Answer: 0.25 m/s
Explanation: Speed = wavelengt · frequency
v = λf and frequency is 1/period f = 1/T
Then v = λ/T = 5 m / 20 s = 0.25 m/s
Which scenario did not include a chemical change?
Answer:
what scenario i dont understand
Explanation:
step by step explenation
Why do we need satellites?
(There is no science colum)
Answer:
Because they provide information about clouds, oceans, land and ice.
Choose the correct answer?
Answer:
B
Explanation:
How many degrees equal π in radians? How many revolutions (turns) equal π radians?
Answer:
It follows that the magnitude in radians of one complete revolution (360 degrees) is the length of the entire circumference divided by the radius, or 2πr / r, or 2π. Thus 2π radians is equal to 360 degrees, meaning that one radian is equal to 180/π ≈ 57.295779513082320876 degrees.
Explanation:
Luna and Angela are competitors in a running competition. Both are leading the race and enter at the same time the last 30 meters. Angela enters the final segment runnning at 4 m/s and "applies" an acceleration of 2 m/s2 while Luna enters the final segment at 3m/s but "applies " an acceleration of 3 m/s2. (a) Who finishes the race first? (Do the calculations) (b) Who is running faster at the end of the race?
Answer:
(a) Luna
(b) Luna
Explanation:
(b)
The final speed can be found by using the third equation of motion:
[tex]2as = v_f^2 - v_i^2\\[/tex]
where,
a = acceleration
s = distance covered
vf = final speed
vi = initial speed
For Angela:
a = 2 m/s²
s = 30 m
vi = 4 m/s
vf = v_fa
therefore,
[tex]2(2\ m/s^2)(30\ m) = (v_{fa})^2 - (4\ m/s)^2\\v_{fa}^2 = 120 m^2/s^2 + 16\ m^2/s^2\\v_{fa} = 11.66\ m/s\\[/tex]
For Luna:
a = 3 m/s²
s = 30 m
vi = 3 m/s
vf = v_fl
therefore,
[tex]2(3\ m/s^2)(30\ m) = (v_{fa})^2 - (3\ m/s)^2\\v_{fa}^2 = 180 m^2/s^2 + 9\ m^2/s^2\\v_{fa} = 13.74\ m/s\\[/tex]
Therefore, Luna will be running faster at the end of the race.
(b)
To calculate the time of completion we will use the first equation of motion:
[tex]v_f = v_i + at[/tex]
FOR ANGELA:
[tex]11.66\ m/s = 4\ m/s + (2\ m/s^2)t_a\\t_a = \frac{7.66\ m/s}{2\ m/s^2}\\\\t_a = 3.83\ s[/tex]
FOR LUNA:
[tex]13.74\ m/s = 3\ m/s + (3\ m/s^2)t_l\\t_l = \frac{10.74\ m/s}{3\ m/s^2}\\\\t_l = 3.58\ s[/tex]
Hence, LUNA finishes the race first.
What force is caused by tiny collisions, called microwelds, on surfaces that
are stuck together?
A. heat
B. energy
C. air resistance
D. friction
Answer:
D. Friction
Explanation:
"Friction is caused by microwelds that form between two surfaces. Microwelds are stronger when the two surfaces are pushed together with a greater force." - ( Module 3 • Forces and Newton’s Laws) quoted
hope this helps and is right. p.s. i really need brainliest :)
Answer:
Friction
Explanation:
Took The Test
How is a plant able to cycle matter through the processes of cellular respiration and photosynthesis?
The carbon cycle refers to the processes by which carbon in the biosphere is recycled. Photosynthesis sucks carbon dioxide out of the atmosphere, while cellular respiration releases it into the environment. Photosynthesis is the process by which solar energy reaches a plant and is converted into glucose.
How photosynthesis and cellular respiration are similar:
Photosynthesis is a method by which plants and other organisms transform light energy into chemical energy, which is then released to fuel the organism's metabolic activities through cellular respiration.
A 100 N force is applied to move an object a horizontal distance of 5 meters at constant speed in 10 seconds. How much power is done?
Answer:
50 W
Explanation:
Given :Force applied = 100 NDistance covered = 5 metresTime = 10 secondsTo find :
Power
Solution :For calculating power, we first need to know about the work done.
[tex] \bf \boxed{Work = Force \times displacement} [/tex]
Now, substituting values in the above formula;
Work = 100 × 5
= 500 Nm or 500 J
We know that,
[tex]\bf \boxed{Power=\dfrac{Work\:done}{Time\: taken}}[/tex]
Substituting values in above formula;
Power = 500/ 10
= 50 Nm/s or 50 W
Hence, power = 50 W .
You are adding sugar to a cup of tea. What could you do to make the sugar dissolve
faster? (Select all that apply)
Stir/agitate
Heat the tea
Break the sugar into smaller parts
Keep adding more sugar
Answer:
Stir/agitate and heat the tea
Answer:
Stir the tea, Heat the tea, and Grind the sugar
Explanation:
Heating and stirring both increase the energy of the tea molecules, which increases interactions with the sugar. Grinding sugar allows more sugar molecules to be exposed to the solvent particles that dissolve them.
