What is the name of NaC2H3O2?

Answer:

See explanation.

Explanation:

Hello there!

In this case, according to the described chemical reaction, we first write the corresponding equation to obtain:

[tex]Cu+2AgNO_3\rightarrow 2Ag+Cu(NO_3)_2[/tex]

Thus, we proceed as follows:

Part 1 of 3: here, since the molar mass of silver and copper (II) nitrate are 107.87 and 187.55 g/mol respectively, and the mole ratio of the former to the latter is 2:1, we can set up the following stoichiometric expression:

[tex]m_{Cu(NO_3)_2}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{1molCu(NO_3)_2}{2molAg}*\frac{187.55gCu(NO_3)_2}{1molCu(NO_3)_2} \\\\m_{Cu(NO_3)_2}=1.12gCu(NO_3)_2[/tex]

Part 2 of 3: here, the molar mass of copper is 63.55 g/mol and the mole ratio of silver to copper is 2:1, the mass of the former that was used to start the reaction was:

[tex]m_{Cu}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{1molCu}{2molAg}*\frac{63.55gCu)_2}{1molCu} \\\\m_{Cu}=0.380gCu[/tex]

Part 3 of 3: here, the molar mass of silver nitrate is 169.87 g/mol and their mole ratio 2:2, thus, the mass of initial silver nitrate is:

[tex]m_{AgNO_3}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{2molAgNO_3}{2molAg}*\frac{169.87gAgNO_3}{1molAgNO_3} \\\\m_{AgNO_3}=2.03gAgNO_3[/tex]

Best regards!

Answer:

C)12.09 Ampere

Explanation:

V= IR

Where I= current of the system

R= resistance= 0.67 ohm

V= potential difference=8.1 volts

Substitute the values

8.1= I× 0.67

I= 8.1/0.67

=12.09 Ampere

Answer: The new temperature of container is 123 K.

Explanation:

Given: [tex]P_{1}[/tex] = 795 mm Hg,     [tex]T_{1}[/tex] = 273 K

[tex]P_{2}[/tex] = 358 mm Hg,          [tex]T_{2}[/tex] = ?

Formula used to calculate the new temperature is as follows.

[tex]\frac{P_{1}}{T_{1}} = \frac{P_{2}}{T_{2}}[/tex]

Substitute the values into above formula as follows.

[tex]\frac{P_{1}}{T_{1}} = \frac{P_{2}}{T_{2}}\\\frac{795 mm Hg}{273 K} = \frac{358 mm Hg}{T_{2}}\\T_{2} = 123 K[/tex]

Thus, we can conclude that the new temperature of container is 123 K.

Answer:

A climate change

Explanation:

the surrounding area would be effected in all ways imaginable, such as change in air, soil, water, plants, animals. and if you eat those said animals those harmful things can transfur into you

Answer:

1.13 L

Explanation:

First, we have to write the chemical equation for the reaction between ammonia gas (NH₃) and oxygen gas (O₂) to give nitrogen gas (N₂) and water (H₂O), as follows:

NH₃(g) + O₂(g) → N₂(g) + H₂O(g)

Then, we have to balance the equation (we write first the coefficient 2 for NH₃ to balance N atoms, then a coefficient of 3 for H₂O to balance H atoms, and finally 1/3 to balance the O atoms):

2 NH₃(g) + 3/2 O₂(g) → N₂(g) + 3 H₂O(g)

In the balanced equation, we can see that 1 mol of N₂ is produced from 2 moles of NH₃. We convert the moles of NH₃ to grams by using its molecular weight (MW):

MW(NH₃) = 14 g/mol N x 1 + (1 g/mol H x 3) = 17 g/mol

grams of NH₃ = 17 g/mol x 2 = 34 g

Thus, we have the stoichiometric ratio:

1 mol of N₂/2 mol NH₃ = 1 mol of N₂/34 g NH₃

To calculate how many moles of N₂ are produced from 4.0 of NH₃, we multiply the mass by the conversion factor:

4.0 g NH₃ x 1 mol of N₂/34 g NH₃ = 0.1176 moles N₂

Finally, we calculate the liters of N₂ gas by using the ideal gas equation:

PV = nRT ⇒ V = nRT/P

We introduce the data in the equation:

T = 32.00°C + 273 = 305 K

P = 2.6 atm

R = 0.082 L.atm/K.mol (is the gas constant)

n= 0.1176 moles

⇒ V = nRT/P = (0.1176 mol x 0.082 L.atm/K.mol x 305 K)/(2.6 atm)

                     = 1.13 L

Answer:

The 2nd one is the one

Explanation:

and it isn't writen out all the way

Answer:

The tectonic style and viability of modern plate tectonics in the early Earth is still debated. Field observations and theoretical arguments both in favor and against the uniformitarian view of plate tectonics back until the Archean continue to accumulate. Here, we present the first numerical modeling results that address for a hotter Earth the viability of subduction, one of the main requirements for plate tectonics. A hotter mantle has mainly two effects: 1) viscosity is lower, and 2) more melt is produced, which in a plate tectonic setting will lead to a thicker oceanic crust and harzburgite layer. Although compositional buoyancy resulting from these thick crust and harzburgite might be a serious limitation for subduction initiation, our modeling results show that eclogitization significantly relaxes this limitation for a developed, ongoing subduction process. Furthermore, the lower viscosity leads to more frequent slab breakoff, and sometimes to crustal separation from the mantle lithosphere. Unlike earlier propositions, not compositional buoyancy considerations, but this lithospheric weakness could be the principle limitation to the viability of plate tectonics in a hotter Earth. These results suggest a new explanation for the absence of ultrahigh-pressure metamorphism (UHPM) and blueschists in most of the Precambrian: early slabs were not too buoyant, but too weak to provide a mechanism for UHPM and exhumation.

Explanation:

Answer:

The solid crystals disappeared

Explanation:

When a soluble solid solute is added to water, the solid solute disappears after a little while. The disappearance of this solute indicates that the solute has been dissolved in water.

In this case, blue copper sulphate crystals are added to water, the blue crystals disappear leaving only a blue solution. The disappearance of these blue copper sulphate crystals indicates that the substance has dissolved in water.

Answer:

5.9 × 10² kJ

Explanation:

When carbon disulfide, CS₂, forms from its elements, heat is absorbed. The corresponding value for the standard enthalpy of formation of carbon disulfide is 117.36 kJ/mol. The thermochemical equation that represents this process is:

C(graphite) + 2 S(s, rhombic) ⇒ CS₂(g)   ΔH°f = 117.36 kJ/mol

117.36 kJ of heat are absorbed when 1 mole of CS₂ is formed. The amount of heat absorbed when 5.0 moles of CS₂ are formed is:

5.0 mol × 117.36 kJ/mol = 5.9 × 10² kJ

Answer:

a chemical reaction occured

Explanation:

bubbling and fizzing after adding a substance, most offten means a chemical reaction is happening

Answer:

A. They often use up resources that other organisms need.

Explanation:

Invasive alien species are animals, plants, fungi and microorganisms entered and established in the environment from outside of their natural habitat. T

hey reproduce rapidly, out-compete native species for food, water and space, and are one of the main causes of global biodiversity loss.

Answer: Heat energy contained by water is 130.625 J.

Explanation:

Given: Mass = 1.25 g

Specific heat = [tex]4.18 J/g^{o}C[/tex]

Initial temperature = [tex]20.0^{o}C[/tex]

Final temperature = [tex]45.0^{o}C[/tex]

Formula used to calculate heat energy is as follows.

[tex]q = m \times C \times (T_{2} - T_{1})[/tex]

where,

q = heat energy

m = mass of substance

[tex]T_{1}[/tex] = initial temperature

[tex]T_{2}[/tex] = final temperature

Substitute the values into above formula as follows.

[tex]q = m \times C \times (T_{2} - T_{1})\\= 1.25 g \times 4.18 J/g^{o}C \times (45.0 - 20.0)^{o}C\\= 130.625 J[/tex]

Thus, we can conclude that heat energy contained by water is 130.625 J.

Answer:

Explanation:

I can’t explain but this is the answer LOL

Answer:

Yes

Explanation:

The genetic testing is also called as the DNA testing. It is mainly used for identifying the changes in the DNA sequence or the chromosomes structure. It can also measure the results in the genetic changes.

Couples those who are planning to start a family should go for a genetic testing so as to minimize a risk in the upbringing or growth of their offspring. By doing a genetic testing a couple can well know the conditions of the baby that could affect them. The result from a genetic testing can help to plan better before starting a family. Therefore, it is advisable for couples to go for a genetic testing so that they plan better by knowing the conditions.

Answer:

Low-pressure system and clear weather.

Explanation:

Answer:

Pistil

Explanation:

I believe it is the pistil, because the pistil is part of the female reproductive system of a flower. A stamen is for the male reproductive system.

Answer:

Explanation:

A covalent compound is a compound formed by covalent bonds. A covalent bond is formed between two atoms where electrons are shared between the two atoms. This forms a molecule.

What determines whether two elements will form a covalent compound or not is the number of valence electrons present in each of the elements.

