For the following example identify the following h2o
Answer:
Explanation:
Well you didn’t send a picture of the question but h2O is water so. If the questions answer has a option of water then pick that one
state two applications of simple distillation of separating mixture
Answer:
Purify drinking water of unwanted
chemicals andminerals such as salt.Hope this helps! :D
A galvanic cell generates a cell potential of 0.32V when operated under standard conditions according to the reaction above. Which conditions are needed to construct a similar cell that generates the lowest cell potential?
The complete question is shown in the image attached to this answer.
Answer:
C
Explanation:
Let us quickly remember that the EMF of a cell under non standard conditions in given by the Nernst equation.
This equation states that;
E = E°cell - 0.592/n log Q
Where
E = EMF under non standard conditions
E°cell= standard EMF of the cell
n = number of electrons transferred
Q = reaction quotient
If the reaction quotient is greater than 1 then cell potential is less than the standard cell potential.
The cell that generates the lowest cell potential is the cell depicted in option C because Q has the greatest positive value(Q<1).
The cell potential is the redox potential that measures the acquired to lost electrons at the electrodes. The lowest cell potential is generated by cell C with 0.5 M.
What is EMF?EMF is the electromotive force that is the total of the electric potential difference produced at the half cells of the galvanic cell (electrochemical cell).
EMF of the cell is given as,
[tex]\rm E = \rm E^{\circ} - \dfrac{0.592}{n}\; log Q[/tex]
Here, E is the electromotive force, [tex]\rm E^{\circ}[/tex] is the standard EMF, n is the number of the transferred electrons, and Q is the reaction quotient.
When the reaction quotient (Q) is greater than 1 then, cell potential will be less than standard cell potential.
Therefore, cell C with 0.5 M and Q > 1 is a similar cell.
Learn more about galvanic cells here:
https://brainly.com/question/23819073
I need to know the answer asap
Which example of regeneration is also considered reproduction?
Explanation:
Regeneration is a type of asexual reproduction in which the organism is capable of regrowing certain body parts.
Answer: Regeneration is defined as organism's ability to regrow damaged or lost body parts. It is a type of asexual reproduction which is shown by many fully differentiated organisms. Organism such as Hydra uses regenerative cells for reproduction in the process of budding. The young Hydra gets its nourishment from the parent.
Explanation:
The force needed to overcome the attraction among molecules at the surface of a liquid is called?
Answer:
The type of force is known as cohesive force
How many grams of potassium carbonate are needed to make 200 mL of a 2.5 M solution?
If I want to use 78 grams of isoproponol (C3H8O) in a reaction, how many mL do I need of a 3.4 M solution?
I have two solutions. In the first solution, 1.0 moles of sodium chloride is dissolved to make 1.0 liters of solution. In the second one, 1.0 moles of sodium chloride is added to 1.0 liters of water. Is the molarity of each solution the same? Explain your answer
Please help, thanks!
Answer:
The molecular formula for Potassium Carbonate is K2CO3. The SI base unit for amount of substance is the mole. 1 grams Potassium Carbonate is equal to 0.0072356020563581 mole. Note that rounding errors may occur, so always check the results.
Explanation:
The molecular formula for Potassium Carbonate is K2CO3. The SI base unit for amount of substance is the mole. 1 grams Potassium Carbonate is equal to 0.0072356020563581 mole.
what is a recessive allele in a genotype is represented by pleaseee helpp
Cyclohexane (C6H12) is found in gasoline. It is burned for fuel in a combustion reaction. The unbalanced combustion reaction for octane is shown below. C6H12 + O2 + CO2 + H2O + heat When the reaction is balanced, how many carbon dioxide molecules are produced for every cyclohexane molecule burned? O A1 O B. 9 O c. 6 O D. 3
Answer:
6
Explanation:
C[tex]_6[/tex]H[tex]_{12}[/tex] + O[tex]_2[/tex] → CO[tex]_2[/tex] +H[tex]_2[/tex]O + heat can be balanced as C[tex]_6[/tex]H[tex]_{12}[/tex] + 6O[tex]_2[/tex] → 6CO[tex]_2[/tex] +6 H[tex]_2[/tex]O + heat. Therefore, the correct option is option C.
