Answer:
First, you distribute 2(2x-1/2)
2(2x) and 2(-1/2)
Now, you have 3x-2=4x-1
Then, you move 2 to the right side by adding so you can cancel it out.
Then, you move 4x to the left side by doing the same thing with 2
Now, divide both sides by -1
The answer is C, z= -1.
3x-2=2(2x-1/2)
3x-2=4x-1
3x=4x+1
-x=1
-x/-1 = 1/-1
= x=-1
pleas help meeeeee thank
you
Answer:
angle "E" =70°
Step-by-step explanation:
<ABC=<ADC
<ADC=<EAD (alternate angles)
<EAD=<DEA (because /DA/=/DE/
and <DEA=angle E, therefore answer=70°
The value of which of these expressions is closest to e?
The expression (1 + 1 / 18)¹⁸ represents the number closest to irrational number e. (Correct choice: A)
What exact value is closest to irrational value e?
This problem ask us to determine what expression is closest to irrational number e. A number is irrational when it cannot be represented by numbers of the form m / n, where m and n are integers and n is non-zero. The number e can be defined by the following limit:
[tex]e = \lim_{x \to \infty} \left(1 + \frac{1}x}\right)^{x}[/tex], where x is a natural number.
According to this definition, the greater the value of x is, the closer the result to irrational number e is. Therefore, the following expression is closest to the given irrational number:
x = 18
e = (1 + 1 / 18)¹⁸
To learn more on irrational numbers: https://brainly.com/question/2197288
#SPJ1
If AB=7x-4 and CB=6x what’s length of chord AC
48 is length of chord AC.
How is a chord defined?
Three or more notes come together to form a chord. A single note, referred to as the root, serves as the foundation for chords. Triads will be covered in this lesson.
A root, third, and fifth are used to make them. A line segment connecting two locations on the circle's circumference is what is referred to as the chord of a circle. The diameter, which runs through the centre of the circle, is the lengthiest chord of the circle.
since OD intersects AB to form a right angle at point B, so it bisects the chord AC.
so AB = BC (1)
given AB = 7x - 4
and CB = 6x
from (1) we have
7x - 4 = 6x
x = 4
so AB = 7(4) - 4 = 24
CB = 6(4) = 24
length of chord AC = AB + BC = 24 + 24 = 48
Learn more about chord
brainly.com/question/8944240
#SPJ1
The complete question is -
Segment OD intersects AB to form a right angle at point B.
If AB = 7x - 4 and CB = 6x, what is the length of the chord AC?
The difference of -12 - 45 will be?? postive or negitive or equle
Answer:33
Step-by-step explanation:45-12=33
DUE TOMORROW PLEASE HELP AND DONT TRY TO ANSWER WRONG TO GET POINTS PLEASE!!!!!!!!!!!!!!!
At a certain time, the end of the minute hand of the clock below centered at (0, 0) has coordinates approximately (7.5, 7.5). How long is the minute hand of the clock if each grid square is one inch by one inch? Explain your reasoning
The length of the minute hand of the clock is given as follows:
10.6 inches.
How to calculate the distance between two points?Suppose that we have two points of the coordinate plane, and the ordered pairs have coordinates [tex](x_1,y_1)[/tex] and [tex](x_2,y_2)[/tex].
The shortest distance between them is given by the equation presented as follows, derived from the Pythagorean Theorem:
[tex]D = \sqrt{(x_2-x_1)^2+(y_2-y_1)^2}[/tex]
The ordered pairs for this problem are given as follows:
(0,0) and (7.5, 7.5).
Hence the distance between the two points, representing the length of the minute hand, is given as follows:
d = sqrt(7.5² + 7.5²)
d = 10.6 inches.
More can be learned about the distance between two points at https://brainly.com/question/7243416
#SPJ1
a pizza that is 12 in diameter is cut into six slices. find the length of each arc intercepted by each slice (length of the crust). find the area of each slice.
The length of each arc intercepted by each slice is 2.09 inches.
The area of each slice 18.85 square inches .
