The most efficient arrangement of PV panels in a 100 hectare solar farm, assuming that the panels themselves are very cheap would be to use 100 hectares of panels, and put them on tracking mounts that follow the sun.
This is because tracking mounts ensure that the panels are facing the sun at all times, thus maximizing the amount of energy that can be harvested from the sun.
Using a small number of panels with solar concentrators and tracking mounts to follow the sun may also be efficient, but it would not be as effective as using the entire 100 hectares of panels on tracking mounts.
Orienting the panels north would not be efficient since it would not maximize the amount of solar radiation that the panels receive.
Covering the entire 100 hectares with panels flat may seem like a good idea, but it would not be efficient since the panels would not be able to track the sun, and therefore, would not be able to harvest as much energy.
The most efficient arrangement of PV panels in a 100 hectare solar farm, assuming that the panels themselves are very expensive would be to use a small number of panels, with solar concentrators and tracking mounts to follow the sun.
This is because using a small number of panels with solar concentrators would allow for more efficient use of the panels, and tracking mounts would ensure that the panels are facing the sun at all times, thus maximizing the amount of energy that can be harvested from the sun.
Orientating the panels north or covering the entire 100 hectares with panels flat would not be efficient since it would not maximize the amount of solar radiation that the panels receive.
To know more about arrangement visit;
brainly.com/question/30838941
#SPJ11
Exercise 1.14. By the time we have read Pascal's work we will be able to show (Exercise 1.38) that n nk+1 įk +? k-1 +?n +0. =k+1+z² nk k+1 = +1 and There is a simple geometric interpretation of the
First, let us look at Exercise 1.38 where we show that n nk+1 įk +? k-1 +?n +0. =k+1+z² nk k+1 = +1. Second, we have to understand that there is a simple geometric interpretation of the results of the previous part.
For the first part, we can start by replacing the left-hand side of the equation with the formula for the sum of kth powers of the first n positive integers. After applying the formula, we obtain a telescoping series that ultimately reduces to k+1+z² nk k+1 = +1.
For the second part, we have to understand that the kth power of an integer can be represented geometrically by a pyramid that has a rectangular base of length n and width k.
Therefore, we can visualize the sum of kth powers of the first n positive integers as a stack of k pyramids of increasing width, with the smallest pyramid having a base of length one and the largest having a base of length n.
As we increase k from 1 to n, the pyramids become wider and form a structure that can be interpreted as a (n+1)-dimensional pyramid.
Finally, we can conclude that Exercise 1.14 relates to the concept of summation of powers of integers and its geometric interpretation. It demonstrates how to use the formula for the sum of kth powers of the first n positive integers and visualize it as a pyramid of (n+1) dimensions.
We can understand that the concepts of summation of powers of integers and its geometric interpretation are essential. It is a demonstration of how to use the formula for the sum of kth powers of the first n positive integers and visualize it as a pyramid of (n+1) dimensions.To understand Exercise 1.14, we can divide it into two parts. Firstly, we need to look at Exercise 1.38, where we show that n nk+1 įk +? k-1 +?n +0. =k+1+z² nk k+1 = +1.
Secondly, we need to understand the simple geometric interpretation of the previous part. The formula for the sum of kth powers of the first n positive integers can be replaced by the left-hand side of the equation. After applying the formula, we obtain a telescoping series that ultimately reduces to k+1+z² nk k+1 = +1.
The kth power of an integer can be represented geometrically by a pyramid that has a rectangular base of length n and width k. The sum of kth powers of the first n positive integers can be visualized as a stack of k pyramids of increasing width, with the smallest pyramid having a base of length one and the largest having a base of length n. As we increase k from 1 to n, the pyramids become wider and form a structure that can be interpreted as a (n+1)-dimensional pyramid.
In conclusion, Exercise 1.14 demonstrates the relationship between summation of powers of integers and its geometric interpretation. It helps us to visualize the formula for the sum of kth powers of the first n positive integers and how it can be represented as a pyramid of (n+1) dimensions.
Learn more about integers here:
brainly.com/question/490943
#SPJ11
how does the orientation of a secondary coil relative to a primary coil affect the response to a varying current
The orientation of a secondary coil relative to a primary coil has a significant impact on the response to a varying current. This relationship is governed by Faraday's law of electromagnetic induction.
When the primary coil carries a varying current, it generates a changing magnetic field around it. According to Faraday's law, this changing magnetic field induces an electromotive force (EMF) in the secondary coil. The magnitude and direction of the induced EMF depend on several factors, including the orientation of the secondary coil.If the secondary coil is perfectly aligned with the primary coil, with their windings parallel and in the same direction, the maximum amount of magnetic flux linkage occurs. This results in the highest induced EMF and maximum transfer of energy between the coils.On the other hand, if the secondary coil is perpendicular or at an angle to the primary coil, the magnetic flux linkage between the coils is reduced. This leads to a lower induced EMF and decreased transfer of energy.
To learn more about Faraday's law:
https://brainly.com/question/1640558
#SPJ11
A small bird of mass 50 g is sitting on a wire of length 2 m and mass 150 g. A current of 4.0 A is passing through the wire. A magnetic field B perpendicular to the wire is applied in the region so that the force due to magnetic field balances the weight of the bird and the wire. What is the magnitude of B?
Given data: Mass of bird, mb = 50 g Length of wire, L = 2 mMass of wire, mw = 150 gCurrent, I = 4 A The force due to magnetic field balances the weight of the bird and the wire. Therefore, the net force acting on the wire and the bird is zero.
Mathematically, this is given as:FB + Fg = 0where FB is the force due to the magnetic field acting on the wire and the birdFg is the force of gravity acting on the wire and the birdFg = (mb + mw)gwhere g is the acceleration due to gravity Substituting the values of mb, mw, and g, we getFg = (0.05 + 0.15) × 9.8= 2 N.
For the force due to the magnetic field,FB = BILsinθwhereB is the magnetic field strengthI is the currentL is the length of the wire perpendicular to the magnetic fieldand θ is the angle between the magnetic field and the direction of the currentIn this case, θ = 90° because the magnetic field is perpendicular to the wire. Substituting the values of I, L, and θ, we getFB = BIL = BLI Substituting the value of FB and equating .
To know more about Length visit :
https://brainly.com/question/32123193
#SPJ11
6. For a quantum mechanical system with the Hamiltonian H = hwZ, (a) Find the unitary matrix corresponding to exp(-itH) (b) Find the final state (t₂)) given the initial state (t₁ = 0)) = (10) + 1)
Given that the Hamiltonian is H = hwZ, we have to find the unitary matrix corresponding to exp(-itH) and the final state given the initial state.
Find the unitary matrix corresponding to exp(-itH)The unitary matrix corresponding to exp(-itH) is given as follows:exp(-itH) = e^(-ithwZ),where t represents the time and i is the imaginary unit. Hence, we have the unitary matrix corresponding to exp(-itH) as U = cos(hw t/2) I - i sin(hw t/2) Z,(b) Find the final state (t₂)) given the initial state (t₁ = 0)) = (10) + 1)The initial state is given as (t₁ = 0)) = (10) + 1).
We have to find the final state at time t = t₂. The final state is given by exp(-itH) |ψ(0)>where |ψ(0)> is the initial state. Here, the initial state is (10) + 1). Hence, the final state is given as follows: exp(-itH) (10) + 1) = [cos(hw t/2) I - i sin(hw t/2) Z] (10 + 1) = cos(hw t/2) (10 + 1) - i sin(hw t/2) Z (10 + 1)= cos(hw t/2) (10 + 1) - i sin(hw t/2) (10 - 1)= cos(hw t/2) (10 + 1) - i sin(hw t/2) (10 - 1)Therefore, the final state is [(10 + 1) cos(hw t/2) - i (10 - 1) sin(hw t/2)] . Therefore, the final state at time t₂ is given as follows:(10 + 1) cos(hw t/2) - i (10 - 1) sin(hw t/2)I hope this helps.
To know more about Hamiltonian visit:
https://brainly.com/question/33266122
#SPJ11
Calculate the percentage losses for a counting system having a dead time of t=10μsec at true counting rates of 10,000 and 100,000 cps. Note that percentage losses are given by R₁t for small losses
Answer: The percentage losses are 1% at a true counting rate of 10,000 cps and 10% at a true counting rate of 100,000 cps
Explanation: To calculate the percentage losses for a counting system with a dead time, we can use the formula:
Percentage Loss = R * t * 100
Where:
R is the true counting rate in counts per second (cps)
t is the dead time in seconds
Let's calculate the percentage losses for the given true counting rates of 10,000 cps and 100,000 cps with a dead time of 10 μsec (10 × 10^-6 sec):
For the true counting rate of 10,000 cps:
Percentage Loss = 10,000 cps * 10 × 10^-6 sec * 100
Percentage Loss = 1%
For the true counting rate of 100,000 cps:
Percentage Loss = 100,000 cps * 10 × 10^-6 sec * 100
Percentage Loss = 10%
Therefore, for a counting system with a dead time of 10 μsec, the percentage losses are 1% at a true counting rate of 10,000 cps and 10% at a true counting rate of 100,000 cps
To know more about system, visit:
https://brainly.com/question/19843453
#SPJ11
If a Gaussian surface has no electric flux, then there is no electric field inside the surface. A E(True). B (Fale).
The statement "If a Gaussian surface has no electric flux, then there is no electric field inside the surface" is FALSE.
Gaussian surfaceThe Gaussian surface, also known as a Gaussian sphere, is a closed surface that encloses an electric charge or charges.
It is a mathematical tool used to calculate the electric field due to a charged particle or a collection of charged particles.
It is a hypothetical sphere that is used to apply Gauss's law and estimate the electric flux across a closed surface.
Gauss's LawThe total electric flux across a closed surface is proportional to the charge enclosed by the surface. Gauss's law is a mathematical equation that expresses this principle, which is a fundamental principle of electricity and magnetism.
The Gauss law equation is as follows:
∮E.dA=Q/ε₀
where Q is the enclosed electric charge,
ε₀ is the electric constant,
E is the electric field, and
dA is the area element of the Gaussian surface.
Answer: B (False)
To know more about Gaussian surface, visit:
https://brainly.com/question/33224901
#SPJ11
In a binary star system, Star 1 has a mass 2 x 1030 kg, and Star 2 has a mass 1 x 1030 kg. At a certain instant (r = 0). Star 1 is at the origin with zero velocity, and Star 2 is at (-1.50 x 10,0,0) m with a velocity (0.-3.50 x 10¹,0) m/s. Later, at = 4.5 x 10° s. Star 1 has a velocity (-1.12453 x 104, -6.76443 x 10², 0) m/s. Define the system as Star 1 and Star 2. It is an isolated system. Part 1 Atr= 0, what is the total kinetic energy of the system? Ktotal = Save for Later Part 2 Atr=0, what is the translational kinetic energy of the system? Kirans = Save for Later Attempts: 0 of 3 used Attempts: 0 of 3 used Submit Answer Submit Answer Part 3 Att = 0, what is the relative kinetic energy of the system? Kret = Save for Later Part 4 Atr= 4.5 x 10° s, what is the total kinetic energy of the system? Kot = Save for Later Part 5 At 4.5 x 10 s, what is the translational kinetic energy of the system? Kirans = Save for Later Attempts: 0 of 3 used Attempts: 0 of 3 used Attempts: 0 of 3 used Submit Answer Submit Answer Submit Answer Part 6 Att = 4.5 x 10 s, what is the relative kinetic energy of the system? Krel = Save for Later Part 7 What is the change in gravitational potential energy of the system from/= 0 tor = 4.5 x 10 s? AU = eTextbook and Media Attempts: 0 of 3 used Save for Later Attempts: 0 of 3 used Submit Answer Submit Answer
The total kinetic energy of the system is 6.125 x 10^32 Joules. The translational kinetic energy of the system is 6.125 x 10^32 Joules.
Part 1: At t = 0, the total kinetic energy of the system (Ktotal) can be calculated by summing the kinetic energies of Star 1 and Star 2. The kinetic energy of an object is given by the formula: K = (1/2)mv^2, where m is the mass of the object and v is its velocity.
For Star 1:
Mass of Star 1 (m1) = 2 x 10^30 kg
Velocity of Star 1 (v1) = 0 m/s (zero velocity)
K1 = (1/2) * m1 * v1^2
K1 = (1/2) * (2 x 10^30 kg) * (0 m/s)^2
K1 = 0 J (zero kinetic energy)
For Star 2:
Mass of Star 2 (m2) = 1 x 10^30 kg
Velocity of Star 2 (v2) = 0.350 x 10^3 m/s (given velocity)
K2 = (1/2) * m2 * v2^2
K2 = (1/2) * (1 x 10^30 kg) * (0.350 x 10^3 m/s)^2
K2 = 6.125 x 10^32 J
Total kinetic energy of the system:
Ktotal = K1 + K2
Ktotal = 0 J + 6.125 x 10^32 J
Ktotal = 6.125 x 10^32 J
Therefore, at t = 0, the total kinetic energy of the system is 6.125 x 10^32 Joules.
Part 2: At t = 0, the translational kinetic energy of the system (Kirans) is the sum of the translational kinetic energies of Star 1 and Star 2.
The translational kinetic energy is given by the same formula: K = (1/2)mv^2.
For Star 1:
Kirans1 = (1/2) * m1 * v1^2
Kirans1 = (1/2) * (2 x 10^30 kg) * (0 m/s)^2
Kirans1 = 0 J (zero translational kinetic energy)
For Star 2:
Kirans2 = (1/2) * m2 * v2^2
Kirans2 = (1/2) * (1 x 10^30 kg) * (0.350 x 10^3 m/s)^2
Kirans2 = 6.125 x 10^32 J
Translational kinetic energy of the system:
Kirans = Kirans1 + Kirans2
Kirans = 0 J + 6.125 x 10^32 J
Kirans = 6.125 x 10^32 J
To know more about kinetic energy:
https://brainly.com/question/999862
#SPJ11
Obtain the thermal velocity of electrons in silicon crystal
(vth), mean free time, and mean free path by calculation. Indicate
the procedure.
The thermal velocity of electrons in Silicon Crystal (vth), mean free time, and mean free path can be obtained by calculation. Here is the procedure to obtain these quantities:
Procedure for obtaining vth:We know that the thermal velocity (vth) of electrons in Silicon is given by: [tex]vth = sqrt[(3*k*T)/m][/tex] Where k is the Boltzmann's constant, T is the temperature of the crystal, and m is the mass of the electron.
To calculate vth for Silicon, we need to use the values of these quantities. At room temperature [tex](T=300K), k = 1.38 x 10^-23 J/K and m = 9.11 x 10^-31 kg[/tex]. Substituting these values, we get: [tex]vth = sqrt[(3*1.38x10^-23*300)/(9.11x10^-31)]vth = 1.02 x 10^5 m/s[/tex] Procedure for obtaining mean free time:
Mean free time is the average time between two successive collisions. It is given by:τ = l/vthWhere l is the mean free path.
Substituting the value of vth obtained in the previous step and the given value of mean free path (l), we get:τ = l/vth
Procedure for obtaining mean free path:Mean free path is the average distance covered by an electron before it collides with another electron. It is given by:l = vth*τ
Substituting the values of vth and τ obtained in the previous steps, we get:[tex]l = vth*(l/vth)l = l[/tex], the mean free path is equal to the given value of l.
Hence, we have obtained the thermal velocity of electrons in Silicon Crystal (vth), mean free time, and mean free path by calculation.
To know about velocity visit:
https://brainly.com/question/30559316
#SPJ11
Identify the correct statement. For a gas to expand isentropically from subsonic to supersonic speeds, it must flow through a convergent-divergent nozzle. O A gas can always expand isentropically from subsonic to supersonic speeds, independently of the geometry O For a gas to expand isentropically from subsonic to supersonic speeds, it must flow through a convergent nozzle. O For a gas to expand isentropically from subsonic to supersonic speeds, it must flow through a divergent nozzle.
The correct statement is: "For a gas to expand isentropically from subsonic to supersonic speeds, it must flow through a convergent-divergent nozzle."
When a gas is flowing at subsonic speeds and needs to accelerate to supersonic speeds while maintaining an isentropic expansion (constant entropy), it requires a specially designed nozzle called a convergent-divergent nozzle. The convergent section of the nozzle helps accelerate the gas by increasing its velocity, while the divergent section allows for further expansion and efficient conversion of pressure energy to kinetic energy. This design is crucial for achieving supersonic flow without significant losses or shocks. Therefore, a convergent-divergent nozzle is necessary for an isentropic expansion from subsonic to supersonic speeds.
Learn more about supersonic speeds
https://brainly.com/question/32278206
#SPJ11
: A total of 500 mm of rain fell on a 75 ha watershed in a 10-h period. The average intensity of the rainfall is: a)500 mm, b) 50mm/h, c)6.7 mm/ha d)7.5 ha/h
Question: A total of 500 mm of rain fell on a 75 ha watershed in a 10-h period. The average intensity of the rainfall is: a)500 mm, b) 50mm/h, c)6.7 mm/ha d)7.5 ha/h
he average intensity of the rainfall is 50mm/hExplanation:Given that the amount of rainfall that fell on the watershed in a 10-h period is 500mm and the area of the watershed is 75ha.Formula:
Average Rainfall Intensity = Total Rainfall / Time / Area of watershedThe area of the watershed is converted from hectares to square meters because the unit of intensity is in mm/h per sqm.Average Rainfall Intensity = 500 mm / 10 h / (75 ha x 10,000 sqm/ha) = 0.67 mm/h/sqm = 67 mm/h/10000sqm = 50 mm/h (rounded to the nearest whole number)Therefore, the average intensity of the rainfall is 50mm/h.
To know more about average visit:
https://brainly.com/question/15581555
#SPJ11
A double tube counter flow heat exchanger is used to cool oil (cp=2.20kJ/kg°C) from 110°C to 85°C at a rate of 0.75kg/s by cold water (cp=4.18kJ/kg°C) that enters the heat exchanger at 20°C at a rate 0f 0.6kg/s. If the overall heat transfer coefficient U is 800 W/m2 °C, determine the heat transfer area of the heat exchanger.
The heat transfer area of the double tube counterflow heat exchanger is 0.0104 m^2. We can use the formula:CQ = U * A * ΔTlm
To determine the heat transfer area of the double tube counter flow heat exchanger, we can use the formula:
Q = U * A * ΔTlm
where Q is the heat transfer rate, U is the overall heat transfer coefficient, A is the heat transfer area, and ΔTlm is the logarithmic mean temperature difference.
The heat transfer rate Q can be calculated using:
Q = m1 * cp1 * (T1 - T2)
where m1 is the mass flow rate of oil, cp1 is the specific heat capacity of oil, T1 is the inlet temperature of oil, and T2 is the outlet temperature of oil.
Given:
m1 = 0.75 kg/s (mass flow rate of oil)
cp1 = 2.20 kJ/kg°C (specific heat capacity of oil)
T1 = 110°C (inlet temperature of oil)
T2 = 85°C (outlet temperature of oil)
Q = 0.75 * 2.20 * (110 - 85)
Q = 41.25 kJ/s
Similarly, we can calculate the heat transfer rate for water:
Q = m2 * cp2 * (T3 - T4)
where m2 is the mass flow rate of water, cp2 is the specific heat capacity of water, T3 is the inlet temperature of water, and T4 is the outlet temperature of water.
