What is the empirical foula of the compound with the following compositions: 2.1 percent H,32.6 percent S,65.3 percent O ? What is the empirical foula of the compound with the following compositions: 2.1 percent H,32.6 percent S,65.3 percent O ?

The question asks about converting a fraction into an angle for a pie chart. You multiply the fraction (7/15) by the total degrees in a circle (360 degrees) which gives you approximately 168 degrees.

The subject is tied to the understanding of how data is represented in pie charts, specifically how fractions or percentages can be expressed in terms of angles in a pie chart. This question pertains to the interpretation of pie charts in mathematics, more specifically to fundamental aspects of geometry and data representation.

First, we must understand that a pie chart is a circular chart divided into sectors or 'pies', where the arc length of each sector (and consequently its central angle and area), is proportional to the quantity it represents. So the total measurement for a pie chart is 360 degrees - the same as a full circle. When you have a fraction like 7/15, it represents a portion of the whole. To convert this fraction into an angle for the pie chart, we need to multiply it by the total degrees in a circle.

So, the calculation would be (7/15) * 360. When you do the math, you get around 168 degrees. So if the information 7/15 was shown on a pie chart, it would open up an angle of approximately 168 degrees.

https://brainly.com/question/36809318

#SPJ11

Rounding up to the next whole number, we get a required sample size of n = 62 pizzas.

To determine the required sample size, we need to use the formula:

n = (z*(σ/E))^2

where:

n is the required sample size

z is the z-score corresponding to the desired level of confidence (in this case, 99% or 2.576)

σ is the population standard deviation

E is the maximum error of the estimate (in this case, $0.137)

Substituting the given values, we get:

n = (2.576*(0.29/0.137))^2

n ≈ 61.41

Rounding up to the next whole number, we get a required sample size of n = 62 pizzas.

Learn more about  number  from

https://brainly.com/question/27894163

#SPJ11

By calculating the PMFs for different expected rates, you can determine the probability of specific numbers of occurrences happening in a given situation.

The probability mass function (PMF) for the Poisson distribution is given by the formula:

[tex]\[P(X=k) = \frac{{e^{-\lambda} \cdot \lambda^{k}}}{{k!}}\][/tex]

Where:
- X represents the random variable that counts the number of occurrences.
- k represents a specific value of the random variable X.
- λ is the expected rate of occurrences.

To find the PMF for different expected rates of occurrences (a, b, and c), you need to substitute the respective values of λ into the formula. For example, if the expected rate is a, the PMF will be:

[tex]\[P(X=k) = \frac{{e^{-a} \cdot a^{k}}}{{k!}}\][/tex]

Similarly, for b and c, substitute the values of b and c into the formula to calculate the PMFs.

Remember that the factorial function (k!) represents the product of all positive integers up to k. For example, 4! = 4 * 3 * 2 * 1 = 24.

Learn more about  Poisson distribution from the given link:

https://brainly.com/question/30388228

#SPJ11

Not Equal function returns 1 if x and y are not equal and it returns 0 if x and y are equal. The given function is to be modified to provide the correct output.

The given function is int is Not Equal (int x, int y){ return 2; \}The function should be modified to return 1 only when x and y are not equal. So, we need to find a logical operator that will return true when x and y are not equal and we can use this operator to return the desired output.

There are several logical operators such as &, |, ^, ~ etc. However, since the maximum number of operators allowed is 6, we can only use one operator. Therefore, we can use the XOR operator (^) to return the desired output. The XOR operator returns true (1) only when the two operands are different and returns false (0) when the operands are the same. Thus, we can use the XOR operator to check if x and y are equal or not.

To know more about function visit.

https://brainly.com/question/30721594

#SPJ11

a. The function representing the new amount allotted for each family is g(x) = x + P^(1), 500.00.

b. The amount of each relief pack will be P^(3), 500.00.

a. The function representing the new amount allotted for each family, g(x), can be constructed as follows:

g(x) = x + P^(1), 500.00

Here, x represents the initial budget allotted for each family, and P^(1), 500.00 represents the additional amount provided by the sponsor.

b. To determine the amount of each relief pack, we need to know the initial budget allotted for each family (represented by x) and the additional amount provided by the sponsor (P^(1), 500.00).

Let's assume the initial budget allotted for each family is x = P^(2), 000.00.

