Answer:
The maximum number of moles of PH₃ that can be formed is 0.8 moles.
Explanation:
The balanced reaction is:
P₄ + 6 H₂ → 4 PH₃
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of each compound participate in the reaction:
P₄: 1 moleH₂: 6 molesPH₃: 4 molesThe limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.
To determine the limiting reagent, you can use a simple rule of three as follows: If by stoichiometry of the reaction 6 moles of hydrogen react with 1 mole of phosphorus, 4 moles of hydrogen will react with how many moles of phosphorus?
[tex]moles of phosphorus=\frac{4 moles of hydrogen*1 mole og phosphorus}{6moles of hydrogen}[/tex]
moles of phosphorus= 0.667
But 0.667 moles of phosphorus are not available, 0.2 moles are available. Since you have less moles than you need to react with 4 moles of hydrogen, phosphorus will be the limiting reagent.
Then you can apply the following rule of three: if by stoichiometry 1 mole of P₄ forms 4 moles of PH₃, 0.2 moles of P₄ will form how many moles of PH₃?
[tex]moles of PH_{3} =\frac{0.2 moles of P_{4} *4 moles of PH_{3} }{1 mole of P_{4} }[/tex]
moles of PH₃= 0.8
The maximum number of moles of PH₃ that can be formed is 0.8 moles.
A STACK OF BOOKS WEIGHED 5 KILOGRAMS. ONE BOOK, WHICH WEIGHED 1,000 GRAMS, WAS
REMOVED FROM THE STACK HOW MUCH DID THE REMAINING BOOKS WEIGH?
Answer:
the remaining books weigh 4 kilograms or 4000 grams
Calculate the change in heat (Q) that occurs when 7.58grams of steam at 101°C cools to liquid water at 40°C. (cp = 4.184 J/g°C)
Answer:
Q = 19065.4 J
Explanation:
Q₁ = the required energy for phase change of H₂O from vapor to liquid
Q₁ = mass of H₂O * heat of vaporization
Q₁ = 7.58 g * 2260 J/g
Q₁ = 17130.8 J
Q₂ = energy required to cool the water fro 101°C to 40°C
Q₂ = mass of H₂O * specific heat of H₂O * ΔT
Q₂ = 7.58 × (4.184 J/gC) × (101 - 40)
Q₂ = 1934.6 J
Q = Q₁ + Q₂
Q = (17130.8 + 1934.6) J
Q = 19065.4 J
15. What is the molar mass of H2CO3?
(atomic mass: C = 12.01, H = 1.01, 0 = 15.99)
Answer:
62.00
Explanation:
H2 means that there are two moles of hydrogen so multiply the atomic mass by two (1.01 × 2 = 2.02)
C only has one mole sp leave 12.01 alone
And multiply oxygen by 3 because there are three moles of oxygen (15.99 × 3 = 47.97)
Add them all together!
2.02 + 12.01 + 47.97 = 62.00 for molar mass
can someone answer the 4 questions? (4 is optional) it would really help me out thanks
Answer:
1)Energy converter is the transformation of one form of energy into another form .It is more specifically that the term energy conversions refers to the process through which energy is changed into forms that are useful to humans .For 100 of years humans have used an array of devices and systems for this purpose.
2) The three energy converters that you or your family use regularly are
Electric Iron Electric BulbElectric generator3)The three kinds of power plants that produce electricity in Ontario are
Nuclear Power PlantsHydroelectric Power PlantsGeothermal Power Plants4)A power plant is an industrial facility that generates electricity from primary energy most of the power plants use one more generators that convert mechanical energy into electrical energy in order to supply power to the electrical grid for society's electrical needs.
may be this was ur answer for ur question u wanted
WILD GUESS
OUT OF BAKUGOU SHOTO AND DEKU
GUESS WITCH ONE I SIMP FOR
Answer: all of them?
Explanation:
Answer:
Deku.
Explanation:
Water conservation is important for which of the following reasons?
A. Demand for water is increasing.
B. Water treatment is expensive.
C. Pollution is likely to decrease water supply in the future.
D. All of the above
D
all of above becuase it's all conservation
Answer:
The answer is c which is pollution is likely to decrease water supply in the future
Describe the radial velocity curve. What is its shape? What is its amplitude? What is the orbital period?