What is combustion reaction?
Combustion is a chemical reaction that often involves the presence of oxygen and produces light and heat within the form of flames. Because of the physical characteristics of the chemical process and the fact that more energy is produced than can be released through the surrounding medium, the rate or speed with which the substances that react combine is high. As a result, the ambient temperature about the reactants is increased, accelerating the reaction even further.
A lit match is a common illustration of a combustion reaction. A flame is produced when a match strikes something because friction warms the head of the match to a temperature where the chemicals respond by creating additional heat than can be released into the atmosphere. C[tex]_6[/tex]H[tex]_{12}[/tex] + O[tex]_2[/tex] → CO[tex]_2[/tex] +H[tex]_2[/tex]O + heat can be balanced as C[tex]_6[/tex]H[tex]_{12}[/tex] + 6O[tex]_2[/tex] → 6CO[tex]_2[/tex] +6 H[tex]_2[/tex]O + heat
Therefore, the correct option is option C.
To know more about combustion reaction, here:
https://brainly.com/question/13096727
#SPJ7
The warming of our atmosphere is due to contain gases like carbon dioxide and water vapor called greenhouse gases that insulate (trap heat) Earth. What would happen to Earth without these greenhouse gases?
Answer:
the earth would be covered in ice and we would not be able to survive as there is not natural insulation
why are some properties of water different than those of the reactants gases
Answer:
The difference in the properties of water can be attributed to physical changes to the hydrogen and oxygen atoms on a subatomic level. The properties of the gases are combined to give water its properties. When substances chemically combine, products with completely different properties form.
Answer:
They are composed of different atoms
Explanation:
The guy above me said it better :|
desperate, please help ASAP and check over
Name the functional group in the
following molecule:
CH3CH2OCH2CH3
A ester
B. acid anhydride
C ketone
D. ether
Answer:
d
Explanation:
i just did it
The functional group in the following molecule CH₃CH₂OCH₂CH₃ is ether.
What is functional group?Functional group is defined as a substituent or group of atoms or an atom which causes chemical reactions.Each functional group will react similarly regardless to the parent carbon chain to which it is attached.This helps in prediction of chemical reactions.
The reactivity of functional group can be enhanced by making modifications in the functional group .Atoms present in functional groups are linked to each other by means of covalent bonds.They are named along with organic compounds according to IUPAC nomenclature.
Functional group inter conversion is also possible by retro -synthesis.In some cases , functional groups can be charged molecules.
Learn more about functional group,here:
https://brainly.com/question/14618322
#SPJ7
Which of these metals reacts more vigorously with water?
1. Zinc
2. Magnesium
Answer:
magnesium
Explanation:
because zinc does not react with water because it too forms a protective layer of insoluble.
Which type of molecule is shown below? I CH3 C=C H CH3 O A. Alkene O B. Cyclic alkane O C. Alkane O D. Alkyne
Answer:
Alkene
Explanation:
Took the test.
The correct answer is Option (A) Alkene.
What is Alkene?Alkenes are the hydrocarbon which contain double bond of carbon and carbon.The general formula of alkene are CnH2n.Alkenes are unsaturated hydrocarbons. Why other options are incorrect?The other options are incorrect because the structure given in the question is C4H8. The IUPAC name of the structure is is 1- butene .The structure describes the general formula of alkene CnH2n where we can say that n= 4Hence , Option (A) is correct and rest options are incorrect.Learn more about Alkenes below
https://brainly.com/question/24033294
#SPJ2
How many grams of NaCI are dissolved in a 500.0 mL of a 0.04M solution of NaCI?
A: 0.05 g
B: 1.17 g
C: 1.46 g
D: 2.92 g
Answer:
B 1.17
Explanation:
There is .02 mols of nacl in a .4M solution
so you multiply by the molar weight of NaCl (58.44)
What volume in liters of fluorine gas is needed to form 999 L of sulfur hexafluoride gas if the following reaction takes place at 2.00 atm and 273.15 K: S(s) + 3F₂(g) → SF₆ (g)
Answer: A volume of 2997 liters of fluorine gas is needed to form 999 L of sulfur hexafluoride gas if the given reaction takes place at 2.00 atm and 273.15 K.
