what is the length of a simple pendulum with a period of 2.0 s? group of answer choices 20 m 0.87 m 0.99 m 1.2 m

A ball is thrown into the air at some angle between 10 degrees and 90 degrees. At the very top of the ball’s path, its velocity is C) both vertical and horizontal

When a ball is thrown into the air at some angle between 10 degrees and 90 degrees, it follows a parabolic trajectory. At the very top of the ball's path, its velocity can be broken down into two components - horizontal and vertical. The horizontal velocity of the ball remains constant throughout its flight, as there is no force acting on it in the horizontal direction. However, the vertical velocity of the ball changes continuously due to the force of gravity acting on it.

At the very top of the ball's path, its vertical velocity is zero, as it momentarily comes to a stop before starting to fall back down. However, its horizontal velocity remains the same as it was at the moment of release. It is worth noting that the vertical velocity of the ball at the top of its path is important in determining how high the ball goes. The higher the ball goes, the longer it spends in the air, and the more time gravity has to act on it, slowing it down until it reaches its maximum height before falling back down.

In summary, the velocity of a ball thrown into the air at some angle between 10 degrees and 90 degrees has both horizontal and vertical components. At the very top of its path, its vertical velocity is zero, and its horizontal velocity remains constant throughout its flight. Therefore, the correct answer is option C.

The Question was Incomplete, Find the full content below :

A ball is thrown into the air at some angle between 10 degrees and 90 degrees. At the very top of the ball’s path, its velocity is

A)    entirely vertical

B)    entirely horizontal

C)    both vertical and horizontal

D)    there is not enough information given    

Know more about Parabolic trajectory here :

https://brainly.com/question/24235651

#SPJ11

The person is carrying the plank in a horizontal position, with one hand at one end and the other hand at a distance of 0.400 m from the end. This means that the weight of the plank and its center of gravity are acting downward at the middle of the plank.

To calculate the force that the first hand is pushing down with, we need to use the principle of moments. The principle of moments states that the sum of the moments acting on an object is zero when the object is in equilibrium.

In this case, the moments acting on the plank are the weight of the plank acting downwards and the force of the first hand pushing downwards. The distance between the force of the first hand and the center of gravity is 1.00 m (half of the length of the plank). The distance between the weight of the plank and the center of gravity is also 1.00 m.

Since the plank is in equilibrium, the sum of the moments acting on the plank must be zero. This gives us:

Force of first hand x 1.00 m = Weight of plank x 1.00 m

Solving for the force of the first hand, we get:

Force of first hand = Weight of plank

Substituting the values given, we get:

Force of first hand = 25.0 kg x 9.81 m/s^2

Force of first hand = 245.25 N

Therefore, the first hand is pushing down on the plank with a force of 245.25 N.

Learn more about gravity here:

https://brainly.com/question/31321801

#SPJ11

The resonant frequency (ωo) of this circuit is approximately 196.79 radians/s.

To find ωo, the resonant frequency of the circuit with two capacitors (C1 = 118 μF, C2 = 283 μF) and an inductor (L = 318 mH), we first need to calculate the equivalent capacitance (Ceq) for the capacitors connected in series. The formula for capacitors in series is:

1/Ceq = 1/C1 + 1/C2

Next, plug in the values for C1 and C2:

1/Ceq = 1/(118 × 10^(-6) F) + 1/(283 × 10^(-6) F)

Now, calculate Ceq:

Ceq ≈ 79.65 × 10^(-6) F

Now, we can determine the resonant frequency (ωo) using the formula:

ωo = 1/√(L*Ceq)

Plug in the values for L and Ceq:

ωo = 1/√((318 × 10^(-3) H) * (79.65 × 10^(-6) F))

Finally, calculate ωo:

ωo ≈ 196.79 radians/s

The resonant frequency (ωo) of this circuit is approximately 196.79 radians/s.

Learn more about "frequency": https://brainly.com/question/254161

#SPJ11

The answer is B. Methane played a significant role in the atmosphere of early Earth, but ozone was not present at that time.

Ozone is a form of oxygen that forms a layer in the Earth's upper atmosphere and helps protect the planet from harmful UV radiation. However, in the early stages of Earth's history, there was no significant amount of oxygen in the atmosphere to create ozone.
ozone. Methane, water vapor, and UV light were all present during early Earth's conditions. However, ozone (O3) was not present at that time because it is formed when oxygen molecules (O2) interact with UV light, and the early Earth atmosphere had very little free oxygen.

To know more about ozone visit :-

https://brainly.com/question/5019112

#SPJ11

An estimate of how much energy per year is needed for 1 gigawatt is approximately 31,536,000,000,000,000 joules (J) per year.

To estimate how much energy per year is needed for 1 gigawatt, we need to consider the unit of measurement for energy, which is joules (J).

A gigawatt is equivalent to 1 billion watts or 1,000,000,000 watts. To calculate the energy per year, we need to multiply this value by the number of seconds in a year.

There are 60 seconds in a minute, 60 minutes in an hour, 24 hours in a day, and 365 days in a year.

So, 1 gigawatt x 1 year = 1,000,000,000 watts x 60 seconds/min x 60 minutes/hour x 24 hours/day x 365 days/year

= 31,536,000,000,000,000 joules (J) per year

Therefore, approximately 31,536,000,000,000,000 joules (J) per year  is an estimate of energy needed for 1 gigawatt.

For more such questions on energy, click on:

https://brainly.com/question/13881533

#SPJ11

The elongated nucleus of our galaxy is responsible for generating a wide range of phenomena, including the influence of a supermassive black hole, star formation activity, and the production of synchrotron radiation. These processes are vital to understanding the overall structure, dynamics, and evolution of the Milky Way.

The nucleus of our galaxy, also known as the galactic center, is a region that plays a crucial role in generating various phenomena. Located approximately 26,000 light-years from Earth, it is thought to have an elongated shape rather than being perfectly spherical.

At the heart of the galactic nucleus lies a supermassive black hole called Sagittarius A* (Sgr A*). This black hole is responsible for generating intense gravitational forces, which influence the motion and behavior of surrounding stars, gas, and dust. Additionally, Sgr A* is a major source of X-ray and radio emissions, contributing to the overall energy output of the galaxy's core.

The galactic center also exhibits a high degree of star formation activity. Massive, young stars in this region emit intense ultraviolet radiation, which in turn ionizes the surrounding gas clouds. This process leads to the creation of H II regions, which are areas of glowing ionized gas. These regions not only serve as stellar nurseries but also contribute to the overall appearance and structure of the galactic nucleus.

Furthermore, the interaction of energetic particles, magnetic fields, and turbulent gas flows in the galactic nucleus generates synchrotron radiation, which is emitted at various wavelengths, including radio, infrared, and X-ray. This radiation is an important tool for astronomers to study the complex processes occurring within the core of our galaxy.

For more such questions on Milky Way Galaxy.

https://brainly.com/question/2905713#

#SPJ11

All the resistors have the same current going through them. Therefore, option E is correct.

In the given circuit, R₁ and R₂ are connected in parallel combination. The current is divided into half between R1 and R2. Let the I current flowing through the circuit.

Current in R₁ = I/2

Current in R₂ = I/2

The current that exits this combination is I. In second part of the circuit R₃ and  R₄ are connected in series and this series combination is connected in a parallel combination with R₅. Thus, the current flows in the upper arm (R₃ and R₄) are half and the current flows through the lower arm is also half.

Current in R₃ = I/2

Current in R₄ = I/2

Current in R₅ = I/2

Therefore, same amount of current flows through all the resistors.

Learn more about resistors, here:

https://brainly.com/question/30672175

#SPJ12

Your question is incomplete, most probably the full question is this:

Which resistor has the greatest current going through it? Assume that all the resistors are equal

a) R1 and R2.

b) R1.

c) R5.

d) R3 and R4.

e) All the resistors have the same current going through them.

Yes, we would expect current to be correlated with voltage in an electrical circuit where the resistance is constant.

This is because, according to Ohm's Law, the current flowing through a conductor between two places is directly proportional to the voltage across the two sites and inversely proportional to the resistance between them.

In other words, as the voltage across a circuit with a constant resistance grows, so does the current flowing through it. In the other direction, as the voltage falls, so does the current.

