Option (4) is correct: There are ten times more craters on the older highlands than the younger maria.
Who are astronomers?
Astronomers are scientists in the field of astronomy, who focus their research on a particular problem or area outside the realm of the Earth. Observe celestial bodies such as stars, planets, moons, comets, and galaxies either by observation (by analyzing data) or by theoretical astronomy. Examples of topics and fields studied by astronomers include planetary science, solar astronomy, the origin and evolution of stars, and the formation of galaxies. A related but different field is physical cosmology, which studies the universe as a whole.
Therefore, Option (4) is correct: There are ten times more craters on the older highlands than the younger maria.
To know more about astronomy, check out:
https://brainly.com/question/10826203
#SPJ4
the role of the mouth in sound the prodution of sound during speech or singing is a complicated process lets concentrate on the mouth a typcal depth for the huamn mouth is about 8 cm although this number can vary. (Check it against your own mouth.) We can model the mouth as an organ pipe that is open at the back of the throat. What are the wavelengths and frequencies of the first four harmonics you can produce if your mouth is (a) open, (b) closed? Use .v=354 m/s
When open mouth the wavelengths and the frequencies of the first four harmonics you can produce are 0.16 m and 2,212.5 Hz, 0.08 m and 4,425 Hz, 0.053 m and 6,637.5 Hz, 0.04 m and 8,850 Hz.
When closed mouth the wavelengths and the frequencies of the first four harmonics you can produce are 0.32 m and 1,106.25 Hz, 0.1067 m and 3,318.75 Hz, 0.064 m and 5,531.25 Hz, 0.0457 m and 7,743.75 Hz.
If we open our mouth it will create a tube that opens at both ends.
The wavelengthFor the first harmonic
[tex]\lambda_1 = \frac{2L}{1}[/tex]For the second harmonic
[tex]\lambda_2 = \frac{2L}{2}[/tex]For the third harmonic
[tex]\lambda_3 = \frac{2L}{3}[/tex]For the fourth harmonic
[tex]\lambda_4 = \frac{2L}{4}[/tex]If we closed our mouth it will create a tube that one end opens and the other end closed.
The wavelengthFor the first harmonic
[tex]\lambda_1 = \frac{4L}{1}[/tex]For the second harmonic
[tex]\lambda_2 = \frac{4L}{3}[/tex]For the third harmonic
[tex]\lambda_3 = \frac{4L}{5}[/tex]For the fourth harmonic
[tex]\lambda_4 = \frac{4L}{7}[/tex]Learn more about frequency in a tube here: https://brainly.com/question/29491212
#SPJ4
suppose identical amounts of heat transfer into different masses of mercury and water, causing identical changes in temperature. what is the ratio of the mass of mercury to water?
Assume that similar quantities of heat are transferred into various masses or mercury and water, resulting in equivalent temperature variations. Mercury's mass is 0.033 times that of water.
What makes Mercury so unique?Of such eight moons of jupiter, Mercury is the smallest and one that is closest to the Sun. Mercury completes three spins of its axis for each of the two circuits it makes around the Sun, so takes around 96 Earth days. This rotation is exclusive to the solar system and is gravitationally locked.
Briefing :According to the statement we have Mass of mercury = M(Hg), and
Mass of Water = M(H₂O)
M(cu) / M(H₂O) , heat transfer and mass are related as we have the formula : Q=mcΔT
according to the formula we have , Q(Hg) = M(Hg) C(Hg)ΔT(Hg)...........(1)
for water , Q(H₂O)= M(H₂O) C(H₂O)ΔT(H₂O)..............................(2)
therefore dividing by specific heat in the temperature = C T from both sides .