Explanation:
The given reaction is as follows.
[tex]S(s) + 3F_{2}(g) \rightarrow SF_{6}(g)[/tex]
This show that 3 moles of fluorine is reacting to give 1 moles of sulfur hexafluoride.
According to the ideal gas formula,
PV = nRT
This means that volume of a gas is directly proportional to the number of moles. Hence, volume of fluorine required is calculated as follows.
[tex]3 \times 999 L\\= 2997 L[/tex]
Thus, we can conclude that a volume of 2997 liters of fluorine gas is needed to form 999 L of sulfur hexafluoride gas if the given reaction takes place at 2.00 atm and 273.15 K.
Sodium (Na) has an ionic charge of +1. Sodium forms an ionic bond with Chlorine (Cl) to form table salt. What charge must the chlorine ion have?
PLS ANSWER LEGITIMATLEY! THANKS! WILL MARK BRAINLIEST!
Explanation:
sodium has a positive charge and chlorine has a negative charge a negative and a positive charge you automatically for an ionic bond therefore the chlorine has to have a negative one charge
ррррно да
Level 1
12
11
10
B
2
IA А
3
С C
8.
7.
1 D
# - tic
А д-
а.
Answer:
tic
Explanation:
because it is my answer okay
What is the Chemical formula for K and P
Answer:
Potassium phosphide (K3P)
Which type of reaction to alkenes generally undergo?
Answer:
Two types of reaction
Explanation:
Alkanes undergo only substitution reactions but alkenes and alkynes undergo both substitution and addition reactions
There are ____ neutrons, ___ protons, and ____ electrons in 238U+5
Answer:
Explanation:
The atomic number of uranium (see periodic table) is 92, and the mass number of the isotope is given as 238. Therefore, it has 92 protons, 92 electrons, and 238 — 92 : 146 neutrons
Uranium has an atomic number of 92. There are 146 neutrons, 92 protons, and 92 electrons in 238U+5. The number of neutrons can vary from 141 to 146.
What is uranium ?Chemical element uranium has the atomic number 92 and the letter U. It is an actinide metal in the periodic table's silvery-gray series. There are 92 protons and 92 electrons in an atom of uranium, of which 6 are valence electrons.
Since uranium has an atomic number of 92, its atomic structure consists of 92 protons and 92 electrons. The nucleus of U-238 contains 146 neutrons, but this number can range from 141 to 146.
With 92 protons and 146 neutrons, Uranium-238 is the heaviest element in nature. The overall mass and charge of the nucleus are 238 nucleons, or +92.
Thus, Uranium has an atomic number of 92. There are 146 neutrons, 92 protons, and 92 electrons in 238U+5.
To learn more about uranium, follow the link;
https://brainly.com/question/24285205
#SPJ2
A student is performing an acid-base extraction on unknown compounds, and she extracts the organic layer with 5% HCl solution and separates off the aqueous layer. She then adds sodium hydroxide solution to the aqueous layer and observes a white precipitate. Which of the following functional group(s) is most likely in the precipitated compound?
a. ether
b. amine
c. carboxylic acid
d. ester
Answer:
amine
Explanation:
We have to bear in mind that amines are basic compounds. This idea will be very important in attempting to answer this question.
So, when she adds 5% HCl solution in order to extract the organic layer, the amine forms a hydrochloride salt which is contained in the aqueous layer.
The addition of a base such as NaOH leads to the formation of a white precipitate of the amine.
What is the relationship between temperature and volume?
Answer:
Charles's law states that the volume of a given amount of gas is directly proportional to its temperature on the kelvin scale when the pressure is held constant
The volume of a given gas sample is directly proportional to its absolute temperature at constant pressure (Charles's law). The volume of a given amount of gas is inversely proportional to its pressure when temperature is held constant (Boyle's law)
Explanation:
~Hope this helps
What is the name of Earth's home galaxy?
The Milky Way
The Elliptical
The Spiral Way
The Irregular
100 points
Answer:
The Milky Way
Explanation:
Answer:
Your answer is the Milky WAy!