In this circumstance, we would expect to see a positive correlation between voltage and current. The current should increase when the voltage increases, and vice versa. The precise nature of the correlation will be determined by the circuit's individual characteristics, such as the resistance value and the type of conductor utilised.

learn more about Ohm's law here:

https://brainly.com/question/1247379

#SPJ4

Using the Gay-Lussac's Law, which states that the pressure of a gas is directly proportional to its temperature when the volume is constant, we can solve this problem. The formula is:

P1/T1 = P2/T2

Where P1 and T1 are the initial pressure and temperature, and P2 and T2 are the final pressure and temperature. Plugging in the values given:

(1.5 atm) / (300 K) = P2 / (400 K)

To find the new pressure (P2), multiply both sides by 400 K:

P2 = (1.5 atm) * (400 K) / (300 K)

P2 ≈ 2 atm

The new pressure of the gas in the scuba tank is approximately 2 atmospheres.

TO KNOW MORE ABOUT Gay-Lussac's Law CLICK THIS LINK -

brainly.com/question/17430532

#SPJ11

Answer: (a) The final volume of the gas is 0.078 m^3.

(b) The work done by the gas is -2.2997 kJ.

(c) The thermal energy transferred is 2.2997 kJ.

Explanation: (a) The process is isothermal, which means the temperature remains constant during the compression. Therefore, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Since the process is isothermal, T is constant, and we can write:

P1V1 = P2V2

where subscripts 1 and 2 refer to the initial and final states, respectively.

We are given that n = 2 mol, P1 = 0.42 atm, P2 = 1.88 atm, and T = 257 K. Therefore, we can solve for V2:

V2 = V1 * P1/P2 = (nRT)/P2 * P1

Substituting the values, we get:

V2 = (2 mol * 8.31451 J/K·mol * 257 K) / (1.88 atm) * (0.42 atm) = 0.078 m^3

Therefore, the final volume of the gas is 0.078 m^3.

(b) The work done by the gas during an isothermal process is given by:

W = -nRT ln(P2/P1)

Substituting the values, we get:

W = -(2 mol) * (8.31451 J/K·mol) * (257 K) * ln(1.88/0.42) = -2299.7 J

Therefore, the work done by the gas is -2299.7 J or -2.2997 kJ (to three significant figures).

(c) Since the process is isothermal, the thermal energy transferred is equal to the work done by the gas:

Q = -W = 2.2997 kJ

Therefore, the thermal energy transferred is 2.2997 kJ.

When a negatively charged balloon touches a neutral electroscope, it transfers some of its excess electrons to the electroscope. This causes the electroscope to become negatively charged as well. As a result, the leaves of the electroscope, now having similar negative charges, repel each other and spread apart.

When a negatively charged balloon touches a neutral electroscope, some of the electrons from the balloon will transfer to the leaves of the electroscope. This will cause the leaves to become negatively charged and repel each other, causing them to spread apart. The extent of the leaf separation will depend on the strength of the charge on the balloon and the sensitivity of the electroscope.

To know more about electroscope click here:

https://brainly.com/question/31030885

#SPJ11

The ball to reach the ground first is the one filled with lead pellets.

When a pair of tennis balls fall through the air from a tall building, one regular and the other filled with lead pellets, both balls experience the force of gravity pulling them towards the ground. However, the ball filled with lead pellets has a greater mass due to the added weight of the lead. This results in a larger gravitational force acting on it.

Air resistance is also a factor when objects fall through the air. The regular tennis ball and the one filled with lead pellets have similar shapes and sizes, so they experience similar air resistance. However, due to the greater gravitational force acting on the ball filled with lead pellets, it can more easily overcome air resistance and accelerate towards the ground faster than the regular tennis ball. Thus, the ball filled with lead pellets reaches the ground first.

To learn more about accleration of lead filled ball https://brainly.com/question/14277564

#SPJ11

So we can conclude that the coefficient of kinetic friction between the surface and the block is approximately 0.51.

We can use the conservation of energy to determine the coefficient of kinetic friction between the surface and the block.

The initial potential energy stored in the compressed spring is given by:

PE = (1/2)kx²

where k is the spring constant and x is the compression of the spring

PE = (1/2)(800 N/m)(0.2 m)²= 16 J

When the block has moved 0.8 m, the spring has returned to its natural length and all the potential energy is converted to kinetic energy and dissipated as work done against frictional forces.

