Answer:
-0.21 if you're using C as your temperature.
0.018 if you're using K as your temperature.
Explanation:
This is similar to your other question, where we'll be using the formula for specific heat capacity: Q=mcΔT
Q = heat energy (Joules)
m = mass (g)
c = specific heat capacity > What we're solving for.
ΔT = change in temperature > final temp. - initial temp.
It would be helpful to know the units so you'll know what type of problem you're dealing with and what formula you should use. But you'll usually use this formula if they mention the specific heat of an material.
Let's plug in what we know.
700= (150)(c)(32-54)
700= (150)(c)(-22) we want to solve for c, to make it easier let's multiply the numbers on the right side so we'll have...
700=-3300c
Solve for c.
[tex]\frac{700}{-3300}[/tex] = c
-0.21 = c
This is in C though, your depending on your teacher they might want you to convert C to Kelvin (K). So Here is what it would be if it was in Kelvin.
700= (150)(c)(251)
700=37650c
0.018=c
what are the best topics to write a project work on EVS and Chemistry
Answer:
It is better to do chemistry
Explanation:
So that you will learn more of chemicals
The boat shown in the photo below is moving along at a constant 20 miles per hour. Is the boat accelerating? Question 3 options: A. No because it is not speeding up B. Yes because it is changing direction C. No because it is not slowing down D. Yes because the velocity is staying constant
Answer:
A
Explanation:
If its going at a constant speed it will not accelarate wich means to speed up.
The primary function of a chloroplast is to -
F . Convert food into energy a cell can use
G . Control the function of a cell and control genetic traits
H . Convert radiant energy into chemical energy through photosynthesis
J . Store water and nutrients
Please help!!!
Which statement best describes what makes a base weak? A base is weak when it forms few ions in water. A base is weak when only a little of it is dissolved in water. A base is weak when its concentration is high. A base is weak when it totally forms ions in water.
Answer:
A base is weak when only a little of it is dissolved in water
Explanation:
Answer: B.) A base is weak when only a little of it is dissolved in water
Hope this helps :)
If 5 moles of He gas at a pressure of 4.3 atm have a temperature of 277 K, what is the volume?
Answer:
PV= n RT
4.3×y = 5×277
4.3y =1385
4.3y÷ 4.3y = 1385 ÷ 4.3y
y = 322
A 2.0 L flask contains nitrogen and oxygen gases at 25°C. The total pressure is 0.91 atm and contains 0.050 mol of nitrogen. Calculate the partial pressure of oxygen and moles of oxygen present
Answer:
.025 ml 02
Explanation:
I made a pdf and pasted it in and etc
The chemical equation below shows the burning of magnesium (Mg) with oxygen (O2) to form magnesium oxide
(Mgo)
2Mg + O2 → 2Mgo
The molar mass of Oz is 32.0 g/mol. What mass, in grams, of Oz is required to react completely with 4.00 mol of Mg?
2.00
64.0
128
256
Answer:
64
Explanation:
B
A glass jar is sealed, trapping air inside. The jar warms up after it is left ourside in the sun. What will happpen to the pressure inside the jar? Explain by talking about particle collisions.
Answer:
the particles start to spread out and cause it to get warmer
Explanation:
Los ácidos y el pH son muy importantes en la digestión de los alimentos. Pero ¿por qué se pone en riesgo la salud con lo que comes?
Answer:
Plssssssssd can you translate to English???
define restivity and conductivity?
Answer:
Electrical resistivity is a property of a material that tells you how much it resists the flow of electric current, while conductivity quantifies how easily current flows.
The carbon dioxide is released when limestone is heated during the
production of _____?
Carbon dioxide is released when limestone is heated during the production of [tex]\sf\purple{cement}[/tex]. ✔
[tex]\circ \: \: { \underline{ \boxed{ \sf{ \color{green}{Happy\:learning.}}}}}∘[/tex]
True or False all non - metal elements are gassed at room temperature.
Answer:
false
Explanation:
you have bromine , its a non metal and liquid in room temperature
3. A PS6 plugged into a 120 V outlet uses 3 Amps. What is the Resistance rating of
the power cord?
voltage: V=
current: 1 =
resistance: R=
V=IxR
1=VR R
Underline/Bold Which Equation we are going to use:
= V
Plug in the numbers from above and solve for our answer:
Answer:
R = 40 ohms
Explanation:
Given that,
The voltage of outlet, V = 120 V
Current flowing through the device, I = 3 A
We need to find the Resistance rating of the power cord. Let the resistance is R. We know that,
Ohm's law, V = IR
Put all the values,
[tex]R=\dfrac{V}{I}\\\\R=\dfrac{120}{3}\\\\R=40\ \Omega[/tex]
So, the resistance rating of the power cord is equal to 40 ohms.