Using the function g(x) = x + P^(1), 500.00, we can substitute the value of x:

g(P^(2), 000.00) = P^(2), 000.00 + P^(1), 500.00

Simplifying the expression, we get:

g(P^(2), 000.00) = P^(3), 500.00

Therefore, the amount of each relief pack after the sponsor's additional contribution will be P^(3), 500.00.

To know more about relief packs, refer here:

https://brainly.com/question/30431088#

#SPJ11

The broadcasters sold 68 ad slots for $152 million, resulting in a total revenue of $152 million. To find the mean price per ad slot, divide the total revenue by the number of ad slots sold. The formula is μ = Total Revenue / Number of Ad Slots sold, resulting in a mean price of $2.2 million.

For a large sporting event, the broadcasters sold 68 ad slots for a total revenue of $152 million. The task is to find the mean price per ad slot. The mean price per ad slot was $2.2 million. (Round to one decimal place as needed.)The formula for the mean of a sample is given below:

μ = (Σ xi) / n

Where,μ represents the mean of the sample.Σ xi represents the summation of values from i = 1 to i = n.n represents the total number of values in the sample.

The mean price per ad slot can be found by dividing the total revenue by the number of ad slots sold. We are given that the number of ad slots sold is 68 and the total revenue is $152 million.

Let's put these values in the formula.

μ = Total Revenue / Number of Ad Slots sold

μ = $152 million / 68= $2.23529411764

The mean price per ad slot is $2.2 million. (Round to one decimal place as needed.)

Therefore, the mean price per ad slot is $2.2 million.

To know more about mean Visit:

https://brainly.com/question/31101410

#SPJ11

The average number of left-handed people from the simulations is 10.8. The number 10 is consistent with the actual percentage of left-handedness, which is 10 percent.

Conducting the simulation:First, the simulation of left-handedness is conducted according to the description provided

The simulation was conducted on a random sample of 150 people. The simulated percentage of left-handedness was 9.33 percent. This percentage is different from the 10 percent real value.

The simulated percentage is lower than the real value. A simulation of 150 people is insufficient to generate a precise estimate of left-handedness. The percentage may be off by a few percentage points. It is impossible to predict the exact outcome of a simulation.

The results of a simulation may deviate significantly from the real value. The discrepancy between the simulated and actual percentage of left-handedness could have occurred due to a variety of reasons. A simulation can provide an estimate of a population's parameters.

However, the simulation's estimate will be subject to errors and inaccuracies. A sample's size, randomness, and representativeness may all have an impact on the accuracy of a simulation's estimate.

Repeating the simulation:Based on the instructions provided, the simulation is repeated ten times.

The number of left-handed people in each of the ten simulations is recorded. The results of the ten simulations are as follows:

16, 9, 11, 9, 13, 10, 10, 10, 10, and 10.

The average number of left-handed people from the simulations is 10.8. The number 10 is consistent with the actual percentage of left-handedness, which is 10 percent.

Based on the simulation's results, it is not improbable to choose 15 individuals at random and not find any left-handed people. It is possible because the number of left-handed people varies with each simulation.

The percentage of left-handed people from the simulation is not very close to the actual value. This is because a simulation's accuracy is affected by the sample's size, randomness, and representativeness. The simulation was repeated ten times to obtain a more accurate estimate of left-handedness. The average number of left-handed people from the simulations is 10.8, which is consistent with the actual percentage of 10%. Based on the simulations' results, it is possible to randomly select 15 individuals and not find any left-handed people.

To know more about percentage visit:

brainly.com/question/29284499

#SPJ11

Mean, µx = µ = 118, Variance, σ2x = σ2/n = 4^2/1530 = 0.0001044 and Standard Deviation, σx = σ/√n = 4/√1530 = 0.1038

Sampling Distribution of the Sample Mean:

Suppose that we will take a random sample of size n from a population having mean µ and standard deviation σ.

The sampling distribution of the sample mean is a probability distribution of all possible sample means.

