Answer:
In general, the number of valence electrons is the same within a column and increases from left to right within a row. Group 1 elements have just one valence electron and group 18 elements have eight, except for helium, which has only two electrons total.
Which of the following is the correct definition of "weathering"? *
The movement of rocks
The breakdown of rocks.
The dropping off of rocks
All of the above
explanation and answer and you’ll get brain list
Answer:
Option B.
Explanation:
2Pb(NO₃)₂ → 2PbO + 4NO₂ + O₂First we convert 9.90 g of Pb(NO₃)₂ into moles, using its molar mass:
9.90 g ÷ 331.2 g/mol = 0.0299 mol Pb(NO₃)₂Then we convert moles of Pb(NO₃)₂ into moles of PbO, using the stoichiometric coefficients:
0.0299 mol Pb(NO₃)₂ * [tex]\frac{2molPbO}{2molPb(NO_3)_2}[/tex] = 0.0299 mol PbONow we convert 0.0299 mol PbO into grams, using its molar mass:
0.0299 mol PbO * 223.2 g/mol = 6.67 g PbOSo 6.67 g is the theoretical yield. With that in mind we calculate the percent yield:
% yield = 5.51 / 6.67 * 100 % = 82.6%So the correct answer is option B.
Explain about Bose-Einstein condensate.
Answer:
A Bose-Einstein condensate or BEC in simple words is a group of atoms cooled near absolute zero.
Glven 4.62 mol of sodium hydroxide, NaOH, how many grams are present?
According to the mole concept , there are 184.8 grams in 4.62 moles of sodium hydroxide.
What is a mole?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.Number of moles is given as, mass/ molar mass
∴mass=number of moles×molar mass
On substitution, mass= 4.62×40=184.8 g
Thus, there are 184.8 g in 4.62 mole of sodium hydroxide.
Learn more about mole,here:
https://brainly.com/question/26416088
#SPJ2
When 136g of glycine are dissolved in of a certain mystery liquid , the freezing point of the solution is lower than the freezing point of pure . On the other hand, when of sodium chloride are dissolved in the same mass of , the freezing point of the solution is lower than the freezing point of pure . Calculate the van't Hoff factor for sodium chloride in . Be sure your answer has a unit symbol, if necessary, and round your answer to significant digits.
The given question is incomplete. The complete question is:
When 136 g of glycine are dissolved in 950 g of a certain mystery liquid X, the freezing point of the solution is 8.2C lower than the freezing point of pure X. On the other hand, when 136 g of sodium chloride are dissolved in the same mass of X, the freezing point of the solution is 20.0C lower than the freezing point of pure X. Calculate the van't Hoff factor for sodium chloride in X.
Answer: The vant hoff factor for sodium chloride in X is 1.9
Explanation:
Depression in freezing point is given by:
[tex]\Delta T_f=i\times K_f\times m[/tex]
[tex]\Delta T_f=T_f^0-T_f=8.2^0C[/tex] = Depression in freezing point
[tex]K_f[/tex] = freezing point constant
i = vant hoff factor = 1 ( for non electrolyte)
m= molality =[tex]\frac{136g\times 1000}{950g\times 75.07g/mol}=1.9[/tex]
[tex]8.2^0C=1\times K_f\times 1.9[/tex]
[tex]K_f=4.32^0C/m[/tex]
Now Depression in freezing point for sodium chloride is given by:
[tex]\Delta T_f=i\times K_f\times m[/tex]
[tex]\Delta T_f=20.0^0C[/tex] = Depression in freezing point
[tex]K_f[/tex] = freezing point constant
m= molality = [tex]\frac{136g\times 1000}{950g\times 58.5g/mol}=2.45[/tex]
[tex]20.0^0C=i\times 4.32^0C\times 2.45[/tex]
[tex]i=1.9[/tex]
Thus vant hoff factor for sodium chloride in X is 1.9
Based on Table F, which compound is least soluble in water?
1. AIPO4
2. Li2SO4
3. Ca(OH)2
4. AgC₂H₂O2
Based on Table F, the chemical compound which is least soluble in water is: 1. [tex]AlPO_4[/tex].
What is solubility?Solubility can be defined as a terminology that describes how readily a chemical substance or compound can be dissolved in a solvent to form a solution.
In Chemistry, a chemical substance or compound is said to be soluble if it dissolves completely in a solvent such as water.
Based on Table F, the chemical compound which is least soluble in water is [tex]AlPO_4[/tex] because phosphates are generally insoluble.