Explain how failing to conserve water can lead to an increase in water contamination.
Answer:
Failure to conserve water during irrigation can lead to an increase in pollution that results from runoff. Natural filters are diminished by the overuse of water resources, which leads to an increase in water contamination that would have been filtered by these natural sources.
Explanation:
Answer:
a. Overirrigating fields causes an increase in pollution that results from runoff.
b. Natural water filters are depleted by the overuse of water.
c. Sewage systems are more likely to fail due to greater demand, causing higher chances of water contamination.
which of the follwing is false ? A . the mass of proton is heavier than electron . B . protons and electron are found in nucleus C . Nucleus is very small but massive D . Neutrons are neutral particles
Answer:
C
Explanation:
The nucleus is very dense
5F248+ 2NH3(8) ► NF418 + 6HF
a) If you start with 3.6 g of NH, and excess F2, how many liters of HF at STP can you make?
Answer:
14.2L at STP
Explanation:
Based on the problem, 2 moles of NH3 produce 6 moles of HF. To solve this question we have to convert the mass of NH3 to moles. With the chemical equation find the moles of HF and using PV = nRT find the liters of HF:
Moles NH3 -Molar mass: 17.031g/mol-
3.6g NH3 * (1mol / 17.031g) = 0.211 moles NH3
Moles HF:
0.211 moles NH3 * (6mol HF / 2mol NH3) = 0.634 moles HF
Volume HF
PV = nRT; V = nRT/P
Where V is volume in liters, n are moles of the gas = 0.634 moles, R is gas constant = 0.082atmL/molK, T is absolute temperature = 273.15K at STP and P is pressure = 1atm at STP.
Replacing:
V = 0.634moles*0.082atmL/molK*273.15K / 1atm
V = 14.2L at STP
2CO +0, 200, what is the mole ratio of carbon monoxide to carbon
dioxide
A 1.2
B 2.2
C 2:1
D 3:1
Answer:
B. 2.2
Explanation:
45.6 grams of CH4 is placed into a 275 mL container at 55.00C. What is the pressure inside the container in atm?
Given-
Mass of CH4 - 45.6 grams
Molar mass of CH4 - 16.04 g/mol
volume - 275mL
Temperature- 55°C
Solution,
moles of methane (CH4) n = 45.6/16.04
= 2.84 moles
Using Formula,
Pv = nRT
P*275 = 2.84*8.314*55
P = 1298.64/275
P = 4.72 Atm.
Answer - The pressure inside the container in atm is 4.72.
45.6 grams of CH4 is placed into a 275 mL container at 55.00 C. The pressure is 4.72 atm.
What is partial pressure?The pressure that one of the gases in a mixture would exert if it were in the same volume on its own.
Given the mass is 45.6 grams
The volume is 275 L
Temperature is 55.00 C.
Calculate the moles
[tex]\rm Number\;of \;moles= \dfrac{mass}{molar\;mass}\\\\\rm Number\;of \;moles= \dfrac{45.6}{16.04} = 2.84 moles[/tex]
Now, calculating the pressure
PV = nRT
[tex]P\times 275 = 2.84\times 8.314\times 55 = 4.72 atm.[/tex]
Thus, the pressure inside the container in is 4.72 atm.
Learn more about pressure
https://brainly.com/question/12971272
#SPJ2
List two differences between copper and
carbon.
Answer:
Copper is a good conductor but carbon isn't
Copper has 1 valence electrons but carbon has 4 valence electrons
Explanation:
The two differences between copper and carbon is that of electronic configuration due to which copper is a metal and carbon is a non-metal.
What is electronic configuration?
Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.
Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.
Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.
Learn more about electronic configuration,here:
https://brainly.com/question/29757010
#SPJ6
When H forms a bond with H2O to form the hydronium ion H3O , this bond is called a coordinate covalent bond because
Answer:
both bonding electrons come from the oxygen atom
Explanation:
A coordinate covalent bond is said to be formed when an electron pair is donated into a empty orbital of an atom from a filled orbital of another atom.