Statistics for each question:

(a) µ = 12, σ = 5, n = 28

(b) µ = 539, σ = .4, n = 96

(c) µ = 7, σ = 1.0, n = 7

(d) µ = 118, σ = 4, n = 1,530

(a) Mean, µx = µ = 12, Variance, σ2x = σ2/n = 5^2/28 = 0.8929 and Standard Deviation, σx = σ/√n = 5/√28 = 0.9439

(b) Mean, µx = µ = 539, Variance, σ2x = σ2/n = 0.4^2/96 = 0.0001667 and Standard Deviation, σx = σ/√n = 0.4/√96 = 0.0408

(c) Mean, µx = µ = 7, Variance, σ2x = σ2/n = 1^2/7 = 0.1429 and Standard Deviation, σx = σ/√n = 1/√7 = 0.3770

(d) Mean, µx = µ = 118, Variance, σ2x = σ2/n = 4^2/1530 = 0.0001044 and Standard Deviation, σx = σ/√n = 4/√1530 = 0.1038

Learn more about Sampling Distribution visit:

brainly.com/question/31465269

#SPJ11

[tex]\(E[Y] = a + bE[X]\)[/tex], which shows that the expected value of [tex]\(Y\)[/tex] is equal to [tex]\(a + b\)[/tex] times the expected value of [tex]\(X\)[/tex].

To show that [tex]\(E[Y] = a + bE[X]\)[/tex], we need to calculate the expected value of the random variable [tex]\(Y\)[/tex] and demonstrate that it is equal to [tex]\(a + b\)[/tex]times the expected value of [tex]\(X\)[/tex].

The expected value of a discrete random variable is calculated as the sum of each possible value multiplied by its corresponding probability. Let's denote the set of possible values of [tex]\(X\)[/tex] as [tex]\(x_i\)[/tex] with corresponding probabilities [tex]\(P(X=x_i)\)[/tex].

The random variable[tex]\(Y = a + bX\)[/tex] can be expressed as a linear transformation of [tex]\(X\)[/tex] with scaling factor [tex]\(b\)[/tex] and translation [tex]\(a\)[/tex].

Now, let's calculate the expected value of  [tex]\(Y\)[/tex]:

[tex]\(E[Y] = \sum_{i} (a + b x_i) P(X=x_i)\)[/tex]

Using the linearity of expectation, we can distribute the summation and calculate it separately for each term:

[tex]\(E[Y] = \sum_{i} a P(X=x_i) + \sum_{i} b x_i P(X=x_i)\)[/tex]

The first term [tex]\(\sum_{i}[/tex] a [tex]P(X=x_i)\)[/tex]simplifies to [tex]\(a \sum_{i} P(X=x_i)\)[/tex], which is [tex]\(a\)[/tex] times the sum of the probabilities of [tex]\(X\)[/tex]. Since the sum of probabilities equals 1, this term becomes [tex]\(a\)[/tex].

The second term [tex]\(\sum_{i} b x_i P(X=x_i)\)[/tex] is equal to [tex]\(b\)[/tex] times the expected value of [tex]\(X\), \(bE[X]\)[/tex].

Learn more about expected value here :-

https://brainly.com/question/28197299

#SPJ11

Given that 70% of all Americans are homeowners. If 47 Americans are randomly selected, we need to find the probability that exactly 32 of them are homeowners.

The probability distribution is binomial distribution, and the formula to find the probability of an event happening is:

P (x) = nCx * px * q(n - x)Where, n is the number of trialsx is the number of successesp is the probability of successq is the probability of failure, and

q = 1 - pHere, n = 47 (47 Americans are randomly selected)

Probability of success (p) = 70/100

= 0.7Probability of failure

(q) = 1 - p

= 1 - 0.7

= 0.3To find P(32), the probability that exactly 32 of them are homeowners,

we plug in the values:nCx = 47C32

= 47!/(32!(47-32)!)

= 47!/(32! × 15!)

= 1,087,119,700

px = (0.7)32q(n - x)

= (0.3)15Using the formula

,P (x) = nCx * px * q(n - x)P (32)

= 47C32 * (0.7)32 * (0.3)15

= 0.1874

Hence, the probability that exactly 32 of them are homowner are 0.1874

to know more about binomial distribution

https://brainly.com/question/33625582

#SPJ11

The perimeter of DREPFQ is 1

In an equilateral triangle, the intersection is the centroid

From the information given, we have that;

AB =√3

Then, we can say that;

AG = BG = CG = √3/3

Also, we have that D, E, and F are the midpoints of the sides of triangle Then, DE = EF = FD = √3/2.

AP = BP = CP = √3/6.

To find the perimeter of DREPFQ, we need to add up the lengths of the line segments DQ, QE, ER, RF, FP, and PD.

The perimeter of DREPFQ is √3/6 × √3/2)

Multiply the value, we get;

√3× √3/ 6 × 2

Then, we get;

3/18

divide the values, we have;

= 0.167

Multiply this by six sides;

= 1

Learn more about centroid at: https://brainly.com/question/7644338

#SPJ4

The complete question:

G is the centroid of equilateral Triangle ABC. D,E, and F are midpointsof the sides as shown. P,Q, and R are the midpoints of line AG,line BG and line CG, respectively. If AB= sqrt 3, what is the perimeter of DREPFQ

The coefficient of the term 9x^7 is 9. In the given polynomial expression, the term 9x^7 represents the product of the coefficient (9) and the variable raised to the power of 7 (x^7).

In the polynomial expression 9x^7 + x^5 - 3x^3 + 6, each term consists of a coefficient and a variable raised to a certain power. The coefficient represents the numerical factor multiplied by the variable term. In the term 9x^7, the coefficient is 9. This means that the variable x is multiplied by 9 raised to the power of 7, resulting in 9x^7.

The coefficient of a term determines the scale or magnitude of that term within the polynomial expression. It indicates the amount by which the term contributes to the overall value of the expression. In this case, the coefficient of 9 in 9x^7 implies that the term 9x^7 has a greater impact on the polynomial's value compared to other terms, such as x^5, -3x^3, and 6.

To know more about coefficient refer here:

https://brainly.com/question/13431100

#SPJ11

The following statements are true:

1. During the first 10 days the professor's standard deviation was more than 0.

4. It is impossible to tell anything about the professor's standard deviation for the first 10 days.

6. Considering all 11 days, the professor's standard deviation was higher than the standard deviation of the first 10 days.

The standard deviation is a measure of how spread out a set of data is. In this case, the data is the prices of the value meals that the professor orders. If all 10 of the first meals cost $5.39, then the standard deviation would be 0.

This is because there is no variation in the data. However, on the 11th day, the professor orders a meal that costs $4.38. This adds variation to the data, which means that the standard deviation will be greater than 0.

Learn more about standard deviation

https://brainly.com/question/475676

#SPJ4

Given that, the graph of y - F(x) is the result of applying the following transformations to the graph of v = 1² + 2r.Therefore, the function F(n) can be determined by applying the inverse of these transformations.

The correct option is (C)

The graph of v = 1² + 2r is a parabola.

To stretch it horizontally by a factor of 4, replace r with r/4: v = 1² + 2r/4²

or v = 1 + r/8.

Now, shifting the graph down by 7 units means replacing v with (v - 7): v - 7 = 1 + r/8

or v = r/8 + 8.

Finally, shifting the graph 3 units to the left means replacing r with (r + 3): v = (r + 3)/8 + 8

or v = (r + 24)/8.

The function F(n) is given by F(n) = (n + 24)/8.

We know that the graph of v = 1² + 2r is a parabola. Then the transformations of the graph are as follows: To stretch the graph horizontally by a factor of 4, we replace r with r/4: v = 1² + 2r/4²

or v = 1 + r/8.

Now, shift the resulting graph 7 units down by replacing v with (v - 7): v - 7 = 1 + r/8

or v = r/8 + 8.

Finally, shift the resulting graph 3 units to the left by replacing r with (r + 3): v = (r + 3)/8 + 8

or v = (r + 24)/8.

Thus, the function F(n) is given by F(n) = (n + 24)/8. To determine the function F(n) with the given graph, we need to apply the inverse transformations of the graph. First, we stretch the graph horizontally by a factor of 4. This can be done by replacing r with r/4, which gives v = 1² + 2r/4²

or v = 1 + r/8.

Next, we shift the resulting graph down 7 units by replacing v with (v - 7), which gives v - 7 = 1 + r/8

or v = r/8 + 8.

Finally, we shift the resulting graph 3 units to the left by replacing r with (r + 3), which gives v = (r + 3)/8 + 8

or v = (r + 24)/8.

Therefore, the function F(n) is given by F(n) = (n + 24)/8.

To know more about graph visit:

https://brainly.com/question/17267403

#SPJ11

Answer:  x < -5

The graph has an open hole at -5 and shading to the left

The graph is below.

=====================================================

Work Shown:

-3x - 10 > 5

-3x > 5+10

-3x > 15

x < 15/(-3) ... inequality sign flips

x < -5

The inequality sign flips whenever we divide both sides by a negative number.