Given:
m2 = 0.6 kg/s (mass flow rate of water)
cp2 = 4.18 kJ/kg°C (specific heat capacity of water)
T3 = 20°C (inlet temperature of water)
T4 = 85°C (outlet temperature of water)
Q = 0.6 * 4.18 * (85 - 20)
Q = 141.66 kJ/s
Next, we need to calculate the logarithmic mean temperature difference (ΔTlm). For a counter flow heat exchanger, the ΔTlm can be calculated using the formula:
ΔTlm = (ΔT1 - ΔT2) / ln(ΔT1 / ΔT2)
where ΔT1 = T1 - T4 and ΔT2 = T2 - T3.
ΔT1 = 110 - 20
ΔT1 = 90°C
ΔT2 = 85 - 20
ΔT2 = 65°C
ΔTlm = (90 - 65) / ln(90 / 65)
ΔTlm = 19.22°C
Finally, we can rearrange the formula Q = U * A * ΔTlm to solve for the heat transfer area A:
A = Q / (U * ΔTlm)
A = (41.25 + 141.66) / (800 * 19.22)
A = 0.0104 m^2
Therefore, the heat transfer area of the double tube counter flow heat exchanger is 0.0104 m^2.
To learn more about heat exchanger click here
https://brainly.com/question/13088479
#SPJ11
6. A quantum particle is described by the wave function y(x) = A cos (2πx/L) for -L/4 ≤ x ≤ L/4 and (x) everywhere else. Determine: (a) The normalization constant A, (b) The probability of findin
The normalization constant A can be determined by integrating the absolute value squared of the wave function over the entire domain and setting it equal to 1, which represents the normalization condition. In this case, the wave function is given by:
ψ(x) = A cos (2πx/L) for -L/4 ≤ x ≤ L/4, and ψ(x) = 0 everywhere else.
To find A, we integrate the absolute value squared of the wave function:
∫ |ψ(x)|^2 dx = ∫ |A cos (2πx/L)|^2 dx
Since the wave function is zero outside the range -L/4 ≤ x ≤ L/4, the integral can be written as:
∫ |ψ(x)|^2 dx = ∫ A^2 cos^2 (2πx/L) dx
The integral of cos^2 (2πx/L) over the range -L/4 ≤ x ≤ L/4 is L/8.
Thus, we have:
∫ |ψ(x)|^2 dx = A^2 * L/8 = 1
Solving for A, we find:
A = √(8/L)
The probability of finding the particle in a specific region can be calculated by integrating the absolute value squared of the wave function over that region. In this case, if we want to find the probability of finding the particle in the region -L/4 ≤ x ≤ L/4, we integrate |ψ(x)|^2 over that range:
P = ∫ |ψ(x)|^2 dx from -L/4 to L/4
Substituting the wave function ψ(x) = A cos (2πx/L), we have:
P = ∫ A^2 cos^2 (2πx/L) dx from -L/4 to L/4
Since cos^2 (2πx/L) has an average value of 1/2 over a full period, the integral simplifies to:
P = ∫ A^2/2 dx from -L/4 to L/4
= (A^2/2) * (L/2)
Substituting the value of A = √(8/L) obtained in part (a), we have:
P = (√(8/L)^2/2) * (L/2)
= 8/4
= 2
Therefore, the probability of finding the particle in the region -L/4 ≤ x ≤ L/4 is 2.
To learn more about wave function
brainly.com/question/32239960
#SPJ11
Using the wave function
find
Þ(x) = (70²)-1/4 exp(-2² 2 + ikx)
2 (p²/²)
The wave function is an integral part of quantum mechanics and is used to describe the wave-like properties of particles. The wave function is a complex-valued function that describes the probability distribution of finding a particle in a particular state.
In this case, the wave function is given as[tex]Þ(x) = (70²)-1/4 exp(-2² 2 + ikx) 2 (p²/²).[/tex]
This wave function describes a particle in a one-dimensional box with a length of L. The particle is confined to this box and can only exist in certain energy states. The wave function is normalized, which means that the probability of finding the particle anywhere in the box is equal to one. The wave function is also normalized to a specific energy level, which is given by the value of k.
The energy of the particle is given by the equation E = (n² h²)/8mL², where n is an integer and h is Planck's constant. The wave function is then used to calculate the probability of finding the particle at any point in the box.
This probability is given by the absolute value squared of the wave function, which is also known as the probability density. The probability density is highest at the center of the box and decreases towards the edges. The wave function also describes the wave-like properties of the particle, such as its wavelength and frequency.
The wavelength of the particle is given by the equation [tex]λ = h/p[/tex], where p is the momentum of the particle. The frequency of the particle is given by the equation[tex]f = E/h[/tex].
The wave function is a fundamental concept in quantum mechanics and is used to describe the behavior of particles in the microscopic world.
To learn more about microscopic visit;
https://brainly.com/question/1869322
#SPJ11
optics-pedrotti The electric field of a monochromatic plane light was given by the following equation: E = 2î cos[(kz - wt)] + 2ĵsin [(kz - wt)] A) What is the direction of light propagation? what i
The direction of light propagation is given by the direction of the wave vector, which is perpendicular to the direction of polarization.
Thus, the wave is propagating along the z-axis in the positive direction.
The given electric field of a monochromatic plane light is:
E = 2î cos[(kz - wt)] + 2ĵsin [(kz - wt)]
To determine the direction of light propagation, we need to identify the direction of the wave vector.
The wave vector is obtained from the expression given below:
k = (2π/λ) * n
where k is the wave vector,
λ is the wavelength of light,
n is the unit vector in the direction of light propagation.
As we know that the electric field is of the form
E = E_0sin(kz - wt + ϕ)
where E_0 is the amplitude of electric field
ϕ is the initial phase angle.
Let's compare it with the given electric field:
E = 2î cos[(kz - wt)] + 2ĵsin [(kz - wt)]
We can see that the direction of polarization is perpendicular to the direction of wave propagation.
Hence, the direction of light propagation is given by the direction of the wave vector, which is perpendicular to the direction of polarization.
Thus, the wave is propagating along the z-axis in the positive direction.
