On CK-12 all of these answers are correct
1.9
1.888
1.89
1.88
The molality of a 10.0 % by mass solution of sodium chloride (NaCl) is 1.7M.
How do we calculate molarity?Molarity of any solution will be calculated as number of moles of solutes present in per litre of the solution.
Moles of the substance will be calculated as:
n = W/M, where
W = given mass
M = molar mass
Given that percent mass of NaCl = 10% i.e. 10g of NaCl is present in 100 g of solution.
We know that 1 g = 0.001 L
100 g = 0.1 L
Moles of NaCl = 10g / 58.44g/mol = 0.17 mol
Molarity of NaCl = 0.17 / 0.1 = 1.7M
Hence required molarity is 1.7 M.
To know more about molarity, visit the below link:
https://brainly.com/question/489225
What is the concentration of a 500 mL solution with 25 mol of HF? Write your answer with TWO decimal places and round accordingly.
Answer:
oop I'm thinking hmmmmm
How many moles is equal 82.4 grams of CO,?
Answer:
1 mole = 28.0101
Hence,
82.4 = around 2.8 mole
Have a great day <3
In Which State of matter are molecules moving the slowest
A. Solid
B. Liquid
C. Gas
Answer:
Solid
Explanation:
Molecules in solids only vibrate in place, while the other two have moving molecules
Which general equation represents an endothermic reaction?
A. reactants - energy - products + energy
B. reactants
products + energy
C. reactants + products - energy
D. reactants + energy
products
Explanation:
The general equation for an endothermic reaction is: Reactants + Energy → Products.
Hope it helps :)❤
The equation represents an endothermic reaction is reactants + energy
products.
What is an endothermic reaction?
Endothermic reactions are chemical reactions in which the reactants soak up warm strength from the surroundings to form products.
net energy is not released.heat is not evolved with the product.heat is required to start the reaction.increase with the increase in temperature.decrease with a decrease in temperature.Learn more about the endothermic reaction here:-https://brainly.com/question/6506846
#SPJ2
You have 281 kilojoules how many kilocalories is it need to know ASAP
Use the following balanced reaction to solve 1-3:
P4 (s) + 6H2 (g) → 4PH3 (g)
How many grams of phosphorus trihydride will be formed by reacting 60 L of Hydrogen gas with an excess of P4?
Answer:
60.86 g of PH₃
Explanation:
We'll begin by calculating the number of mole of H₂ that will occupy 60 L. This can be obtained as follow:
22.4 L = 1 mole of H₂
Therefore,
60 L = 60 / 22.4
60 L = 2.68 mole of H₂.
Next, we shall determine the number of mole of PH₃ produced by the reaction of 60 L (i.e 2.68 mole) of H₂. This can be obtained as follow:
P₄ + 6H₂ –> 4PH₃
From the balanced equation above,
6 moles of H₂ reacted to produce 4 moles of PH₃.
Therefore, 2.68 moles of H₂ will react to to produce = (2.68 × 4)/6 = 1.79 moles of PH₃.
Finally, we shall determine the mass of 1.79 moles of PH₃. This can be obtained as follow:
Mole of PH₃ = 1.79 moles
Molar mass of PH₃ = 31 + (3×1)
= 31 + 3 = 34 g/mol
Mass of PH₃ =?
Mass = mole × molar mass
Mass of PH₃ = 1.79 × 34
Mass of PH₃ = 60.86 g
Thus, 60.86 g of PH₃ were obtained from the reaction.
1,3,5,7-Cyclooctatetraene, C8H8, is an unusual hydrocarbon in that it reacts with exactly 2 equivalents of potassium to give A, C8H8K2, which can be isolated as a white solid. A exhibits a single proton NMR signal. Draw the structure of A
Answer:
Explanation:
The main assignment here is to provide the structure of A. But before that, let us explain briefly some certain things:
The proton NMR (1H) gives data about the quantity of non-identical protons present in the structure. The resonance frequency is seen regarding the standard compound (0 ppm), which is addressed as a chemical shift. The same protons have equal value of chemical shift.
The protons that are available in a similar environment are addressed as comparable protons and the protons with various conditions are called non-identical protons.
However, from the image below, we can see the reaction of the compound 1,3,5,7-cyclooctatetraene resulting in 2 equivalents of potassium forming an aromatic dianion.