The graph has an open hole at -5 with shading to the left.

The open hole means "exclude this endpoint from the solution set".

The mean > the median > the mode in a data set, the data is skewed to the right.

If the mean is greater than the median and the mode in a data set, the data is said to be skewed to the right. This is a unimodal distribution.

Explanation: If the mean is greater than the median and the mode in a data set, the data is said to be skewed to the right. The mean is pulled in the direction of the tail, and as a result, it is larger than the median. In this scenario, the mode is smaller than the median and the mean, indicating that the tail is on the right-hand side.

Conclusion: If the mean > the median > the mode in a data set, the data is skewed to the right.

To know more about median visit

https://brainly.com/question/300591

#SPJ11

The average rate of change on each of the given intervals and the estimate of the instantaneous rate of change of f(x) at x = -4 is calculated and the answer is found to be -∞.

Given f(x)=−6+x², we have to calculate the average rate of change on each of the given intervals.

Using the formula, The average rate of change of f(x) over the interval [a,b] is given by:  f(b) - f(a) / b - a

(a) The average rate of change of f(x) over the interval [-4, -3.9] is given by: f(-3.9) - f(-4) / -3.9 - (-4)f(-3.9) = -6 + (-3.9)² = -6 + 15.21 = 9.21f(-4) = -6 + (-4)² = -6 + 16 = 10

The average rate of change = 9.21 - 10 / -3.9 + 4 = -0.79 / 0.1 = -7.9

(b) The average rate of change of f(x) over the interval [-4, -3.99] is given by: f(-3.99) - f(-4) / -3.99 - (-4)f(-3.99) = -6 + (-3.99)² = -6 + 15.9601 = 9.9601

The average rate of change = 9.9601 - 10 / -3.99 + 4 = -0.0399 / 0.01 = -3.99

(c) The average rate of change of f(x) over the interval [-4, -3.999] is given by:f(-3.999) - f(-4) / -3.999 - (-4)f(-3.999) = -6 + (-3.999)² = -6 + 15.996001 = 9.996001

The average rate of change = 9.996001 - 10 / -3.999 + 4 = -0.003999 / 0.001 = -3.999

(d) Using (a) through (c) to estimate the instantaneous rate of change of f(x) at x = -4, we have

f'(-4) = lim h → 0 [f(-4 + h) - f(-4)] / h= lim h → 0 [(-6 + (-4 + h)²) - (-6 + 16)] / h= lim h → 0 [-6 + 16 - 8h - 6] / h= lim h → 0 [4 - 8h] / h= lim h → 0 4 / h - 8= -∞.

Learn more about instantaneous rate of change

https://brainly.com/question/30760748

#SPJ11

a. The decision rule for a significance level of 0.10 is to reject the null hypothesis if the test statistic is greater than the critical value or if the p-value is less than 0.10.

b. To compute the value of the test statistic, we can use the formula:

Test statistic = (sample proportion - hypothesized proportion) / standard error

Given that the sample proportion is p = 0.87, the hypothesized proportion is p₀ = 0.83, and the sample size is n = 100, the standard error can be calculated as:

Standard error = sqrt((p₀ * (1 - p₀)) / n)

Plugging in the values, we get:

Standard error = sqrt((0.83 * (1 - 0.83)) / 100) ≈ 0.0367

Now, we can calculate the test statistic:

Test statistic = (0.87 - 0.83) / 0.0367 ≈ 1.092

c. To make a decision regarding the null hypothesis, we compare the test statistic to the critical value or compare the p-value to the significance level (0.10 in this case). If the test statistic is greater than the critical value or the p-value is less than 0.10, we reject the null hypothesis. Otherwise, we fail to reject the null hypothesis.

Since the value of the test statistic is approximately 1.092, we compare it to the critical value or calculate the p-value to determine the decision.

Learn more about null hypothesis here:

https://brainly.com/question/31816995

#SPJ11

Nearest Neighbor (NN) technique is a straightforward and robust classification algorithm that requires no training data and is useful for determining which class a new sample belongs to.

The classification rule of this algorithm is to assign the class label of the nearest training instance to a new observation, which is determined by the Euclidean distance between the new point and the training samples.To determine how many measurements will be correctly classified, let's go step by step:Let's use the first four measurements in each class for training, and the last three measurements for testing.```

Class 1: train = (0.4003,0.3985,0.3998,0.3997) test = (0.4015,0.3995,0.3991)
Class 2: train = (0.2554,0.3139,0.2627,0.3802) test = (0.3247,0.3360,0.2974)
Class 3: train = (0.5632,0.7687,0.0524,0.7586) test = (0.4443,0.5505,0.6469)```

We need to determine the class label of each test instance using the nearest neighbor rule by calculating its Euclidean distance to each training instance, then assigning it to the class of the closest instance.To do so, we need to calculate the distances between the test instances and each training instance:```
Class 1:
0.4015: 0.0028, 0.0020, 0.0017, 0.0018
0.3995: 0.0008, 0.0010, 0.0004, 0.0003
0.3991: 0.0004, 0.0006, 0.0007, 0.0006

Class 2:
0.3247: 0.0694, 0.0110, 0.0620, 0.0555
0.3360: 0.0477, 0.0238, 0.0733, 0.0442
0.2974: 0.0680, 0.0485, 0.0353, 0.0776

Class 3:
0.4443: 0.1191, 0.3246, 0.3919, 0.3137
0.5505: 0.2189, 0.3122, 0.4981, 0.2021
0.6469: 0.0837, 0.1222, 0.5945, 0.1083```We can see that the nearest training instance for each test instance belongs to the same class:```
Class 1: 3 correct
Class 2: 3 correct
Class 3: 3 correct```Therefore, we have correctly classified all test instances, and the accuracy is 100%.

To know more about Euclidean visit:

https://brainly.com/question/31120908

#SPJ11

To calculate the probability that your neighbor is a Republican given the information that they own a gun, we can use Bayes' theorem.

Let's define the following events:

A: Neighbor is a Republican

B: Neighbor owns a gun

We are given:

P(A) = 0.55 (probability that a resident is a Republican)

P(B|A) = 0.40 (probability that a Republican owns a gun)

P(B|not A) = 0.20 (probability that a Democrat owns a gun)

We want to find P(A|B), which is the probability that your neighbor is a Republican given that they own a gun.

According to Bayes' theorem:

P(A|B) = (P(B|A) * P(A)) / P(B)

To find P(B), the probability that a randomly chosen person owns a gun, we can use the law of total probability:

P(B) = P(B|A) * P(A) + P(B|not A) * P(not A)

P(not A) represents the probability that a resident is not a Republican, which is equal to 1 - P(A).

Substituting the given values, we can calculate P(A|B):

P(A|B) = (P(B|A) * P(A)) / (P(B|A) * P(A) + P(B|not A) * P(not A))

P(A|B) = (0.40 * 0.55) / (0.40 * 0.55 + 0.20 * (1 - 0.55))

Calculating the expression above will give us the probability that your neighbor is a Republican given that they own a gun.

Learn more about Bayes' theorem here:

https://brainly.com/question/33143420

#SPJ11

we can conclude that if E and F are disjoint events, then the probability of E or F occurring is given by P(E or F) = P(E) + P(F) using the formula mentioned in the question.

If E and F are disjoint events, the probability of E or F occurring is given by the formula P(E or F) = P(E) + P(F).

To understand this concept, let's consider an example:

Suppose E represents the event of getting a 4 when rolling a die, and F represents the event of getting an even number when rolling the same die. Here, E and F are disjoint events because getting a 4 is not an even number. The probability of getting a 4 is 1/6, and the probability of getting an even number is 3/6 or 1/2.

Therefore, the probability of getting a 4 or an even number is calculated as follows:

P(E or F) = P(E) + P(F) = 1/6 + 1/2 = 2/3.

This formula can be extended to three or more events, but when there are more than two events, we need to subtract the probabilities of the intersection of each pair of events to avoid double-counting. The extended formula becomes:

P(A or B or C) = P(A) + P(B) + P(C) - P(A and B) - P(B and C) - P(C and A) + P(A and B and C).

The formula in the question, P(E or F) = P(E) + P(F) - P(E and F), is a simplified version when there are only two events. Since E and F are disjoint events, their intersection probability P(E and F) is 0. Thus, the formula simplifies to:

P(E or F) = P(E) + P(F) - P(E and F) = P(E) + P(F) - 0 = P(E) + P(F).

