What key features should be present in the ir spectrum of your product if you successfully made the desired bromohydrin? what key features should be absent from the ir spectrum if the starting material was completely reacted?.

Answers

Answer 1

Stretching frequency will be increased for bonds with higher bond strengths. Higher atomic mass atoms in the bond will result in lower stretching frequency values in the IR spectrum.

The IR spectrum is what?

A popular absorption technique in both qualitative and quantitative assessments is infrared (IR) spectroscopy. Electromagnetic radiation that can change the vibrational and rotational states of covalent bonds in organic molecules is found in the infrared portion of the spectrum.

How is an infrared spectrum created?

By exposing a sample to infrared radiation at a variety of frequencies and detecting the absorptions caused by each type of bond in the complex, an infrared spectrometer analyzes a substance. This generates a spectrum, which is typically a "plot" of transmittance percentage versus wavenumber.

Learn more about IR spectrum here:

https://brainly.com/question/15452269

#SPJ4


Related Questions

would the substance below (h2o2 with geometry given) be soluble in water (a polar solvent) or in benzene (a nonpolar solvent)?

Answers

Since H2O2 is an acid, its molecules react with water molecules to produce H3O+ and Br ions, which give the solution conductivity.

What differentiates polar from nonpolar solvents?

n contrast to nonpolar solvents, which dissolve nonpolar substances, polar solvents dissolve in polar compounds. The major difference between polar and nonpolar solvents is this. Additionally, polar liquids contain molecules with polar bonds, whereas nonpolar fluids contain molecules with comparable electronegativity values.

A nonpolar or polar solvent?

Polar solvents contain bonds between atoms with widely differing electronegativities, such as oxygen and hydrogen, and have strong dipole moments (also known as "partial charges"). Bonds between elements with comparable electronegativities, such as carbon and hydrogen, are found in non-polar fluids (think hydrocarbons, such as gasoline)

To know more about non-polar solvent visit:

https://brainly.com/question/29356611

#SPJ4

based on the position of the elements on the periodic table, which hydrogen bond would result in the greatest difference in electronegativity?

Answers

According to the position of the elements in the periodic table, the nitrogen bond contains the greatest difference in the electronegativity.

Electronegativity is defined as the tendency of an atom, which participates in a bond formation to attract the electrons. The nitrogen when bonded with hydrogen, shows a greatest difference in the electronegativity. The electronegativity value of N and H is 3.04 and 2.20 respectively. Hence, their difference is

ΔE=(3.04-2.20)=0.84

For boron and hydrogen, it is

ΔE=(2.20-1.57)=0.63

For phosphorus and hydrogen

ΔE=(2.20-2.19)=0.01

Therefore, according to the position of the elements in the periodic table, the nitrogen bond with hydrogen contains the greatest difference in the electronegativity.

To know more about electronegativity

https://brainly.com/question/17762711

#SPJ4

a. consider the molecule pentane. i. how many carbon atoms does this molecule have? (1 point) ii. what kinds of bonds does it have? (1 point)

Answers

Five carbon atoms make up the chemical pentane, which also contains one type of covalent bond and five carbon atoms.

What is atom and example?

The quantity of protons an atom has makes it distinct from other atoms. Consequently, a particle devoid of proton not an atom. But even a single proton constitutes a atom (of hydrogen). Single particles of the periodic table elements like sodium, plutonium, argon, and chlorine are examples of atoms.

How is an atom formed?

Atoms are made up of a nucleus in the middle that is surrounded by protons, neutrons, and electrons. Uranium is split into smaller atoms during the fission process, creating new atoms. Event such as the Big Bang or Supernova serve as instances .

To know more about atom visit:

brainly.com/question/1566330

#SPJ4

The periodic table is an arrangment of the chemical elements, ordered by atomic number, into families, and by doing so illustrates the periodic properties of the elements. Considering the organization of the periodic table, which element would make a good conductor of electricity? what properties of that element would support this choice?.

Answers

The properties of that element is Copper, Cu.

A solid metal that is ductile and malleable.

Ductility and malleability are properties of metals with specific properties. It is the properties of ductility and formability that aid in the deformation of metals.

Ductility is the ability of a material to stretch without being damaged. A ductile metal can be stretched into a wire. An example is copper wire.Formability is the property of a material to deform under pressure. A malleable metal can be rolled or stamped into sheet. An example is aluminum foil

In metals, the two properties, formability and ductility, do not always correlate. For example, gold is both malleable and malleable, and lead is only malleable.

