what is the percent ionization of a monoprotic weak acid solution that is 0.181 m? the acid-dissociation (or ionization) constant, ka, of this acid is 2.32×10−11 . percent ionization

Answers

Answer 1

The percent ionization of a monoprotic weak acid solution that is 0.181 m the acid-dissociation (or ionization) constant, ka, of this acid is 2.32×10−11  is 1.13x10^-3 T%

The concentration of solution of 0.433 M.

The Ka of the acid is 2.32 x 10~

~and the solution has a concentration of 0.181T M.

We can calculate the hydronium ion concentration by using the equation: |

Ka=[H3O+][A-]/HA-][H3O+]

[H3O+]=[A-]

[H3O+]^2=Ka[HA]

[H3O+]^2= 2.32X10^-11x0.181M[H3O+]=2.049195x10^-6 M

We can then calculate the percent ionization using the equation:

Percent ionisation= [H3O+]/[HA]x100

Percent ionisation= 2.049195x10^-6 M/0.181 M=1.13x10^-3 %

The percent ionization is 1.13x10^-3 %

The percent ionization of a 0.433 M solution of the monoprotic acid is 0.00113%

To learn more about percent ionisation visit:

brainly.com/question/20658080

#SPJ4

Answer 2

The percent ionization of a monoprotic weak acid solution that is 0.181M is  0.001132%

It is given that the concentration of the monoprotic acid is 0.181M and the acid-dissociation (or ionization) constant, ka, of this acid is 2.32×10^−11.To find the percent ionization of a monoprotic weak acid solution, the following steps are to be followed,

[H+] = √Ka x C

On substituting the values of Ka and the concentration of the acid, we get

[H+] = √2.32 x10⁻¹¹ x 0.181

       = √0.4199x10⁻¹¹

[H+] = 2.049 x 10⁻⁶M

The dissociation is given by,

AH + H₂O -------> A- + H₃O⁺

[H+] = [A-] = 2.049 x 10⁻⁶M

[HA] at equilibrium is given by

= 0.181-2.049 x 10⁻⁶

=0.180997

The percentage of ionization is given by,

Percentage ionization = [H₃O⁺]/[HA] x 100

On substituting,

Percentage ionization = 2.049 x 10⁻⁶/0.181x100

                                     = 1.132 x 10⁻³%

Percentage ionization = 0.001132%

Therefore the percentage ionization is 0.001132%

To know more about monoprotic ions, click below:

https://brainly.com/question/9423068

#SPJ4


Related Questions

the electronegativity value for mg is 1.2 and the value for o is 3.5. based on these values, what type of bond is expected for a compound formed between mg and o?

Answers

The electronegativity value for mg is 1.2 and the value for O is 3.5 based on these value ionic bond is expected to be formed between mg and o.

It is crucial to understand in this type of investigation that the higher the electronegativity value, the more likely it is that an ionic connection will form between the two elements.

Therefore, to demonstrate that an ionic bond should form between two elements, we need to know the difference in their electronegativity values. This query demonstrates that the electronegativity difference is rather substantial. As a result of this important distinction, it is anticipated that an ionic bond will form. If their strengths are comparable, covalent bonds are possible.

The main interaction in ionic compounds is ionic bonding, a type of chemical bonding that involves the electrostatic attraction between two atoms or ions with sharply different electronegativities.

For more information on ionic bond kindly visit to

https://brainly.com/question/11527546

#SPJ4

7.93 mol of c5h12 reacts with excess o2, how many moles of co2 will be produced by the following combustion reaction?

Answers

The following combustion of fuel will result in the production of 39.65 moles, claims the statement.

What is a mole, exactly?

A mole is 6.02214076 x 1023 of any chemical unit, including atoms, molecules, ions, and others. Due to the high number of electrons, molecules, or other components that make up any substance, the mole is a useful measure to utilize. The mole was initially defined as the quantity of atoms contained in 12 grams of co2, but the General Assembly on Measurement and Weights declared in 2018 that the mole will only contain 6.02214076 1023 of some scientific unit as of May 20, 2019.

Briefing:

C₅H₁₂+8O₂→6H₂O+5CO₂

From the equation, we see that 1 mole of C₅H₁₂ reacts with excess of O₂ to produce 5 moles of CO₂.

So, 7.93 moles of C₅H₁₂ will react with excess O₂ to produce (7.93*5) moles = 39.65 moles.

To know more about Moles visit:

https://brainly.com/question/26416088

#SPJ4

Identify indicators of a chemical reaction. Check all of the boxes that apply.

Two clear liquids are combined. A green solid forms.

color change

absorption of heat

formation of precipitate

formation of gas
Blobs of green solid are shown in clear liquid in a test tube.

Answers

All except for absorption of heat

Answer:color change and formation of precipitate.

Explanation: The reaction of products of the chemical reaction may have different properties

The chemical properties of atoms, ions, and molecules are related to the arrangement of the _______ within them.

Answers

Answer: Protons

Explanation:

Protons is the answer because they are unchanging and cannot move compared to electrons.

A structure containing a central atom with two electron groups, designated ax2, has a _____ shape with a bond angle of _____ degrees.

Answers

A structure containing a central atom with two electron groups, designated ax2, has a linear shape with a bond angle of 180 degrees.

In a molecular formula, the center atom is often the one with the lowest subscript and the largest bonding potential. When all of the atoms typically form the same amount of bonds, the central atom is often the one with the lowest electronegative potential. Central ions are the metal ions that the ligands attach to. Example: The core ion in K3[Fe(CN)6] is Fe3+. As Lewis acids, these core atoms and ions serve as acceptors of the electron pair.

Since C is less electronegative than O, it serves as the main atom. 2. C contains four valence electrons, and each O has six, for a total of sixteen valence electrons.

Learn more about center atom here:

https://brainly.com/question/20214648

#SPJ4

the reaction for the oxidation of nh3 is given as: 4 nh3 5 o2 → 4 no 6 h2o under certain conditions the reaction will proceed at 29.8% yield of no. how many grams of nh3 must be made to react with excess oxygen to yield 70.5 g of no?

Answers

134g of NH3 is required to react with excess oxygen to make 70.5 g of NO

We need to prepare 70.5 of NO given that the percent yield is 29.8%. Therefore, the molar mass of NO is 30g/mol. Then, the number of moles of NO in 70.5g is given by,

Moles of NO = 70.5/30

Moles of NO = 2.35moles

The actual yield of NO is 2.35 moles. Then theoretical yield can be computed as follows,

The percent yield of NO=( actual yield of NO/theoretical yield of NO ) x 100

Theoretical yield of NO = (actual yield/percent yield/100)

On supplying the values we get,

Theoretical yield= 2.35/0.298

Theoretical yield = 7.88 moles

The reaction is given by

4NH₃+SO₂ ---------> 4NO + 6H₂O

4 moles of Ammonia are required to make 4 moles of NO. Then, moles of NO equals moles of NH₃ which is 7.88

Then molar mass of NH₃ = 17g/mol

Mass of NH₃ = molar mass x no of moles

Mass of NH₃ = 17x7.88

Mass of NH₃ = 134g.

Therefore 134g of NH3 is required to make 70.5g of NO.

To know more about actual yield, click below:

https://brainly.com/question/25996347

#SPJ4

which of the following aqueous solutions has the highest boiling point? question 3 options: 0.15 m nacl 0.10 m cacl2 0.15 m ba(no3)2 0.20 m nh3 0.10 m al(no3)3

Answers

Among the following given options Ba₂(NO₃)₂ has the highest boiling point.

The boiling point of a solvent increases due the addition of a solute in the solvent and it follows the formula:

ΔT = K × m × i

Where K represents the boiling point increasing constant (Depends of the solute), m is molality = molarity when solvent is water, and i is Van't Hoff factor.

This implies that the compound with the higher m × i will be the solution with the highest boiling point,

a. NaCl has i = 2 (NaCl dissociates in Na⁺ and Cl⁻ ions).

m × i = 0.15 × 2 = 0.3

b. CaCl₂; i = 3. (3 ions).

m × i = 0.10M × 3 = 0.3

c. Ba₂(NO₃)₂ dissolves in 5 ions. i = 5

m × i = 0.15 M × 5 = 0.75

d. NH₃ has i = 4:

m × i = 0.2M × 4 = 0.8

e. Al₂(NO)₃ : i = 5

m × i = 0.10 × 5 = 0.5

Hence, the m × i value of Ba₂(NO₃)₂ is highest so it has the highest melting point.

Learn more about melting points from the link given below.

https://brainly.com/question/17349942

#SPJ4

how many milliliters of a 0.900% (m/v) normal saline solution can be prepared from 2.50 g of sodium chloride, nacl ? note that mass is not technically the same as weight, but the abbreviation % (w/v) is often used interchangeably with % (m/v).