What do scientists use satellites for?
(there is no science colum)
Answer:
NASA satellites help scientists study Earth and space. Satellites looking toward Earth provide information about clouds, oceans, land and ice. They also measure gases in the atmosphere, such as ozone and carbon dioxide, and the amount of energy that Earth absorbs and emits. And satellites monitor wildfires, volcanoes and their smoke.
Explanation:
Hope this helps! :) have a great day.
1. GPS
2. Internet
3. Weather forecast
4. Observation
5. Experiments
6. Discovery
The small piston of a hydraulic lift has an area of 0.20 m2. A car weighing 1200 N sits on a rack mounted on the large piston. The large piston has an area of 0.90 m2. What is the mechanical advantage of the hydraulic lift?
Answer:
4.5
Explanation:
Given the following
Weight of the car = 1200N (Load)
Let us get the effort by using the formula;
F1/A1 = F2/A2
Substitute the given values
1200/0.9 = F2/0.2
Cross multiply
0.9F2 = 1200 * 0.2
0.9F2 = 240
F2 = 240/0.9
F2 = 266.67N
Hence the effort is 266.67N
Mechanical Advntage = Load/Effort
MA = 1200/266.67
MA = 4.5
Hence he mechanical advantage of the hydraulic lift is 4.5
A hockey puck slides with a constant velocity across a frictionless ice surface. In one paragraph, using your own words, describe the net force on the hockey puck and the observation which allowed you to draw that conclusion.
Answer:
The net force on the hockey puck is zero because it's acceleration is zero due to constant velocity.
The hockey will remain in it's uniform motion unless compelled by an external force.
Explanation:
[tex]from \: vector \: mechanics \\ a = \frac{dv}{dt} \\ but \: at \: constant \: velocity \\ \frac{dv}{dt} = 0 \\ hence : \: \: a = \frac{0}{dt} \\ a = 0[/tex]
The smaller the mass of an object, the _____ its inertia
Answer:
larger
Explanation:
just trust me
The smaller the mass of an object, the smaller its inertia, because the inertia of any object is directly proportional to the mass of the object
What is inertia?The ability of an object to resist changes in motion is known as inertia. The amount of inertia is directly related to an object's mass; in fact, as we frequently observe, the heavier an object is, the harder it is to change its direction of motion.
A straightforward illustration: While it is relatively simple to stop a tennis ball that has been thrown in our direction, we are aware that it is more difficult to stop a large truck that is moving in the same direction at the same speed. This is because the truck has a much higher mass than the tennis ball and a higher moment of inertia. As a result, inertia rises as mass does.
Since the inertia of any object is directly proportional to its mass, the smaller its mass, the less inertia it will have.
Learn more about Inertia from here
https://brainly.com/question/1358512
#SPJ5
Which of the following regions of the EM epxtrum has the highest
frequency?
1) x rays
2) microwaves
3) infrared light
4) ultraviolet light
Answer:
1) x rays
Explanation:
Honestly Gamma rays has the Highest frequency, but in your options, gamma rays is not among, so x rays has the highest frequency among your options.
by Manshow
Answer:
The answer is (X-rays)
number 1
How many cups of water should you drink in a day?
Answer:
about 2.7liters for women and 3.7liters for men
Explanation:
Which has a higher momentum, a 3.5kg bowling ball that is rolling at 30
m/s or a 50 kg student moving at 1.75 m/s?
Answer:
The answer of this question
Explanation:
a3.5 kg blowing ball that is rolling at 30 m/s
eating disorder Symptoms
Answer:
some symptoms can be lack of energy, and dizziness.
Explanation:
Q1) Calculate the gravitational force between two large trucks, each with a mass of 6500 kg, if
they are parked next to each other separated by a distance of 0.5 m Ignore all other
gravitational forces.
Answer:
F = 0.0112 N
Explanation:
Given that,
Masses, [tex]m_1=m_2=6500\ kg[/tex]
The distance between masses, d = 0.5 m
We need to find the gravitational force between two large trucks. The formula for the gravitational forces is given by :
[tex]F=G\dfrac{m^2}{r^2}\\\\F=6.67\times 10^{-11}\times \dfrac{6500^2}{(0.5)^2}\\\\F=0.0112\ N[/tex]
So, the required force between masses is equal to 0.0112 N.
A motorbike accellerates from 15m/s to 25m/s in 15 seconds. How far does thew motrobike trsavel in this time?
Answer:
300 m.
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 15 m/s
Final velocity (v) = 25 m/s
Time (t) = 15 secs
Distance (s) =?
The distance travelled by the motorbike can be obtained as follow:
s = (u + v)t / 2
s = (15 + 25) × 15 / 2
s = 40 × 15 / 2
s = 600 / 2
s = 300 m
Thus, the distance travelled by the motorbike is 300 m.
Consider again the civilization described in the previous question. (They live on a planet orbiting 10 AU from a close binary star system that consists of a 15 MSun red giant star and a 10 MSun black hole surrounded by an accretion disk.) Through a bizarre (and scientifically unexplainable) fluctuation in the space-time continuum, a copy of a book from that civilization arrives on your desk; it is entitled Iguoonos: How We Evolved. In the first chapter, you learn that these beings evolved from organisms that lived 5 billion years ago. Which of the following statements should you expect to find as you continue to read this book?
A. Their immediate ancestors were chimpanzees.
B. As a result of traumatic experiences to their evolutionary ancestors, they dislike television.
C. They evolved on a different planet in a different star system, and moved to their current location.
D. They evolved from primitive wormlike creatures that had 13 legs, 4 eyes, and bald heads, thus explaining why such critters are now considered a spectacular delicacy.
E. They believe that the presence of two stars in their system was critical to their evolution.
Utility companies charge by the kilowatt-hour. The number of kilowatt-hours used equals the number of kilowatts multiplied by the number of hours an electrical device was used. How long would it take for a 50-watt fan to use 1 kilowatt-hour of electricity? (Hint: 50 watts = 0.05 kilowatts.)
Answer:
t = 3 minutes
Explanation:
Given that,
Power of fan, P = 50 W
Energy used, E = 1 kWh
We know that,
Energy = Power/time
As, 50 watts = 0.05 kilowatts
So,
[tex]t=\dfrac{P}{E}\\\\t=\dfrac{0.05\ kW}{1\ kWh}\\\\t=0.05\ h[/tex]
or
t = 3 min
So, the required time is equal to 3 minutes.
Amy pulls a spring with a spring constant k = 100 stretching it from its rest length of 0.10 m to 0.2
Answer:
Elastic potential energy E = 0.5 J
Explanation:
Let us assume we have to find the elastic potential energy stored in the spring.
Given: k = 100
change in the length of the spring x = 0.2-0.1 = 0.1 m
Elastic potential energy
E = [tex]\frac{1}{2} kx^2[/tex]
plugging the values we get
[tex]E = 0.5\times100\times0.1^2\\=0.5 J[/tex]
Hence, Elastic potential energy E = 0.5 J
Amy pulls a spring with a spring constant k = 100 N/m, stretching it from its rest length of 0.10 m to 0.20 m.
What is the elastic potential energy stored in the spring?
Answer: 0.5 J
A 905 kg test car travels around a 3.25 km circular track. if the magnitude of the force that maintains the car's circular motion is 2140 N, what is the car's tangential speed?
An object is in motion if ___
Answer:
An object is in notion if its position change with time.
When ___ attacks the surface of a metal, it becomes tarnished.
Answer:corrosion (i believe)
Explanation:
Answer
Mix baking soda and salt with hot water and cover everything with it. The proportions are not crucial, but about 1 tablespoon of salt and 1 tablespoon of baking soda to 3 dl water should do the trick. Lightly tarnished objects should clean up in a few minutes, and you just rinse them of and dry them.
Explanation:
True or False: There are many different types of leukocytes.
True
False
How are radio waves modified to send information?
Answer:
Radio waves can be modified by their amplitude or frequency in order to transmit sound or data.
Explanation:
Hope this helped!!!
HELP
Which type of wave interaction is shown in the photo?
A. Interference
B. Refraction
C. Reflection
D. Diffraction
Answer: the answer is c (think bc im on that too)
Explanation:
The interference is a type of wave interaction shown in the photo. Option A is correct.
What is the interference of waves?The result of two or more wave trains flowing in opposite directions on a crossing or coinciding pathways. This phenomenon is known as the interference of waves.
The effect is the sum of the individual wave amplitudes at each site where more than one wave is present.
When two wave pulses are traveling along a string toward each other. They meet and the phenomenon is occur known as interference.
The interference is a type of wave interaction shown in the photo
Hence option A is correct.
To learn more about the interference of waves refer to the link;
brainly.com/question/16098226
Boxers wear gloves that are padded to lessen the force of a punch. Calculate the force exerted by a boxing glove on an opponent's face, if the glove and face compress 8.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. Give your answer in Newtons, do not include the unit in your answer.
Answer:
F = 4117.64
Explanation:
First, we will calculate the acceleration of the hand, by using the third equation of motion:
[tex]2as = v_f^2 - v_i^2\\[/tex]
where,
a = acceleration = ?
s = distance covered = compression = 8.5 cm = 0.085 m
vf = final speed = 0 m/s
vi = iniial speed = 10 m/s
Therefore,
[tex]2a(0.085\ m) = (0\ m/s)^2-(10\ m/s)^2\\a = - 588.23\ m/s^2[/tex]
negative sign hows deceleration.
Now, we will calculate the force exerted by the hand:
[tex]F = ma = (7\ kg)(588.23\ m/s^2)\\[/tex]
F = 4117.64 N
When setting your schedule, it is sometimes necessary to tell people "No." Please select the best answer from the choices provided. t or f
Answer:
True Edg2020
Explanation:
Answer: true
Explanation:
because I say so :P