Therefore, The properties of that element is Copper, Cu.

Learn more about Copper:

https://brainly.com/question/13677872

#SPJ4

Ionic compounds are compounds composed of ions, charged particles that form when an atom (or group of atoms, in the case of polyatomic ions) gains or loses electrons.
A cation is a positively charged ion
An anion is a negatively charged ion.
Covalent or molecular compounds form when elements share electrons in a covalent bond to form molecules. Molecular compounds are electrically neutral.
Ionic compounds are (usually) formed when a metal reacts with a nonmetal (or a polyatomic ion). Covalent compounds are formed when two nonmetals react with each other. Since hydrogen is a nonmetal, binary compounds containing hydrogen are also usually covalent compounds.
Metal + Nonmetal —> ionic compound (usually)
Metal + Polyatomic ion —> ionic compound (usually)
Nonmetal + Nonmetal —> covalent compound (usually)
Hydrogen + Nonmetal —> covalent compound (usually)

Answers

Metal + nonmetal = ionic compound (usually) Typically, nonmetal + nonmetal forms a covalent combination, whereas metal + polyatomic ion forms an ionic compound (usually) Compound formed by hydrogen and a nonmetal (usually).

How is polyatomic distinguished?

Only a few of the periodic table's elements have a second letter that is lowercase after their capital initial. As a result, you will recognize a polyatomic ion if it contains two capital letters together.

O2: Is it polyatomic?

The majority of elements, however, are found in molecules made up of two or more atoms. They are referred to as polyatomic elements. The oxygen family, which includes oxygen, ozone, nitrogen, carbon dioxide, and water, is made up of the most prevalent polyatomic elements.

To know more about Polyatomic visit:

https://brainly.com/question/13704605

#SPJ4

a species that contains a lone (unpaired) electron is referred to as . select the best answer. multiple choice question. a free radical an exception being electron deficient having an extended valence

Answers

A species that contains a lone (unpaired) electron is referred to as a free radical.

The electron is a subatomic particle with a bad standard electric charge. Electrons belong to the primary technology of the lepton particle's own family and are typically thought to be fundamental particles because they have no recognized additives or substructure.

For most realistic purposes, an electron is a structureless particle with an intrinsic angular momentum or spin. simply two numbers — the electron's mass and its electric price — gasoline the equations that describe its behavior. From this 'sensible electron' version, physicists constructed present-day microelectronics.

By using the best values for the wavelength and the scattering by a matter of tough X-rays and ?-rays, the radius of the electron is anticipated as approximately 2 × 10-10 cm.

Learn more about Electron here:-https://brainly.com/question/860094

#SPJ4

for this experiement, the lab instructor had to prepare 650ml of .10 m ca(no3)2. what mass of solid ca(no3)2 was required to prepare this solution

Answers

The solution is 5.0 Molar.

A stable is a state of remembering that keeps its form and density while no longer confined. An example of solids is stable ice, sugar, rock, wood, and so forth.

Before everything glances, strong appears to be a simple word, however, it definitely gives sun shades of which means. A stable pal is reliable. if you deliver a solid overall performance, it became excellent, though no longer quite fantastic. Likewise, in case you achieve a solid win, you win by a large, but now not big, majority.

Solids have specific shapes and exact volumes and are not compressible to any quantity. There are two main classes of solid crystalline solids and amorphous solids. Crystalline solids are those in which the atoms, ions, or molecules that make up the solid exist in an ordinary, nicely-described association.

Learn more about solid here:-https://brainly.com/question/10813056

3SPJ4

one mole of oxygen expands at constant temperature of 310 k from 12 l to 19 l. how much work in joules is done by the expanding gas?

Answers

one mole of oxygen expands at constant temperature of 310 k from 12 l to 19 l. Work in joules is done by the expanding gas is 1180 j.

How to calculate ?

W for isothermal expansion

W=nRT ln (Vf/VI)

W= (1 mole)(8.31J/mole K)(310K) ln(19/12)

W=1180j

What is Ideal Gas Law ?

An ideal gas is one in which there are no intermolecular attraction forces and all collisions between atoms or molecules are entirely elastic. It can be seen as a group of perfectly hard spheres that collide but do not otherwise interact with one another. All of the internal energy in such a gas is kinetic energy, and any variation in internal energy causes a variation in temperature.