Answers

0.0225 ml of a 0.900% (m/v) normal saline solution can be prepared from 2.50 g of sodium chloride, nacl . note that mass is not technically the same as weight, but the abbreviation % (w/v) is often used interchangeably with % (m/v).

C = m/V

0.009 = m/V

0.009 = 2.5/V

V = 2.5/0.009 = 0.0225 ml

To help prevent heat cramps brought on by excessive sweating, sodium chloride is used as an electrolyte replenisher. The normal isotonic solution of sodium chloride can also be made using this medication. This medication is accessible over-the-counter.

learn more about sodium chloride here:

https://brainly.com/question/9811771

#SPJ4

Marcus Theory Intramolecular electron transfer from biphenyl radical anion across a steroid scaffold was investigated with a series of electron acceptor moieties (A). a. Draw a plot ofΔG0​vskET​b. Based on your plot, estimate the reorganization energy(λ)for this set of electron transfer reactions. Please explain your answer c. Which acceptor moieties lie in the Marcus inverted region for electron transfer? d. Acceptors 3-7 belong to a class of quinone, and important electron acceptor in biology. Draw a Lewis dot structure of5−, a one electron reduction product of 5.

Answers

Rudolph A. Marcus created the Marcus hypothesis in theoretical chemistry to explain the speeds of electron transfer processes starting in 1956.

the speed at which an electron can transfer or jump from a chemical species (referred to as the electron donor) to another (called the electron acceptor). Rudolph A. Marcus created the Marcus Hush theory (M-H theory) in 1956. It describes the foundations of redox/ electron transfer processes in terms of the rate at which an electron jumps/moves from an oxidant species (electron donor) to the reductant (electron acceptor). When the free energy is equal to the reorganisation energy and is in the opposite direction, the maximum rate constant for electron transfer occurs. Keep in mind that the reorganisation energy is positive and the free energy for a spontaneous electron transfer is negative.is favourable. In addition to the structural changes mentioned above, substitution, elimination, and isomerization reactions differ from outer sphere redox reactions in that nuclear configurations and charge distribution are always "in equilibrium" and that nuclear movements and charge shifts (charge transfer, CT) occur continuously and concertedly on the reactions path. This is demonstrated by the SN2 substitution of the saponification of an alkyl halide, where a transition state containing a five-coordinated carbon atom must be viewed and where the rear side assault of the OH ion pushes out a halide ion.

To learn more about equilibrium please click on below link

https://brainly.com/question/28527601

#SPJ4

when an alkene is subjected to treatment with hg(oac)2 in ch3oh followed by reaction with nabh4, what new class of compound is formed?

Answers

An alcohol is created when an alkene undergoes treatment with hg(oac)2 in ch3oh, followed by a reaction with nabh4.

What are the uses of alkene?

One of the most adaptable chemical building blocks, alkenes are essential to numerous synthetic reactions. Alkene reactants are used in hydro functionalization processes such olefin hydroalkoxylation and hydroamination, which is a very active area of catalysis.

Alkene vs. alkane: what are they?

Alkanes are saturated hydrocarbons because they only have one bond between the carbon atoms. Alkenes have at least one double bond between carbon atoms. Alkynes have one or more triple bonds between carbon atoms. Unsaturated hydrocarbons are the name given to alkenes and alkynes.

To know more about alkene visit:

brainly.com/question/29032376

#SPJ4

the model illustrates a process by which a substance is taken up by a cell. which statements describe the process? select the correct answer. (1 point)

Answers

By engulfing molecules, cells absorb them through the process of endocytosis. The substance to be transported is caught in a tiny, inward deformation of the plasma membrane known as an invagination.

Pinocytosis is a process by which the cell absorbs the liquids along with dissolved small molecules. Pino means "to drink" in Greek. As a result of this process, the cell membrane folds forms tiny pockets and collects the cellular fluid and other dissolved materials.

Learn more about the  molecules,

https://brainly.com/question/475709

#SPJ4

what is oxidation? what is reduction? what are the oxidation states of cu and zn (both species) in the following reaction: cu2 (aq) zn(s) → cu(s) zn2 (aq) what is oxidized? what is reduced?

Answers

Oxidation: Oxidation is the loss of electrons during a reaction by a molecule, atom or ion.