The final kinetic energy of the block is given by:

KE = (1/2)mv²

where m is the mass of the block and v is its velocity

KE = (1/2)(4 kg)(v²)

The work done against frictional forces is given by:

W = Ff * d

where Ff is the force of kinetic friction and d is the distance the block moves

W = Ff * 0.8 m

By conservation of energy, the potential energy stored in the compressed spring is equal to the work done against frictional forces:

PE = KE + W

16 J = (1/2)(4 kg)(v²) + Ff * 0.8 m

Since the block comes to rest, its final velocity is zero, so we can solve for Ff:

Ff = (16 J - (1/2)(4 kg)(0 m/s)²) / (0.8 m)

Ff = 20 N

Now we can determine the coefficient of kinetic friction:

Ff = μk * Fn

where μk is the coefficient of kinetic friction and Fn is the normal force

Since the block is at rest, the normal force is equal in magnitude to the weight of the block:

Fn = mg = (4 kg)(9.8 m/s²)

= 39.2 N

Therefore, the coefficient of kinetic friction is:

μk = Ff / Fn

μk = 20 N / 39.2 N

≈ 0.51

To know more about coefficient of kinetic friction,

https://brainly.com/question/30394536

#SPJ11

One of Galileo's famous experiments involved dropping objects of different weights from the Leaning Tower of Pisa to demonstrate that they fell at the same rate in the absence of air resistance, contrary to Aristotle's belief that heavier objects fell faster.

Galileo Galilei was an Italian physicist and astronomer who made significant contributions to the study of motion. At the time, the dominant theory of motion was proposed by Aristotle, who believed that heavier objects fell faster than lighter objects. Galileo performed experiments, including dropping objects of different masses from the Leaning Tower of Pisa, and found that objects of different masses fall at the same rate in the absence of air resistance.

This insight led Galileo to the conclusion that objects fall due to gravity, which acts equally on all objects regardless of their mass. He also discovered the concept of inertia, which states that an object will remain at rest or in uniform motion in a straight line unless acted upon by an external force. Galileo's work was crucial in the development of modern physics and set the stage for the later work of scientists such as Isaac Newton, who developed the laws of motion and universal gravitation based on Galileo's observations and insights.

To know more about Galileo's observations ,

https://brainly.com/question/3621544

#SPJ11

A sphere with a radius of 5 units has a volume of about 523.6 cubic units.

The quantity of space occupied within a sphere is referred to as its volume. Every point on the surface of the sphere is equally spaced from its centre, making it a three-dimensional round solid object.

The formula for the volume of a sphere is given by:

V = (4/3) * π * r³

where r is the radius of the sphere.

To calculate the volume of a sphere with a given radius, you can plug in the value of the radius into the formula and perform the necessary calculations. Here's an example:

Suppose the radius of the sphere is 5 units. Then, using the formula above, we can calculate the volume of the sphere as follows:

V = (4/3) * π * r³

= (4/3) * π * 5³

= (4/3) * π * 125

= 523.6

Therefore, the volume of the sphere with a radius of 5 units is approximately 523.6 cubic units.

Note that in the calculation above, we used (4/3) with floating-point division (represented by 4.0/3.0) to ensure that the result is a floating-point number rather than an integer.

Learn more about volume of sphere on:

https://brainly.com/question/15081174

#SPJ11

The piano tuner applies a force of approximately 704 Newtons to stretch the steel piano wire by 8.20 mm.

To calculate the force applied by a piano tuner to stretch a steel piano wire, we'll need to use Hooke's Law and the formula for the stress and strain in the wire. The terms we'll use in the calculation are:

1. Hooke's Law: F = kΔx, where F is the force, k is the spring constant, and Δx is the change in length.
2. Stress: σ = F/A, where σ is the stress, F is the force, and A is the cross-sectional area of the wire.
3. Strain: ε = Δx/L, where ε is the strain, Δx is the change in length, and L is the original length of the wire.
4. Young's modulus: E = σ/ε, where E is Young's modulus (a property of the material), σ is the stress, and ε is the strain.

First, calculate the cross-sectional area A of the wire:
A = π(d/2)^2 = π(0.860 mm / 2)^2 = π(0.430 mm)^2 ≈ 0.580 mm^2

Next, calculate the strain ε:
ε = Δx/L = (8.20 mm)/(1350 mm) ≈ 0.00607

Now, we'll use Young's modulus for steel, which is approximately 200 GPa or 200,000 MPa:
E = σ/ε ⇒ σ = E * ε = (200,000 MPa)(0.00607) ≈ 1214 MPa

Now, we can calculate the force F using the stress formula:
F = σA = (1214 MPa)(0.580 mm^2) ≈ 704 N

So, the piano tuner applies a force of approximately 704 Newtons to stretch the steel piano wire by 8.20 mm.

To know more about piano tuner click here:

https://brainly.com/question/31113111

#SPJ11

The force applied by the piano tuner to stretch the wire is approximately 563.56 N.

A is the cross-sectional area of the wire, which can be calculated using the formula for the area of a circle (πr²) given that we know the diameter of the wire (0.86 mm = 0.00086 m), and

L is the original length of the wire (1.35 m).

First, let's calculate the cross-sectional area of the wire:

r = d/2 = 0.00086 m / 2 = 0.00043 m

A = πr² = π * (0.00043 m)² = 5.81 * 10⁻⁷ m²

Now, we can substitute all of the values into the equation to find the force:

F = ΔL * Y * (A / L)

F = 0.0082 m * (200 * 10⁹ Pa) * (5.81 * 10⁻⁷ m² / 1.35 m)

F = 563.56 Newtons

So, the force applied by the piano tuner to stretch the wire is approximately 563.56 N.

Read more on force here:https://brainly.com/question/12970081

#SPJ4

To determine whether there is enough room in the barge to hold a certain amount of coal, you need to know the volume of the coal. The density of coal is about 1500 kg/m3, which means that for every cubic meter of coal, there is a mass of 1500 kilograms.

To calculate the volume of the coal, you would need to know the total mass of the coal that needs to be transported. Once you have the total mass, you can divide it by the density of coal (1500 kg/m3) to get the volume of the coal in cubic meters. Then, you can compare this volume to the capacity of the barge to see if there is enough room to hold the coal.

In the US, a typical barge size is 195 feet by 35 feet and can hold up to 1500 tons of cargo. Newer barges can be up to 209 feet by 50 feet and can hold twice as much cargo tonnage as traditional barges.

TO KNOW MORE ABOUT COAL BRAGE CLICK THIS LINK -

brainly.com/question/30560160

#SPJ11

Polymers that have a regular, symmetrical chain structure are more likely to crystallize.

This is because the regularity of the chain allows for close packing of the polymer chains, which is necessary for the formation of crystals. Additionally, polymers with higher molecular weights are more likely to crystallize because they have more chains to pack closely together. Examples of polymers that are more likely to crystallize include polyethylene, polypropylene, and polyamide. It is important to note, however, that the crystallization behavior of a polymer is influenced by a variety of factors including temperature, cooling rate, and the presence of additives.

The regularity of the chain structure allows for close packing and formation of crystals, while higher molecular weight provides more chains to pack together.

To know more about polymer visit :-

https://brainly.com/question/1602388

#SPJ11

To calculate the acceleration of the bowling ball, we can use Newton's second law of motion, which states that Force = mass × acceleration (F = ma). In this case, we have a mass (m) of 3.0 kg and a net force (F) of 8.0 N. We can rearrange the equation to find acceleration (a) as follows: a = F/m.
a = (8.0 N) / (3.0 kg) = 2.67 m/s²
Rounded to one decimal place, the acceleration is 2.7 m/s². Therefore, the correct answer is D. 2.7 m/s².

To find the acceleration of the bowling ball, we use the formula:

acceleration = net force / mass

In this case, the net force is 8.0 N and the mass is 3.0 kg. Plugging these values into the formula gives us:

acceleration = 8.0 N / 3.0 kg

Simplifying this expression gives us:

acceleration = 2.7 m/s2

Therefore, the correct answer is D. 2.7 m/s2.

To know more about acceleration click here:

https://brainly.com/question/30499732

#SPJ11

The speed of the rock is 56.8 m/s.

Wavelength, λ = 2.03 x 10⁻³⁴m

Mass of the rock, m = 115 x 10⁻³kg

So, the kinetic energy,

1/2 mv² = hc/λ

v = √(2hc/mλ)

v = √(2 x 6.63 x 10⁻³⁴/115 x 10⁻³x2.03 x 10⁻³⁴)

v = 56.8 m/s

To learn more about kinetic energy,

https://brainly.com/question/14446221

#SPJ1

The image of the small candle is formed 10.3 cm from the mirror. And the focal length of the mirror is 14 cm.

To find the focal length of the mirror, we can use the mirror formula:

1/f = 1/v + 1/u

where f is the focal length, v is the image distance, and u is the object distance.

We are given that the object (the small candle) is 39 cm from the mirror. Since the mirror is concave, the image will be real and inverted. We can use the mirror equation to find the image distance:

1/f = 1/v + 1/u
1/f = 1/v + 1/(-39 cm)
1/f = (v - 39) / (-39v)

We also know that the mirror has a radius of curvature of 28 cm. For a concave mirror, the focal length is half the radius of curvature:

f = R/2 = 28 cm / 2 = 14 cm

Substituting this into the mirror equation, we get:

1/14 = (v - 39) / (-39v)

Simplifying, we get:

-39v/14 = v - 39

Multiplying both sides by 14:

-39v = 14v - 546

Combining like terms:

53v = 546

Dividing both sides by 53:

v ≈ 10.3 cm

Therefore, the image of the small candle is formed 10.3 cm from the mirror. And the focal length of the mirror is 14 cm.

To learn more about object, refer below:

https://brainly.com/question/31018199

#SPJ11

The required force to maintain the car's motion is unchanged (B). This is because the speed of the car does not change, so the centripetal force required to keep the car moving in a circular path remains the same.

The formula for centripetal force is F = (mv^2)/r, where m is the mass of the car, v is its speed, and r is the radius of the circular path. Since v is constant and r is doubled, the force required is unchanged.
When a racecar travels in a circular path around the Daytona 500 track and the radius is doubled while the speed remains constant, the required force to maintain the car's motion is C. doubled.

To learn more about force visit;

https://brainly.com/question/13191643

#SPJ11

The underwater angle of refraction for the blue component of the light is approximately 61.49 degrees.

The underwater angle of refraction for the blue component of the light can be calculated using Snell's Law:
n1sinθ1 = n2sinθ2 where n1 is the index of refraction of the medium the light is coming from (air, in this case), θ1 is the angle of incidence, n2 is the index of refraction of the medium the light is entering (water, in this case), and θ2 is the angle of refraction.

To find the angle of refraction for the blue component of the light, we need to use the index of refraction for blue light in water, which is 1.340.

n1sinθ1 = n2sinθ2
sin(83.00o) = (1.340)sin(θ2)
sin(θ2) = sin(83.00o) / 1.340
θ2 = sin^-1(sin(83.00o) / 1.340)

Using a calculator, we get:

θ2 = 61.49o

To learn more about refraction visit;

https://brainly.com/question/14760207

#SPJ11

The correct answer is d) change in pressure * change in volume. So, the correct option is c) change in internal energy + pressure * change in volume.

Under constant pressure, the change in enthalpy (ΔH) can be represented as: ΔH = change in internal energy (ΔU) + pressure * change in volume (ΔV). So, the correct option is c) change in internal energy + pressure * change in volume.

                                                This is because under constant pressure, the change in enthalpy (ΔH) is equal to the work done by the system, which is the product of the change in pressure and the change in volume (ΔH = ΔP * ΔV).

Learn more about internal energy

brainly.com/question/14668303

#SPJ11

The period of the object attached to a spring is T. How much time does the object need to move from the equilibrium position to the full amplitude for the first time?

The period (T) of an object attached to a spring represents the time it takes for the object to complete one full oscillation (cycle) back and forth. This is because the object oscillates back and forth around the equilibrium position, and it takes half of the total time for it to reach the maximum displacement from the equilibrium position.To move from the equilibrium position to the full amplitude for the first time, the object needs to travel a quarter of the oscillation cycle.

To calculate the time it takes to reach the full amplitude, you can simply divide the period (T) by 4:

Time to reach full amplitude = T / 4

To know more about quarter of the oscillation :

https://brainly.com/question/29088712

#SPJ11

d) State variables. State variables are properties that describe the current state of a system, such as temperature, pressure, volume, and composition.

These variables are independent of how the system reached its current state and can be used to define the system's thermodynamic state.