To know more about probability Visit:

https://brainly.com/question/32004014

#SPJ11

Answer:

  a) see attached

  b) 15015 meters

Step-by-step explanation:

You want the voltage, current, resistance, and power for each component of the circuit shown in the diagram.

The relevant circuit relations are ...

Given current and resistance for element 1, we immediately know its voltage is ...

  V = IR = (4)(10) = 40 . . . . volts

Given the voltage on element 3, we know that parallel element 2 has the same voltage: 30 volts.

Given the voltage at T is 90 volts, the sum of voltages on elements 1, 2, and 4 must be 90 volts. That means the voltage on element 4 is ...

  90 -(40 +30) = 20

The current in elements 1, 4, and T are all the same, because these elements are in series. They are all 4 amperes.

That 4 ampere current is split between elements 2 and 3. The table tells us that element 2 has a current of 1 ampere, so element 3 must have a current of ...

  4 - 1 = 3 . . . . amperes

The resistance of each element is the ratio of voltage to current:

  R = V/I

Dividing the V column by the I column gives the values in the R column.

Note that power source T does not have a resistance of 22.5 ohms. Rather, it is supplying power to a circuit with an equivalent resistance of 22.5 ohms.

Power is the product of voltage and current. Multiplying the V and I columns gives the value in the P column.

Note that the power supplied by the source T is the sum of the powers in the load elements.

We found that the transmitter is receiving a power of 90 watts, so its operating frequency is ...

  (90 W)×(222 Hz/W) = 19980 Hz

Then the wavelength is ...

  λ = c/f

  λ = (3×10⁸ m/s)/(19980 cycles/s) ≈ 15015 m/cycle

The wavelength of the broadcast is about 15015 meters.

__

Additional comment

The voltage and current relations are "real" and used by circuit analysts everywhere. The relationship of frequency and power is "made up" specifically for this problem. You will likely never see such a relationship again, and certainly not in "real life."

Kirchoff's voltage law (KVL) means the sum of voltage rises (as at T) will be the sum of voltage drops (across elements 1, 2, 4).

Kirchoff's current law (KCL) means the sum of currents into a node is equal to the sum of currents out of the node. At the node between elements 1 and 2, this means the 4 amps from element 1 into the node is equal to the sum of the currents out of the node: 1 amp into element 2 and the 3 amps into element 3.

As with much of math and physics, there are a number of relations that can come into play in any given problem. You are expected to remember them all (or have a ready reference).

<95141404393>

The next term in the sequence is 85.

To find the next term in the sequence 3, -1, -7, 41, x, we need to identify the pattern or rule governing the sequence.

Observing the differences between consecutive terms, we have:

-1 - 3 = -4

-7 - (-1) = -6

41 - (-7) = 48

x - 41 = ?

Looking at the differences, we can see that they alternate between -4 and -6. This suggests that the next difference should be -4.

Therefore, we can deduce that:

x - 41 = 48 - 4

Simplifying:

x - 41 = 44

To find x, we can add 41 to both sides of the equation:

x = 44 + 41

x = 85

So the next term in the sequence is 85.

Learn more about sequence here

https://brainly.com/question/30262438

#SPJ11

Therefore, the point-slope form of the line is y = -2x + 8.

To determine the point-slope form of the line using the given point (x₁, y₁) = (2, 4) and slope (m) = -2, we can substitute these values into the point-slope form equation:

y = m(x - x₁) + y₁

Substituting the values:

y = -2(x - 2) + 4

Simplifying:

y = -2x + 4 + 4

y = -2x + 8

To know more about point-slope form,

https://brainly.com/question/30589002

#SPJ11

To determine the percentage of data values that are less than or equal to 45, we would need the actual dataset or information about the distribution of the data.

Without this information, it is not possible to provide an accurate percentage.In order to calculate the percentage, you would need to have a set of data points and then count the number of data values that are less than or equal to 45. Dividing this count by the total number of data points and multiplying by 100 would give you the percentage.For example, if you have a dataset with 1000 data points and you find that 200 of them are less than or equal to 45, then the percentage would be (200 / 1000) * 100 = 20%.Please provide more specific information or the dataset itself if you would like a more accurate calculation.

learn more about percentage here :

https://brainly.com/question/32197511

#SPJ11

The minimum score required for an interview is approximately 74.52 (rounded to 2 decimal places). To find the minimum score required for an interview, we need to determine the score that corresponds to the top 10% of the distribution.