To find the length of each arc intercepted by each slice and the area of each slice of a pizza that is 12 inches in diameter, follow the steps below. Length of each arc intercepted by each slice
The formula to find the length of each arc is given by:
L = θ/360 * 2πr
WhereL = length of arc
θ = angle of arc in degrees
r = radius of circle (diameter/2)
Given, diameter of pizza = 12 inches
So, radius of pizza = 12/2 = 6 inches
Since the pizza is cut into 6 equal slices, each slice will have an angle of 360/6 = 60 degrees.
Now, substituting the given values in the formula:
L = 60/360 * 2π* 6L = 1/6 * 12πL = 2π/3 ≈ 2.09 inches
The formula to find the area of each slice is given by:
A = θ/360 * πr²
Given, diameter of pizza = 12 inches
So, radius of pizza = 12/2 = 6 inches
Since the pizza is cut into 6 equal slices, each slice will have an angle of 360/6 = 60 degrees.
Now, substituting the given values in the formula:
A = 60/360 * π* 6²A = 1/6 * 36π
A = 6π ≈ 18.85 square inches
Thus, the length of each arc intercepted by each slice is approximately 2.09 inches and the area of each slice is approximately 18.85 square inches.
You can learn more about circular area at
https://brainly.com/question/10645610
#SPJ11
Identify the area of the polygon with vertices P(1,2), Q(1,4), R(-1,6), and S(-3,2).
A = 16 units²
A= 10 units²
A= 6 units²
A = 14 units²
The area of the polygon with vertices P(1,2), Q(1,4), R(-1,6), and S(-3,2) is given as 10 units. Option B
How to find the areaWe can find the area of the polygon with the given vertices by dividing it into triangles and adding their areas.
One way to divide the polygon into triangles is to draw a diagonal from vertex P to vertex R. This creates two triangles, PQR and PRS.
[tex]\frac{1 }{2} ((4 - 2) + (6--4) + (-2 - - 18) + (-6 - 2)[/tex]
= 1 / 2 ( 2 + `10 + 16 - 8)
= 1 / 2 ( 20
= 10
The area of the polygon is 10 units
Read more on polygons here:https://brainly.com/question/1592456
#SPJ1
about 4% of the population has a particular genetic mutation. 1000 people are randomly selected. find the standard deviation for the number of people with the genetic mutation in such groups of 1000.
The standard deviation for the number of people with the genetic mutation in a group of 1000 individuals is approximately 4.89.
To find the standard deviation for the number of people with a particular genetic mutation in a group of 1000 individuals, we first need to understand the concept of binomial distribution.
Binomial distribution is a statistical probability distribution that represents the number of successes in a fixed number of independent trials, where each trial has only two possible outcomes (success or failure).
In this case, the probability of success (having the genetic mutation) is 0.04, and the probability of failure (not having the mutation) is 0.96. Thus, we can model the number of people with the mutation in a group of 1000 individuals using a binomial distribution with n = 1000 and p = 0.04.
The formula for the standard deviation of a binomial distribution is:
σ = √(np(1-p))
Where σ is the standard deviation, n is the number of trials, and p is the probability of success. Plugging in the values, we get:
σ = √(1000 x 0.04 x 0.96) = 4.89
In other words, we can expect that the number of people with the genetic mutation in a group of 1000 individuals will vary around the mean of 40 (1000 x 0.04) by about 4.89, with about 68% of the observations falling within one standard deviation of the mean.
To learn more about standard deviation click on,
https://brainly.com/question/13802447
#SPJ4
Determining the top three winners in a Science Quiz Bee Forming lines from six given points with no three of which are
The nature of formula (Permutations or Combinations) for each scenario is the following:
1) Permutations ; 2) Combination
3) Combination ; 4) Permutations
5)Permutations ; 6)Combination
7) Combination ; 8)Combination 9)Combination ; 10)Combination.
Permutations formula: Permutation is considered an ordered combination. The general formula for this is,
P(n, r) = n! /(n-r)!
Combination formula: It is considered arrangement ways but without ordered combination. The general formula for this is C(n, r) = n!/ (n-r)! r!