Brainliest?
A student made a sketch of a potential energy diagram to represent a reaction with a -^H
Explain, using complete sentences, why the diagram made by the student is correct or incorrect. Be sure to also explain
what the values of X and Y represent.
Answer: It’s correct because it’s showing an exothermic reaction. x is the reactants and y is the products.
Explanation: -ΔH means the reaction is exothermic and releasing heat. This lowers the potential energy.
Answer:
answer above is correct
Explanation:
Uranium-235 decays to form lead-207. The half-life of uranium-235 is 704,000,000 years. What is the approximate age of an igneous rock with a 1:1 ratio of uranium-235 atoms to lead-207 atoms?
Answer:
The approximate age of the igneous rock is [tex]7.042\times 10^{6}[/tex] years.
Explanation:
Chemically speaking, the Uranium-235 decays to form Lead-207 throughout time. All isotopes decay exponentially by means of the following model:
[tex]m(t) = m_{o}\cdot e^{-\frac{t}{\tau} }[/tex] (1)
In addition, we can determine the time constant of the former isotope in terms of its half life, that is:
[tex]\tau = \frac{t_{1/2}}{\ln 2}[/tex] (2)
Where:
[tex]m_{o}[/tex] - Initial mass of Uranium-235, in atoms.
[tex]m(t)[/tex] - Current mass of Uranium-235, in atoms.
[tex]\tau[/tex] - TIme constant, in years.
[tex]t_{1/2}[/tex] - Half-life of Uranium-235, in years.
Please remind that a 1 : 1 ratio of Uranium-235 to Lead-207 atoms means that current mass of Uranium-235 is a half of its initial mass. If we know that [tex]m(t) = 0.5\cdot m_{o}[/tex] and [tex]t_{1/2} = 7.04\times 10^{8}\,yr[/tex], then the approximate age of the igneous rock is:
[tex]\tau = \frac{7.04\times 10^{8}\,yr}{\ln 2}[/tex]
[tex]\tau \approx 1.016\times 10^{9}\,yr[/tex]
[tex]t = -\tau \cdot \ln \left(\frac{m(t)}{m_{o}} \right)[/tex]
[tex]t = -(1.016\times 10^{9}\,yr)\cdot \ln \frac{1}{2}[/tex]
[tex]t \approx 7.042\times 10^{6}\,yr[/tex]
The approximate age of the igneous rock is [tex]7.042\times 10^{6}[/tex] years.
what class is sodiumtrioxocarbonate(IV) strong or weak base and why?
Answer:
Strong Base
Explanation:
sodiumtrioxocarbonate(IV) Na2CO3 exists in various forms such as; an anhydrous form or in a crystalline form. Usually, the manufacturing process of sodiumtrioxocarbonate(IV) Na2CO3 is known as the Solvay process.
Now, upon reaction, Na2CO3 reacts to yield CO⁻₃. That appears to be a conjugate base of a weak acid. Thus, the occurrence of the removal of H⁺ resultt into Carbonic acid, i.e. a Strong Base.
5. If 4 moles of nitrogen gas reacts with excess hydrogen gas, how many moles of NH3 will be produced?
Be sure to balance the equation first.
__N2 + __ H2 → __ NH3
a. 8 moles NH3
b. 4 moles NH3
C. 2 moles NH3
d. 12 moles NH3
250 mL of water is collected during a combustion reaction. The temperature in the
room is 23 °C and the pressure is 105 kPa. How many moles of water was collected?
Answer:
0.011 moles
Explanation:
Applying,
PV = nRT.................... Equation 1
Where P = Pressure, V = Volume, n = number of moles, R = Molar gas constant, T = Temperature.
Make n the subject of the equation
n = PV/RT.................. Equation 2
From the question,
Given: P = 105 kPa = (105×0.00986923) = 1.036 atm, V = 250 mL = 0.25 L, T = 23 °C = (273+23) = 296 °C
Constant: R = 0.082 atm.dm³/K.mol
Substitute these values into equation 2
n = (1.036×0.25)/(0.082×296)
n = 0.011 moles