we Get : [tex]\frac{ Q(Hg)}{CT} =[/tex][tex]\frac{ M(Hg) C(Hg)ΔT(Hg)}{CT}[/tex] , [tex]\frac{Q(H2O) }{CT} =[/tex] [tex]\frac{C(H2O) Δ TH2O}{CT}[/tex]
∴ Q(Hg)=[tex]\frac{Q(Hg)}{Q(Hg)ΔT(Hg)}[/tex] , Q(H₂O)= [tex]\frac{ Q(H2O)}{C(H2O)ΔTH2O)}[/tex]
by solving we get = Q(Hg)/C(Hg)ΔT(Hg)/Q(H₂O) / C(H₂O)ΔT(H₂O)
= Q(Hg)/C(Hg)ΔT(Hg) × C(H₂O)ΔT(H₂O)/Q(H₂O)
= [tex]\frac{C(H2O)}{C(Hg)}[/tex]= M(Hg)/M(H₂O)
specific heat of water = 4184 J/kg
and specific heat of mercury = 139 J/kg
therefore we get 4184/139 = 0.033 ans or 3:100 in ratio
To know more about Mercury visit :
https://brainly.com/question/594092
#SPJ4
did a large terrestrial planet ever form in the region of the asteroid belt? (a) no, because there was never enough mass there. (b) no, because jupiter prevented one from accreting. (c) yes, but it was shattered by a giant impact.
The large terrestrial planet never formed in the region of the asteroid belt because there was never enough mass there. Thus, option (a) is the answer.
Rocky planetesimals survived in the asteroid belt between Mars and Jupiter because they did not accrete into a planet. Jupiter's gravity, through the influence of orbital resonances, stirred up asteroid orbits and thereby prevented their accretion into a planet.
Jupiter's gravity is so strong, that it makes asteroid orbits within the Kirkwood gaps unstable. It's these gaps that prevented a single planetary body from forming in that region. So, because of Jupiter, asteroids formed into families of debris, rather than a single planetary body.
To know more about Asteroid Belt:
https://brainly.com/question/13155353
#SPJ4
the left end of a long glass rod 9.00 cmcm in diameter, with an index of refraction 1.56, is ground and polished to a convex hemispherical surface with a radius of 4.50 cmcm . an object in the form of an arrow 1.49 mmmm tall, at right angles to the axis of the rod, is located on the axis 23.0 cmcm to the left of the vertex of the convex surface.Find the position and height of the image of the arrow formed by paraxial rays incident on the convex surface. Is the image erect or inverted?
S' = 14.77 cm height of image = 0.577 mm is the computed response. It is inverted because magnification is negative.
Where radius (R) is positive because it is facing the same direction as the refracted light, and index of refraction (n1) = 1 for air and index of refraction for glass (n2) = 1.60, object distance from vertex to spherical surface (s) is 24 cm, or 0.24 meters, and image distance from vertex to spherical surface (s') is 4 cm, or 0.04 meters.
Height of object = y = 1.5 mm = 0.0015 m Height of image = y'
For a spherical reflecting surface, the object-image formula is:
According to the magnifying formula:
It is inverted because magnification is negative.
Learn more about refraction here-
https://brainly.com/question/14760207
#SPJ4
according to this graph, the minimum size of an object that could cause a mass extinction is a little less than _____
According to this graph, the minimum size of an object that could cause a mass extinction is a little less than 10 km.
Answer is in the graph, min size of object that could cause a mass exinction is a little less than 10 km.
When a significant portion of biodiversity, such as separate species of bacteria, fungi, plants, mammals, birds, reptiles, amphibians, fish, or invertebrates, goes out during a brief period of geological time, this is referred to as a mass extinction. Impacts from comets and asteroids, extensive volcanism, climate changes,bacteria,abrupt shifts in the topography and ocean currents, or a combination of these elements may be the cause of mass extinction events. At least 75 percent of all species become extinct during major extinctions, which typically last three million years. Some experts think that, if things continue as they are, we may be able to remove that number within a few centuries.
Learn more about mass extinction here:
https://brainly.com/question/10297522
#SPJ4
what is the wavelength of the electromagnetic wave produced by your cell phone, if the frequency of that wave is 900 mhzmhz ? express your answer with the appropriate units.