They are used in thermodynamics to describe the state of a system at a given time.

They are important because they allow us to calculate changes in the system due to processes such as heating, cooling, or compression.

Hence, state variables are properties that describe the current state of a system, and they are important in thermodynamics for calculating changes in the system.

learn more about State variables click here:

https://brainly.com/question/29571075

#SPJ11

The minimum current needed to levitate the wire is 1.44 A.


To levitate the wire, the magnetic force on the wire must be equal to the weight of the wire. The magnetic force is given by F = BIL, where B is the magnetic field strength, I is the current, and L is the length of the wire in the magnetic field.

The weight of the wire is given by W = mg, where m is the mass of the wire and g is the acceleration due to gravity.

Setting these two forces equal to each other, we get:

BIL = mg

Solving for I, we get:

I = mg/BL

Plugging in the given values, we get:

I = (0.74 kg)(9.81 m/s²)/(0.74 T)(2.7 m)

I = 1.44 A

Therefore, the minimum current needed to levitate the wire is 1.44 A.

To know more about magnetic force  click on below link:

https://brainly.com/question/3160109#

#SPJ11

The intensity of light transmitted by two polarizing filters with axes at an angle θ and I′ is the intensity when the axes are at an angle 90.0º−θ, then I + I′ equals the original intensity I0, using the trigonometric identities provided in the hint.

The trigonometric identities cos (90.0º−θ) = sin θ and cos² θ + sin² θ = 1.

According to Malus's Law, the transmitted intensity I through two polarizing filters is given by I = I0 * cos²θ, where I0 is the initial intensity. Now, for the intensity I' when the axes are at 90.0º−θ, we can substitute θ with (90.0º−θ) in the equation:
I' = I0 * cos²(90.0º−θ)
Since cos(90.0º−θ) = sin θ, the equation becomes:
I' = I0 * sin²θ
Now, let's add I and I':
I + I' = I0 * cos²θ + I0 * sin²θ
Factor out I0:
I + I' = I0 * (cos²θ + sin²θ)
Using the trigonometric identity cos²θ + sin²θ = 1, we get:
I + I' = I0 * 1
Therefore:
I + I' = I0

Hence, We have proven that if I is the intensity of light transmitted by two polarizing filters with axes at an angle θ and I′ is the intensity when the axes are at an angle 90.0º−θ, then I + I′ equals the original intensity I0, using the trigonometric identities provided in the hint.

learn more about Malus's Law click here:

https://brainly.com/question/13722008

#SPJ11

When a raw egg is thrown against a wall, the wall is a hard and unyielding surface. The force of the impact causes the eggshell to break.

As the egg cannot withstand the sudden stop against the wall.

On the other hand, when a raw egg is thrown at a sagging sheet, the sheet provides a surface that is more forgiving. The sheet gives way when the egg hits it, and the force of the impact is spread out over a larger area.

This means that the egg does not experience the same sudden stop that it would if it hit a hard wall. Additionally, the sagging sheet provides a bit of cushioning, which also helps to absorb some of the force of the impact.

Overall, the reason why a raw egg breaks when thrown against a wall but not when thrown at a sagging sheet is due to the difference in the surfaces that the egg hits.

The hard, unyielding surface of the wall causes the egg to break, while the soft, yielding surface of the sagging sheet allows the egg to survive the impact.

learn more about surfaces here: brainly.com/question/28267043

#SPJ11

Both people will have the same magnitude of momentum. The total momentum of the two people after they push off each other will be zero. However, the larger person will experience a smaller acceleration than the smaller person due to their difference in mass.

When the two people push off each other, the total momentum of the system remains conserved.

This means that the sum of their individual momentums before the push must equal the sum of their momentums after the push. Since they start at rest, their initial momentums are zero, so their final momentums must also be zero. This means that the magnitudes of their momentums are equal but opposite in direction.

However, the acceleration experienced by each person is given by the force exerted on them divided by their mass. Since the force on each person is equal and opposite, the acceleration experienced by the larger person will be smaller than that of the smaller person due to their difference in mass. This is described by Newton's Second Law, F=ma, where the force F is constant but the acceleration a is inversely proportional to mass m.

Learn more about Newton's Second Law here:

https://brainly.com/question/13447525

#SPJ11