Now, we have provide some situations and we have to resolve them.
1) Determining the top three winners ing Science Quiz have to Bee is an example of Permutation as here we just arrange the position for top winners.
2) Forming lines from six given points with no three of which are collinear, is an example of combination because only pair of points is needed.
3) It will be a combination as here we select 3 points to make a triangle user.
4) Four people posing for pictures is an example of Permutation as oder does not matter.
5) Assembling a jigsaw puzzle is an example of Permutations.
6) As here we choose 2 household chores so it is a combination.
7) Selecting 5 basketball players out of 10 team members for the different positions members it is a combination.
8) Choosing three friend for birthday party is combination formula.
9) Picking 6 balls from a basket by 12 balls is combination formula.
10) Forming a committe of 5 members from do people 20 combinations people.
For more information about permutations and combinations, visit :
https://brainly.com/question/29594894
#SPJ4
Complete question:
P- Permutations or C- Combinations.
1. Determining the top three winners in a Science Quiz Bee
2. Forming lines from six given points with no three of which are collinear
3. Forming triangles from 7 given points with no three of which are collinear
4. Four people posing for pictures
5. Assembling a jigsaw puzzle
6. Choosing 2 household chores to do before dinner
7. Selecting 5 basketball players out of 10 team members for the different positions
8. Choosing three of your classmates to attend your party
9. Picking 6 balls from a basket of 12 balls
10. Forming a committee of 5 members from 20 people
Select the correct answer. Simon used these steps to solve an equation: Step 1: -6(x + 7) = 2(x − 11) Step 2: -6x − 42 = 2x − 22 Step 3: -8x − 42 = -22 Step 4: -8x = 20 Which property did he use to get from step 3 to step 4? A. addition property of equality B. distributive property C. subtraction property of equality D. transitive property
Answer: A - addition property of equality
Explanation: because -8x - 42 = -22
+42 +42
____________
-8x = 20
__ __
-8 -8
x = -2.5
what conditions does the function f(x) have to meet in order to be able to use the integral test to verify convergence or divergence?
The conditions does the function f(x) to meet in order to be able to use the integral test to verify convergence or divergence is
1) f(x) must be continuous, positive, and decreasing for all x greater than some fixed value N.
2) The series to be tested must have non-negative terms.
3) The integral of f(x) from N to infinity must converge or diverge.
To use the integral test to verify the convergence or divergence of an infinite series, the following conditions must be met for the function f(x)
1) f(x) must be continuous, positive, and decreasing for all x greater than some fixed value N.
2) The series to be tested must have non-negative terms.
3) The integral of f(x) from N to infinity must converge or diverge.
If these conditions are met, then the integral test can be used to determine whether the series converges or diverges. Specifically, if the integral of f(x) converges, then the series converges. On the other hand, if the integral of f(x) diverges, then the series also diverges.
Learn more about integral test here
brainly.com/question/28157842
#SPJ4
Near Pittsburgh, a cable car transports people from the Monongahela River valley to the community on top of the overlooking bluff. The Monongahela Incline has a grade of 78%. Find the measure of the angle the cable car track makes. with the valley floor. If necessary, round to the nearest degree.
The measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.
What is grade?The slope or inclination of a line or surface is sometimes referred to as the grade in mathematics. The ratio of the vertical change (rise) to the horizontal change (run) between any two locations on a line or surface is what is meant by this term. Usually, the grade is given as a percentage or a fraction. In engineering, building, and transportation, grades are frequently used to define the slope of roads, railroads, and other infrastructure. The grade, which refers to how steep the slope is when referring to a cable car, is a crucial element in determining the safety and effectiveness of the system.
To find the angle we use the trigonometric functions:
tan(θ) = grade = rise/run
Given that, the grade of the incline is 78%, then grade = 0.78.
θ = arctan(0.78) ≈ 38.7 degrees.
Hence, the measure of the angle the cable car track makes with the valley floor is approximately 38.7 degrees.
