what is the most widely believed though likely false aspect of the olympic truce story

Answer:

Heat of the reservoir is 461.38 K or 188.1 °C

The heating load is 18.705 kW

Explanation:

COP = 8.7

working temperature [tex]T_{h}[/tex] = 248 °C = 248 + 273.3 = 521.3 K

work power W = 2.15 kW

reservoir temperature [tex]T_{c}[/tex] = ?

heating load Q = ?

We know that

COP = Q/W

Q = COP x W = 8.7 x 2.15 = 18.705 kW

Also,

COP = [tex]\frac{T_{h} }{T_{h}- T_{c} }[/tex] = [tex]\frac{521.3}{521.3- T_{c} }[/tex]

8.7 = [tex]\frac{521.3}{521.3- T_{c} }[/tex]

4535.31 - 8.7[tex]T_{c}[/tex]  = 521.3

4535.31 - 521.3 = 8.7[tex]T_{c}[/tex]  

4014.01 = 8.7[tex]T_{c}[/tex]  

[tex]T_{c}[/tex]  = 4014.01/8.7 = 461.38 K

or 461.38 -273.3 = 188.1 °C

Answer:

B. A large number of atoms move from one place to another

Explanation:

Convection is heat transfer by the movement of atoms of a substance from one region to another across a temperature gradient. Since atoms of solids are rigidly held in place, convection only occurs in liquids and gases since they flow.

Convection occurs when the temperature of one region of a fluid (liquid or gas) is higher than its other region. There is thus a mass movement of atoms from one region to the other due to a temperature difference. The atoms will continue to move to the region of lower temperature until the temperature of both regions are the same at an equilibrium temperature.

Answer:

The automobile tire rotates 91 revolutions

Explanation:

Given;

angular acceleration of the automobile, α = 2.13 rad/s²

time interval, t = 23.2-s

To calculate the number of revolutions, we apply the first kinematic equation;

[tex]\theta = \omega_i \ + \frac{1}{2} \alpha t^2[/tex]

the initial angular velocity is zero,

[tex]\theta =0\ + \frac{1}{2} (2.13) (23.2)^2\\\\\theta = 573.2256 \ Rad[/tex]

Find how many revolutions that are in 573.2256 Rad

[tex]N = \frac{\theta}{2 \pi} = \frac{573.2256}{2\pi} \\\\N = 91 \ revolutions[/tex]

Therefore, the automobile tire rotates 91 revolutions

Answer:

Net displacement = 3.2 m

Explanation:

Given:

Mass of man = 80 kg

Mass of trolley = 320 kg

Speed = 1 m/s

Time = 4 sec

Computation:

Displacement by man = 1 m/s × 4 sec

Displacement by man = 4 m

Net ext force (trolley) = com at rest

So,

320 × X = 80(4 - X)

32X = 32 - 8X

40X = 32

X = 0.8 m

Net displacement = 4 m - 0.8 m

Net displacement = 3.2 m

Answer:

3) 3.2 m

Explanation:

The computation of the displacement relative to the ground after 4 seconds is shown below:

Let us assume the following

Starting x coordinate is at the origin

As it does not involve any external force so x coordinated would remain unchanged

Now the separation between the man and the trolley is

[tex]= 4 \times 1[/tex]

= 4 m

And, we assume the displacement of man be x

So, for trolley it would be (4 -x)

Now we develop the equation which is

[tex]80 \times x = 320 \times (4 - x)[/tex]

x = 16 - 4x

Therefore x = 3.2 m

[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]

Actually Welcome to the Concept of the Waves and it's motion.

So we here apply the formula as,

Velocity = frequency*wavelength

so here we get as,

340 = 500 * Lambda

Lambda = 340/500

so we get the distance as,

L = 0.68 m

Answer:

λ = 0.68 m

Explanation:

Distance between a point of rarefaction and the next compression point is actually the wavelength (λ)

So, we'll find wavelength here:

Given:

Frequency = f = 500 Hz

Speed = v = 340 m/s

Required:

Wavelength = λ = ?

Formula:

v = f λ

Solution:

λ = v/f

λ = 340/500

λ = 0.68 m

Answer:

density=mass/volume

39.943/22.7=1.75

Explanation:

Answer:

Solution,

Displacement(s)=200 m

Initial velocity (u)=?

Final velocity(v)=0 m/s^2

acceleration due to gravity(g)=-9.8 m/s^2

now,

[tex] {v}^{2} = {u}^{2} + 2as \\ {(0)}^{2} = {u}^{2} + 2 \times ( - 9.8) \times 200 \\ {u}^{2} = 2 \times 9.8 \times 200 \\ {u}^{2} = 3920 \\ u = \sqrt{3920} \\ u = \sqrt{ {62.6}^{2} } \\ u = 62.6 \: metre \: per \: second[/tex]

Again,

Finding time taken,

[tex]v = u + at \\ t = \frac{v - u}{a} \\ = \frac{0 - 62.6}{ - 9.8} \\ = \frac{ - 62.6}{ - 9.8} \\ = 6.39 \: seconds[/tex]

Hope this helps...

Good luck on your assignment...

Answer:

They're made of silicon and oxygen.

Explanation:

Answer:

t = 3.79 s

Explanation:

We have,

A football is kicked at ground level with a speed of 18.6 m/s at an angle of 44.9 to the horizontal.

It means that,

Initial speed of a football, u = 18.6 m/s

Final speed of a football, v = 0 (when it hits the ground)

It would under the action of gravity. Let t is the time of motion. So, using equation of kinematics to find it.

v=u+at

a=-g

[tex]t=\dfrac{v-u}{a}\\\\t=\dfrac{0-18.6}{-9.8}\\\\t=1.89\ s[/tex]

The total time before the ball hits the ground is the sum of time taken to come down and time taken to go up. So, total time is 2×1.89 = 3.79 s

Answer:

but I can tomorrow if you have time can you come to the meeting tonight but yyyy the person who is this and what

Explanation:

gyyyyyyyyyyyyyyyyy the number of the person who is this and what is the

Answer:

A  mercury barometer is a device use to measure stomspheric pressure and is constructed as following:

The position of tube creates vacuum between the closed end of the tube and liquid surface and the Mercury has high density that is why used as the liquid to measure pressure.

Explanation:

action and reaction forces act on the same body since these are forces that oppose that are opposite

Answer: 20 minutes

Explanation:

Given the following :

Average speed of train = 120km/hr

Distance = 40km.

The time take by the train moving at an average speed of 120km/hr to cover a distance of 40km due is ;

Recall:

Speed = distance / time

Therefore,

Time taken = distance covered / speed

Time taken = 40km / 120km/hr

Time taken = 1/ 3 hr

Therefore, 1/3 rd of an hour equals

1/3 × 60 = 20 minutes.

Time taken) 20 minutes

Time taken by tain to cover distance is 20 minutes as:

Distance= 40 km

Speed= 120 km/h

Time= distance/speed

= 40/120

= 1/3 hour

= 20 min

or  =0.33 hrs

To know more about' Time and Speed 'visit:

https://brainly.com/question/28735144

Answer: 36.5N

Explanation:

Given that the side length of cube (s) = 0.155m

The buoyant force also regarded as upthrust can be explained as the upward force exerted on by a fluid on an object immersed in it.

Buoyant force is calculated using the formula :

F = density × volume × acceleration due to gravity

Density of water = 1000kg/m^3

Volume of cube = s^3

Volume = 0.155^3 = 0.003723875

Recall:

density = mass / volume

Mass = density * volume

Mass = 1000kg/m^3 * 0.003723875m^3

Mass = 3.723875kg

Buoyant force or upthrust = weight of fluid displaced.

Weight = mass * acceleration due to gravity

Buoyant force = (3.723875 * 9.8)

Buoyant force = 36.493975

= 36.5N

Answer:

[tex]k=784 N/m[/tex]

[tex]\Delta x=8,8 cm[/tex]

Explanation:

Usando la ley de Hook tenemos:

[tex]F=k\Delta x[/tex]

Solving it for k we have:

[tex]k=\frac{F}{\Delta x}[/tex]

[tex]k=\frac{39,2}{0,05}[/tex]

[tex]k=784 N/m[/tex]

Usando la misma ecuación y sabiendo k tenemos:

[tex]\Delta x=\frac{F}{k}[/tex]

[tex]\Delta x=\frac{68,6}{784}[/tex]

[tex]\Delta x=8,8 cm[/tex]

Espero esto te ayude!

Answer:

force on brake shoes is 10 N

Explanation:

for the master cylinder;

force applied = 140 N

diameter = 14d

for brake cylinder;

force applied on the brake shoe by the brake cylinder f = ?

diameter = d

The pressure will be transmitted undiminished from the master cylinder to the brake cylinder according to pascals pressure law.

pressure = force/area

but cross sectional area is proportional to diameter of the cylinder

therefore

[tex]\frac{140}{14d } = \frac{f}{d }[/tex]

the diameters will cancel out, and we're left with

force on brake shoes = 10 N

Answer:

Brainliest please

Explanation:

I will start by saying that Metals by their very nature are conductors of electricity. Now metals exhibit “metallic bonding” which holds its structure together. Unlike other materials which exhibit covalent bonding, it's atoms are not bonded by “electron sharing”. Rather they are bonded by the availability of valence electrons. Now within a metals atomic structure, the metal atoms lose the electrons in thier outermost shell (valence electrons), thus becoming positively charged ions (cations )

Answer:

we should not drop a magnet on the floor because the magnets tend to lose magnetism gradually and become weak over a period of time if they are not stored properly.