Oxidation occurs when the oxidation state of a molecule, atom or ion is increased. The opposite process is called reduction, which occurs when there is a gain of electrons or the oxidation state of an atom, molecule, or ion decreases.

Reduction: Reduction involves a half-reaction in which a chemical species decreases its oxidation number, usually by gaining electrons. The other half of the reaction involves oxidation, in which electrons are lost. Together, reduction and oxidation form redox reactions (reduction-oxidation = redox). Reduction may be considered the opposite process of oxidation.

Cu(aq) + Zn(s) = Cu (s) + Zn2+ ( aq)

(2+)        (0)              ( 0)   (2+)

In this reaction, Zn is oxidised and Cu is reduced.

What do you mean by redox reaction?

Redox reactions are oxidation-reduction chemical reactions in which the reactants undergo a change in their oxidation states. The term ‘redox’ is a short form of reduction-oxidation. All the redox reactions can be broken down into two different processes – a reduction process and an oxidation process.

The oxidation and reduction reactions always occur simultaneously in redox or Oxidation-Reduction reactions. The substance getting reduced in a chemical reaction is known as the oxidizing agent, while a substance that is getting oxidized is known as the reducing agent.

To know more about redox reaction from the given link:

https://brainly.com/question/8493642

#SPJ4

what volume (ml) of the sweetened tea described in example 3.14 contains the same amount of sugar (mol) as 10 ml of the soft drink in this example?

Answers

0.75 volume (ml) of the sweetened tea described in example 3.14 contains the same amount of sugar (mol) as 10 ml of the soft drink in this example

It is given that the concentration of sugar in a soft drink is 0.375M It means 1L of soft drinks contains 0.375mol of sugar. Then,

1000mL = 0.375mol

1mL =0.375/1000

For 10ml

= 0.375 x 10^-3 x 10

= 0.00375mol sugar

Now, the concentration of sugar in sweetened tea is 0.05M.

This means 12 L solution (tea) contains 0.05mol of sugar.

Now, we need to find the volume of sweetened tea that has the same mass of sugar that is present in 10ml of soft drink

So, the required amount of sugar  is 0.05 mol

0.05mol sugar = 1000ml (tea)

1 mol sugar = 1000/0.05 (tea)

So,

0.00375 mol sugar = (1000x 0.00375)/0.05

= 75.0 mL (tea)

The volume of tea required is 0.75ml

To know more about carbonate drinks, click below:

https://brainly.com/question/24848856

#SPJ4

salicylic acid was your limiting reagent, and it has a molecular weight of 138.12g/mol. aspirin, your product, has a molecular weight of 180.15 g/mol. what was your percent yield?

Answers

Your limiting agent, salicylic acid, has a molar mass of 138.12 g/mol. Your product, aspirin, does have an molecular weight average of 180.15 g/mol. Methyl salicylate volume = 0.259 mL

What alters the skin does salicylic acid?

Salicylic acid applied topically heals acne by bringing down redness and swelling and clearing clogged skin pores to encourage pimples to contract. By softer and looserning dry, scaly, or thicker skin so that it slips off or is removed easily, it addresses other skin disorders.

Briefing

mass = number of moles * molar mass

molecular weight of methyl salicylate is 152.1 g/mol

number of moles = 2 mmol = 0.002 moles

mass = 0.002 moles * 152.1 g/mol

mass of methyl salicylate = 0.3042 g

Volume is determined from the density and mass

Volume = mass/density

volume of methyl salicylate = 0.3042 g/ 1.174 g/ml

volume of methyl salicylate = 0.259 mL

To know more about salicylate visit:

https://brainly.com/question/14635153

#SPJ4

Can anyone solve this? Thank you

Answers

There can be emissions of radiations like gamma radiation. There can be emission of particles too like alpha particle. Therefore radioactive decay of lead leads to production of bismuth. the blank can be filled with 210 and 82.

What is nuclear decay?

Nuclear decay is process in which the radioactive element releases particles or radiations. Alpha particles is ⁴₂He. Alpha particle is nothing but helium particle.

The balanced reaction can be written as

²¹⁰Pb [tex]_x[/tex] [tex]\rightarrow[/tex] 83[tex]Bi^y[/tex]   + ⁰₋₁ e

sum of mass number of reactant side=total sum of mass number of product

210=y+0

y=210

sum of atomic number of reactant side=total sum of atomic number of product

x=83+(-1)

x=83-1

x=82

Therefore radioactive decay of lead leads to production of bismuth. the blank can be filled with 210 and 82.