What are the characteristics of ideal gas law ?

Three state variables—absolute pressure (P), volume (V), and absolute temperature—can be used to describe an ideal gas (T). Kinetic theory can be used to infer the link between them, which is known as the

                          PV = nRT = NkT

n = number of moles

R = universal gas constant = 8.3145 J/mol K

N = number of molecules

k = Boltzmann constant = 1.38066 x 10-23 J/K = 8.617385 x 10-5 eV/K

k = R/NA

NA = Avogadro's number = 6.0221 x 1023 /mol

Learn more about ideal gas law visit :

https://brainly.com/question/28257995

#SPJ4

explain why there is no minus sign in this equation for heat (unlike the equation for work). (think in terms of microscopic definition of entropy.)

Answers

When heat is absorbed by the solution, the solution's q value is negative. This denotes that the reaction is endothermic, absorbs heat from the solution, and has a positive reaction q.

Yes, it can be negative, in which case one needs a heat sink. Examples of such sinks include melting or evaporation. The source term in an equation for energy conservation could be positive or negative. The temperature of the node will drop if the magnitude of the negative heat source is greater than the heat flow into the system.

Learn more about the positive or negative

https://brainly.com/question/29365427

#SPJ4,

What is required for both the light-dependent and light-independent reactions to proceed?energyco2wateratp and nadph.

Answers

Energy is required for both the light-dependent and light-independent reactions to proceed.

In order to produce ATP and NADPH, the light-dependent reactions of photosynthesis must first collect energy from the sun. Then, these two molecules that store energy are employed in the light-independent reactions. Chlorophyll absorbs solar energy during the light-dependent reactions and transforms it into chemical energy that is then stored. The chemical energy obtained during the light-dependent reactions powers the assembly of sugar molecules from carbon dioxide in the light-independent reactions.

Hence, Water and light energy are needed for the L-D reactions, while ATP, NADPH, and CO2 are needed for the L-IND reactions.

To know more about Photosynthesis.

https://brainly.com/question/1388366

#SPJ4

which phrase is not likely to indicate that a double-displacement reaction has occurred?responsesformation of a precipitateformation of a precipitatechange of a metal ion to a metal elementchange of a metal ion to a metal elementformation of a gasformation of a gasneutralization of acids and bases

Answers

A metal ion or perhaps an ammonium ion takes the place of the acid's H+ ion. A neutralization is the process by which a base and an acid combine to form a salt.

How is acid defined?

Any substance is called an acid if it tastes bad in water solution, colors blue litmus litmus red, reacts with certain metals so release hydrogen, mixes with bases to form salts, and activates chemical reactions (acid catalysis).

Where does acid come from?

In industrial or organic chemistry, acids are utilized as catalysts; for instance, sulfuric acid is often used in extremely high volumes during the alkylation process of creating gasoline. Some acids, including hydrochloric, phosphoric, and sulfuric acid ( h2so4, can also cause condensation and dehydration processes.

To know more about Acid visit:

https://brainly.com/question/14072179

#SPJ4

Nuclear decay occurs according to first-order kinetics. What is the rate constant for radon-220, which has a half-life of 55. 6 seconds?.

Answers

The rate for radon-220, that has a quarter of 55.6 seconds, is 1.246*10⁻² seconds.

What exactly qualifies as nuclear?

Identifying the causes of it. The essential components of a family, frequently its offspring and their parents, are referred to as the "nuclear family" in this context. Nuclear can also indicate "kernel" or, more simply, "something essential," therefore it has a long history of use in figurative language before being associated with "nuclear energy."

Briefing:

Given:

Rate constant for radon = 220

Half-life = 55.6 seconds

(Nt) = (N₀)e⁻λt

At t = [tex]t_{1/2}[/tex] , (Nt) = (N₀)/2

(N₀)/2 = (N₀)e-λ[tex]t_{1/2}[/tex]

[tex]t_{1/2}[/tex] = ln₂/λ

λ is rate constant

55.6 = ln₂/λ

λ = ln₂/55.6

λ ≅ 1.246*10⁻² seconds

To know more about Nuclear visit:

brainly.com/question/3992688

#SPJ4

the procedures instructs a student to measure 7.55 ml of solution 1. the student measures 11.89 ml of solution 1. what is the percent (by volume) of extra liquid measured by the student?

Answers

The procedures tells a student to measure 7.55 ml of solution 1 but the student measures 11.89 ml of solution 1. The percent by volume of extra liquid measure by the student added is 36.50%.

The percent by volume for any solution is calculated as

%(v/v)=(volume of solute/volume of solution)×100

In the given problem, the volume of solution is 11.89 ml and the volume of the solute is

volume of solute=(11.89-7.55)ml

volume of solute=4.34ml

We cannot consider the volume used to measure by procedure because the total volume is increased by extra addition of the solute. Plug all values in the formula

%(v/v)=(4.34 ml/11.89 ml)×100

%(v/v)=0.36501×100

%(v/v)=36.501%

%(v/v)=36.50%

Therefore, the percent of extra volume of a liquid measured by the student is 36.50 ml.

To know more about concentration

https://brainly.com/question/25256765

#SPJ4

The following are the steps involved in transmission at a Cholinergic synapse. 1. Chemically regulated sodium channels on the postsynaptic membrane are activated. 2. Calcium ions enter the synaptic knob. 3. Acetylcholine is degraded by acetylcholinesterase. 4. An action potential depolarizes the synaptic knob at the presynaptic membrane. 5. The synaptic knob reabsorbs choline. 6. Acetylcholine is released from storage vesicles by exocytosis. 7. Acetylcholine binds to receptors on the postsynaptic membrane. 8. Calcium ions are removed from the cytoplasm of the synaptic knob. The correct sequence for these events is: A) 4,2,6,7,1,8,3,5. B) 4,2,6,7,8,5,3,1. C) 2,4,6,7,1,8,3,5. D) 6,4,2,7,1,8,3,5. E) 2,5,4,6,7,1,8,3

Answers

The correct sequence of the events is a)4,2,6,7,1,8,3,5

Cholinergic synapse is a type of chemical synapse that uses acetylcholine (ACh) as its neurotransmitter. This type of synapse is found in the peripheral and central nervous systems and is responsible for the transmission of signals between neurons and other cells. The following steps are involved in cholinergic synapse:

a. Release of Acetylcholine: Neurotransmitter Acetylcholine is released from the presynaptic neuron into the synaptic cleft. This release is regulated by calcium ions and the neurotransmitter is packaged into vesicles which are then transported to the release sites.

b. Binding of ACh to receptors: The released ACh diffuses across the synaptic cleft and binds to postsynaptic receptors on the target cell. This binding triggers a cascade of events in the target cell.

c. Postsynaptic responses: The binding of ACh to postsynaptic receptors triggers a variety of responses in the target cell. These responses include the opening of ion channels, the release of additional neurotransmitters, and the activation of second messenger systems.

d. Inactivation of ACh: After the postsynaptic responses have been carried out, the ACh molecule is inactivated by acetylcholinesterase (AChE). This enzyme breaks down ACh into its component parts, which are then recycled or degraded.

e. Reuptake of ACh: The released ACh is also taken up by the presynaptic neuron for reuse. This process is known as reuptake and helps to regulate the amount of ACh in the synaptic cleft.

By following these steps, the cholinergic synapse is able to transmit signals from one neuron to another. This process is essential for the normal functioning of the nervous system.

Hence the correct option is A)

To know more about neuro-transmitters, click below:

https://brainly.com/question/26387085

#SPJ4

consider the reaction below. h2s so2−4⇌hs− hso−4 which of the above chemical species is the brønsted-lowry base in the forward reaction?

Answers

HS is the Bronsted-Lowry base in the forward reaction.

The Brnsted-Lowry theory is an acid-base reaction theory that was independently proposed in 1923 by Johannes Nicolaus Brnsted and Thomas Martin Lowry.

An acid is a proton (H+) donor in the Brnsted-Lowry definition of acids and bases, and a base is a proton acceptor. A conjugate base is formed when a Brnsted-Lowry acid loses a proton. A conjugate acid is formed when a Brnsted-Lowry base gains a proton.

A Bronsted-Lowry base is a compound that accepts a proton or an H+ ion from another compound. A conjugated acid can donate a proton and reform the base. An acid-base reaction, according to the Bronsted-Lowry theory, involves the exchange of protons or H+ ions between the acid and base.

To learn more about Bronsted-Lowry base, here

https://brainly.com/question/14407412

#SPJ4

according to the collision model, why does increasing the temperature increase the rate of a reaction?