Learn more about grade here:
https://brainly.com/question/29150359
#SPJ1
Locate each of the stations on the accompanying map of California. Us a compass to drawa circle centered on each city station with a radius corresponding to the distance determined to the epicenter from that station. The horizontal scale in kilometers is provided on the map
To locate the stations and draw cirradius cles on the map of California, follow these steps:
1. Identify the city stations on the map: Find the city stations indicated on the map, such as San Francisco, Los Angeles, and San Diego.
2. Use a compass: Set your compass to the scale provided on the map.
For example, if the scale says 1 inch = 100 km, adjust your compass accordingly.
3. Determine the distance from the epicenter: Based on the information provided, determine the distance from each city station to the epicenter. If it is not provided, refer to additional resources or data.
4. Draw the circles: Place the compass point on each city station and draw a circle with a corresponding to the distance determined in
step 3. Ensure the radius is in scale with the map.
5. Identify the epicenter: The point where all the circles intersect is the approximate location of the epicenter.
for such more questions on radius
https://brainly.com/question/24375372
#SPJ11
Find the X
geometry
pt.2
The angle of x in the given circle is 51 degrees.
What is theorem of secant and tangent line in circle?In the case when a tangent line and a secant line originate from the same external point, the mean of the exterior angle is equal to half the difference between the major arc and the minor arc that are created by the tangent and secant lines.
From the given figure we observe that the secant line and tangent line start from the same exterior angle.
Thus, according to the theorem of secant and tangent line of circle we have:
angle x = (DA - DB) /2
angle x = (178 - 76) / 2
angle x = 102 /2
angle x = 51 degrees.
Hence, the angle of x in the given circle is 51 degrees.
Learn more about secant line here:
https://brainly.com/question/30162653
#SPJ1
Gillian spends a third of her pocket money on snacks and a quarter of it on bus fare. How much money did she remain with?
Gillian pocket money is x, then Gillian has [tex]5/12x[/tex]left after spending on snacks and bus fare.
How to find the spending ?The term "spending" refers to the act of spending money to buy goods or services. It is the act of exchanging money for something, usually a product, service, or experience. Buying groceries, paying for transportation, or purchasing clothing are all examples of spending. To avoid debt and achieve your financial goals, it is critical to manage your spending wisely in personal finance.
If Gillian spends one-third of her pocket money on snacks and one-quarter on bus fare, she spends 7/12 of her pocket money on snacks and bus fare.
This means she only has [tex]1 - 7/12 = 5/12[/tex] of her pocket money remaining.
As a result, if her pocket money is x, she has 5/12x left after paying for snacks and bus fare.
To know more about product visit:-
https://brainly.com/question/29652804
#SPJ9
SOMEONE PLEASE DO THIS FOR ME I WILL SELL MY SOUL AND A BUNCH OF THE LITTE POINT THINGS
Answer: SORRY THIS TOOK FOREVER ITS SO HARD- THE ANSWER IS F, C, D, H, E, A, G, B!!!
Step-by-step explanation:
THE LEAST TO GREATEST ARE F, C, D, H, E, A, G, B! HOPE IT HELPED!! :D
which of the following is not a characteristic of the normal probability distribution? 99.72% of the time the random variable assumes a value within plus or minus 1 standard deviation of its mean.
The false statement regarding the normal distribution is given as follows:
99.72% of the time the random variable assumes a value within plus or minus 1 standard deviation of its mean.
How to obtain probabilities using the normal distribution?The z-score of a measure X of a normally distributed variable that has mean represented by [tex]\mu[/tex] and standard deviation represented by [tex]\sigma[/tex] is obtained by the equation presented as follows:
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
The z-score represents how many standard deviations the measure X is above or below the mean of the distribution of the data-set, depending if the obtained z-score is positive(above the mean) or negative(below the mean).The z-score table is used to obtain the p-value of the z-score, and it represents the percentile of the measure X in the distribution.The percentage of scores within 1 standard deviation of the mean is obtained considering that:
The p-value of Z = 1 is of 0.8413.The p-value of Z = -1 is of 0.1587.Hence the percentage is given as follows:
84.13 - 15.87 = 68.26%, which is different of 99.72%.
More can be learned about the normal distribution at https://brainly.com/question/25800303
#SPJ1
The correct answer is that all of the following are characteristics of the normal probability distribution as given below.
What is a probability?A subfield of statistics known as probability studies random events and their likelihood of happening.
The statement "99.72% of the time the random variable assumes a value within plus or minus 1 standard deviation of its mean" is actually a characteristic of the normal probability distribution.
The correct answer is that all of the following are characteristics of the normal probability distribution:
It is a continuous probability distribution, which means that it can take on any value within a certain range.It is symmetric around its mean.It is described by two parameters: its mean and standard deviation.The area under the curve of the probability density function is equal to 1.A large proportion (68.27%) of the data falls within one standard deviation of the mean, an even larger proportion (95.45%) falls within two standard deviations of the mean, and an even larger proportion (99.73%) falls within three standard deviations of the mean.To know more about probability, visit:
https://brainly.com/question/13604758
#SPJ1
w(x)= -5(x-8)(x+4)
What is the maximum height that the stone will reach?
Answer:
(2, 180)
Step-by-step explanation:
w(x)=-5x^2+20x+160
a=-5 b=20
x=-20/2x(-5)
x=2
w(2)=180
2, 180
Assume that Canada imports more goods and services than it exports. Which of the following is true of the Canadian balance of payments accounts??
The correct answer is C. Could you please explain in detail why the trade balance must be negative, and why A and E is wrong. Thx!!!25. Assume that Canada imports more goods and services than it exports. Which of the following is true of the Canadian balance of payments accounts? (A) The current account balance must be negative. (B) The current account balance must be positive (C) The trade balance must be negative. (D) The financial account (formerly called capital account) balance must be negative (E) The financial account (formerly called capital account) balance must be positive
The trade balance must be negative.
If Canada imports more goods and services than it exports, the trade balance must be negative.
Here's a step-by-step explanation of why this is true and why options A and E are wrong:
1. The trade balance is calculated as the value of exports minus the value of imports. If imports are greater than exports, the trade balance will be negative (C). This m that Canada is seen spending more on goods and services from other countries than it is receiving from the sale of its own goods and services to other countries.
2. The current account balance includes the trade balance, but also considers other transactions such as income from investments and transfers like foreign aid. While it is possible that a negative trade balance could be offset by other positive inflows, we do not have enough information to determine whether the current account balance must be negative (A) or positive (B). Therefore, we cannot definitively say that A or B is true.
3. The financial account (formerly called capital account) balance records the net change in ownership of financial assets, such as stocks and bonds, between a country and the rest of the world. A negative financial account balance means that a country's residents are purchasing more foreign assets than foreign residents are purchasing of that country's assets. A positive financial account balance means the opposite. Since we only have information about the trade balance and not the financial transactions, we cannot determine whether the financial account balance must be negative (D) or positive (E).
Based on the information given, we can only conclude that the trade balance must be negative (C) if Canada imports more goods and services than it exports.
To know more about trading:
https://brainly.com/question/8322028
#SPJ11
If AD = 28 and DB = 45, which is the exact
circumference of Circle C?
The circumference of Circle C is found as 53π.
Define about the circumference of Circle?The circumference of a circle is the distance encircling its edge. The diameter of a circle is the distance measured through its center. The radius of a circle is the distance from the center to any point on the edge.In the given figure:
AD = 28 and DB = 45
∠ADB = 1/2 *∠ACB
∠ADB = 90
Applying Pythagorean theorem in ΔABD.
AB² = AD² + DB²
AB² = 28² + 45²
AB = √2809
AB = 53
Radius = 53/2
circumference of Circle C:
C = 2πr
C = 2*π* (53/2)
C = 53π
Thus, the circumference of Circle C is found as 53π.
know more about the circumference of Circle
https://brainly.com/question/23986334
#SPJ1
Determine the equation of the circle graphed below.
Answer:
Step-by-step explanation:
Circle centre: (4,7)
Radius: 3
Equation is:
[tex](x-h)^2+(y-k)^2=r^2[/tex] (where (h,k) is center, r is radius)
[tex](x-4)^2+(y-7)^2=3^2[/tex]
[tex](x-4)^2+(y-7)^2=9[/tex] (This is the general standard form )
in expanded form,
[tex](x^2-8x+16)+(y^2-14y+49)=9[/tex]
[tex]x^2+y^2-8x-14y+56=0[/tex]
Note: Unless stated either form is an acceptable answer.
What is the exact value of sin(cos^-1 (√2/2)) + tan^-1 (sin(π/2))
[tex]\qquad \qquad \textit{Inverse Trigonometric Identities} \\\\ \begin{array}{cccl} Function&Domain&Range\\[-0.5em] \hrulefill&\hrulefill&\hrulefill\\ y=cos^{-1}(\theta)&-1 ~\le~ \theta ~\le~ 1& 0 ~\le~ y ~\le~ \pi \\\\ y=tan^{-1}(\theta)&-\infty ~\le~ \theta ~\le~ +\infty &-\frac{\pi}{2} ~\le~ y ~\le~ \frac{\pi}{2} \end{array} \\\\[-0.35em] ~\dotfill[/tex]
[tex]cos^{-1}\left( -\cfrac{\sqrt{2}}{2} \right)\implies \theta \hspace{5em}\stackrel{\textit{so we can say}}{cos(\theta )=-\cfrac{\sqrt{2}}{2}} \\\\\\ \theta =cos^{-1}\left( -\cfrac{\sqrt{2}}{2} \right)\implies \stackrel{ \textit{on the II Quadrant} }{\theta =\cfrac{3\pi }{4}} \\\\[-0.35em] ~\dotfill\\\\ sin\left[ cos^{-1}\left( -\cfrac{\sqrt{2}}{2} \right) \right]\implies sin\left( \cfrac{3\pi }{4} \right)\implies \boxed{\cfrac{\sqrt{2}}{2}}[/tex]
now let's find the angle for the inverse tangent
[tex]sin\left( \cfrac{\pi }{2} \right)\implies 1\hspace{5em}\stackrel{\textit{so we can say}}{tan^{-1}\left[ sin\left( \frac{\pi }{2} \right) \right]}\implies tan^{-1}(1) \stackrel{ \textit{on the I Quadrant} }{\implies\boxed{\cfrac{\pi }{4}}} \\\\[-0.35em] \rule{34em}{0.25pt}\\\\ sin\left[ cos^{-1}\left( -\frac{\sqrt{2}}{2} \right) \right]~~ + ~~tan^{-1}\left[ sin\left( \frac{\pi }{2} \right) \right]\implies \cfrac{\sqrt{2}}{2}~~ + ~~\cfrac{\pi }{4} \implies \boxed{\cfrac{2\sqrt{2}+\pi }{4}}[/tex]
for the sine function we end up in the II Quadrant because the inverse cosine function range is constrained to the I and II Quadrants only, so our angle comes from that range.
Likewise, our angle from the inverse tangent comes from the I Quadrant, because inverse tangent range is only I and IV Quadrants.
A,B and c lie on a straight line segment A , E and d lie on a straight line segment AB = 5cm AC= 30cm and EB = 4cm work out the length of dDC
The length of dDC is 16 cm. We can use the similarity of triangles ACD and ABE to find the length of DC.
We know A,B and c lie on a straight line segment A , E and d lie on a straight line segment
AC/AB = AD/AESubstituting the given values, we get:
30/5 = AD/(AD+4)Simplifying the equation, we get:
AD = 20
Now, we can use the similarity of triangles ACD and ABE again, to find the length of DC.
CD/BE = AD/AE
Substituting the values, we get:
CD/4 = 20/(20+5)
Simplifying the equation, we get:
CD = 16
Therefore, the length of dDC is 16 cm.
Learn more about straight-line segment
https://brainly.com/question/28669800
#SPJ4
Priya has a recipe for banana bread. She uses 7 1/2 cups of flour to make 3 loaves of banana bread. Andre will follow the same recipe. He will make b loaves of banana bread using f cups of flour. Which of these equations represents the relationship between b and f?
Answer:
Step-by-step explanation:
asdf
The diameter of a softball is 3.8 inches. Estimate the volume within the softball. Round answers to the nearest
whole number and leave in the answer.
a. Volume: 73
b. Volume: 14
c. Volume: 9
d. Volume: 58
The volume of the ball is 9π (optionC)
What is volume of a sphere?A sphere is symmetrical, round in shape. It is a three dimensional solid, that has all its surface points at equal distances from the center.
The ball takes the shape of the sphere. The volume of a sphere is therefore calculated as ;
V = 4/3 πr³
r = d/2 = 3.8/2 = 1.9
V = 4/3 × π × 1.9³
V = 27.44 π/3
V = 9π ( nearest whole number)
therefore the volume of the ball is 9π (nearest whole number)
learn more about volume of a sphere from
https://brainly.com/question/10171109
#SPJ1
Two landing points, A and B, lie on the straight bank of a river and are separated by 50 meters. Find the distance from each landing point to a boat pulled ashore on the opposite bank at a point C if
The distance from each landing point to the boat pulled ashore at point C is given by:-d = sqrt(25^2 (y^2/x^2 + 1))
WHAT IS TRIGONOMETRY ?
Trigonometry is a branch of mathematics that deals with the study of the relationships between the sides and angles of triangles. It is used to solve problems involving distances, heights, angles, and other geometric measurements. Trigonometric functions such as sine, cosine, and tangent are used to relate the angles of a triangle to its sides. Trigonometry has many practical applications in fields such as engineering, physics, and architecture, and is essential for understanding and solving problems involving waves, oscillations, and periodic phenomena. It is also used in navigation, surveying, and astronomy, among other areas.
To solve this problem, we need to use the concept of right triangle trigonometry.
Let's assume that point C is directly opposite the midpoint of AB, and that the distance from point C to the midpoint of AB is x. Then we can draw a right triangle with legs of length x and 25 (half of 50) and a hypotenuse of length d (the distance from point C to each landing point).
Using the Pythagorean theorem, we can write:
d^2 = x^2 + 25^2
We also know that the angles opposite the legs of the right triangle are complementary, so we can use the tangent function to write:
tan(theta) = x/25
where theta is the angle between the hypotenuse and the side of length 25.
We can rearrange this equation to solve for x:
x = 25 tan(theta)
Now we can substitute this expression for x into the equation for d^2:
d^2 = (25 tan(theta))^2 + 25^2
Simplifying this equation, we get:
d^2 = 25^2 (tan^2(theta) + 1)
Finally, we can use the fact that tan(theta) is equal to the height of the opposite bank divided by the distance from point C to the midpoint of AB. Let's call this distance y. Then we have:
tan(theta) = y/x
Substituting this expression for tan(theta) into the equation for d^2, we get:
d^2 = 25^2 (y^2/x^2 + 1)
So the distance from each landing point to the boat pulled ashore at point C is given by:
d = sqrt(25^2 (y^2/x^2 + 1))
where x and y are the distances from point C to the midpoint of AB and the opposite bank, respectively.
To know more about Trigonometry visit :-
https://brainly.com/question/13729598
#SPJ1
a pwr core contains about 50000 fuel rods. if the probability to find one defective fuel rod is 0.1%, what is the probability to find 10 defective cores
The probability of finding 10 defective cores in a sample of 10 power cores is approximately 0.0000161, or about 0.0016%.
Assuming that each fuel rod is independent of each other and that the probability of finding a defective fuel rod is constant at 0.1%, we can model the number of defective fuel rods in a power core with a binomial distribution. Let X be the number of defective fuel rods in one power core, then X follows a binomial distribution with parameters n = 50000 and p = 0.1/100 = 0.001.