Answer:
The radial velocity curve describes how fast a star is moving in its orbit around a center of mass ( m )
Curve amplitude : This is the maximum value of the radial velocity curve
Radial velocity shape ; The shape of Radial velocity curve is parabolic in nature
Orbital period : Orbital period is the time taken by the star to make one complete rotation in its orbit
Explanation:
The radial velocity curve describes how fast a star is moving in its orbit around a center of mass ( m ) while Curve amplitude is the maximum value of the radial velocity curve also The shape of Radial velocity curve is parabolic in nature. and Orbital period is the time taken by the star to make one complete rotation in its orbit
HELP PLEASE ||Suppose you add water to a 6 g of sugar to make a solution with a concentration of 3 g/L. What is the total volume of the solution?
Answer:
2 L
Explanation:
Divide the mass by the concentration to find the volume.
(6 g)/(3g/L) = 2 L
According to the concept of solubility, in order to make solution of sugar the total volume of solution is 2 g/L.
What is solubility?Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.
The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.
In order to calculate total volume of solution divide mass/ concentration that is 6/3=2 g/L.
Thus, the total volume of the solution is 2 g/L.
Learn more about solubility,here:
https://brainly.com/question/29589228
#SPJ2
Cuáles son el pHy PoH de una solución cuya concentración de iones hidronio [H+]es de 0.000475 M de acido sulfurico?
Explain why an organism dies if the respiratory and circulatory system 'paused' for a while.
Answer:
Without the respiratory system your blood would be useless. The circulatory and respiratory systems work together to circulate blood and oxygen throughout the body
Explanation:
Which of these results in kinetic energy of an object? position mchotion
Answer:
..... yep
Explanation:
tep no yep no hyshshshss
motion results in the kinetic energy of an object
What is the answer?
Answer:
Option A
Explanation:
The atomic number is the number of protons in the nucleus of an atom.
When a 8 gram slice of bread is burned under a beaker of 4500 grams of water, it heats up the water by 1.3 degrees Celsius. The specific heat of water is 1 cal/g degree C. How many calories does this slice of bread contain
Answer:
[tex]5850\ \text{cal}[/tex]
Explanation:
m = Mass of water = 4500 g
c = Specific heat of water = [tex]1\ \text{cal/g}^{\circ}\text{C}[/tex]
[tex]\Delta T[/tex] = Change in temperature of water = [tex]1.3^{\circ}\text{C}[/tex]
Heat is given by
[tex]q=mc\Delta T\\\Rightarrow q=4500\times 1\times 1.3\\\Rightarrow q=5850\ \text{cal}[/tex]
A slice of the bread contains [tex]5850\ \text{cal}[/tex].
HELP WITH THIS WORD PROBLEMStudents want to gather evidence for the claim that the number of atoms present before a chemical reaction is equal to the number of atoms present after the chemical reaction. They decide to react vinegar and baking soda in a sealed plastic bag. Which of the following would provide the evidence the students need?
The mass of the plastic bag, baking soda, and vinegar before the reaction was equal to the mass after the reaction.
Bubbles were produced during the reaction, which meant that a gas was being produced
.The plastic bag did not change in any way, indicating that it was not involved in the reaction.
The mass of the baking soda was exactly equal to the mass of the vinegar used to create the chemical reaction.
Give me lil reasoning so I know your not lying for points
:(
(I’ll mark you as brainlister )
Answer:
C
Explanation:
An inverse relationship means that as one increases the other decreases. From the negative slope of this graph, you can tell that as volume increases, pressure decreases. If you look at the data point for 20 on the volume axis, it matches up with about 240 on the pressure axis.
Human body cells are made by doing what ?
Answer:
When cells become damaged or die the body makes new cells to replace them. This process is called cell division. One cell doubles by dividing into two. Two cells become four and so on.
Explanation:
which horizon has the least weathered rocks? How do you know?
Answer:
C: The C horizon is a subsurface horizon. It is the least weathered horizon. Also known as the saprolite, it is unconsolidated, loose parent material. The master horizons may be followed by a subscript to make further distinctions between differences within one master horizon.
Explanation:
40 points
I have 400 mL of a 0.2 M simple syrup solution (made up of just sugar and water) that I want to boil down to result in a solution with a concentration of 0.5 M. How many milliliters of water would I need to evaporate?