The wavelength of the electromagnetic wave is 0.33m
The study of electromagnetic radiation is known as electrodynamics, and electromagnetic radiation itself, or EM, is a physical phenomenon connected to the idea of electrodynamics. The properties of superposition apply to electric and magnetic fields as well. A field produced by a specific particle or a time-varying magnetic or electric field, then, contributes to the other fields that are present in the same space due to other causes. In addition, all magnetic and electric field vectors combine together using the vector addition formula because they are vector fields. For instance, in optics, two or more coherent light waves may interact and, through destructive or constructive interference, produce a resultant irradiance that is different from the sum of the component irradiances of the individual light waves.Frequency = 900 x 10⁶Hz
[tex]Frequency=speed/wavelength[/tex]
[tex]Wavelength=speed/frequency[/tex]
=3 x 10⁸/900 x 10⁶
=0.33m
To study about coherent light -
https://brainly.com/question/9964433
#SPJ4
6. A bird drops a feather from the roof of a 13.1 m tall building. The feather is blown
48.6 m west before falling to the ground. What is the resultant displacement of
the balloon?
The resultant displacement of the feather be 50.33 m.
What is displacement?
The term "displacement" refers to a shift in an object's position. It is a vector quantity with a magnitude and direction. The symbol for it is an arrow pointing from the initial location to the ending place.
For instance, if an object shifts from location A to position B, its position changes. Displacement is the term used to describe this shift in an object's position.
Given that: A bird drops a feather from the roof of a 13.1 m tall building. The feather is blown 48.6 m west before falling to the ground.
So, the resultant displacement of the feather be = √(13.1² + 48.6²) m = 50.33 m.
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ1
a child sprays her sister with water from a garden hose. the water is supplied to the hose at a rate of 0.123 l/s, and the diameter of the nozzle is 5.43 mm. at what speed ???? does the water exit the nozzle?
The water exists the nozzle at the speed of 5.315 m/s when rate of flow and diameter is given.
What is the water flow rate?Your water flow rate is the measurement of how many gallons of water could potentially come out of your kitchen faucet or bathtub per minute.
Given, Rate of flow= 0.123 l/s = 0.000123 m^3/s
and d= 5.43 mm= 0.00543m
r= 2.715 * 10^-3
Flow rate= water velocity * area of the nozzle
Area of nozzle = π* r²
= 3.14 *( 2.715 * 10^-3)²
= 2.314 * 10^-5
0.000123 = V * 2.314 * 10^-5
Speed at which the water exits= 5.315 m/s
To know more about rate of flow, refer
https://brainly.com/question/22716530
#SPJ1
a .50 kilogram puck is sliding on a horizontal shuffle board court is slowed to rest by a frictional force of 1.2 newtons what is the coeffivent of kinetic friction betweej the puck and the surface of the shuffle board court
The puck's kinetic friction coefficient only with shuffleboard court's surface is 0.24.
How does kinetic friction work?It is known as a force that exists between moving surfaces as kinetic friction. A force that operates in the opposing direction to the motion of a body on the surface is felt. The percentage of kinetic friction of the two materials will determine the size of the force.
Briefing:
Given ,The mass of puck is, m = 0.50 kg.
The magnitude of frictional force is, f = 1.2 N.
The force which tends to oppose the motion between an object and the surface is known as frictional force. And its value is,
F= μ × mg
here, is the coefficient of kinetic friction between the puck and the surface of the shuffleboard court.
Solving as ,
1.2 = u × 0.50 × 9.8
μ = [tex]\frac{1.2}{0.50 . 9.8}[/tex]
μ = 0.24
Thus, we can conclude that the coefficient of kinetic friction between the puck and the surface of the shuffleboard court is 0.24.
To know more about kinetic friction visit:
https://brainly.com/question/23295976
#SPJ4
what magnitude of current is required to produce 1.4 kg of sodium metal in one hour? express your answer in amperes to two significant figures.
Magnitude of current required is 1630 amp.
Current can be defined as the rate of flow of charge.