To find the probability of finding 10 defective cores, we can use the binomial distribution again, but with a different set of parameters. Let Y be the number of defective cores in a sample of 10 power cores, then Y follows a binomial distribution with parameters n = 10 and p = P(X ≥ 1), where P(X ≥ 1) is the probability of finding at least one defective fuel rod in one power core. We can find P(X ≥ 1) using the complement rule:
P(X ≥ 1) = 1 - P(X = 0)
= 1 - (1 - 0.001)^50000
≈ 0.3935
So, the probability of finding 10 defective cores in a sample of 10 power cores is:
P(Y = 10) = (10 choose 10) * (0.3935)^10 * (1 - 0.3935)^(10 - 10)
≈ 0.0000161
Learn more about Probability at:
brainly.com/question/24756209
#SPJ4
Complete Question:
a power core contains about 50000 fuel rods. if the probability to find one defective fuel rod is 0.1%, what is the probability to find 10 defective cores.
Help pls!
A scale drawing of a famous statue uses a scale factor of 250:1. If the height of the drawing is 1.2 feet, what is the actual height of the statue?
O248.8 feet
O 250 feet
O251.2 feet
300 feet
In linear equation, The actual height of the statue is 300 feet.
What in mathematics is a linear equation?
An algebraic equation with simply a constant and a first-order (linear) term, such as y=mx+b, where m is the slope and b is the y-intercept, is known as a linear equation. Sometimes, the aforementioned is referred to as a "linear equation of two variables," where x and y are the variables.
Equations with variables of power 1 are referred to as linear equations. One example with only one variable is where ax+b = 0, where a and b are real values and x is the variable.
A scale factor of a famous statue uses a scale factor of 250:1. If the height of the drawing is 1.2 feet, what is the actual height of the statue?
= 1.2 x 250
The actual height of the statue is 300 feet.
Learn more about linear equation
brainly.com/question/11897796
#SPJ1
Answer:(D) 300
Step-by-step explanation: the scale factor is 250:1 and the Hight of the drawing is 1.2 feet you need to multiply 1.2 by 250
1.2 x 250 = 300
12. STEM An engineer is designing solar
panels for a rover that will explore
Mars. The solar panel unfolds to an
isosceles trapezoid. The length of
one leg is 0.1.x -0.5 meters, and the
length of the other leg is 0.3.x-2.1
meters. What is the length of each of
the legs of the solar panel?
Answer:
Step-by-step explanation:
Let's call the length of the shorter leg of the isosceles trapezoid "a" and the length of the longer leg "b".
From the problem, we know that:
a = 0.1x - 0.5 (length of one leg is 0.1.x - 0.5 meters)
b = 0.3x - 2.1 (length of the other leg is 0.3.x-2.1 meters)
Since we know that the trapezoid is isosceles, we know that a = b. So we can set the two expressions equal to each other:
0.1x - 0.5 = 0.3x - 2.1
Now we can solve for x:
0.2x = 1.6
x = 8
Now that we know x, we can substitute it back into the expressions for a and b to find their lengths:
a = 0.1(8) - 0.5 = 0.3 meters
b = 0.3(8) - 2.1 = 0.3 meters
Therefore, each of the legs of the solar panel are 0.3 meters long.
Can someone tell me the answer to this question is please?
Each student should receive 1/2 kg of soil.
How to distribute same amount of soil?To find out how much soil each student will have, we need to first add up the total amount of soil collected and then divide it equally among the 10 students.
Let's start by converting all the amounts of soil to a common unit, such as kilograms:
3 students brought 1/4 kg each, so they brought a total of 3/4 kg.
4 students brought 1/2 kg each, so they brought a total of 2 kg.
3 students brought 3/4 kg each, so they brought a total of 2 1/4 kg.
Adding up these amounts, we get:
3/4 + 2 + 2 1/4 = 5 kg
So the total amount of soil collected is 5 kg.
To redistribute this soil equally among the 10 students, we need to divide it by 10:
5 kg ÷ 10 = 1/2 kg per student
Therefore, each student should receive 1/2 kg of soil.
To know more about Average visit:
brainly.com/question/24057012
#SPJ1