Answer:

Well depending on the floor like say if it was a wooden floor the magnet might lose it magnetism, if concrete floor the magnetic brake and still lose it magnetism, if a metal floor the magnet would stick not sure if it wood lose it magnetism or not but the possibilities still there, basically what I'm saying is the magnet would lose its magnetism if it were to interact with the floor maybe temporary or maybe permanently.

for those with with a learning disability it's a

Explanation:

Answer:

The three different type of radiations are:

1) Alpha (α) radiation

2) Beta (β) radiation

3) Gamma ([tex]\gamma[/tex]) radiation

Penetrating Ability:

Penetrating Ability of gamma rays is the highest.

That of Beta Rays is higher.

That of Alpha Rays is lowest

The three types of radiation are alpha particles, beta particles, and gamma rays. From least to most penetrating, alpha < beta < gamma.

Ionizing radiation - form of energy that usually acts by removing electrons from their atoms and molecules of materials that include air, water, and living tissue.

So, these are the types of radiations.

learn more about types of radiations here;

https://brainly.com/question/1303915

#SPJ2

Answer:

25kg

Explanation:

The formula for acceleration due to gravity is:

[tex]g=\dfrac{GM}{r^2}[/tex]

Here, G represents a constant and M represents the mass of the object. We don't need to know the actual values to solve this, then: We can just multiply by the amount they are multiplied relative to earth.

[tex]g=\dfrac{G(0.9M)}{(1.2r)^2}=0.625g[/tex]

Multiplying this by the weight of the person on Earth of 40kg, you get 0.625*40=25kg.

Hope this helps!

Answer:

1. 19.28 secs

2. 154.22 m

Explanation:

The following data were obtained from the question:

Initial velocity (u) = 16 m/s

Final velocity (v) = 0

Force (F) = 1000 N

Mass (m) = 1200 Kg

Time (t) =..?

Distance (s) =...?

Next, we shall determine the acceleration of the car. This can be obtained as follow:

Force (F) = 1000 N

Mass (m) = 1200 Kg

Acceleration (a) =.?

Force (F) = mass (m) x acceleration (a)

F = ma

1000 = 1200 x a

Divide both side by 1200

a = 1000/1200

a = 0.83 m/s²

Since the car is coming to rest, it means it is decelerating. Therefore, the acceleration is – 0.83 m/s²

1. Determination of time taken for the car to halt i.e stop. This can be obtained as follow:

Initial velocity (u) = 16 m/s

Final velocity (v) = 0

acceleration (a) = – 0.83 m/s²

Time (t) =.?

v = u + at

0 = 16 + (–0.83 x t)

0 = 16 – 0.83t

Rearrange

0.83t = 16

Divide both side by 0.83

t = 16/0.83

t = 19.28 secs.

Therefore, the time taken for the car to halt is 19.28 secs.

2. Determination of the distance travelled by the car before coming to rest. This can be obtained as follow:

Initial velocity (u) = 16 m/s

Final velocity (v) = 0

acceleration (a) = – 0.83 m/s²

Distance (s) =..?

v² = u² + 2as

0 = 16² + (2 x –0.83 x s)

0 = 256 – 1.66s

Rearrange

1.66s = 256

Divide both side by 1.66

s = 256/1.66

s = 154.22 m

Therefore, the distance travelled by the car before coming to rest is 154.22 m.

Answer:

180 kJ

Explanation:

Given that:

Mass (m) = 5 kg

Initial temperature (T1) = 28°C

Final temperature (T2) = 68°C

The change in temperature (ΔT) = T2 - T1 = 68°C - 28°C = 40°C

Specific heat capacity of aluminium (c) = 900 J/kg°C

The quantity of heat energy required (q) is given by:

q = mcΔT

q = 5 kg × 900 J/kg°C × 40°C

q =  180000 Joules

q = 180 kJ

Therefore 180 kJ is required to raise the temperature of aluminium from 28°C to 68°C.

Answer:

276 days

Explanation:

1/4 th of the original means 2 half lives

1 half life = 138 days

So,

2 half lives = 276 days

Answer:

[tex]t_{1/2}=6 h[/tex]

Explanation:

Let's use the decay equation.

