What is the half life of the graphed material?

Answer:

True.

Explanation:

When the number of molecules, atoms or ions of any element is in the hundreds of millions, we can safely speak of concentrations and analyze a standard behavior, and can even specify the different dilutions used, if there are dilutions. This allows analyzes to be clearly understood by any individual. However, it is not possible to do this if the number of molecules, atoms and ions is very small.

Answer:

Volume = 19.68 ml

Explanation:

The equation of the reaction is given as;

HNO3 + KOH ---> KNO3 + H2O

1 mol of HNO3 reacts 1 mol of KOH

Converting 0.276 g of KOH to mol;

Number of moles = Mass / Molar mass

Number of moles = 0.276g / 56.1056 g/mol

Number of moles = 0.00492

Since the mole relationship is 1 = 1;

This means 0.00492 mol of HNO3 reacts with 0.00492 mol of KOH

The relationship between molarity and volume id given as;

Molarity = Number of moles / Volume

Volume = Number of moles / Molarity = 0.00492 mol / 0.250 M

Volume = 0.01968 L

Volume = 19.68 ml

Answer:

It released hydroxide ions (OH ¯).

Explanation:

A PH of 8.3 indicates that the solution has become a basic solution.

Now, for us to have a basic solution from the addition of an alka-seltzer to Koolaid, it means the Alka-seltzer released plenty of hydroxide ons (OH¯) to the solution.

Answer:

See explanation

Explanation:

Rf value is known as retention factor.The retention factor of a particular material is the ratio of the distance the spot moved above the origin to the distance the solvent front moved above the origin(Harper College).

TLC is carried is out in a closed container and the interior is saturated with the solvent vapor in order to have a maximum resolution between components this prevents solvent from evaporating from the system.

Peradventure the solvent for the separation is partly or wholly  lost due to an open container, the Rf value would be lower than the expected value.

Answer: Light, Chemical

Explanation: This is the answer because "photosynthesis takes place in two stages: the light-dependent reactions and the Calvin cycle. In the light-dependent reactions, which take place at the thylakoid membrane, chlorophyll absorbs energy from sunlight and then converts it into chemical energy with the use of water." - source https://opentextbc.ca/

In the photosynthesis the energy starts as Light energy and ends up as Chemical Energy. Hence option (D) is correct

The process by that inexperienced plants and a few different organisms use daylight to synthesize nutrients from carbonic acid gas and water. chemical action in plants usually involves the inexperienced pigment and generates element as a by-product.

Photosynthesis may be a method employed by plants and different organisms to convert lightweight energy into energy that, through internal respiration, will later be discharged to fuel the organism's activities.

photosynthesis takes place in 2 stages: the light-dependent reactions and also the Calvin cycle. within the light-dependent reactions, that manifest itself at the thylakoid membrane, pigment absorbs energy from daylight and so converts it into energy with the employment of water.

Therefore, In the photosynthesis the energy starts as Light energy and ends up as Chemical Energy. Hence option (D) is correct

Learn more about Photosynthesis here ;

https://brainly.com/question/1388366

#SPJ2

Answer:

im not doing your whole homework. but ill give you  one cent ;>, whats ur paypal

Explanation:

Answer:

Crest is the highest point of a wave

When hydrogen and oxygen combine, they form water or hydrogen peroxide, and energy is released in the process.

Oxygen and hydrogen are the chemical elements of the periodic table, and they both are gas. Oxygen is the most important gas, which is needed for breathing. It is present at 21% in the atmosphere.

Hydrogen is another gas present in nature. It is the lightest gas, and it has diatomic molecules. It remains gas at normal pressure and temperature, but it becomes liquid at low temperature.

The oxygen and hydrogen readily react and for water, and hydrogen peroxide, the process of reaction of hydrogen and oxygen releases an amount of energy.

Hence, Energy is released during the creation of water or hydrogen peroxide when hydrogen and oxygen mix.

Learn more about oxygen and hydrogen, here:

https://brainly.com/question/11556976

#SPJ5

Answer:

17.54 g

Explanation:

the freezing point of the solution to -8.8°C

depression in freezing point = 8.8°C

Molal freezing point depression constant of ethylene glycol  Kf = 3.11⁰C /m

ΔTf = Kf x m , m is no of moles of solute per kg of solvent .

Let gram of ethylene glycol required be x .

moles = m / mol weight of ethylene glycol

= x / 62

100 g of water = .1 kg

moles of solute dissolved in 1 kg of water

m = x / 62 x .1

m = 10 x / 62

Using the above equation for depression in freezing point

8.8 = 3.11 x 10 x / 62

x = 17.54 g .

The mass of ethylene glycol required to lower the freezing point is 17.54 g.

The given parameters:

Molar freezing point depression constant of ethylene glycol  Kf = 3.11⁰C /m

Let the mass of ethylene glycol required be x .

The number of moles of the ethylene is calculated as follows;

[tex]n = \frac{x}{M} \\\\n = \frac{x}{62 \times 100 g \ of H_2 O}\\\\n = \frac{x}{6.2}[/tex]

Apply the following equation for depression in freezing point as follows;

[tex]\Delta T_f = n Kf\\\\8.8 = 3.11 \times \frac{x}{6.2} \\\\3.11 x = 54.56\\\\x = \frac{54.56}{3.11} \\\\x = 17.54 \ g[/tex]

Thus, the mass of ethylene glycol required to lower the freezing point is 17.54 g.

Learn more about depression of freezing point here: https://brainly.com/question/2292439

Answer:

depends on what molecule you are looking for

Explanation:

In one mole of stuff (atoms, molecules, eggses), there are NA individual items of that stuff. So, there are 4.5 × NA BCl3 molecules; i.e. 4.5 × 6.022×1023 ≅ 27×1023 individual molecules of BCl3

Answer:

The basic building blocks that make up matter are called atoms.

I hope it's helpful!

Answer:

7.08

Explanation:

To solve this problem we'll use the Henderson-Hasselbach equation:

Where [tex]\frac{[A^-]}{[HA]}[/tex] is the ratio of [sodium formate]/[formic acid] and pka is equal to -log(Ka), meaning that:

We input the data:

And solve for [tex]\frac{[A^-]}{[HA]}[/tex]:

The ratio of [sodium formate] to [formic acid] needed to make the buffer is 7.08

pKa = –Log Ka

pKa = –Log 1.8×10¯⁴

pKa = 3.74

pH = pKa + Log[sodium formate]/[formic acid]

4.59 = 3.74 + Log[sodium formate]/[formic acid]

Collect like terms

4.59 – 3.74 = Log[sodium formate]/[formic acid]

0.85 = Log[sodium formate]/[formic acid]

Take the anti-log of 0.85

[sodium formate]/[formic acid] = anti-log 0.85

[sodium formate]/[formic acid] = 7.08

Learn more about pH of buffer:

https://brainly.com/question/3709867

Answer:

See explanation below

Explanation:

Let's answer this by parts.

a) As the reaction is naturally exothermic (Exerts heat), increasing temperature means that the reaction will move forward the direction where its absorbing heat

, so the equilibrium will be favored to the reactant side.

b) In this case, the addition of CO, which is a reactant will favor the reaction to the product side. This is because putting more quantity in the reactants will cause that the equilibrium constant K, increase it's innitial value, and this favors the product side.

c) In this case, it happens something similar to case b. This will cause that the reaction will have to work to cover the loss of methanol, therefore, equilibrium will move to the product side too.

d) In this case, we are adding another substance that reacts with CO, so it means that the other reactant is being removed, therefore, the reaction will work to cover this loss but also to cover the adding of the new substance, causing that the K decrease it's value, so equilibrium will be favored to the reactants side.

Hope this helps

Answer:

2.place value is 70 000 00

Answer:

2Fe + 6HC2H3O2 → 2Fe(C2H3O2)3 + 3H2

Explanation:

There you go

Answer:

Hellium (He): 1s2

Nitrogen (N): 1s2 2s2 2p6

Silicon (Si): 1s2 2s2 2p6 3s2 3p2

The orbital configuration of following elements is as follows:i) helium- 1 s² ii)nitrogen- 1 s² 2 s²  2 p³ iii)silicon-1 s² 2 s² 2 p⁶ 3 s² 3 p²

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.

Learn more about elements,here:

https://brainly.com/question/14347616

#SPJ2

Answer: hope this helps

Explanation: I’m not sure but after some research here’s what I gathered The molecule has 3 calcium atoms, 2 phosphate atoms and 8 O atoms in it also rate this and pls thank me follow and as as many questions as you need.

Answer:

D H2PO4– + HPO42–

Explanation:

The acid dissociation constant for [tex]\mathbf{H_3PO_4 , H_2PO^{-}_4 , HPO_4^{2-}}[/tex] are [tex]\mathbf{7\times 10^{-3}, \ \ 8\times 10^{-8} ,\ \ 5\times 10^{-13}}[/tex] respectively.

[tex]\mathbf{pka (H_3PO_4) = -log (7\times 10^{-3} )=2.2}[/tex]

[tex]\mathbf{pka (H_2PO_4^-) = -log (8\times 10^{-8} )=7.1}[/tex]

[tex]\mathbf{pka (HPO_4^{2-}) = -log (5\times 10^{-13} )=12.3}[/tex]

The reason while option D is the best answer is that, the value of pKa for both

[tex]\mathbf{H_2PO^{-}_4 ,\ \& \ HPO_4^{2-}}[/tex] lies on either side of the desired pH of the buffer. This implies that one is slightly over and the other is slightly under.

Using Henderson-Hasselbach equation:

[tex]\mathbf{pH = pKa + log \Big( \dfrac{HPO_4^{2-}}{H_2PO_4^-} \Big)}[/tex]

The compounds that are used for the formulation of the pH 9 buffer are [tex]\rm H_2PO_4^-\;and\;HPO_4^+[/tex]. Thus, option D is correct.

The buffers are the solutions of acids and base of appropriate pH, that are able to limit the change in pH in the reaction mixture.

The buffer pH is adjusted with the compounds that has been able to add base or acid to the solution.

For the formulation of buffer of specific pH, the acid and base solutions are required.

The compounds that are used for the formulation of the pH 9 buffer are [tex]\rm H_2PO_4^-\;and\;HPO_4^+[/tex], as they are able to provide acid and base to the solution.

Thus, option D is correct.

Learn more about buffers, here:

https://brainly.com/question/1423164

Answer: A chemical compound can be described as substance composed of atoms from more than one element held together by chemical bonds in a fixed stoichiometric proportion. A compound has different physical and chemical properties from its constituent elements.

For example : compound water is made up of H and O bonded together and it has different properties from O and H.

Thus, among the given options, the one coreectly describing a compound is

a) The atoms are bonded together, and the compound has different physical and chemical properties than the individual elements.

Answer:

0.01 M

Explanation:

NaOH (sodium hydroxide) is a strong base, so it is completely dissociated into ions in aqueous solution:

NaOH ⇄ Na⁺ + OH⁻

So, we have OH⁻ ions in solution.

From the problem, we have the pH value. The pH is calculated as:

pH = -log [H⁺]

As NaOH is a base, we can also calculate the pOH:

pOH = -log [OH⁻]

Thus. we can use the relation between pH and pOH to calculate the pOH and then use it to calculate [OH⁻]:

pH + pOH = 14 ⇒ pOH = 14 - pH = 14 - 12.05 = 1.95

pOH = -log [OH⁻] ⇒ [OH⁻] = [tex]10^{-pOH}[/tex]= [tex]10^{1.95}[/tex]= 0.0112 M ≅ 0.01 M

Answer:

0.0112

Explanation:

They said that was the answer.

Answer:

3iron + chlorine=iron3 chloride

nitrogen +3hydrogen

Answer:

a) Iron + chlorine → Iron (iii) chloride

3fe+cl__fe3cl

b) Nitrogen + hydrogen → Ammonia

2N+3h2------2NH3

c) Phosphoric acid + sodium carbonate → sodium phosphate + water + carbon dioxide

2H3PO3+3Na2CO3-----2Na3PO4+3H2O+3CO2

d) Nitrogen dioxide + water + oxygen → Nitric acid

NO2+H2O+O2--NOH

sorry if mistake

Answer:

Classifications according to mandatory, discretionary, or originator controlled policy, or a combination thereof:

a. Mandatory

b. Originator

c. Discretionary

d. Mandatory and Originator combined

Explanation:

a) Mandatory control means that access to the UNIX operating system is restricted.

b) Originator controlled policy implies that the memorandum cannot be distributed without the author's consent or permission.

c) Discretionary means that only certain authorized users, for example, generals, can access the particular room.

d) Combined Mandatory and Originator means that while access is restricted to some people, the originator's consent is still required before access can be granted to the faculty member.

Answer: 190.9K

Explanation:

5.6(14) = 5(.0821)T  or  (5.6*14)/(5(.0821))

78.4 = 0.4105T

190.9K = T

Answer:

See answer below

Explanation:

In this case, let's draw the butane molecule:

CH₃ - CH₂ - CH₂ - CH₃

According to what the exercise states, we removed an atom of hydrogen from the frist carbon. This could be any of the terminals. I'll grab the first from left to right.

CH₂⁺ - CH₂ - CH₂ - CH₃

When this happens, the atom of carbon is lacking one space and it forms a carbocation.

Followed this step, an hydroxile group replace the atom of hydrogen. The hydroxile is the OH, and when we have an alkane with an OH group in the molecule, we are actually converting this molecule into an alcohol, therefore the molecule formed is:

Hope this helps

Answer: [tex]K_a[/tex] for the acid is [tex]3.34\times 10^{-4}[/tex]

Explanation:

[tex]HC_9H_7O_4\rightarrow H^+C_9H_7O_4^-[/tex]

 cM              0             0

[tex]c-c\alpha[/tex]        [tex]c\alpha[/tex]          [tex]c\alpha[/tex]  

Give c = 0.328 M and [tex]pH=1.987[/tex]

[tex]1.987=-log[H^+][/tex]

[tex][H^+]=0.0103[/tex]

[tex][H^+]=c\times \alpha[/tex]

[tex]0.0103=0.328\times \alpha[/tex]

[tex]\alpha=0.0314[/tex]

So dissociation constant will be:

[tex]K_a=\frac{(c\alpha)^{2}}{c-c\alpha}[/tex]

Putting in the values we get:

[tex]K_a=\frac{(0.328\times 0.0314)^2}{(0.328-0.328\times 0.0314)}[/tex]

[tex]K_a=3.34\times 10^{-4}[/tex]

Answer: 0.0450 moles of [tex]CaCl_2[/tex]

Explanation:

According to avogadro's law, 1 mole of every substance weighs equal to its molecular mass and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]

[tex]\text{Number of moles of} CaCl_2=\frac{5.00g}{110.98g/mol}=0.0450moles[/tex]

Thus there are 0.0450 moles of [tex]CaCl_2[/tex]

Answer:

violet

Explanation:

just violet

oh and you spelled "COLER" wrong, its color or colour if you live somewhere else