Since the test scores are normally distributed, we can use the Z-table to find the Z-score that corresponds to the top 10% of the distribution.

The Z-score represents the number of standard deviations a particular score is away from the mean. In this case, we want to find the Z-score that corresponds to the cumulative probability of 0.90 (since we are interested in the top 10%).

Using the Z-table, we find that the Z-score corresponding to a cumulative probability of 0.90 is approximately 1.28.

Once we have the Z-score, we can use the formula:

Z = (X - μ) / σ

where X is the test score, μ is the mean, and σ is the standard deviation.

Rearranging the formula, we can solve for X:

X = Z * σ + μ

Substituting the values, we have:

X = 1.28 * 9 + 63

Calculating this expression, we find:

X ≈ 74.52

Therefore, the minimum score required for an interview is approximately 74.52 (rounded to 2 decimal places).

Learn more about cumulative probability here:

https://brainly.com/question/31714928

#SPJ11

Therefore, the equation of the circle with center (-3, 2) and radius 5 is: [tex](x + 3)^2 + (y - 2)^2 = 25.[/tex]

The equation of a circle with center (h, k) and radius r is given by:

[tex](x - h)^2 + (y - k)^2 = r^2[/tex]

In this case, the center of the circle is (-3, 2) and the radius is 5. Substituting these values into the equation, we have:

[tex](x - (-3))^2 + (y - 2)^2 = 5^2[/tex]

Simplifying further:

[tex](x + 3)^2 + (y - 2)^2 = 25[/tex]

To know more about circle,

https://brainly.com/question/1626244

#SPJ11

Algebraic expression are :-

a. B = P - R

b. VC = (S - FC) / x

a. B in P = R × B

  The correct expression is: B = P - R

b. VC in x = FC / (S - VC)

  The correct expression is: VC = (S - FC) / x

Now, let's explain these expressions in more detail:

a. In the equation P = R × B, we are representing the set P as the Cartesian product of sets R and B. Here, B is one of the components of P. To isolate B, we need to rearrange the equation. The correct algebraic expression is B = P - R, which implies that B can be obtained by subtracting R from P.

b. In the equation x = FC / (S - VC), we are trying to find the value of VC. To isolate VC, we need to rearrange the equation. The correct algebraic expression is VC = (S - FC) / x, which shows that VC can be obtained by subtracting FC from S and dividing the result by x.

It's important to note that these expressions may vary depending on the specific context or problem being addressed. It's always advisable to double-check the given equations and apply appropriate algebraic operations to isolate the desired variables.

Learn more about Algebraic expression here :-

https://brainly.com/question/19245500

#SPJ11

We are given a piecewise function as, h(x)={(-3x-12, for x<-4),(2, for -4<=x<2),(x+4, for x>=2):}

We need to find the values of h(-6), h(1), h(2), and h(7) for the given function.

Therefore, let's solve for h(-6):

When x = -6, we get the answer as, h(-6) = (-3 × (-6) - 12) = 6. So, the value of h(-6) is 6.

Thus, we got the answer as h(-6) = 6.

Now, let's solve for h(1):

When x = 1, we get the value of h(x) as, h(1) = 2. So, the value of h(1) is 2.

Thus, we got the answer as h(1) = 2.

Let's solve for h(2):

When x = 2, we get the value of h(x) as, h(2) = (2 + 4) = 6. So, the value of h(2) is 6.

Thus, we got the answer as h(2) = 6.

Now, let's solve for h(7):

When x = 7, we get the value of h(x) as, h(7) = (7 + 4) = 11. So, the value of h(7) is 11.

Thus, we got the answer as h(7) = 11.

Hence, the answers for the given values of h(-6), h(1), h(2), and h(7) are h(-6) = 6, h(1) = 2, h(2) = 6, and h(7) = 11 respectively.

Learn more about piecewise function: https://brainly.com/question/28225662

#SPJ11

Therefore, the magician can now hold his breath for 63 seconds using the new technique.

If the magician can now hold his breath for 40% longer than his initial time of 45 seconds, we can calculate the increased duration as follows:

Increased duration = 45 seconds * 0.40

= 18 seconds

To find out how long the magician can now hold his breath, we add the increased duration to the initial time:

New duration = 45 seconds + 18 seconds

= 63 seconds

To know more about technique,

https://brainly.com/question/28829622

#SPJ11