Answers

Increasing the temperature increase the rate of a reaction because it increases the number of collisions.

What is collision model?

According to the collision model, chemical reaction can occur only when reactant molecules, atoms, or ions collide with more than a particular amount of kinetic energy and in the right direction. The collision model explains why most molecular collisions do not result in a chemical reaction.

What is the effect of temperature on collision model?

Temperature influences both the rate of collision and the energy of molecules during collisions, according to collision theory. As the temperature rises, so does the amount of energy in the system, and therefore more molecules will have energy greater than the activation barrier. This accelerates the reaction.

Increasing the temperature increase the rate of a reaction because it increases the number of collisions.

To know more about collision model, check out:

https://brainly.com/question/20628781

#SPJ4

Provide a detailed procedure for the conversion of a tertiary alcohol to an alkyl halide via a SN1 reaction. Compare (and explain) the difference in reaction mechanism when primary alcohols are used instead of a tertiary alcohol. All chemical structures should be hand drawn. You can add images into your responses by clicking on the icon that looks like a mountain landscape. Cut and paste text/figures will not be graded.

Answers

While secondary and tertiary alcohols react using the elementary SN1 mechanism, where no carbocation is created, primary alcohols react using the SN2 mechanism, which entails the production of a carbocation.

What distinguishes a primary alcohol from a tertiary alcohol?

You can tell the type of alcohol by looking at the carbon atoms connected to OH.The alcohol is classified as primary, secondary, or tertiary depending on the number of carbons that are connected to that carbon.

Why does secondary alcohol have a lower reactivity than primary alcohol?

Alkyl groups in tertiary alcohols supply the oxygen of the alcohol with electron density, which lessens the alcohol's acidic intensity.Thus, as the number of alkyl groups attached to a alcohol functional group on carbon grows, the acidity of alcohol decreases.

To know more about SN1 reaction visit:

https://brainly.com/question/10666011

#SPJ4

a sample of tin is heated until it finishes melting. the sample absorbs a total of 1050 j of heat. if the sample requires 460 j of heat to reach its melting point, how much heat is needed to completely melt the sample of tin?

Answers

The heat of fusion is the amount of heat energy needed to turn anything solid into a liquid. There is a formula, Q = mHf. Because matter doesn't affect temperature, the temperature is not a factor.

Will the addition of heat cause the temperature to rise during a phase change?

There is no increase in the kinetic energies of the particles, and hence no rise in temperature, because the energy required for phase shifts is employed to break bonds. Similarly, energy is required to evaporate a liquid to defeat the attraction forces between the liquid's particles.

Does the temperature drop when a phase shift occurs?

The energy that is given during a change in the state of matter is used to alter the binding energies rather than boost the kinetic energy of the molecules. As a result, the temperature doesn't change.

to know more about melting points here:

brainly.com/question/29578567

#SPJ4

except for the transition and inner transition metals, the octet rule applies to all other elements. true false

Answers

False, except for the transition and inner transition metals, the octet rule is not applicable to all other elements.

An element is a substance that can not be damaged down into a simpler layout. They may be distinguished by means of a completely unique atomic range. The elements are organized via their atomic variety in the periodic table, which highlights elements with similar residences.

Carbon is the most important detail of existence. Without this detail, existence, as we are aware of it, might not exist. As you will see, carbon is a vital element in compounds essential for lifestyles.

Kinds of elements :

1.) The elements are categorized as metallic, non-metal, and metalloid.

2.) The intense left aspect factors inside the periodic desk are metals, for example, sodium, calcium, cesium, and many others.

3)  Elements on the right side are usually known as non-metals, carbon, chlorine, oxygen, and many others.

Learn more about Element here:-https://brainly.com/question/20096027

#SPJ4

Why did the volume of Substance 1 change from 3 liters of liquid to just over 0.50 liters after it was boiled and then cooled?
States of mater  interactivity 

Answers

Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Therefore, because of the evaporation of upper surface of liquid, volume decreases.

What is matter?

Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.

Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.

The volume of Substance 1 change from 3 liters of liquid to just over 0.50 liters after it was boiled and then cooled because on heating the molecules on the upper surface of liquid evaporates.

Therefore, because of the evaporation of upper surface of liquid, volume decreases.

To learn more about matter, here:

https://brainly.com/question/4562319

#SPJ1

Nuclear decay occurs according to first-order kinetics. What is the half-life of polonium-218 if a sample decays from 55. 4 g to 31. 7 g in 2. 50 minutes?.

Answers

3.09 minutes is the half-life of polonium-218 if a sample decays from 55. 4 g to 31. 7 g in 2. 50 minutes.

What is half-life?

The half-life of a radioactive sample is the amount of time it takes for half of its atomic nuclei to spontaneously transform into different nuclear species and emit particles and energy, or, more precisely, the amount of time it takes for the radioactive sample to disintegrate at a rate of one disintegration per second.

The rate constant for a first-order reaction and its half-life are connected by the constant t1/2 = 0.693/k.

Therefore, 3.09 minutes is the half-life of polonium-218 if a sample decays from 55. 4 g to 31. 7 g in 2. 50 minutes.

To learn more about half-life

Here: https://brainly.com/question/1160651

#SPJ4

the following alkene is treated with one equivalent of n-bromosuccinimide in dichloromethane in the presence of light to give bromination product(s). draw a line-angle formula for each product formed. you do not have to consider stereochemistry. draw organic products only. draw one structure per sketcher. add additional sketchers using the drop-down menu in the bottom right corner. separate multiple products using the sign from the drop-down menu.

Answers

karl Ziegler reported that alkenes react with N- bromo succinamide in the presence of light to give products resulting from substitution of hydrogen by bromine at the allylic  .

Hydrogen's potential as a domestic alternative fuel source, capacity to power fuel cells in zero-emission cars, quick filling time, and  hydrogen hashigh efficiency all contribute to its appeal as a transportation fuel.Important nutritional sources of bromine  include grains, nuts, shellfish, and sea salt. For making bread and other baked items, brominated flour is occasionally used.The signs and symptoms of poisoning include lacrimation and redness of the eyes, irritation of the nose and throat, coughing, and dyspnea. Abdominal discomfort, hemorrhagic gastroenteritis, and subsequent shock can all result from ingesting liquid bromine.

Learn more about bromine here:

https://brainly.com/question/29028678

#SPJ4

according to dr. martin seligman, which property/properties must an element have to be considered an element of well-being?

Answers

According to Dr. Martin Seligman, there are five essential elements that must be present for an individual to experience well-being:

Positive emotionEngagementRelationshipsMeaningAccomplishment

The Five Essential Elements of Well-Being

Well-being is a state of mind, body, and spirit that allows individuals to be at peace, content, and fulfilled in their lives. Dr. Martin Seligman, a leader in the field of Positive Psychology, has identified five essential elements that must be present for an individual to experience a true sense of well-being.

Positive emotion involves feeling joy, pleasure, and satisfaction in life. This can be achieved through self-care activities such as:

MeditationYogaRelaxation techniques

It is important to find activities that bring you joy and make you feel connected to yourself, other people, and the world around you.

Learn more about Elements of Well-Being:

https://brainly.com/question/3569723

#SPJ4

calculate the ph of the following two buffer solutions: (a) 1.0 m ch3coona/2.0 m ch3cooh. (b) 0.1 m ch3coona/0.2 m ch3cooh. which is the more effective buffer? a. 1.0 m ch3coona/2.0 m ch3cooh b. 0.1 m ch3coona/0.2 m ch3cooh

Answers

pH of (a) = 5.081 and  pH of (b) = 4.479. The effective buffer is  1.0M CH3COONa / 2.0 m CH3COOH.

What is buffer solution?

Buffer Solution is a water-based solvent-based solution composed of a weak acid and its conjugate base, or a weak base and its conjugate acid.

We know that,

pH = pKa + log[salt] / [acid]

For  1.0M CH3COONa / 2.0 m CH3COOH

Given,

[Salt] = CH3COONa = 1.0M

[Acid] = CH3COOH = 2.0M

pKa of CH3COOH = 4.78

Subsituting the values,

pH = 4.78 + log[1.0] / [2.0]

pH = 4.78 + 0.3010

pH = 5.081

For  0.1M CH3COONa / 0.2M CH3COOH

Given,

[Salt] = CH3COONa = 0.1M

[Acid] = CH3COOH = 0.2M

Subsituting the values,

pH = 4.78 + log[0.1] / [0.2]

pH = 4.78 + (-0.3010)

pH = 4.479

The effective buffer is  1.0M CH3COONa / 2.0 m CH3COOH because the higher the concentrations, the bigger the total buffer capacity.