Answer:
2000ml
Explanation:
you multiple 400ml with 0.5 ml to get the required meter for the water that needs to be evaporated
1. Which of the five types of reactions is taking place in the whoosh bottle? Justify your answer with evidence from the video.
Answer:
Other times I place a candle in water and cover it with a glass jar .
Explanation:
only to ... Many of you may already know this as the Whoosh Bottle demo due ... I have used this demo in the past for topics like exothermic reactions, combustion reactions, ... This adds to the evidence of a partial vacuum created in the bottle
The teacher asked the students to design an experiment that would demonstrate that temperature will affect the pressure of a gas. Which of the
following would be a valid experiment that shows the correct relationship between gas temperature and pressure?
The correct option is option A. when the students check the air pressure of bicycle tires, once by keeping it out in the winter and noticing the air pressure being decreased and after by keeping the bicycle inside at room temperature and noticing that the air pressure has increased.
How are pressure and temperature of a gas related ?
According to Gay lussac's law, the temperature and pressure of a gas are directly proportional to each other, provided the volume is constant.
When the temperature of a gas is increased, the molecules gain more kinetic energy and hence the frequency of them hitting the walls of the container increases which basically implies that the pressure increases.
On the other hand when the temperature is low, the molecules do not have substantial kinetic energy to hit the walls of the container frequently, that is the pressure decreases.
When the bicycle tires were kept out in the winter, the low temperature decreased the air pressure inside the tires. While when they were warmed at room temperature, the pressure inside the tires increased.
Therefore, the correct option is option A. when the students check the air pressure of bicycle tires, once by keeping it out in the winter and noticing the air pressure being decreased and after by keeping the bicycle inside at room temperature and noticing that the air pressure has increased.
To know more on Gay lussac's law, click on
https://brainly.com/question/30758452
#SPJ2
Look at the dots around each symbol and the energy levels from the resources above;
Answer the questions in the text entry option for this assignment.
Copy and paste questions and respond in complete sentences.
Include a space between each question.
Be specific with your responses for each question. Assume your reader has no knowledge of the subject and you are teaching them via your answers.
Please answer the following questions:
Why does Na have only one dot?
Why do none of these diagrams show more than 8 dots?
What relationship do you notice between the dots in these two charts?
The number of dots that hydrogen and helium have in their dot diagram is the same as the number of electrons shown for them on the Periodic Table. Why? (Hint: Octet Rule (Links to an external site.))
Hello! Here's the answer I was able to come up with:
Why does Na have only one dot?
Sodium, or Na, has only one valence electron. (This makes the atom tend to participate in ionic bonding and "give" its single valence electron to an atom like chlorine.)
Why do none of these diagrams show more than 8 dots?
It is physically impossible for an atom to have more than 8 electrons in its valence layer, according to the Octet Rule.
What relationship do you notice between the dots in these two charts?
The dot diagram for each element represents the number of electrons each element will have in its outermost, or valence, shell. (2-8-8)
The number of dots that hydrogen and helium have in their dot diagram is the same as the number of electrons shown for them on the Periodic Table. Why?
An atom can have a maximum of two electrons in its innermost layer. Hydrogen and helium have only one and two electrons, respectively, so they don't have enough electrons to actually have more than one layer. Therefore, their outermost layer is, in fact, their only layer. This is why the number of dots that hydrogen and helium have in their dot diagram is the same as the number of electrons shown for them on the Periodic Table.
Don't copy this word for word! You will most likely be in trouble for plagiarism. Instead, rewrite these ideas in your own words, or paraphrase. Good luck, and I know you can do it! ♥
Which is NOT an assumption of matter made by the kinetic molecular theory of gases?
a. The kinetic energy of particles is determined by their mass and their velocity.
b. Gas particles are widely dispersed and therefore are not affected significantly by attractive or repulsive forces.
c. Gas particles are small and take up little volume relative to the volume of the space around them.
d. When particles collide, their total energy is decreased.
Answer:
There is strong attraction or repulsion between the gas particles.In other words,they strongly interact with each other" is NOT an assumption made by kinetic molecular theory.
The theory that attempts to elucidate the behaviour of gases is known as kinetic molecular theory.