In this type of covalent bond, the shared electron pair is furnished by only one of the bonding species.
The bonding between H^+ and H2O to form H3O^+ involves donation of a lone pair of electrons on oxygen into the empty 1s orbital of H^+ hence the two bonding electrons come from oxygen. This is why the bond is called a coordinate covalent bond.
Can someone please help with these questions!! I would really appreciate it
Answer: water
Explanation: those elements all react to water , so the answer would be water . :)
Suggest whether potassium metal can be used to react with an acid to prepare a soluble salt. Explain your answer.
Yes, potassium metal can be used to react with an acid to prepare a soluble salt.
Acids react with metals to yield the corresponding metal salt and hydrogen gas.
One of the properties of metals is their ability to react with dilute acids to yield a soluble salt and hydrogen gas. This is a common reaction for all metals that are above hydrogen in the activity series.
Potassium can react with a hypothetical acid HB as follows;
2K(s) + 2HB(aq) ------> 2KB(aq) + H2(g)
https://brainly.com/question/6136372
Calculate the mass of an object that has a density of 3.52g/cm^3 and
a volume of 5000 cm^3. Note that Mass = Volume X Density
Answer:
17.6kg
Explanation:
mass = Volume × Density
mass = 5000cm^3 × 3.52g/cm^3
mass = 17600g = 17.6kg
Please hurry Which of the following statements is true?
• A positively charged atom has more electrons than protons.
• A positively charged atom has more protons than neutrons.
• A positively charged atom has more neutrons than protons.
• A positively charged atom has no electrons.
• A positively charged atom has more protons than electrons.
Answer:
E, answer 5, A positively charged atom has more protons than electrons.
Explanation:
The ionization energies required to remove successive electrons from one mole of calcium atoms are 590 kJ/mol, 1145 kJ/mol, 4912 kJ/mol, and 6474 kJ/mol. The most common ion of calcium is probably
Answer:
Ca^2+
Explanation:
As we know, more energy is required to remove an electron from a positively charged ion than is required to remove an electron from a neutral atom. Hence, the second ionization energy of calcium is greater than its first ionization energy.
However, the third and fourth ionization energies of calcium are much higher than the second ionization energy because they involve removal of electrons from an inner filed shell. This process requires a lot of energy and is often not feasible.
Hence, the most common ion of calcium must be Ca^2+ where only two electrons are removed from calcium.
The atmospheric pressure on Stevens pass was measure to be 589mmHg. What is the pressure in atm
Answer:
The pressure is equal to 0.775 atm.
Explanation:
Given that,
The atmospheric pressure on Stevens pass was measure to be 589mmHg.
We need to find the pressure in atm.
We know that,
1 standard atmosphere = 760 mm Hg
1 mm Hg = (1/760) standard atmosphere
589 mm Hg = (1/760)× 589 standard atmosphere
= 0.775 standard atmosphere
Hence, the pressure is equal to 0.775 atm.
5.) If 6 moles of Oxygen Gas (O2) are produced in the reaction below, how
many grams of Potassium Chloride (KCI) are also produced? *
2 KCIO3 → 2 KCI + 3 O2
Answer:
im really sorry but i dont no☹
The volume of a gas decreases to half of its original volume, but the gas maintains the same number of moles and temperature. According to the ideal gas law, what will most likely happen to the pressure
Can someone help me pleaseee
Answer:
D.
Explanation:
Answer
0°C
Explanation:
substance be formed in it's solid state
1.How many moles of each element are in 0.0250 mol of K 2 Cr O 4? 2. How many moles of ammonium ions are in 4.50 mol of (N H 4 ) 2 CO 3 ? With all the process to see where you get the answers please
Answer:
1. 0.0500 moles K, 0.0250 moles Cr and 0.1000 moles O.
2. 9.00 moles ammonium ions are present.
Explanation:
1. In 1mol of K2CrO4 there are 2 moles of K, 1 mole of Cr and 4 moles of O.
The moles in 0.0250 moles K2CrO4 are:
0.0250mol * 2 = 0.0500 moles K
0.0250mol * 1 = 0.0250 moles Cr
0.0250mol * 4 = 0.1000 moles O
2. In 1 mole of (NH4)2CO3 there are 2 moles of ammonium ions, NH₄⁺.
In 4,50 moles are:
4.50 moles * 2 = 9.00 moles ammonium ions are present