Read more on solubility here: https://brainly.com/question/23946616
what components of static electricity theory does Electrostatic Precipitator make use of
Answer:
Electrostatic smoke precipitators work by forcing dirty flue gas (the gas escaping from a smokestack) past two electrodes (electrical terminals), which take the form of metal wires, bars, or plates inside a pipe or smokestack
Explanation:
Which of the following is the Brønsted-Lowry definition of an acid?
Answer:
A Brønsted-Lowry acid is any species that can donate a proton (H +) to another molecule. A Brønsted-Lowry base is any species that can accept a proton from another molecule. In short, a Brønsted-Lowry acid is a proton donor (PD), while a Brønsted-Lowry base is a proton acceptor (PA).
Which of the following apply to concentration?
Answer:Concentration of products can vary.
As more solute dissolves, more ions form; but the volume in which they are contained does not change.
Concentration of the solid phase does not change.
Explanation:
What is one way that minerals crystallize from materials dissolved in water?
Answer:
From solutions that evaporate
From hot water solutions when the solution cools
Explanation:
The substances that can form minerals can be dissolved in the water to form a solution. Solution can be described as as a mixture in which a solute is dissolved in a solvent. When a particular dissolved solute evaporates from the solution, crystals of minerals might form. The mineral halite was formed when seas evaporated over a period of time.
The minerals can also be formed when a hot water solution gets cooled.
Consider the addition of an electron to the following atoms from the fourth period. Rank the atoms in order from the most negative to the least negative electron affinity values based on their electron configurations. Atom or ion Electron configuration BrBr 1s22s22p63s23p64s23d104p51s22s22p63s23p64s23d104p5 GeGe 1s22s22p63s23p64s23d104p21s22s22p63s23p64s23d104p2 KrKr 1s22s22p63s23p64s23d104p61s22s22p63s23p64s23d104p6 Rank the electron affinity from most negative to least negative. To rank items as equivalent, overlap them. View Available Hint(s)
Answer:
Br>Ge>Kr
Explanation:
Electron affinity is the energy change that results from adding an electron to a gaseous atom(Khan Academy). It is also defined as "the amount of energy released when an electron is attached to a neutral atom or molecule in the gaseous state to form a negative ion" (Wikipedia).
Electron affinity increases from left to right in the periodic table. However, the noble gases possess a complete outermost electron shell.
Hence, electron affinity can be raked from the most negative to the least negative for the three atoms as follows; Br>Ge>Kr
what are the three components of a chemical formula?
Answer:
The three components of a chemical formula are the empirical formula, the molecular formula, and the structural formula.Hope this answer helps.
Question #37.P.2A.2
Which statement about the periodic table is true?
a. Elements in the same column share similar properties.
b. Elements in the same row share similar properties.
c. Elements on the left have a larger nucleus than elements on the right.
d. Elements at the top of each column have the highest atomic mass in that column.
Knowing that Boyle's Law is P1V1 = P2V2, How would we rearrange the formula if we needed to solve for P1?
A. P1 = V1 -P2
B. P1 = P2V2 - V1
C. P1 = P2V2/V1
D. P1= V1/V2
Answer:
your answer is C
Explanation:
because when u make P1 the subject formula then P2 V2 will be divided with V1
Name the SI base units that are important in chemistry.
Units of the SI System
There are seven base units in the SI system:
the kilogram (kg), for mass
the second (s), for time
the kelvin (K), for temperature
the ampere (A), for electric current
the mole (mol), for the amount of a substance
the candela (cd), for luminous intensity
the meter (m), for distance
1. Which kingdom is made up of only autotrophs?
A. Protista
I
B. Animalia
C. Plantae
D. Phylum
Answer: I believe it's C
Hope this helped<3
Can you please make my answer brainly
Which bond occurs between two metal atoms?
Answer:
An ionic bond is a type of chemical bond formed through an electrostatic attraction between two oppositely charged ions. Ionic bonds are formed between a cation, which is usually a metal, and an anion, which is usually a nonmetal. A covalent bond involves a pair of electrons being shared between atoms.
Answer:
Hi! An ionic bond is a type of chemical bond formed through an electrostatic attraction between two oppositely charged ions. Ionic bonds are formed between a cation, which is usually a metal, and an anion, which is usually a nonmetal. A covalent bond involves a pair of electrons being shared between atoms.
If this helped drop a brainley plz ;)
Explanation:
A chemist titrates 50.0 mL of a 0.1333 M benzoic acid (HCH,CO2) solution with 0.2560M NaOH solution at 25 °C. Calculate the pH at equivalence. The
PK, of benzoic acid is 4.20.
Round your answer to 2 decimal places.
Note for advanced students: you may assume the total volume of the solution equals the initial volume plus the volume of NaOH solution added.
DH-0
5
?
_BaS + _PtF2 → _BaF2 + _Pts
[tex]\huge\underline\mathbb\pink{ANSWER\::}\\\\[/tex]
_BaS + _PtF2 → _BaF2 + _Pts
Barium Sulfide + Platinum(II) Fluoride = Barium Fluoride + Platinum(II) Sulfide.
=> 1 BaS + 1 PtF2 → 1 BaF2 + 1 PtS
[tex]\\\\\\[/tex]
HOPE IT HELPS
PLEASE MARK ME BRAINLIEST☺️
What is the correct name of the acid corresponding to the BrO3- oxoanion
Answer:
hello
Bromate is a bromine oxoanion and a monovalent inorganic anion. It is a conjugate base of a bromic acid.
Explanation:
thanks
HELP ANYONE THERE
At a research lab, a scientist carelessly pours cultures of living microbes down the drain. Which type of pollution is this?
Question 4 options:
toxic
sediment
nutrient
bacterial
A scientist that carelessly pours cultures of living microbes down the drain represents a type of bacterial pollution.
What is bacterial pollution?Bacterial pollution refers to the uncontrolled proliferation of bacteria in the surrounding environment and ecosystems.
Bacterial pollution can be a subject of concern because bacteria may be pathogenic microorganisms.Bacterial pollution may cause serious harm to the public health and the well-being of a population.In conclusion, a scientist that carelessly pours cultures of living microbes down the drain represents a type of bacterial pollution.
Learn more in:
https://brainly.com/question/24704410
#8 explain and answer
Answer:
B. The limiting reactant determines the maximum amount of product that can be formed.
A student said, "You can't see the full Moon during the day because it rises close to sunset."
Which diagram supports this statement? (Diagrams are not to scale. You are looking down from
a north polar view fisa person standing on Earth at sunset.)
Oq. Ooo
Ooo
OD
ОА
OB
ОС
OD
Answer:
I think it would be B.
Explanation:
8. A liquid boils when the vapor pressure of the liquid equals the atmospheric pressure on the surface
of the liquid. Using Reference Table H, determine the boiling point of water when the atmospheric
pressure is 90. kPa
Answer:
It is 98 degrees C.
Explanation:
Which characteristic is most likely found in a nuclide that is radioactive and synthetic?
an atomic number of 30
a mass number of 30
an atomic number of 94
a mass number of 94
Answer:
An atomic number of 94
Explanation:
Just took the practice
How many moles of gold atoms do 3.45x10^24 gold atoms constitute?
Answer:
3.45E24
Explanation:
calculator I'm not that great at math but I'm good at science but that isn't really science but it's aix between it tho
Beth heats a pot of water to cook pasta. What may happen as a result of adding heat
Answer:
the pasta will soften
Explanation:
the pasta will boil and will soften up as a result of it being regular pasta
The transfer of energy is called
work
power
kinetic energy
potential energy
Boyle's Law states that when a sample of gas is compressed at a constant temperature, the pressure P and volume V satisfy the equation PV = C, where C is a constant. Suppose that at a certain instant the volume is 100 cm3, the pressure is 150 kPa, and the pressure is increasing at a rate of 30 kPa/min. At what rate is the volume decreasing at this instant?
Answer:
The volume is decreasing at a rate of 30 cm³/min.
Explanation:
From the question given above, pressure (P) and volume (V) are related by the following equation
PV = C
C => constant
If we make P the subject of the above, we shall have:
P = C/V
From the equation above (i.e P = C/V),
We can say that P is inversely proportional to V. This implies that as P is increasing, V will be decreasing and also, as P is decreasing, V will be increasing.
Considering the question given above, the pressure (P) is increasing at a rate of 30 kPa/min. Therefore, the volume will be decreasing at a rate of 30 cm³/min.
What is true about the position of any metal in the periodic table
Answer:
The metals are on the bottom left in the periodic table, and the nonmetals are at the top right. The semimetals lie along a diagonal line separating the metals and nonmetals. The elements are arranged in a periodic table, which is probably the single most important learning aid in chemistry.
Explanation:
im not sure if there was supposed to options to that question or not