[tex]A=A_{0}e^{-\lambda t}[/tex]

Where:

We know that [tex]\lambda=\frac{ln(2)}{t_{1/2}}[/tex]

So we have:

[tex]\lambda=\frac{ln(A/A_{0})}{t}[/tex]

[tex]\frac{ln(2)}{t_{1/2}}=\frac{ln(A/A_{0})}{t}[/tex]

[tex]t_{1/2}=\frac{t*ln(2)}{ln(A/A_{0})}[/tex]

[tex]t_{1/2}=6 h[/tex]

Therefore, the half-life of the source is 6 hours.

I hope it helps you!

Answer:

Approximately [tex]480\; \rm kPa[/tex], assuming that this gas is an ideal gas.

Explanation:

By Boyle's Law, the pressure of a sealed ideal gas at constant temperature will be inversely proportional to its volume. Assume that this gas is ideal. By this ideal gas law:

[tex]\displaystyle \frac{P(\text{Final})}{P(\text{Initial})} = \frac{V(\text{Initial})}{V(\text{Final})}[/tex].

Note that in Boyle's Law, [tex]P[/tex] is inversely proportional to [tex]V[/tex]. Therefore, on the two sides of this equation, "final" and "initial" are on different sides of the fraction bar.

For this particular question:

Rearrange the equation to obtain:

[tex]\displaystyle P(\text{Final}) = \frac{V(\text{Initial})}{V(\text{Final})} \cdot P(\text{Initial})[/tex].

Before doing any calculation, think whether the pressure of this gas will go up or down. Since the gas is compressed, collisions between its particles and the container will become more frequent. Hence, the pressure of this gas should increase.

[tex]\begin{aligned}P(\text{Final}) &= \frac{V(\text{Initial})}{V(\text{Final})} \cdot P(\text{Initial})\\ &= \frac{1.0\; \rm m^{3}}{0.25\; \rm m^{3}} \times 120\; \rm kPa = 480\; \rm kPa\end{aligned}[/tex].

Answer:

Part A)

Since all of the resistors have equal resistance, hence for finding even only 1 branch It will be fine because current will be the same for all branches.

=> [tex]I = \frac{V}{R_{1} }[/tex]

=> [tex]I = \frac{30}{15}[/tex]

=> I = 2 A

Part B)

Equivalent resistance for parallel circuits is the sum of reciprocals of each resistor.

=> [tex]\frac{1}{R} = \frac{1}{R_{1}}+\frac{1}{R_{2}} +\frac{1}{R_{3}}[/tex]  

=> [tex]\frac{1}{R} = \frac{1}{15}+ \frac{1}{15}+\frac{1}{15}[/tex]

=> [tex]\frac{1}{R} = \frac{3}{15}[/tex]

=> R = 15/3

=> R = 5 ohms

Part C)

I = V/R

Where I is current, V is voltage and R is the equivalent resistance

=> I = 30/5

=> I = 6 A

Answer: B

Explanation:

Displacement is a vector quantity. it is the distance covered in a specific direction.

Whereas, Velocity = displacement/time

Make displacement the subject of formula

Displacement = velocity × time

From the graph, velocity is constant which is equal to 1 m/s

Displacement in the last two seconds will be velocity multiply by 2. Since time = 2s. Therefore,

Displacement = 1 × 2 = 2 m

So, the particle displacement in the last two seconds will be 2 metres

Answer:

It is not a uniform velocity, because his velocity increases for 5 m every second (acceleration = 5m/s2), meaning his velocity always changes.

When he starts at rest, his velocity is 0 m/s. But in 1 second later, his velocity is already 5m/s. At 2 seconds, his velocity will be 10 m/s.

Answer:

can you attach photo

Explanation:

Magnetosomes are also used to induce magnetic hyperthermia (using magnets to heat cells that have ingested magnetosomes). Scientists were able to kill the pathogenic bacterial cells of Staphylococcus aureus, a common cause of infection, by pumping them full of magnetosomes and applying magnetic heat.

studies show that magnets increase amino acid production and have a positive effect on the whole body. In other words, magnets speed up metabolism and help the body function properly. They ensure that oxygen and nutrients arrive at the site of injury as soon as possible in order to repair the injury.

Magnetic Resonance Imaging (MRI) uses a very strong magnetic field and is much stronger than a household magnet can produce, but MRI does not directly affect the patient's health (MRI is a diagnostic tool). Works indirectly as).

Learn more about magnetic fields here: https://brainly.com/question/14411049

#SPJ2

Explanation:

100 m / (1.20 m) = 83.3

100 m / (0.75 m) = 133.3

Rounded up, the first sprinter takes 84 steps, and the second sprinter takes 134 steps.