To know more about nuclear decay, here:

https://brainly.com/question/21114779

#SPJ1

label the energy diagram. you are currently in a labeling module. turn off browse mode or quick nav, tab to items, space or enter to pick up, tab to move, space or enter to drop.energy is plotted on the y axis versus the reaction coordinate on the x axis. the curve begins at an energy value approximately half way up the y axis. it then increases to a maximum before decreasing to a final energy that is less than the initial energy. there is a line measuring the vertical distance from the initial energy to the peak energy and a second line measuring the vertical distance from the initial energy to the final energy. answer bank

Answers

The reaction profile diagram shows the conversion of reactants to products.

What is the energy diagram?

We know that the energy diagram is the diagram that is drawn to show the interaction between species as they move from the reactants to products. We can see that in the reaction profile the energy us plotted on he vertical axis and the reaction pathway is plotted on the horizontal axis.

Now the topmost part of the curve is the activated complex. The activation energy of the reaction is the line that terminates at the curve for the reactants. The corner at the left is for the reactants while the corner at the right is for the products. The enthalpy change is the difference between the energies of the reactants and the products.

All these are shown in the reaction profile attached here.

Learn more about reaction profile  diagram:https://brainly.com/question/23528085

#SPJ1

With a pressure of 1.5 atm (atmosphere), a piston pushes in on the gas in a cylinder, compressing it from 5.1 L to 1.8 L. What is the work done on the gas (in joules)?

Answers

Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore,  the work done on the gas (in joules) is 4.95 J.

What is Enthalpy?

Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances.

Mathematically,

q = n ×ΔH

where

q = amount of heat

n = no of moles

ΔH = enthalpy

n = w / M.M

Work in thermodynamic= work done on the system =p×change in temperature

work done on the system= 1.5 atm×(5.1 L - 1.8 L. )

work done on the system=4.95 J

Therefore,  the work done on the gas (in joules) is 4.95 J.

To know more about enthalpy, here:

https://brainly.com/question/24170335

#SPJ1

A 0.50 M solution of sodium chloride in an open beaker sits on a lab bench. Which of the following would decrease the concentration of the salt solution?

Answers

Molarity of NaCl solution = 0.5 M Molarity or Concentration = Moles of solute / Volume of solution 0.5 M solutions of Sodium chloride means 0.5 moles of NaCl in 1 Litre of Sodium chloride solution.   In order to decrease the concentration of the solution more water should be added to the solution.

What is Molarity?

Molarity or molar concentration is the number of moles of solute per liter of solution, which can be calculated using the following equation:

[tex]\text{Molarity}= \dfrac{\text{mol solute}}{\text{L of solution}}[/tex]

Molar concentration can be used to convert between the mass or moles of solute and the volume of the solution.

Learn more about molarity here:

https://brainly.com/question/8732513?referrer=searchResults

#SPJ4

a sample of chlorine gas is confined in a 5.0 l container at 328 torr and 37 o c. how many moles of gas are in the sample?

Answers

The number of moles of gas in the sample is 0.0862 mol which can be calculated using ideal gas law.

An ideal gas is one that follows all the gas laws at every temperature and pressure condition. A real gas is referred to as a gas that does not act like an ideal gas.

From ideal gas equation, it is stated that

PV=nRT

Here, P represents the pressure of gas, V represents the volume of the gas, T represents the temperature, R is the gas constant and n is the number of moles.

It is given that, Volume of gas is 5.0 L, Pressure is 328 torr and the temperature is 37°C. The number of moles can be calculated as follows:

PV=nRT

328 torr*5.0 L=n*62.364 L Torr/mol/K*(32+273) K

n=328 torr*5.0 L/62.364 L Torr/mol/K*305 K

n=1640/19021.02 mol

n=0.0862 mol

Thus, the moles of gas are 0.0862 mol.

To learn more about gas check the link below:

https://brainly.com/question/25736513

#SPJ4

amp-pnp is a non-hydrolyzable analog of atp that can bind to proteins in a similar manner as atp but is no longer hydrolyzed. predict what would happen to helicase activity if amp-pnp were added to a dna replication reaction.

Answers

Since the AMP-PNP is not hydrolyzed, the helicase would no longer work. DNA unwinding by helicase is made possible by conformational changes brought on by ATP binding and hydrolysis.

What happens during DNA replication?

A double-stranded DNA molecule is copied to create two identical DNA molecules through the process of DNA replication. Because every time a cell divides, the two new daughter cells must have the same genetic material, or DNA, as the parent cell, replication is a crucial process.

What function does a helicase serve?

By using the energy-equivalent ATP, DNA helicases are enzymes that can unwind DNA. All species depend on them for DNA recombination, DNA repair, and replication.

Learn more about ATP here:

https://brainly.com/question/15695707

#SPJ4

balance the following redox reaction if it occurs in acidic solution. what are the coefficients in front of h+ and fe3+ in the balanced reaction? fe2+(aq) + mno4-(aq) → fe3+(aq) + mn2+(aq)

Answers

Redox reaction if it occurs in acidic solution

Fe2+(aq) + MnO4(aq) ----> Fe3+ (aq) + Mn2+(aq)

1-

Fe+2---->Fe+3  ....oxidation

MnO4 ------> Mn2+ reduction

2- Balance the reaction by

Balance oxidation numbers by adding electrons.

Balance charge by adding H+ (acidic solutions) or OH- (basic solutions).

Balance H atoms by adding H2O. Balancing Redox Reactions

Fe2+(aq) ---> Fe3+(aq) + e-

MnO4-(aq) + 8H+(aq) + 5e- ---> Mn2+(aq) + 4H2O

3- Net equation

5Fe2+(aq) + MnO4-(aq) + 8H+(aq) ---> 5Fe3+(aq) + Mn2+(aq) + 4H2O

learn more about Redox reaction here:

https://brainly.com/question/13293425

#SPJ4

1. 14.61 g of sodium chloride is dissolved in water to make 500 ml of solution. (show work) a. what is the mass/volume %? b. what is the molarity of this solution?

Answers

14.61 g of sodium chloride is dissolved in water to make 500 ml of solution. (show work) a. what is the mass/volume %? b. what is the molarity of this solution?   0.499 (approx)

Mass of sodium chloride, m​​​​​solute=14.61 g    (given)

Volume of solution,v ​​​​​solution=500 ml=0.5 litres (given)

a. Mass/volume % is ratio of mass of solute in grams and volume of solution in ml multiplied from 100%

Mass/volume%=(m​​​​​solute/v​​​​​solution)*100%

           =(14.61/500)*100%

Mass/volume%=2.928%

b. Mass of sodium is 23 and chlorine is 35.5

Molecular mass of sodium chloride ie NaCl=23*1+35.5*1=58.5

Number of moles of NaCl is found by dividing mass of NaCl in grams by molecular mass of NaCl,

Number of moles of NaCl,n​​​​​solute=14.61/58.5

Molarity of the solution is found by dividing number of moles of solute ie sodium chloride (NaCl) from volume of solution in litres,

Thus,

Molarity of solution=n​​​​​​solute/v​​​​​​solution

        =(14.61/58.5) / 0.5

       =0.499 (approx)

Sodium chloride is used as an electrolyte replenisher to assist save you warmth cramps as a result of an excessive amount of sweating. This medicinal drug is likewise used for the coaching of normal isotonic answer of sodium chloride. This medicinal drug is to be had without prescription.

Learn more water here:-

https://brainly.com/question/1313076

#SPJ4

for molecules with only one central atom, how many pairs isolated in the central atom guarantee molecular polarity?

Answers

for molecules with only one central atom, only one pair isolated in the central atom guarantee for molecular polarity.

what is molecular polarity?

When a molecule, which can be made up of multiple covalent bonds, has a net polarity, one end has a higher concentration of negative charge and the other end has an excess of positive charge, this is referred to as molecular polarity.

What are the types of molecular polarity?

The projected degree of polarity in the bond and, subsequently, the type of connection, are generally indicated by the absolute value of the difference in electronegativity (EN) between two linked atoms. A covalent, nonpolar bond develops when the difference is extremely small or nonexistent. When the bond is large, it is either ionic or polar covalent.

What increases molecular polarity?

An rising differential in electronegativity is accompanied by an increase in bond polarity and ionic character. The electrons in compounds with polar covalent bonds are distributed unevenly among the bound atoms. The respective electronegativities of the bound atoms have a significant role in determining the polarity of such a connection.

learn more molecular polarity visit :

https://brainly.com/question/3016219

#SPJ4

A veterinarian prescribed 1,500 mg of glucosamine (C6H13NO5) to a golden retriever with an arthritic hip. How many moles is the dog taking each day?

Answers

Answer:

30 pts

Explanation:

Which of the following is the energy of atoms vibrating inside an object?
O A. Radiant
OB. Thermal
O C. Electric
OD. Mechanical

Answers

The answer is should be A. Radiation has a lot to do with build of atoms and there charges.

if you have a complex ion in aqueous solution and the solutionis yellow, what is the approximate wavelength of visible light thatis being most effectively absorbed by the complex?

Answers

Answer:

10 pts

Explanation:

which material has carbon atoms interspersed with iron atoms in its molecular structure? responses steel steel malachite malachite hematite hematite bauxite

Answers

The carbon atoms interspersed with iron atoms in its molecular structure has steel.

The carbon atom have the chemical symbol of C. the atomic number of the carbon is 6. the electronic configuration of the carbon atom is 1s² 2s² 2p². the iron atom has the chemical symbol of Fe. the iron atom having the atomic number 26. the electronic configuration is [Ar] 3d⁶ 4s².

The steel is an alloy which is made up of the iron with the added carbon to it .the carbon improve its strength compared to the irons. steel is the alloy which is made up of the iron and the carbon.

To learn more carbon here

https://brainly.com/question/13719781

#SPJ4

extraction is the process of removing compounds from a solution by taking advantage of varying solubilities. the process of extraction for a mixture of diethylamine, phenol, acetic acid, and ammonia involves three steps. 1. add a strong acid and shake the solution. let the aqueous layer drain off. 2. add a weak base and shake the solution. let the aqueous layer drain off. 3. add a strong base and shake the solution. let the aqueous layer drain off.
Which of the four components would be the first to enter the aqueous phase in this extraction? o ethylbenzene o diethylamine o butanoic acid o phenol

Answers

In this extraction, acetic acid would be the first substance to mix with water.

How does extraction work?

When a substance is "extracted," it is moved from a solid or liquid into a separate solvent or phase. The method most frequently used in chemical labs is liquid-liquid extraction, which takes place in a separatory funnel.

The funnel is filled with a dissolved component solution, an immiscible solvent is added, and the two layers are shaken together. It is most typical for one layer to be an organic solvent and the other to be an aqueous one. When components migrate from one layer to the next, they are "extracted."

By taking use of the different ways that different compounds are soluble in aqueous and organic solvents, extraction is the process of extracting specific components from a mixture.

Three steps are involved in the extraction process for a mixture of diethylamine, phenol, acetic acid, and ammonia. 1. Shake the mixture after adding a powerful acid. Ladder off the watery layer. 2. Include a weak base and stir the mixture. Ladder off the watery layer. 3. Add a solid base and stir the mixture. Ladder off the watery layer.

To know more about extraction , click on the given link

https://brainly.com/question/15870983

#SPJ4

if the anode electrode in a voltaic cell is composed of a metal that participates in the oxidation half-cell reaction, what happens to the electrode?

Answers

Where the oxidation reaction occurs is at the anode. Therefore, this is the location where the metal loses electrons. Since it goes from oxidation state 0 to +2 in the reaction above, the anode is the Cu(s). Cathode: The cathode is the site of the reduction reaction.

Oxidation takes place at the anode and reduction at the cathode, as indicated by the mnemonic "Red Cat An Ox." The anode is the negative terminal for the galvanic cell because it is the source of electrons for the current generated by the reaction at the anode.

Learn more about the anode

https://brainly.com/question/17109743

#SPJ4,

Equilibrium calculations: Using the equation below for calculating the equilibrium constant for the reaction of PCl3 + Cl2 to produce PCs, make the following substitutions for the reactants and products, and recalculate the equilibrium constant, then comment on the equilibrium constant does it favor products, or reactants? [PCI) = 5.0 mol/L [Cl2] = 5.0 mol/L [PC1s] = 0.1 mol/L [PCI ] 0.050 mol/L K= 9.6 x 10-4 [PC13 ][CI] (7.2 mol/L) (7.2 mol/L) For the steam reformation reaction CH + H2O + CO + 3 H2, calculate the equilibrium constant using the formula and concentrations below, and comment on the equilibrium constant: does it favor products, or reactants? What do you think is the industrial use of this chemical reaction?

Answers

The equilibrium constant is  12.5.

The equilibrium constant of a chemical response is the price of its response quotient at chemical equilibrium, a kingdom approached by means of a dynamic chemical device after enough time has elapsed at which its composition has no measurable tendency towards in addition trade.

The equilibrium consistent of a chemical response is the price of its response quotient at chemical equilibrium, a kingdom approached by a dynamic chemical device after enough time has elapsed at which its composition has no measurable tendency in the direction of further trade.

Calculation:-

CH₄ + H₂O --------->  CO + 2H₂

[CO] = 10⁻² mol/L

     = 0.01 mol/l

[H₂] = 5 × 10⁻¹ mol/l = 0.5 mol/l

[H₂O] = 10⁻² mol/l = 0.01 mol/l

[CH₄] = 10⁻² mol/l = 0.01 mol/l

K = [CO][H₂]³/[CH₄][H₂O]

  = (0.01) × (0.5)³/(0.01)×(0.01)

Kc = 12.5

Equillibirium constant =  12.5

Learn more about equilibrium constant here:-https://brainly.com/question/3159758

#SPJ4

Other Questions
help pleaseee no wrong answerrrrrrr The open source movement makes _____ available to everyone in an effort to continue to build and improve the functionality of open source software. A call option with a strike price of 110 is selling for 3.50 when the market price of the underlying stock is 108. The intrinsic value of the call is: (published CFP question, 1994)a, 1.50b, 0.00c. 2.00d. -2.00 The formula A=6V^2/3 related the surface Area A, in square units, of a cube to the volume V, in cubic units. What is the volume, in cubic inches, of a cube with surface area of 396. an executive hires 3 office workers from 8 applicants. (a) in how many ways can the selection be made? croft corporation has a target capital structure of 65 percent common stock and 35 percent debt. its cost of equity is 14 percent, and the cost of debt is 8 percent. the relevant tax rate is 22 percent. what is the company's wacc? which part of a neuron receives nerve impulses from other neurons and conducts them towards the cell body? the capital gains (losses) netting process for taxpayers without 25 or 28 percent capital gains requires them to (1) net short-term gains and losses, (2) net long-term gains and losses, and (3) net the outcome of steps (1) and (2) if they are of similar sign. A company manufactures two types of electric hedge trimmers, one of which is cordless. The cord-type trimmer requires 2 hours to make, and the cordless model requires 10 hours. The company has only 1000 work hours to use in manufacturing each day, and the packaging department can package only 200 trimmers per day.(a) Write the inequalities that describe the constraints on the number of each type of hedge trimmer produced. (Let x represent the number of cord-type models, and let y represent the number of cordless models.) a full-time agent of an insurance company knows about the aml program of his employer, but the $20,000 in money orders his customer is using to fund the purchase of a single premium whole life insurance policy would help his meet her sales goal for the year. consequently, he overlooks the source of funds and submits the application to her company. from an aml perspective, the agent has: suppose your company is a merchant and you enter into a contract with another merchant. however, instead of a formalized contract between the two parties, the other company just sends a written memo outlining the products ordered and prices. is this memo sufficient to satisfy the statute of frauds? Suppose a mutual fund has total assets of $25,500,000 and liabilities of $2,100,000. Currently there are 10,200,000 shares outstanding. Determine the net asset value of the fund? Round to the nearest cent. Show your work The of the degrees of each factor is the degree of the product. describe the allowance method of accounting for uncollectible accounts and the two bases that are generally used to calculate the allowance. sometimes busy physicians have difficulty waking up in the middle of the night. what are some of the best strategies to use? which of the following would be the most effective statement in a bad-news letter declining an invitation to speak to a professional organization? a. although i'm not authorized to tell you why, i can't speak at your dinner. b. i regret to inform you that i am unable to speak to your professional organization. c. i'm not interested in addressing your professional organization. d. although i'm already booked the night of your dinner, i would be happy to speak to your organization sometime next year. compare the structures of cellulose and amylose. what is the same about the two figures? what is different? what stabilizes these structures Why is shampoo not harmful to hair but soap is? select all statements that apply. What does it mean to practice situational awareness on the fireground?Select one:a. Following the IC's orders without questionb. Performing all duties to the best of your abilityc. Being observant about hazards and changing conditionsd. Creating a strategic plan of attack for fire suppression Dodge has identified a hostile attributional bias that reactive aggressors display. In accord with the hostile attributional bias, reactive aggressors are likely to _____ hostile intent to a harmdoer when _____ .a. overattribute; the harmdoer's intent is ambiguousb. underattribute; the harmdoer's intent is benignc. overattribute; the harmdoer's intent is hostiled. none of these