Since Faraday represents the magnitude of electric charge per mole of the electron
Mass can be given as:
mass = molar mass * faradays used/faradays needed
1 faraday = 1C/96500
Na + (aq) + e- -> Na(s) : one electron is transferred so faradays needed to produce 23.0g Na is 1
1.4kg*1000 = 1400g
1400g = 23.0g/mol * Fu/1f
Fu (faradays used) = Coulombs/96500 (faraday constant)
Fu = 60.9f=Q/96500
Q = 96500*60.9= 5.88*10^6
As we know that, Q = I*t
5.88*106= I*3600s(1h=60min=3600s)
I=1630amps
The current required to produce 1.4 kg of sodium metal in one hour is 1630 amperes.
To know more about current,
https://brainly.com/question/14981710
#SPJ4
a wheel 0.800 m in diameter rotates with an angular acceleration of 4.40 rad/s2. if the wheel’s initial angular velocity is 2.10 rad/s, what is its angular velocity after 11.4 s?
The angular velocity after 11.4s is 52.56 rad/s
[tex]w_{f}=w_{0}+at[/tex]
Given:[tex]w_{0}=2.10,a=4.40,t=11.4[/tex]
[tex]w_{f}=2.10+4.40*11.4\\w_{f}=52.56[/tex]
What is angular velocity?
Angular velocity is a vector quantity and is described as the rate of change of angular displacement which specifies the angular speed or rotational speed of an object and the axis about which the object is rotating.
What are angular velocity and acceleration?
Angular velocity is the rate of change of angular displacement and angular acceleration is the rate of change of angular velocity.
Are angular velocity and momentum the same?
While linear momentum is P = MV, where M is mass and V is velocity, angular momentum L = Iw, where I is rotational inertia and w (we use w instead of small Omega, the conventional symbol) is angular velocity. Angular velocity is just the angle the mass rotates in an interval of time. w has the units of radians/second.
Thus, the angular velocity is 52.56 rad/s
To know more about angular velocity:
https://brainly.com/question/20432894
#SPJ4
True or False. When light passes from one medium to another the speed stays constat
When light passes from one medium to another the speed of the light changes. Therefore, the given statement is false.
What is refraction?Refraction takes place when the light travels from one medium to another medium it changes its speed. Refraction can be defined as the redirection of light as it passes from one medium to another.
The redirection of the light ray causes by the change in the speed of the wave or by a change in the medium. Refraction of light can be observed for sound waves and water also experiences refraction.
Refraction of light obeys Snell's law, according to which the ratio of the sines of the angle of incidence and angle of refraction must be equal to the ratio of the refractive indices of the two media.
[tex]{\displaystyle {\frac{Sin \theta_1}{Sin \theta_2} =\frac{n_2}{n_1}[/tex]
Learn more about refraction, here:
brainly.com/question/14760207
#SPJ1
A soccer ball is kicked horizontally. what is the average speed if its displacement is 21 m after 4 sec
When a soccer ball is kicked horizontally, then the average speed is calculated to be 5.25 m/s.
What is displacement?The term displacement means that an object has moved, or has been displaced. Change in position of an object is displacement. Standard unit of displacement in the International System of Units is meter. Displacement is usually measured along a straight line
Distance is a scalar quantity that refers to how much ground an object has covered during motion whereas displacement is a vector quantity that means how far out of place an object is.
Given displacement is 21m
and time = 4sec
Therefore average speed= 21/4
= 5.25 m/s
To know more about displacement, refer
https://brainly.com/question/14422259
#SPJ4
According to the one-year calendar model based on the Big Bang theory, life on the planet began in __________.
December
August
January
September
According to the one-year calendar model based on the Big Bang theory, life on the planet began in August.
About Big Bang TheoryThe Big Bang theory is the most recent conjecture for the creation of the universe. The big explosion that occurred 13.7 billion years ago is believed to be the beginning of the journey of the entire universe.
The big bang theory describes the creation of the universe as an expansion of matter which then exploded like a giant balloon that is constantly being filled with air. The remnants of these explosions then each became the seeds for the formation of galaxies, solar systems, and the various objects that fill them.
Revealed, Dark Energy in the Universe in Cosmology
Cosmologists and physicists call the universe currently expanding as a result of the Big Bang explosion. Even the speed of its expansion is believed to continue to increase.
Scientists have also found predicted thermal signatures from the Big Bang, the cosmic microwave radiation that enveloped the universe. In the thermal traces there are no objects older than 13.7 billion years, indicating that the universe was born around that time (the time of the Big Bang phenomenon).
The traditional Big Bang theory holds that the universe began from a singularity, or point of infinite density and temperature whose properties are difficult for the human mind to comprehend.
But the theory does not accurately describe anything obvious, because the singularity idea is based on Einstein's general theory of relativity.
Learn more about big bang theory at https://brainly.com/question/17209127.
#SPJ4
An arrow in a bow has 100 j of potential energy. Assuming no loss of heat (no friction), how much kinetic energy will it have after it has been shot?.
We can conclude that the kinetic energy of the arrow after it is being shot is 70 J.
What is kinetic energy?
The energy an item has as a result of motion is known as kinetic energy in physics. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
Given data:
The magnitude of potential energy is, U = 70 J.
Since, it is given that there is no net loss of energy, which definitely in accordance with the conservation of energy. As per the law of conservation of energy, "The total energy of the system remain conserved. The energy can change it's form or can transfer form from one system to another".
So, the entire potential energy of the arrow will get converted into the kinetic energy. That is,
U = KE
KE = 70 J
Thus, we can conclude that the kinetic energy of the arrow after it is being shot is 70 J.
Learn more about the conservation of energy here:
brainly.com/question/15707891
#SPJ4
A friend asks you how much pressure is in your car tires. You know that the tire manufacturer recommends 30 psi, but it’s been a while since you’ve checked. You can’t find a tire gauge in the car, but you just finished taking physics and so you tell your friend, "I don’t know, but I can figure it out." From the owner’s manual you find that the car’s mass is 1700 kg . It It seems reasonable to assume that each tire supports one-fourth of the weight. Using a ruler, you find that the tires are 16 cm wide and the flattened bottom segment of the tire is 15 cm long. Your observation of the tire tread pattern suggests that two-thirds of this segment is in actual contact with the road.
What answer—in psi—will you give your friend?
To calculate the pressure in the car tires, we can use the equation $P = \frac{F}{A}$, where $P$ is the pressure, $F$ is the force acting on the area, and $A$ is the area over which the force is applied. In this case, the force acting on the tire is the weight of the car, and the area is the portion of the tire that is in contact with the road.
First, we need to calculate the weight of the car. The weight of the car is given by the equation $W = mg$, where $m$ is the mass of the car and $g$ is the acceleration due to gravity. We are given that the mass of the car is 1700 kg, so the weight is $W = 1700 \text{ kg} \times 9.8 \text{ m/s}^2 = 16786 \text{ N}$.
Next, we need to calculate the force acting on each tire. Since the weight of the car is distributed evenly among the four tires, each tire supports one-fourth of the total weight, or $F = \frac{1}{4} \times 16786 \text{ N} = 4196.5 \text{ N}$.
Now we need to calculate the area of the tire that is in contact with the road. The width of the tire is 16 cm, and we are given that two-thirds of the flattened bottom segment is in contact with the road.
This means that the length of the segment in contact with the road is $\frac{2}{3} \times 15 \text{ cm} = 10 \text{ cm}$. The area of the tire in contact with the road is therefore $A = 16 \text{ cm} \times 10 \text{ cm} = 160 \text{ cm}^2$.
Finally, we can use the equation $P = \frac{F}{A}$ to calculate the pressure in the tires. Plugging in the values for the force and the area, we get
$$P = \frac{F}{A} = \frac{4196.5 \text{ N}}{160 \text{ cm}^2} = 26.2 \text{ Pa}$$
Since 1 psi is equivalent to 6894.757 Pa, the pressure in the tires is approximately
Learn more about pressure in the tires:
https://brainly.com/question/29404730
#SPJ4
what is the classification of bodies like pluto and eris, which are large enough to be round and have orbits beyond neptune? why are they not considered to be planets?
Given their position, Pluto , Eris are sometimes known as trans-Neptunian objects and dwarf planets (TNOs).
A dwarf planet outside of Neptune's orbit is referred to as a plutoid. As a result of their small size and extremely frigid surface temperatures, Plutoids are also sometimes referred to as "ice dwarfs." One of our solar system's largest dwarf planets is Eris. Despite being three times farther from the Sun, it is roughly the same size as Pluto.
Pluto was downgraded to a dwarf planet by the International Astronomical Union (IAU) because it did not meet the three requirements for a full-sized planet. In essence, Pluto satisfies all the requirements save for the fact that it "has not cleared its neighboring region of other objects."
For more information on dwarf planets
https://brainly.com/question/2274077
#SPJ4
in comparing two unequal forces on a rigid body, is it possible to have the larger force produce less torque than the smaller force?
Yes, it is feasible for the larger force to induce less torque than smaller force when two unequal forces are applied to a rigid body.
What exactly is contact force?Objects making contact each other exert a force on one another known as contact force. The region of direct contact of two objects is where the contact force acts. This force may be brief in the guise of an impulse or it may be continuous as both a continuous force. Newton's Law covers contact force.
Briefing:Torque = rFsin(θ)
It is feasible for a larger force to generate less torque than a smaller force if it acts at a closer distance than that of the smaller force.
To know more about Force visit:
https://brainly.com/question/14110395
#SPJ4
study smarter the plutonium isotope 239pu has a half-life of 24,000 years and decays by the emission of a 5.2 mev alpha particle. plutonium is not especially dangerous if handled because the activity is low and the alpha radiation doesn't penetrate the skin. however, there are serious health concerns if even the tiniest speck of plutonium is inhaled and lodges deep in the lungs. this could happen following any kind of fire or explosion that disperses plutonium as dust.
Therefore, the number of ²³⁹Pu atoms in 1.0 mm diameter particle is 2.6*10⁷
The half-life of the is ²³⁹Pu=2400 yrs
The radius of soot particles is r =1*10⁻⁶m/0=0.5*10⁻⁶m
The density of Plutonium is ρ=19800kg/m³
The number of ²³⁹Pu atoms in a diameter particle is
N=(m/Ma)Na
=ρ4πr³Na/3Ma
Substitute the given values to get number of atoms in particle
N=19.8*4π*(0.5*10⁻⁶)³*6.02*10²³/3*239*10⁻³
=2.6*10⁷
Learn more about atoms here:
https://brainly.com/question/19937820
#SPJ4
a student runs an experiment in which a block of known mass is moving across a horizontal table in an xy-coordinatexy-coordinate plane. as the block reaches the origin of the coordinate system, the block explodes into two pieces of masses m1m1 and m2m2. during the experiment, the velocity of the block 1.01.0 second before the explosion and the velocity of the two pieces 1.01.0 second after the explosion are measured using a motion sensor. conservation of momentum is applied using the masses of the two pieces. however, when the velocity of the piece of mass m2m2 is calculated, the measured value is 10% less than the calculated value. which of the following statements best explains the difference in the calculated and measured velocity?
Question is incomplete the complete question is:
A student runs an experiment in which a block of known mass is moving across a horizontal table in an xy-coordinate plane. As the block reaches the origin of the coordinate system, the block explodes into two pieces of masses m1 and m2. During the experiment, the velocity of the block 1.0 second before the explosion and the velocity of the two pieces 1.0 second after the explosion are measured using a motion sensor. Conservation of momentum is applied using the masses of the two pieces. However, when the velocity of the piece of mass m2 is calculated, the measured value is 10% less than the calculated value. Which of the following statements best explains the difference in the calculated and measured velocity?
A) As the block is moving across the table, friction will affect the block’s motion and thus could account for the difference.
B) It is possible that a small amount of the original block was lost during the explosion.
C) When the student did the calculation, the student assumed that the explosion occurred just as the block reached the origin. The difference in velocity could be due to the explosion occurring either just before or just after the origin.
D) The explosion created a force that affected the experiment.
E) Conservation of momentum is not the correct equation to apply to the explosion, since the two pieces apply forces to each other.
The correct explanation will be as the block is moving across the table, friction will affect the block’s motion and thus could account for the difference.
What is friction?
Moving things lose energy and slow down due to the friction force that resists their motion. A fluid, like air or water, exerts a frictional force on moving objects when they travel through it. A fluid's frictional force is referred to as a drag force.
Effect of friction on motion?
An opposing force to the relative motion of two objects is friction. You will be researching kinetic friction for this assignment (also called sliding friction). Kinetic friction is the process by which some of the kinetic energy of motion between two objects is transformed into heat. The same thing happens when two objects are sliding past one another-for example, when you push a box across the floor.
To know more about Friction visit:
https://brainly.com/question/28356847
#SPJ4
a skydiver leaps from a plane and accelerates toward the surface of the earth. earth’s acceleration toward the skydiver is:
Skydiver's acceleration is substantially greater than Earth's acceleration in its direction.
What is acceleration?
The rate at which velocity, measured in terms of speed and direction, changes over time is known as acceleration. Anything is said to have been accelerated when it goes faster or slower in a straight line.
You fall, your descent to the ground quickening. Until the drag from her falling speed due to wind resistance equals the acceleration induced by gravity, this acceleration will continue. Because air resistance, sometimes referred to as drag force, is typically far lower than the normal force of a body, he should continue to accelerate downward. When these forces are balanced, she will attain "terminal velocity," at which point she will cease gaining speed.
He will continue to descend until he opens his chute at the same pace, although the acceleration he experiences at first is due to gravity.
To know more about acceleration use link below:
https://brainly.com/question/16710160
#SPJ4
52 Points HELP
An arrow leaves a bow at an anitial velocity of 47.74m/s. 0.5 seconds after leaving the bow. When the arrow reaches the target its final velocity is 68.58m/s, 5 seconds later. what is the acceleration of the arrow
27.5 m/s. If the average force exerted on the arrow by the bow was increased 3 times and the arrow was accelerated over the same distance
as long as an object is not gaining or losing mass, a net force on the object will cause a change in as long as an object is not gaining or losing mass, a net force on the object will cause a change in velocity. weight. speed. acceleration. direction.
The net force would cause the velocity of the body to change and it would accelerate.
What is the net force?We know that the force that is acting on a body is a vector quantity. If the force is a vector quantity, the implication of this is that the force would have both a magnitude and direction.
According to the Newton first law of motion, if an object is acted upon by an unbalanced force, the result of this is that the velocity of the object would change and the object would accelerate.
Learn more about net force:https://brainly.com/question/18109210
#SPJ1
dirk pushes on a packing box with a horizontal force of 75.0 n as he slides it along the floor. the average friction force acting on the box is 5.0 n. how much total work is done on the box in moving it 2.50 m along the floor?
Total work done to be done on the box in moving it 2.50 m along the floor is 175 j.
Friction force is an opposing force of motion. It comes into play when an object moves over the surface of another object.
We can find the friction force using formula,
[tex]F_{friction[/tex] = µ • [tex]F_{normal[/tex]
Where,
[tex]F_{friction[/tex] = friction force
µ = coefficient of friction
[tex]F_{norm[/tex] = normal force.
In question given is
Horizontal force(F) = 75 N
Average friction force (f) = 5.0 N
displacement = 2.50 m
[tex]F_{net[/tex] = F-f
= 75- 5 N = 70 N
Work done by the force is
W = [tex]F_{net[/tex] × S
= 70 × 2.50 j
= 175 j
To know more about work here
brainly.com/question/21724760
#SPJ4
two wires have the same length, but the second has twice the diameter of the first. find the resistance of the second wire if the resistance of the first is 4ω.
2ω is the resistance of the second wire if the resistance of the first is 4ω if two wires have the same length, but the second has twice the diameter of the first.
R= 4ω.
R = ρl/A
2d=r
R2=2ω
Resistance is the capacity of a conductor to obstruct the passage of an electric current through it. It is controlled by the interaction of the applied voltage and the electric current passing through it.
Conductors have very little resistance, whereas insulators have a significant amount of resistance. The resistance increases as the current flow decreases. Resistance is influenced by the properties and dimensions of the material (area of cross section)
To know more about resistance visit : brainly.com/question/14547003
#SPJ4
suppose you found a star with the same mass as the sun moving back and forth within a period of 16 months. a) what could you conclude? b) explain the reasons for your conclusion scientifically.