The postulates of kinetic molecular theory of gases are given below,
\bigstarGases consist of large number of identical particles(atoms or moleculesthat are so small and so far apart
\bigstar There is no force of attraction between the particles of a gas at ordinary temperature and pressure
\bigstarParticles of a gas are always in constant and random motion
\bigstarParticles of a gas move in all possible directions in straight lines. During their random motion, they collide with each other and with the walls of the container
\bigstarCollisions of gas molecules are perfectly elastic. This means that total energy of molecules before and after the collision remains same
\bigstarThe average kinetic energy (energy due to motion) of the gas particles is proportional to the temperature measured in kelvin. As temperature increases, the particles move faster and have more energy
\bigstarAt any particular time, different particles in the gas have different speeds and hence different kinetic energies.
\therefore From the above data it is clear that "There is strong attraction or repulsion between the gas particles.In other words,they strongly interact with each other" is NOT an assumption made by kinetic molecular theory.
Explanation:
According to Kinetic theory of gases, the kinetic energy of particles are derived from the temperature and not by their mass and velocity. Hence, option a is not an assumption of kinetic theory of gases.
What is kinetic theory gases ?According to kinetic theory of gases, gases substances are made of tiny particles. These particles when taken in a container have negligible volume compared to the volume of the container.
The collision between the gaseous particles and and between the particles and the wall make the pressure within the container. The kinetic energy of the particles is directly proportional to the temperature of the gas.
According to the theory, the kinetic energy is not determined from the mass and velocity of the particles, but by the temperature of the system. Hence, option a is not an assumption of kinetic molecular theory of gases.
Find more on kinetic theory:
https://brainly.com/question/14349214
#SPJ3
At what point is a base no longer added during a titration?
A. when the pH increases suddenly in the flask
B. when the phenolphthalein remains clear in the flask
C. before the solution in the flask reaches the equivalency point
D. before half of the base is completely drained from the burette
Answer:
when the pH increases suddenly in the flask
Explanation:
I think it's right. :)
When the pH increases suddenly in the flask at that point is a base no longer added during a titration.
What is titration?Titration is a typical quantitative chemical analysis procedure used in laboratories to quantify the concentration of a specified analyte. The titrant or titrator is a reagent that is produced as a standard solution with a known concentration as well as volume.
What is pH?The pH scale, which originally stood for "potential of hydrogen," is used to describe the acidity as well as basicity of aqueous solutions. The pH of acidic solutions is lower than that of basic as well as alkaline solutions.
To know more about pH and titration.
https://brainly.com/question/2728613
#SPJ2
2A → B + C The above reaction is run and it is found that a plot of the natural log of the concentration versus time is linear. This indicates that the reaction is ...
Answer:
zero order reaction
Explanation:
The seem to be a reaction is zero order as the data only fits to zero order integrated rate law.
Integrated rate law:
[A] = [A]_0 – kt
Here y = [ A] and slope is -k , so when we plot concentration of A with respect to t then we get the equation in the form of line
y = mx + c
So the answer Zero order in [A]
In a warehouse, the workers sometimes slide boxes along the floor to move them. Two boxes were sliding toward each other and crashed. The crash caused both boxes to change speed. Based on the information in the diagram, which statement is correct? In your answer, explain what the forces were like and why the boxes changed speed.
Box 1 has more mass than Box 2.
Box 1 and Box 2 are the same mass.
Box 1 has less mass than Box 2.
Answer:
Box 1 and Box 2 are the same mass.
Explanation:
Because they both change speed due to having the same mass!
Hope this helps! :) BRAINLIEST PLZ
What type of ion is responsible for activating the vesicles in the axon terminal
а
ОО
Magnesium
Rubidium
b
С
Calcium
d
8
Phosphorus
Fluorine
е
Answer:
Calcium ions
Explanation:
Calcium ions entering the cell initiate a signaling cascade that causes small membrane-bound vesicles, called synaptic vesicles, containing neurotransmitter molecules to fuse with the presynaptic membrane.
why do scientist think the earths core have iron in it .
what is change in science
Answer:
Scientific change is: "Any change in the scientific mosaic, i.e. a transition from one accepted theory to another or from one employed method to another. "
Explanation:
Find the molar mass of CaCO3
Answer:
molar mass of caco3 is
100.0869 g/ mol
write the electronic configuration of an Na+ and CL-1
Answer:
Na+ lost one electron: 1s2 2s2 2p6
Cl- gained an electron: 1s2 2s2 2p6 3s2 3p6
Explanation: