Answer:
Geologic carbon sequestration is the process of storing carbon dioxide (CO2) in underground geologic formations. The CO2 is usually pressurized until it becomes a liquid, and then it is injected into porous rock formations in geologic basins. This method of carbon storage is also sometimes a part of enhanced oil recovery, otherwise known as tertiary recovery, because it is typically used later in the life of a producing oil well. In enhanced oil recovery, the liquid CO2 is injected into the oil-bearing formation in order to reduce the viscosity of the oil and allow it to flow more easily to the oil well.
Biologic carbon sequestration refers to storage of atmospheric carbon in vegetation, soils, woody products, and aquatic environments. For example, by encouraging the growth of plants—particularly larger plants like trees—advocates of biologic sequestration hope to help remove CO2 from the atmosphere.
Hope this helped!
What volume of 15.9 M Nitric acid would be required to make 7.2 L of 6.00 M nitric acid? (hint: dilution problem) will mark brainliest if correct
a. 2.72 L
b. 686.88 L
c. .075 L
d. 272
Answer:
d
Explanation:
Circle the solution with the highest concentration
a. 5.0M
c. 0.6M
b. 1.0M
d. 0.75M
Answer:
answer is option a..............
The total pressure of an 02-Ar-He gas mixture is 755 mmHg. If the partial pressure of Ar is 174 mmHg
and the partial pressure of He is 389 mmHg,
then the partial pressure of 02 is what?
Answer the question in image attached
Thanks!
Answer: i think the 3,4,2
Explanation:
Answer:
i think its 2, 3 and 4
ionic and molecular compounds, polyatomic ions, ch chemical equations
which of the following does not contain a covalent bond ( please answer asap!! )
Answer:
Option 4
Explanation:
Which pollution effects the environment the most?
A. air pollution
B. water pollution
C. land pollution (ex. throwing trash in nature)
D. Noise pollution
Answer:
Air pollution effect the most
ANSWER :
A. air pollutionExtra Information :
❥ Air pollution can damage crops and trees in a variety of ways.
❥ Ground-level ozone can lead to reductions in agricultural crop and commercial forest yields, reduced growth and survivability of tree seedlings, and increased plant susceptibility to disease, pests and other environmental stresses (such as harsh weather).
Hope it helps ya...!!♡
Een luipaardgekko weegt gemiddeld 100 g, figuur 7.33.
c Denk je dat de gekko als hij 60 kg weegt in plaats van
100 g even gemakkelijk over het plafond kan lopen?
Answer:
english?
Explanation:
In a neutral solution, the concentration of H+ is
Group of answer choices
Answer:
equal to [OH-]
Hydrogen ion concentration is more conveniently expressed as pH, which is the logarithm of the reciprocal of the hydrogen ion concentration in gram moles per liter. Thus, in a neutral solution the hydrogen ion (H+) and the hydroxyl ion (OH−)
What is one question I would ask from conducting a research on inhalants?
A 125 ml sample of gas is at STP how many moles of gas are in the sample
Answer:
5.58*10⁻³ moles of gas are in the sample.
Explanation:
The STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.
Being 1000 mL equivalent to 1 L, then 125 mL is equal to 0.125 L. Then you can apply the following rule of three: if by STP conditions 22.4 L are occupied by 1 mole, 0.125 L are occupied by how many moles?
[tex]amount of moles=\frac{0.125 L*1 mole}{22.4 L}[/tex]
aomunt of moles= 5.58*10⁻³ moles
5.58*10⁻³ moles of gas are in the sample.
Answer:
5.58×10⁻³ moles of gas
Explanation:
There is a rule that says, that 1 mol of any gas, at STP is contained at 22.4L of volume.
We can apply a conversion factor
0.125 L . 1 mol / 22.4 L = 5.58×10⁻³ moles
Notice we converted volume from mL to L
We can also aply the Ideal Gases Law.
At STP we have 1 atm of pressure and 273.15K of T°
We replace data: 0.125 L . 1 atm = n . 0.082 . 273.15K
(0.125 L . 1 atm) / (0.082 . 273.15 K) = n
n = 5.58×10⁻³ moles
What is the formula of the compound that occurs when Strontium and Chlorine combine
ionically?
Answer:
SrCl2
Explanation:
What is the molarity of a 1.283 L solution that is made from 16.88 g of NaCl?
Answer in units of M.
Answer:
0.225M
Explanation:
Equation: M=n/v
n = moles of solute
v = liters of solution
NaCl = 58.443 g/mol
16.88/58.443= 0.289 moles of NaCl
0.289/1.283=0.225M
What is the mass of 34.6 L of oxygen? How many molecules of oxygen are in 34.6 L of oxygen?
Answer:
49.4 grams; 9.29 x 10^23 molecules O2
Explanation:
In order to solve for the mass of oxygen, you first must find out how many moles of oxygen there are in 34.6 L.
There are 22.4 L in one mole of gas, so to get amount of moles, divide 34.6 by 22.4.
34.6 / 22.4 = 1.544 mol
In order to calculate mass, multiply the amount of moles by the molar mass of oxygen, which is in this case 32.00 g/mol.
1.544 * 32.00 = 49.4 grams
To calculate the amount of molecules, multiply the amount of moles by Avogadro's number, 6.02 x 10^23, which basically represents how many atoms/molecules there are in a mole of any substance.
1.544 * (6.02 x 10^23) = 9.29 x 10^23 molecules O2
Which statement is true about molarity and percent by mass? (3 points)
Question 4 options:
1)
Both are ratios of the amount of solute over the amount of solution.
2)
They are ratios of the dilution over the concentration.
3)
They are inversely related.
4)
Both measure dilution.
Answer:
The correct answer is - Both are ratios of the amount of solute over the amount of solution.
Explanation:
Molarity is the number of moles of a substance in 1 liter of the solution. Another unit of the concentration, weight percentage, refers to the ratio of the mass of the solute (a dissolved substance) to the mass of the solution.
Molarity is to divide moles by liters, but the convention in mass percent is to divide grams by milliliters. If you prefer to think only in terms of liters (not milliliters), then simply consider mass percent as kilograms divided by liters.
Answer:
A. Both are ratios of the amount of solute over the amount of solution.
Hope this helps! :D
Explanation:
Which of the following elements has the lowest electron affinity?
a. Si
b. F
c. Cl
d. K
Answer:
k
Explanation:
electron affinity (EA) depends on various factors like effective nuclear charge (enc) , size of the atom, ellipticity of sub-shell (ep) , nature of configuration.
more is the enc more will be the EA
more is the size less will be the EA
more valance shell ellipticity (closer to the nuclei) more will the EA ( all given element posses P orbital in the valance shell)
Of the following which atom pairs will form covalent bonds
Answer:
si and p
o and F
Explanation:
covalent bonds are formed between non metals
1 cannot be accepted as Na is a metal
3 cannot be accepted as Ca is a metal
5 cannot be accepted as Mg is a metal
What is the molarity of 15.0 milliliters of an unknown acid that is titrated
with a 1.25 M NaOH solution and required 24.65 milliliters of base to
complete the titration?
Answer:
~2.054M
Explanation:
In this question ,I am going to assume that the acid is monoprotic acid(contains only one hydrogen) which I'll represent by HA.
Chemical equation:
NaOH(aq) + HA(aq)----->NaA(aq) + H2O(l)
The mole ratio of NaOH:HA is 1:1
1.25M NaOH=1.25 Moles/L or 1.25 moles /1000ml of NaOH
(1.25 moles /1000ml) x (24.65ml)=0.0308125 moles NaOH
Mole ratio is 1:1
So, moles of HA are also 0.0308125 moles
volume of HA =15ml
To find molarity of HA:
=(0.0308125 moles x 1000ml)/(15ml)
~2.054M of HA
~Hope it helps:)
Juan Carlos placed 35 grams of ice into a dry, 200-gram container. The top
of the container was attached tightly. When the ice was completely melted, the
student measured the mass of the container with the liquid water. What should the
mass of the liquid water in the container be?
A. 35 grams
B. 165 grams
C. 200 grams
D. 235 grams
Mass of the liquid water in the container is 35 grams-
Mass doesn't depends upon the state of compounds.The mass of the liquid water in the container should be 35 grams.
Mass would not change during a change of state because the number of particles does not change during a state change. It does not matter if a substances freezes, boils, melts, sublimates.
So, the mass of liquid water in the container is the same as ice. Hence, the correct option is (A).
To know more about:-
brainly.com/question/11810264
Which equation represents conservation of charge? 1 + 2e → 12 2 21° 12 +2e 3 Br2 → 2Br + 2e Br + 2e Br
*With explanation
Answer:
Question is tough
Explanation:
I don't know sorry dude
Answer:2l- —> l2 + 2e
Explanation:
What moon phase happens 2 weeks after this moon phase?