It has a planet orbiting at a distance larger than 1 AU when you discover a star that rotates back and forth every 16 months and has the same mass as the sun.
How can a planet's orbit move inward due to a gravitational collision?How can a planet's orbit move inward due to a gravitational collision? Another object receives both energy and angular momentum from it.
Which of the following is true regarding the transit method of finding exoplanets?There are two fundamental obstacles to directly finding exoplanets. One is that as we go farther away from the earth, the angular size of planets decreases and is no longer able to be resolved in a picture.
To know more about gravitational collision visit:-
https://brainly.com/question/5795500
#SPJ4
Question 8 of 25
**
force of friction and air resistance
normal contact force from the road
driving force from the engine
weight of the car
Hide score
The diagram below shows the different forces acting on a car. Which label below the diagram goes
with arrow A?
off
Reduce contrast
D
7✔ 100%
74%
1007
NICE
Answer:
Explanation:
The diagram shows four forces acting on a plane in flight. direction of flight. (b) (i). Which arrow represents air resistance?
the acceleration due to gravity on the surface of the moon is about 1/6 that on the surface of earth. an astronaut weighs 600 n on earth. the astronauts mass on the moon is most nearly:
Mass of the astronaut on the moon is 61.22 because the acceleration due to gravity on the surface of the moon is about 1/6 that on the surface of earth.
Gravitational acceleration is the acceleration gained by an object due to the force of gravity.
Its SI unit is m/s².It has both magnitude and direction, so it is a vector quantity. Gravitational acceleration is represented by g. The standard value of g on the earth's surface at sea level is 9.8 m/s².Weight of the astronaut on the Earth = w = 600 N
Mass of the astronaut on the Earth = w/g
Mass m = 600/9.8
m = 61.22 kg
Mass of the astronaut will remain same on the Moon but the weight will change due to the change in the acceleration due to gravity on the surface of the moon.
Acceleration due to gravity on the surface of the moon is about 1/6 that on the surface of earth i.e. g' = g/ 6
g' = 9.81/6
g' = 1.63
Weight of the Astronaut on the surface of the moon = m * g'
W' = 100.094 N
Mass will be 61.22 kg and the weight will be 100.94 N on the surface of the moon.
To know more about acceleration due to gravity,
https://brainly.com/question/28084833
#SPJ4
If the weight of an object of mass "m" is "mg," then the weight of an object of mass "2m" is.
This leads us to the conclusion that if an object of mass "m" weighs "mg," then an object of mass "2m" weighs "2mg."
Which is mass?Mass is a crucial aspect of all matter and a measurement on inertia in physics. What a body of matter is fundamentally, is the resistance it offers to something like a change in its speed and location brought on by the application of a force. The amount of mass a body has no bearing on how much of a change a force applies.
what do a mass and weight mean?Mass is a unit used to describe the amount of matter who makes up an object. Weight, a measure of force, is used to calculate the gravitational pull an object experiences. In contrast to mass, weight is not location-dependent.
To knwo more about mass visit:
https://brainly.com/question/19694949
#SPJ4
if an astronaut knocks a wrench off the outside of the space shuttle (while in space) while she is doing a repair job, the wrench will continue moving in the same direction. which of newton's laws of motion will the wrench demonstrate?
The Newton's first law is demonstrated over here.
If the wrench is thrown then that wrench will keep on moving in the space.
As we all no space has no gravity and since there is no gravity, hence, no force is applied on that body.
The wrench will move freely in the space and will continue to move in same direction until there is some external force is applied to stop or change its direction.
This shows that over here the Newton's first law is applied.
The Newton's first law states that the body will continue to be in the same state or motion and will not change until the external force is applied on it.
This Newton's first law is also known as law of inertia.
Therefore, the wrench will continue to move in the same direction under the influence of Newton's first law.
To know more about Newton's first law, refer: brainly.com/question/974124
#SPJ4