To know more about buffer solutions, check out:

https://brainly.com/question/27371101

#SPJ4

Simple chemical reactions reflect
Write a reflection about your learning in this unit. Your reflection should be at
least 3 sentences. Use the following sentence starters as a guide.
• I feel confident about identifying the types of bonds between atoms
because...
• I find it challenging to balance chemical equations because...
• To remember trends in the periodic table, one strategy I use is ...
• When I am unsure about how atoms are likely to bond, I can...

Answers

It displays the constituent elements and how many atoms of each element are found in a single complex molecule. It also represents the compound's molecular weight.

What are the five primary sorts of reactions?

Combination, decomposition, single-replacement, double-replacement, and combustion are the five fundamental types of chemical reactions. You can categorize a particular reaction by looking at the reactants and products of that reaction.

Which chemical process is most prevalent in daily life?

The method through which autotrophs often produce their food is referred to as photosynthesis. It is a typical chemical reaction that occurs naturally. When there is sunshine and chlorophyll, plants make glucose as a kind of energy.

To know more about chemical reaction visit:

https://brainly.com/question/22817140

#SPJ1

the human resource manager at a pharmaceutical company is beginning the selection process for a new chemist. she would begin with the

Answers

A pharmaceutical company's human resource manager is starting the hiring process for a new chemist. She would start by going through orientation.

What is human resources management?

The strategic method of developing and assisting people and providing a positive work environment is known as human resource management. Although its duties vary across various organizations and industries, they often include hiring, paying and providing benefits, providing training and development, and managing employee relations.

What is the role of HR in pharmaceutical company?

To appreciate the significance of hiring and staffing should be aware of Orientation and Induction's significance. being aware of the significance of training and development to appreciate the significance of performance management and evaluation in order to appreciate the significance of employee retention

Learn more about human resource management visit:

https://brainly.com/question/23428372

#SPJ4

EXPERIMENT 1: Which type of half-cell, when used along with a Mn/Mn2+ half-cell, gives the largest cell potential? Select one: O a. Cu2+/cu o b. Pb2+/Pb o c. Zn²+Izn od. The potential for all three cells is the same.

Answers

the largest cell potential when used along with a Mn/Mn2+ is Cu²⁺/Cu

A voltaic cell or galvanic cell is a battery that uses electrochemical energy produced from redox reactions to produce electricity. In this reaction, manganese is the anode and copper is the cathode.

Half-cell responses and respective cell potentials are shown below.

Mn = Mn²⁺ + 2e⁻        E°=-1.18V

Zn²⁺ +2e⁻  = Zn          E° = -0.76V

Pb²⁺ + 2e⁻ = Pb          E° -0.13

Cu²⁺ + 2e⁻ = Cu          E° 0.34

When Solving Cell Potentials

E° cell = E° cathode -E° anode

for Mn and Zn.

Mn (s) + Zn²⁺(aq)→ Mn²⁺(aq)+Zn(s)

E° cell = −0.76v−(−1.18v)=0.42v

For Mn and Pb the following applies:

Mn(s)+ Pb²⁺(aq) → Mn²⁺(aq) + Pb(s)

E° cell = −0.13v−(−1.18v)=1.05v

For Mn and Cu:

Mn(s)+ Cu²⁺(aq) → Mn²⁺(aq) + Cu(s)

E° cell = 0.34-(-1.18) = 1.52V

The Cu  happens to be the largest among the others.

learn more about cell potential at https://brainly.com/question/13134808

#SPJ4

2. which class of organic molecules had the larger retention times? why? (explain using intermolecular inter- actions)

Answers

The class of organic molecules had the larger retention times is the compounds which  have strong intermolecular interaction with high boiling points have longer retention time.

The organic molecules that have strong intermolecular interaction with the column coating will favor the stationary phase and they takes the longer time that means they will have longer retention time. the organic molecules that have weak intermolecular interaction with column coating spend little time. the retention time for the organic molecules are affected by then intermolecular interaction.

Thus, the more is the interaction between the analyte and the stationary phase the longer will be the retention time.

To learn more about intermolecular interaction here

https://brainly.com/question/29362662

#SPJ4

mevalonate exists in equilibrium with compound x in aqueous solution. what is the structure of compound x?

Answers

Mevalonate exists in equilibrium with compound x in aqueous solution.  the structure of compound x is a six membered ring.