First Quarter
O Full Moon
Last Quarter
New Moon
Who has played Amoung us and a stranger got ur number or location on there?
Yep, it happened to me
pls balance this in Lcm method AL BR3 + K2 SO4 -----> KBr +AL2 (SO4)3
Explanation:
I wasn't taught lcm method
I only know the trial and error method
2AlBr3 + 3K2SO4 ----6KBr + Al2(SO4)3
Consider the following reaction:
CH3COOH + H2O CH3COO- + H3O+
A buffer solution is prepared by adding NaCH3COO(s) to CH3COOH(aq). What happens to the equilibrium when a few drops of NaOH solution are added to the buffer?
A. It shifts left and [CH3COO-] increases.
B. It shifts left and [CH3COO-] decreases.
C. It shifts right and [CH3COO-] increases.
D. It shifts right and [CH3COO-] decreases.
Answer:
I would say:
C. It shifts right and [CH3COO-] increases.
Explanation:
I am uncertain, but since NaOH is basic I think it should shift right.
hope this helps though
When 3.20 moles of magnesium is heated and placed in a container of nitrogen gas the two substances undergo a synthesis reaction. How many moles of nitrogen gas will react? 3 Mg (s) + 1 N2 (g) → 1 Mg3N2 (s)
Answer:
1.06 moles of nitrogen gas will react with 3.20 moles of magnesium in the container.
Explanation:
[tex]3 Mg (s) + 1 N_2 (g) \rightarrow 1 Mg_3N_2 (s)[/tex]
Moles of magnesium heated = 3.20 mol
According to reaction, 3 moles of magnesium reacts with 1 mole of nitrogen gas, then 3.20 moles of magnesium will react with:
[tex]=\frac{1}{3}\times 3.20 mol=1.07 \text{ mol of }N_2[/tex]
1.06 moles of nitrogen gas will react with 3.20 moles of magnesium in the container.
Fusion reactions power the _____ in space. Humans currently use fusion in _____ , but researchers are seeking more applications.
Answer:
Sun and the stars, nothing humans don't use fusion at all
Explanation:
Nuclear fusion reactions power the sun in space. Humans currently use fusion in nuclear weapons by means of nuclear reactions, but researchers are seeking more applications.
What are nuclear reactions?There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.
In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.
In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.
Learn more about nuclear reactions,here:
https://brainly.com/question/12649087
#SPJ7
Water flows more easily than syrup, which means water has
A. higher viscosity than syrup
B. lower viscosity than syrup
C. equal viscosity to syrup
Answer:
lower viscosity than syrup
Answer:
higher viscosity than syrup flows more easily than syrup.
Please give me Brainliest answer
what element does HgNo
Answer:
Mercury is a chemical element with symbol Hg and atomic number 80. Classified as a transition metal, Mercury is a liquid at room temperature.
...
Explanation:
Answer:
Mercurous nitrate!
Perform the following
mathematical operation, and
report the answer to the
appropriate number of
significant figures.
4.7257 - 3.12 = [?]
Answer:
1.61
Explanation:
I got this answer from a calculator and it's correct.
HELP ASAP PLEASE CHEMISTRY
The rate of reaction was measured during a chemical reaction. After the first 3 seconds, the rate of reaction was 1.8 x10−6 M/s. Which of the following would you expect after another 3 seconds?
The rate would be lower, and the concentration of products would be higher.
The rate would be lower, and the concentration of products would be lower.
The rate would be higher, and the concentration of products would be higher.
The rate would be higher, and the concentration of products would be lower.
Answer:
The rate would be higher, and the concentration of products would be lower.
Explanation:
The correct answer is The rate would be lower, and the concentration of products would be higher.
The rate of reaction refers to the speed with which reactants are converted into products.
The rate of reaction decreases as the reaction progresses because more reactants are being converted into products.
As such, the reactant concentration decreases and the concentration of products increases.
Hence, after three seconds, the rate would be lower, and the concentration of products would be higher.
https://brainly.com/question/23761331
Which is true for a substance that releases energy?
OA. The energy release decreases the molecular motion and the kinetic energy of the substance.
B. The energy release decreases the molecular motion but increases the kinetic energy of the substance.
C. The energy release increases the molecular motion and the kinetic energy of the substance.
D. The energy release increases the molecular motion but decreases the kinetic energy of the substance.
E. The energy release is used only to change the state of the substance.