Fluorine will form a covalent compound with phosphorous because fluorine has 5 electrons in its outermost shell. It needs 3 more to become stable.

Phosphorous also has 5 valence electrons. It needs 3 more to become stable.

What happens is that 3 atoms of FLuorine combine with one atom of Phosphorus, sharing the valence electrons between themselves. This leads to the formation of the PF3 molecule.

Both the Phosphorous and the Fluorine are now stable.

Answer: Phosphorus

Explanation: since both are non-metals they would both create a covalent bond.

Answer: f = 760 Hz

Explanation:  speed = frequency · wavelength  v = fλ.

frequency f = v/ λ = 380 m/s / 0.50 m = 760 Hz

Answer:

two hydrogen can bonded with oxygen to form H2O

Answer:

Square

Explanation:

A square is a quadrilateral with r sides the same length

Answer:

1.)C₃H₈O

2)OH

3.)1-propanol

1.) C4H8O

2.) C2H6O or CH3CH2OH

3.)Ethanol

Explanation:

Hope this help

Answer:

Explanation:

its supposed to be not supported not inclusive because you said mix

Answer:

15.5 moles

Explanation:

Applying,

PV = nRT.................. Equation 1

Where P = pressure, V = Volume, n = number of mole, R = molar gas constant, T = Temperature.

Make n the subject of the equation

n = PV/RT............... Equation 2

From the question,

Given: P = 0.899 atm, V = 425 L, T = 24 °C = (273+24) K = 297 K.

Constant: R = 0.083 L.atm/K.mol

Substitute these values into equation 2

n = (0.899×425)/(297×0.083)

n = 15.5 moles

Answer:

The cation is written first in the name; the anion is written second in the name. Rule 2. When the formula unit contains two or more of the same polyatomic ion, that ion is written in parentheses with the subscript written outside the parentheses.

When writing the formula of a compound that contains polyatomic ion, the metal is written first followed by the central atom in the ion and then other atoms that surround the central atom.

A poly atomic ion refers to an ion that comprises of more than one atom. Such ions are common in chemistry. Examples of polyatomic ions include; PO4^3-, BH4^- etc.

When writing the formula of a compound that contains a polyatomic ion, the metal is written first then the central atom in the ion follows before other atoms that surround the central atom in the ion.

Learn more: https://brainly.com/question/6284546

Answer:

4

Explanation:

If I remember correctly, the atomic # will always be the same as the # of electrons

Answer:

The answer is C density.

Answer: A

Explanation:

The correct structure of the name of the compound given is  CH₃CH₂C=CC (CH₃)₃.

Dimethyl hexyne is an organic compound. Its chemical formula is C8H14. The compound hexyne is used to make a complex compound, agrochemical, and pharmaceutical compounds.

Thus, the correct option is A, CH₃CH₂C=CC (CH₃)₃.

Learn more about  2,2-dimethyl- 3- hexyne

https://brainly.com/question/24617388

#SPJ2

Answer:

Iron is limiting reactant

Explanation:

Based on the reaction:

Fe + S → FeS

1 mole of iron reacts per mole of Sulfur

To solve this question we must convert the mass of each reactant to moles using molar masses of each reactant. As the reaction is 1:1, the reactant with the lower amount of moles is limiting reactant.

Moles Fe -Molar mass: 55.845g/mol-

4.68g * (1mol / 55.845g) = 0.0838 moles

Moles S -Molar mass: 32.065g/mol-

2.88g * (1mol / 32.065g) = 0.0898 moles

As the amount of moles of Fe < Moles S,

Iron is limiting reactant

When 4.68 g of iron reacts with 2.88 g of sulfur to produce FeS, iron is the limiting reagent.

If in a chemical reaction two reactants are present and one of them is present in less quantity as compared to other, is known as limiting reagent.

Given chemical reaction is:
Fe + S → FeS

From the stoichiometry of the reaction it is clear that equal moles of both reactant is required for the formation of product, so their mole ratio is 1:1.

Now we calculate the moles by using the formula:

n = W/M, where

W = given mass

M = molar mass

Moles of 4.68g of iron = 4.68g / 55.845g/mole = 0.0838 moles

Moles of 2.88 of sulfur = 2.88g / 32.065g/mole = 0.0898 moles

Moles of iron is less as compare to the sulfur, so it is the limiting reagent.

Hence, iron is the limiting reagent.

To know more about limiting reagent, visit the below link:
https://brainly.com/question/14222359

Answer:

6

Explanation:

Answer:

A. A as concentration decreases.

Explanation:

A represents a reactant and B is a product, the concentration of the latter increases at the expense of the concentration of the former. Hence, A is the reactant of the chemical reaction as its concentration decreases.