The six membered is thermodynamically more stable so, the compound formed is six membered ring is more favorable. the both the  four membered and the peroxide are the high energy species. so, these are not able to form stable molecule as mevalonate. mevalonic acid is the organic compound discussed in the biochemistry. mevalonic acid contains the -CO₂H and -OH groups.

Thus , for the mevalonate exits is in the equilibrium compound x and the compound x is called the six membered ring.

To learn more about compound here

https://brainly.com/question/7285058

#SPJ4


1. What are the 5 pieces of evidence that prove a chemical change has taken place?

Answers

color change, heat/ bubbles form, formation of a precipitate, formation of gas, odor
Other Questions
if a $10,000, 12%, 10-year bond that pays interest annually sells at an amount greater than face value, the market rate of interest would be percent. 8 15 20 18 Work out the length of ab a=-1.6 b=5.3 give your answer explain why the government spending (g) component of gdp falls short of actual government expenditures? 20 POINTS will give brainliest Find the missing number so that the equation has no solutions2x + 11 = x + 21 + __x a 5b 2 c -2 d -3 A new movie streaming service opens and it charges a $9 sign up fee. Streaming 10 movies costs a total of $14, including the sign up fee. Augusto wants to prove to his parents that watching TV while he does his homework will help him get better grades. He decides to ask 20 of his friends if they watch while they do theirhomework and what their grades are. He finds that his friends who have high grades also watch TV while they do their homework. He tells his parents that he has proven that watching TVwhile doing homework will cause his grades to improve. What mistake has Augusto made? (6 points) He did not use a random sample, and he tried to show cause and effect with an observational study.O He did not use random sample, and he tried to show cause and effect with an experiment. He did not separate his friends into different groups, and he didn't apply a treatment. He did not separate his friends into different groups, and he used survey to collect data. interest rate fundamentals: the real rate of return carl foster, a trainee at an investment banking firm, is trying to get an idea of what real rate of return investors are expecting in today's marketplace. he has looked up the rate paid on 3-month u.s. treasury bills and found it to be . The electricity cost y, in dollars, to use ahair dryer for x minutes can be representedby the equation y = 0.002x. The electricitycost to use a space heater is shown on thegraph. Which appliance is more expensiveto use? Explain. (Example 4)Space Heater0.090.080.070.060.050.040.030.020.010Electricity Cost ($)y123456789Time (min)X which of the following is a benefit to integrating crm software into an existing erp? more than one answer may be correct. problem 3.7. suppose integer polynomials p and q satisfy that p ( x)/ q ( x ) is an integer for infinitely many integer inputs x. does it follow that q ( x ) divides p ( x ) ? the tbp videos say that a major theme in 1 and 2 samuel is that god opposes the proud and exalts the humble. how does this theme play out in the lives of saul and david? how has this theme played out in your life? which factor is not considered in the oig work plan? mandatory requirements for oig reviews, as set forth in laws, regulations, or other directives. requests made or concerns raised by congress, hhs management, or the office of management and budget. top management and performance challenges facing hhs. inconvenience to the healthcare industry. The term _____________ describes a situation where a ________________ causes a reduction in the buying power of income, even though actual income has not changed.A. substitution effect; lower priceB. intertemporal budget; higher priceC. income effect; higher priceD. intertemporal budget; lower price a polymerization reaction is a process that joins together monomers to create very long polymer chains, which can be thought of as: A bowler uses a lane with a coefficient of kinetic friction of 0.211. The bowler releases her 5.20 kg bowling ball with a translational speed of 2.35 m/s. At the moment of release, the ball is not rotating. As the ball slides, it begins to rotate.What is the work nc done by friction on the ball before it transitions to rolling without slipping? Use =9.81 m/s2 for the acceleration due to gravity. The Phoenician manufactured item out of __________. A) gla and metalB) gigantic lab of toneC) animal hair T/F Dcog believes in studying our interactions with artifacts, cultural systems., and other ppl is important. but cognition still occurs primarily in human brain what are some strategies that caregivers may use to reduce the development of dental caries and other related dental problems during childhood? A user writes down details from a report stored on a classified system marked as Secret and uses those details to draft an unclassified briefing on an unclassified system without authorization. What is the best choice to describe what has occurred? which group describes the members of the democratic party who supported andrew jackson?responsesgroup agroup agroup b