How many grams of ( S ) - 1 - chloro - 4 - ethyl - 2 - methylhexane and triphenylphosphine would you need to create 4 . 1 5g of ( S ) - 1 - chloro - 4 - ethyl - 2 - methyl triphenylphosphonium assuming an 8 1 % yield for the reaction?
Answer:
Explanation:
The standard molar mass is:
For (S )-1-chloro-4-ethyl-2-methylhexane = 162.5 g/mol
For triphenylphosphine = 262 g/mol
For ( S )-1-chloro-4-ethyl-2-methyl triphenylphosphonium = 424.5 g/mol
The mass required for 81% yield = [tex]\dfrac{81}{100} \times Theoretical \ yield = 4.15 g[/tex]
Theoretical yield = [tex]\dfrac{4.15}{0.81}[/tex]
= 5.1235 g
thus, since 424.5 g yield produce from 162.5 g
∴
5.1235 g yield will produce = [tex]\dfrac{162.5}{424.5}\times 5.1235 \ g[/tex]
= 1.9613 g of alkyl halide (-chloro) required.
Also, since 424.5 g yield produce from 262 g phosphine
∴
5.1235 g yield will produce = [tex]\dfrac{262}{424.5}\times 5.1235 \ g[/tex]
= 3.1622 g of triphenylphosphine required.
explain what you would do expect caesium astatide to look like .will it be soluble in water ?explain your reasoning
Answer:
it will not be soluble in water Becoz it can only be
separated by passing it through silver nitrate solution
Explanation:
i hope you understand
A compound accepts electrons from another substance to form a covalent bond. Which term best describes this
compound's behavior?
-Lewis acid
-Arrhenius base
-Bronsted-Lowry acid
-Bronsted-Lowry base
Answer:
A). Lewis Acid
Explanation:
deez
The term that best describes the compound that accepts electrons from another substance to form a covalent bond is Lewis acid.
What is Lewis acid?Lewis acid is a compound or ionic species which can accept an electron pair from a donor compound while a Lewis base is a compound such as the OH- ion, that can donate a pair of non-bonding electrons.
According to this question, a compound accepts electrons from another substance to form a covalent bond.
Therefore, the term that best describes the compound that accepts electrons from another substance to form a covalent bond is Lewis acid.
Learn more about Lewis acid at: https://brainly.com/question/15570523
#SPJ2
what career field/job would utilize ppm units
A environmental jobs
B Medical fields
C Jobs at the brewery
D Jobs in analytical chemistry
Of the three Intermolecular forces, the type with the largest dissociation energy is ________.
A. Dipole-dipole interactions
B. Dispersion forces
C. Hydrogen bonds
Answer:
C. Hydrogen bonds
Explanation:
Strongest intermolecular force
Hydrogen Bonding (H-Bonding)
Hydrogen bonds are caused by highly electronegative atoms. They only occur between hydrogen and oxygen, fluorine or nitrogen, and are the strongest intermolecular force.
Answer: C hydrogen bonds
Explanation:
Is this equation balanced: AgNO3 + 2 KCl -->AgCl + KNO3 Yes No
Answer:
No
Explanation:
AgNO₃ + KCl --> AgCl + KNO₃
This reaction is a precipitation reaction. AgCl is formed as a white solid due to its low solubility in water.
- Explain why the term greenhouse effect is used to describe the theory of global
warming.
Does the greenhouse effect affect life on Earth? If yes, explain how?
What are the possible effects of a buildup of greenhouse gases in our atmosphere?
A change resulting in one or more new substances being formed is a?
A. nuclear reaction
B.physical property
C. chemical change
D.physical change
Answer:
C. Chemical change
Explanation:
A physical change is where something is changed but it doesnt affect the build up of the chemical. For example, if you broke sticks and threw them on the ground, that would be a physical change because the change is happening to the physical being of the object and not its chemical buildup. However, if you lit those sticks on fire, that would be considered a chemical change because you end up with two substances, ash and the remnants of the stick. A nuclear reaction would result in something blowing up so its not that. And a physical property is like what it looks like or how it smells. Hope I helped you!
MATch THE BOXED PLEASEEEE
Answer:
Transform = The third one
Convergent = the first one
Divergent = the second one
Explanation:
What is a similarity between a fish embryo and a human embryo in the late stages of development?
They both have tails
They both have gills.
They both have spines.
They both have arms.
Answer:In the LATER stages of development they would have a spine
Explanation: