STP] 22.4 L = 1 mol
[PT] Molar Mass of O: 16.00 g/mol
[PT] Molar Mass of C: 12.01 g/mol
Molar Mass of CO₂: 12.01 + 2(16.00) = 44.01 g/mol
Step 3: Convert
[DA] Set up: [tex]\displaystyle 6.7 \ L \ O_2(\frac{1 \ mol \ O_2}{22.4 \ L \ O_2})(\frac{44.01 \ g \ O_2}{1 \ mol \ O_2})[/tex][DA] Divide/Multiply [Cancel out units]: [tex]\displaystyle 13.1637 \ g \ O_2[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
13.1637 g CO₂ ≈ 13 g CO₂
A sodium nitrate solution was prepared in the lab to have a concentration of 0.467 M. If 50. mL of a 6.00 M stock solution was used to prepare this sodium nitrate solution, what volume of water was added to the original 50. mL of stock solution? Provide the appropriate units (mL or L) to your response.
the treaty of versailles ended world war i, but some of the terms of the treaty contributed to the beginning of world war ii. which was one of the terms of the treaty? the answer would be "germany was forces to pay reparations to the allied countries.". i hope this .
Explanation:
What kind of reaction shows two reactants combining to form one new product?
What kind of reaction shows two reactants combining to form one new product?
A) a single-replacement reaction
B) a double-replacement reaction
C) a decomposition reaction
D) a synthesis reaction
how do you start a hypothesis in science which includes scientific words and information which is on how much sugar can dissolve in water using the temperature of the solvent which is the water?
Answer: If ... Then... Because...
Explanation: if I water this plant twice a day then it will grow 3 feet because the more water it gets the bigger it grows
define restivity and conductivity?
Answer:
Electrical resistivity is a property of a material that tells you how much it resists the flow of electric current, while conductivity quantifies how easily current flows.
2CO +0, 200, what is the mole ratio of carbon monoxide to carbon
dioxide
A 1.2
B 2.2
C 2:1
D 3:1
Answer:
B. 2.2
Explanation:
If HA, an acid, is 15 percent dissociated in a 2.00 molar solution, what is the Ka for the solution?
A.5.3 × 10-2
B.6.4 × 10-3
C.1.1 × 10-2
D.1.2 × 10-2
Answer:
A. 5.3 X 10^-2
Explanation:
I got 100 on PLATO
what determines the identity of a substance?
proton
neutron
electron
photon
Answer:Typically, the identity of a substance can be described by a: chemical name, for example, benzene; number, for example, EC number 200-753-7, and.
Explanation:chemical composition, for example, >99 % benzene and <1 % toluene. The composition is determined by chemical analysis.
Answer:
proton
Explanation:
thats what my bio teacher just said
The carbon dioxide is released when limestone is heated during the
production of _____?
Carbon dioxide is released when limestone is heated during the production of [tex]\sf\purple{cement}[/tex]. ✔
[tex]\circ \: \: { \underline{ \boxed{ \sf{ \color{green}{Happy\:learning.}}}}}∘[/tex]