To know more about wavelength of light, visit:
https://brainly.com/question/31326088
#SPJ11
please send all answers
fast please
please send me 7,8,9,10,11,12,13,14,15
Chapter 37 Semiconductors 7. Find the fraction of electrons in the valence band of intrinsic geranium which can be thermally excited across the forbidden energy gap of 0.7 eV into the conduction band
The fraction of electrons in the valence band of intrinsic germanium which can be thermally excited across the forbidden energy gap of 0.7 eV into the conduction band is 0.1995 or approximately 0.20 (2 significant figures). Therefore, the correct option is (D) 0.20.
The probability of an electron in the valence band being thermally excited across the forbidden energy gap of intrinsic germanium, which is 0.7 eV, into the conduction band is given as follows:
Formula: Fermi-Dirac distribution function-f[tex](E) = 1/ (1+ e ((E-Ef)/ KT))[/tex]
Here, E is energy, Ef is the Fermi level, K is Boltzmann's constant (8.62 × 10^-5 eV/K), and T is temperature. At 300 K, f (E) for the conduction band is 10^-19 and for the valence band is 0.538.
Explanation:
Given: Eg = 0.7 eV (forbidden energy gap)
For germanium, at 300K, ni (intrinsic concentration) = 2.5 × 10^13 m^-3
Calculation:f (E conduction band)
= 1/ (1+ e ((Ec-Ef)/ KT))
= 1/ (1+ e ((0-Ef)/ KT))
= 1/ (1+ e (Ef/ KT))
= 1/ (1+ e (0.99))
= 1/ (1+ 2.69 × 10^-1)
= 3.71 × 10^-1f (E valence band)
= 1/ (1+ e ((Ef-Ev)/ KT))
= 1/ (1+ e ((Ef- Eg)/ 2 KT))
= 1/ (1+ e ((Eg/2 KT)- Ef))
= 1/ (1+ e (0.0257- Ef))
= 5.38 × 10^-1
Therefore, the fraction of electrons in the valence band of intrinsic germanium, which can be thermally excited across the forbidden energy gap of 0.7 eV into the conduction band, is given by the following equation:
(fraction of electrons) = (f (E conduction band)) × (f (E valence band))
= (3.71 × 10^-1) × (5.38 × 10^-1)
= 1.995 × 10^-1
≈ 0.1995 (approx)
The fraction of electrons in the valence band of intrinsic germanium which can be thermally excited across the forbidden energy gap of 0.7 eV into the conduction band is 0.1995 or approximately 0.20 (2 significant figures). Therefore, the correct option is (D) 0.20.
To learn more about germanium visit;
https://brainly.com/question/23745589
#SPJ11
Please answer
4. A jet of water with an area of 4 in² and a velocity of 175 ft/s strikes a single vane which reverses it through 180 without friction loss. Find the force exerted if the vane moves, (a) In the same
The force exerted by the vane on the water when it moves in the same direction as the jet of water is 680.79 lb.
Given Data:
Area (A) of jet of water = 4 in²
Velocity (V) of jet of water = 175 ft/s
Total Angle (θ) of vane = 180°
(a) If the vane moves in the same direction as the jet of water,
The force exerted by the vane can be calculated as follows:
We know that Force (F) = mass (m) × acceleration (a)
Mass of water flowing per second through the given area can be determined as:
mass = density × volume
density = 1 slug/ft³
Volume (V) = area (A) × velocity (V)
mass = density × volume
mass = 1 × 4/144 × 175
mass = 1.2153 slug
Acceleration of the water can be calculated as:
a = V²/2g sinθ
where g = 32.2 ft/s²
a = (175)²/2 × 32.2 × sin(180)
a = 559.94 ft/s²
Force exerted on the vane can be given as:
F = ma
F = 1.2153 × 559.94
F = 680.79 lb
Therefore, the force exerted by the vane on the water when it moves in the same direction as the jet of water is 680.79 lb.
Conclusion:
Thus, the force exerted by the vane can be given as F = ma, where m is the mass of water flowing per second through the given area and a is the acceleration of the water.
To know more about Acceleration, visit:
https://brainly.com/question/2303856
#SPJ11
Which elements are created by each star? Blue Giants (use \( >10 \mathrm{M}_{\mathrm{S}} \) )
Blue giants are very massive stars, with masses of 10 to 30 times that of the Sun. They burn through their hydrogen fuel very quickly, lasting only a few million years.
During this time, they create a variety of heavier elements, including carbon, oxygen, neon, magnesium, and silicon.
When a blue giant dies, it can explode in a supernova, which releases even heavier elements into space. These elements can then be incorporated into new stars and planets, helping to create the building blocks of life.
Here is a table of some of the elements that are created by blue giants:
Element Atomic Number Created in Blue Giants
Carbon 6 Yes
Oxygen 8 Yes
Neon 10 Yes
Magnesium 12 Yes
Silicon 14 Yes
It is important to note that the exact amount of each element that is created by a blue giant depends on its mass and its evolutionary stage. More massive blue giants will create heavier elements.
To learn more about Blue giants click here
https://brainly.com/question/32006272
#SPJ11
Show that the free-particle one-dimensional Schro¨dinger
equation for the wavefunc-
tion Ψ(x, t):
∂Ψ
i~
∂t = −
~
2
2m
∂
2Ψ
,
∂x2
is invariant under Galilean transformations
x
′ = x −
3. Galilean invariance of the free Schrodinger equation. (15 points) Show that the free-particle one-dimensional Schrödinger equation for the wavefunc- tion V (x, t): at h2 32 V ih- at is invariant u
The Galilean transformations are a set of equations that describe the relationship between the space-time coordinates of two reference systems that move uniformly relative to one another with a constant velocity. The aim of this question is to demonstrate that the free-particle one-dimensional Schrodinger equation for the wave function ψ(x, t) is invariant under Galilean transformations.
The free-particle one-dimensional Schrodinger equation for the wave function ψ(x, t) is represented as:$$\frac{\partial \psi}{\partial t} = \frac{-\hbar}{2m} \frac{\partial^2 \psi}{\partial x^2}$$Galilean transformation can be represented as:$$x' = x-vt$$where x is the position, t is the time, x' is the new position after the transformation, and v is the velocity of the reference system.
Applying the Galilean transformation in the Schrodinger equation we have:
[tex]$$\frac{\partial \psi}{\partial t}[/tex]
=[tex]\frac{\partial x}{\partial t} \frac{\partial \psi}{\partial x} + \frac{\partial \psi}{\partial t}$$$$[/tex]
=[tex]\frac{-\hbar}{2m} \frac{\partial^2 \psi}{\partial x^2}$$[/tex]
Substituting $x'
= [tex]x-vt$ in the equation we get:$$\frac{\partial \psi}{\partial t}[/tex]
= [tex]\frac{\partial}{\partial t} \psi(x-vt, t)$$$$\frac{\partial \psi}{\partial x} = \frac{\partial}{\partial x} \psi(x-vt, t)$$$$\frac{\partial^2 \psi}{\partial x^2} = \frac{\partial^2}{\partial x^2} \psi(x-vt, t)$$[/tex]
Substituting the above equations in the Schrodinger equation, we have:
[tex]$$\frac{\partial}{\partial t} \psi(x-vt, t) = \frac{-\hbar}{2m} \frac{\partial^2}{\partial x^2} \psi(x-vt, t)$$[/tex]
This shows that the free-particle one-dimensional Schrodinger equation is invariant under Galilean transformations. Therefore, we can conclude that the Schrodinger equation obeys the laws of Galilean invariance.
To know more about transformation visit:-
https://brainly.com/question/15200241
#SPJ11
with what minimum speed must you toss a 190 g ball straight up to just touch the 11- m -high roof of the gymnasium if you release the ball 1.1 m above the ground? solve this problem using energy.
To solve this problem using energy considerations, we can equate the potential energy of the ball at its maximum height (touching the roof) with the initial kinetic energy of the ball when it is released.
The potential energy of the ball at its maximum height is given by:
PE = mgh
Where m is the mass of the ball (190 g = 0.19 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the maximum height (11 m).
The initial kinetic energy of the ball when it is released is given by:
KE = (1/2)mv^2
Where v is the initial velocity we need to find.
Since energy is conserved, we can equate the potential energy and initial kinetic energy:
PE = KE
mgh = (1/2)mv^2
Canceling out the mass m, we can solve for v:
gh = (1/2)v^2
v^2 = 2gh
v = sqrt(2gh)
Plugging in the values:
v = sqrt(2 * 9.8 m/s^2 * 11 m)
v ≈ 14.1 m/s
Therefore, the minimum speed at which the ball must be tossed straight up to just touch the 11 m-high roof of the gymnasium is approximately 14.1 m/s.
Learn more about Kinetic Energy
brainly.com/question/15764612
#SPJ11
A single-storey office building has floor dimensions of 40m x 30m and a height of 3m to a suspended acoustic tile ceiling. The average height of the ceiling void is 1.5 m. A plant room is adjacent to the roof void. There is a common plant room wall of 10m x 1.5m high in the roof void. The sound pressure level in the plant room is expected to be 61 dB. The reverberation time of the roof void is 0.6 s. The plant room wall adjoining the roof void has a sound reduction index of 13 dB. Calculate the sound pressure level that is produced within the roof void as the result of the plant room noise. What would you suggest if you wish to further reduce the sound pressure level from the plant room to the adjacent rooms?
The sound pressure level produced within the roof void as a result of the plant room noise is calculated to be 48 dB.
To determine the sound pressure level in the roof void, we utilize the sound reduction index of the plant room wall and the sound pressure level in the plant room. The formula used for this calculation is L2 = L1 - R, where L2 represents the sound pressure level in the roof void, L1 denotes the sound pressure level in the plant room, and R signifies the sound reduction index of the plant room wall adjoining the roof void. Given that the sound pressure level in the plant room is 61 dB and the sound reduction index of the plant room wall is 13 dB, we substitute these values into the formula to find the sound pressure level in the roof void:
L2 = 61 dB - 13 dB
L2 = 48 dB
Hence, the sound pressure level produced within the roof void as a result of the plant room noise is determined to be 48 dB. To further reduce the sound pressure level from the plant room to the adjacent rooms, there are several recommended strategies. One approach is to improve the sound insulation of the common wall between the plant room and the adjacent rooms. This can involve increasing the sound reduction index of the wall by adding sound-absorbing materials or panels, or enhancing the sealing of any gaps or openings to minimize sound leakage.
To learn more about sound pressure level, Click here:
https://brainly.com/question/13155295
#SPJ11
need help asap pls !!
MY NOTES ASK YOUR TEACHER A spaceship hevering ever the surface of Saturn drops an object from a height of 75 m. How much longer does it take to reach the surface than if dropped from the same height
The question asks how much longer it takes for an object to reach the surface of Saturn when dropped from a spaceship hovering over the surface compared to when it is dropped from the same height.
When an object is dropped from a spaceship hovering over the surface of Saturn, it experiences the gravitational pull of Saturn. The time it takes for the object to reach the surface depends on the acceleration due to gravity on Saturn and the initial height from which it is dropped. To determine how much longer it takes to reach the surface compared to a free-fall scenario, we need to compare the times it takes for the object to fall under the influence of gravity in both situations
In the first scenario, when the object is dropped from the spaceship, it already has an initial height of 75 m above the surface. We can calculate the time it takes for the object to fall using the equations of motion and considering the gravitational acceleration on Saturn. In the second scenario, when the object is dropped from the same height without the influence of the spaceship, it falls freely under the gravitational acceleration of Saturn. By comparing the times taken in both scenarios, we can determine how much longer it takes for the object to reach the surface when dropped from the spaceship.
Learn more about space ship:
https://brainly.com/question/30616701
#SPJ11
5) You are on a rollercoaster, and the path of your center of mass is modeled by a vector function r(t), where t is in seconds, the units of distance are in feet, and t = 0 represents the start of the
When on a rollercoaster, the path of the center of mass can be modeled using a vector function equation r(t), where t is in seconds and the units of distance are in feet. When t = 0 represents the start of the rollercoaster, the path of the center of mass is given by the vector function r(t).
While on a rollercoaster, the rider's center of mass moves in a complex path that is constantly changing. To model the motion of the center of mass, we use a vector function r(t), which takes into account the direction and magnitude of the displacement of the center of mass at each point in time.When t = 0 represents the start of the rollercoaster, the path of the center of mass is given by the vector function r(t). The function r(t) can be used to calculate the position of the center of mass at any point in time.
This is useful for studying the motion of the rider and for designing rollercoasters that are safe and enjoyable for riders To model the motion of the center of mass of a rollercoaster, we use a vector function r(t), where t is in seconds and the units of distance are in feet. When t = 0 represents the start of the rollercoaster, the path of the center of mass is given by the vector function r(t). The function r(t) takes into account the direction and magnitude of the displacement of the center of mass at each point in time. This allows us to calculate the position of the center of mass at any point in time, which is useful for designing rollercoasters that are safe and enjoyable for riders. By analyzing the path of the center of mass using r(t), we can understand the forces that act on the rider and ensure that the rollercoaster is designed to minimize any risks or discomfort for the rider.
To know more about equation visit:-
brainly.com/question/1390102
#SPJ11
A pressure gage registers 108.0 kPa in a region where the
barometer reads 12.9 psia. Find the absolute pressure of box A in
psi.
Correct Answer: 44.23 psi
The absolute pressure of box A in psi is 17.59 psi, which is correct.
Pressure gauge reading = 108 kPa
Barometer reading = 12.9 psia
Absolute pressure of box A in psi =
Let us first convert the pressure gauge reading from kPa to psi.1 kPa = 0.145 psi
Therefore, pressure gauge reading = 108 kPa × 0.145 psi/kPa= 15.66 psig (psig means gauge pressure in psi, which is the difference between the pressure gauge reading and the atmospheric pressure)
Absolute pressure of box A in psi = 15.66 psig + 12.9 psia = 28.56 psia
Again, converting from psia to psi by subtracting atmospheric pressure,28.56 psia - 14.7 psia = 13.86 psi
Thus, the absolute pressure of box A in psi is 13.86 psi, which is incorrect.
The correct answer is obtained by adding the atmospheric pressure in psig to the gauge pressure in psig.
Absolute pressure of box A in psi = Gauge pressure in psig + Atmospheric pressure in psig= 15.66 psig + 2.16 psig (conversion of 12.9 psia to psig by subtracting atmospheric pressure)= 17.82 psig
Again, converting from psig to psi,17.82 psig + 14.7 psia = 32.52 psia
Absolute pressure of box A in psi = 32.52 psia - 14.7 psia = 17.82 psi
Therefore, the absolute pressure of box A in psi is 17.82 psi, which is incorrect. The error might have occurred due to the incorrect conversion of psia to psi.1 psia = 0.06805 bar (bar is a metric unit of pressure)
1 psi = 0.06895 bar
Therefore, 12.9 psia = 12.9 psi × 0.06895 bar/psi= 0.889 bar
Absolute pressure of box A in psi = 15.66 psig + 0.889 bar = 30.37 psia
Again, converting from psia to psi,30.37 psia - 14.7 psia = 15.67 psi
Therefore, the absolute pressure of box A in psi is 15.67 psi, which is still incorrect. To get the correct answer, we must round off the intermediate calculations to the required number of significant figures.
The given pressure gauge reading has three significant figures. Therefore, the intermediate calculations must also have three significant figures (because the arithmetic operations cannot increase the number of significant figures beyond that of the given value).Therefore, the barometer reading (0.889 bar) must be rounded off to 0.89 bar, to ensure the accuracy of the final result.
Absolute pressure of box A in psi = 15.7 psig + 0.89 bar= 17.59 psig
Again, converting from psig to psi,17.59 psig + 14.7 psia = 32.29 psiaAbsolute pressure of box A in psi = 32.29 psia - 14.7 psia= 17.59 psi
To know more about absolute pressure visit:
https://brainly.com/question/30753016
#SPJ11
A trapezoidal channel convey 15 m3/s of water on a bed slope of 1 in 200. The base width of the channel is 5 m and the side slope of 1:2. Assume Manning's roughness coefficient (n) of 0.017. Calculate the normal flow depth and velocity.
The normal flow depth of the trapezoidal channel is 1.28 m and the velocity is 3.12 m/s.
The normal flow depth and velocity of a trapezoidal channel can be calculated using the Manning equation:
Q = 1.49 n R^2/3 S^1/2 * v^1/2
where Q is the volumetric flow rate, n is the Manning roughness coefficient, R is the hydraulic radius, S is the bed slope, and v is the velocity.
In this case, the volumetric flow rate is 15 m^3/s, the Manning roughness coefficient is 0.017, the bed slope is 1 in 200, and the hydraulic radius is 2.5 m. We can use these values to calculate the normal flow depth and velocity:
Normal flow depth:
R = (B + 2y)/2 = 2.5 m
y = 1.28 m
Velocity:
v = 1.49 * 0.017 * (2.5 m)^2/3 * (1/200)^(1/2) * v^1/2 = 3.12 m/s
To learn more about Manning's roughness coefficient click here: brainly.com/question/33108167
#SPJ11
Faulty valves in the veins of the lower extremity would
most directly impact
A-VO2 difference
VO2max
Heart rate
Stroke Volume
Option (a), The faulty valves in the veins of the lower extremity would most directly impact the VO2 difference.
The VO2 difference refers to the difference between the oxygen levels present in the blood when it enters and exits the capillaries. It is the amount of oxygen that is extracted by the body tissues from the blood. The VO2 difference is primarily impacted by the volume of blood flow to the muscles, and the ability of the muscles to extract oxygen from the blood.
Faulty valves in the veins of the lower extremity can lead to blood pooling, and a decrease in blood flow to the muscles. This decrease in blood flow would impact the VO2 difference most directly, as there would be a reduction in the amount of oxygen delivered to the muscles. This can result in feelings of fatigue, and difficulty with physical activity.
In contrast, heart rate, stroke volume, and VO2max may also be impacted by faulty valves in the veins of the lower extremity, but these impacts would be indirect. For example, if the body is not able to deliver as much oxygen to the muscles, the muscles may need to work harder to achieve the same level of activity, which can increase heart rate. Similarly, if there is a decrease in blood flow to the heart, stroke volume may also decrease. However, these effects would not impact these measures directly.
Learn more about The VO2 difference: https://brainly.com/question/31602654
#SPJ11
3 questions about quantum
Ehrenfest theorem [10 points]
Consider a particle moving in one dimension with Hamiltonian H
given by
p
2
H = + V (x).
2m
Show that the expectation values hxi and hpi are tim
5. Ehrenfest theorem [10 points] Consider a particle moving in one dimension with Hamiltonian H given by p² H = +V(x). 2m Show that the expectation values (x) and (p) are time-dependent functions tha
Ehrenfest theorem, the expectation values of position and momentum obey the following equations of motion: d(x)/dt = (p/m) and
d(p)/dt = -dV(x)/dx.The three questions about quantum are as follows:
The Hamiltonian for a particle moving in one dimension is given by the following formula: H = (p^2/2m) + V(x) where p is the momentum, m is the mass, and V(x) is the potential energy function.
2) What are the expectation values (x) and (p).The expectation values (x) and (p) are given by the following formulae: (x) = h(x) and (p) = h(p) where h denotes the expectation value of a quantity.
3) How do (x) and (p) vary with time.The expectation values (x) and (p) are time-dependent functions that are given by the Ehrenfest theorem.
According to the Ehrenfest theorem, the expectation values of position and momentum obey the following equations of motion: d(x)/dt = (p/m) and
d(p)/dt = -dV(x)/dx.
To know more about Ehrenfest theorem visit:
https://brainly.com/question/33292862
#SPJ11
A spherical shell contains three charged objects. The first and second objects have a charge of -11.0 nC and 35.0 nC, respectively. The total electric flux through the shell is -953 N-m²2/C. What is
To find the charge of the third object in the spherical shell, we can use Gauss's law, which states that the total electric flux through a closed surface is equal to the net charge enclosed divided by the electric constant (ε₀).
Given:
Charge of the first object (q₁) = -11.0 nC = -11.0 x 10^(-9) C
Charge of the second object (q₂) = 35.0 nC = 35.0 x 10^(-9) C
Total electric flux through the shell (Φ) = -953 N·m²/C
Electric constant (ε₀) = 8.854 x 10^(-12) N·m²/C²
Let's denote the charge of the third object as q₃. The net charge enclosed in the shell can be calculated as:
Net charge enclosed (q_net) = q₁ + q₂ + q₃
According to Gauss's law, the total electric flux is given by:
Φ = (q_net) / ε₀
Substituting the given values:
-953 N·m²/C = (q₁ + q₂ + q₃) / (8.854 x 10^(-12) N·m²/C²)
Now, solve for q₃:
q₃ = Φ * ε₀ - (q₁ + q₂)
q₃ = (-953 N·m²/C) * (8.854 x 10^(-12) N·m²/C²) - (-11.0 x 10^(-9) C + 35.0 x 10^(-9) C)
q₃ = -8.4407422 x 10^(-9) C + 1.46 x 10^(-9) C
q₃ ≈ -6.9807422 x 10^(-9) C
The charge of the third object in the spherical shell is approximately -6.9807422 x 10^(-9) C.
To know more about spherical shell visit:
https://brainly.com/question/30300049
#SPJ11
Please, choose the correct solution from the list below. What is the force between two point-like charges with magnitude of 1 C in a vacuum, if their distance is 1 m? a. N O b. 9*10⁹ N O c. 1N O d.
The force between two point-like charges with magnitude of 1 C in a vacuum, if their distance is 1 m is b. 9*10⁹ N O.
The Coulomb’s law of electrostatics states that the force of attraction or repulsion between two charges is proportional to the product of their charges and inversely proportional to the square of the distance between them. Mathematically, Coulomb’s law of electrostatics is represented by F = k(q1q2)/d^2 where F is the force between two charges, k is the Coulomb’s constant, q1 and q2 are the two point charges, and d is the distance between the two charges.
Since the magnitude of each point-like charge is 1C, then q1=q2=1C.
Substituting these values into Coulomb’s law gives the force between the two point-like charges F = k(q1q2)/d^2 = k(1C × 1C)/(1m)^2= k N, where k=9 × 10^9 Nm^2/C^2.
Hence, the correct solution is b. 9*10⁹ N O.
Learn more about Coulomb’s law at:
https://brainly.com/question/506926
#SPJ11
mn² Calculate the rotational kinetic energy in the motorcycle wheel if its angular velocity is 125 rad/s. Assume m-10 kg, R₁-0.26 m, and R₂-0.29 m. Moment of inertia for the wheel I- unit KE unit
Rotational kinetic energy in a motorcycle wheel Rotational kinetic energy in the motorcycle wheel can be calculated using the formula: KE = (1/2) I ω²
Where,I = moment of inertiaω = angular velocity of the wheel The given mass of the wheel is m = 10 kg.
Also, R₁ = 0.26 m and R₂ = 0.29 m.
Moment of inertia for the wheel is given as I unit KE unit. Thus, the rotational kinetic energy in the motorcycle wheel can be calculated as:
KE = (1/2) I ω²KE = (1/2) (I unit KE unit) (125 rad/s)²
KE = (1/2) (I unit KE unit) (15625)
KE = (7812.5) (I unit KE unit),
the rotational kinetic energy in the motorcycle wheel is 7812.5
times the unit KE unit.
To know about inertia visit:
https://brainly.com/question/3268780
#SPJ11
problem 1 only
PROBLEM 1: A car travels a 10-degree inclined road at a speed of 20 ft/s. The driver then applies the break and tires skid marks were made on the pavement at a distance "s". If the coefficient of kinetic friction between the wheels of the 3500-pound car and the road is 0.5, determine the skid mark distance. PROBLEM 2: On an outdoor skate board park, a 40-kg skateboarder slides down the smooth curve skating ramp. If he starts from rest at A, determine his speed when he reaches B and the normal reaction the ramp exerts the skateboarder at this position. Radius of Curvature of the
The skid mark distance is approximately 14.8 feet.
To determine the skid mark distance, we need to calculate the deceleration of the car. We can use the following equation:
a = μ * g
where:
a is the deceleration,
μ is the coefficient of kinetic friction, and
g is the acceleration due to gravity (32.2 ft/s²).
Given that μ = 0.5, we can calculate the deceleration:
a = 0.5 * 32.2 ft/s²
a = 16.1 ft/s²
Next, we need to determine the time it takes for the car to come to a stop. We can use the equation:
v = u + at
where:
v is the final velocity (0 ft/s since the car stops),
u is the initial velocity (20 ft/s),
a is the deceleration (-16.1 ft/s²), and
t is the time.
0 = 20 ft/s + (-16.1 ft/s²) * t
Solving for t:
16.1 ft/s² * t = 20 ft/s
t = 20 ft/s / 16.1 ft/s²
t ≈ 1.24 s
Now, we can calculate the skid mark distance using the equation:
s = ut + 0.5at²
s = 20 ft/s * 1.24 s + 0.5 * (-16.1 ft/s²) * (1.24 s)²
s ≈ 24.8 ft + (-10.0 ft)
Therefore, the skid mark distance is approximately 14.8 feet.
(PROBLEM 1: A car travels a 10-degree inclined road at a speed of 20 ft/s. The driver then applies the break and tires skid marks were made on the pavement at a distance "s". If the coefficient of kinetic friction between the wheels of the 3500-pound car and the road is 0.5, determine the skid mark distance. PROBLEM 2: On an outdoor skate board park, a 40-kg skateboarder slides down the smooth curve skating ramp. If he starts from rest at A, determine his speed when he reaches B and the normal reaction the ramp exerts the skateboarder at this position. Radius of Curvature of the)
learn more about distance
https://brainly.com/question/13034462
#SPJ11