What is the earliest time at which the oscillator shown below is stationary?

Answer:

[tex]2.4375\ \text{m/s}[/tex]

Explanation:

[tex]m_1[/tex] = Mass of cannon ball = 39 kg

[tex]m_2[/tex] = Mass of performer = 65 kg

[tex]u_1[/tex] = Initial horizontal component of cannon ball's velocity = 6.5 m/s

[tex]u_2[/tex] = Initial horizontal component of performer's velocity = 0

v = Velocity of combined mass

As the momentum of the system is conserved we have

[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\Rightarrow v=\dfrac{m_1u_1+m_2u_2}{m_1+m_2}\\\Rightarrow v=\dfrac{39\times 6.5+0}{39+65}\\\Rightarrow v=2.4375\ \text{m/s}[/tex]

The speed of the performer immediately after catching the cannon ball is [tex]2.4375\ \text{m/s}[/tex].

Answer:

m = [tex]\frac{k}{g}[/tex] x,

graph of x vs m

Explanation:

For this exercise, the simplest way to determine the mass of the cylinder is to take a spring and hang the mass, measure how much the spring has stretched and calculate the mass, using the translational equilibrium equation

              F_e -W = 0

              k x = m g

              m = [tex]\frac{k}{g}[/tex] x

We are assuming that you know the constant k of the spring, if it is not known you must carry out a previous step, calibrate the spring, for this a series of known masses are taken and hung by measuring the elongation (x) from the equilibrium position, with these data a graph of x vs m is made to serve as a spring calibration.

  In the latter case, the elongation measured with the cylinder is found on the graph and the corresponding ordinate is the mass

Answer:

I know theirs South American coast he was there a lot

Answer:

27 ms^-1

Explanation:

by using v= u + at

u = 0 ( because the object id starting from rest)

v= 0 + 1.5 x 18

v = 27 ms^-1

Answer:

The angle of elevation of the rocket is increasing at a rate of 48.780º per second.

Explanation:

Geometrically speaking, the distance between the rocket and the observer ([tex]r[/tex]), measured in kilometers, can be represented by a right triangle:

[tex]r = \sqrt{x^{2}+y^{2}}[/tex] (1)

Where:

[tex]x[/tex] - Horizontal distance between the rocket and the observer, measured in kilometers.

[tex]y[/tex] - Vertical distance between the rocket and the observer, measured in kilometers.

The angle of elevation of the rocket ([tex]\theta[/tex]), measured in sexagesimal degrees, is defined by the following trigonometric relation:

[tex]\tan \theta = \frac{y}{x}[/tex] (2)

If we know that [tex]x = 5\,km[/tex], then the expression is:

[tex]\tan \theta = \frac{y}{5}[/tex]

And the rate of change of this angle is determined by derivatives:

[tex]\sec^{2}\theta \cdot \dot \theta = \frac{1}{5}\cdot \dot y[/tex]

[tex]\frac{\dot \theta}{\cos^{2}\theta} = \frac{\dot y}{5}[/tex]

[tex]\frac{\dot \theta\cdot (25+y^{2})}{25} = \frac{\dot y}{5}[/tex]

[tex]\dot \theta = \frac{5\cdot \dot y}{25+y^{2}}[/tex]

Where:

[tex]\dot \theta[/tex] - Rate of change of the angle of elevation, measured in sexagesimal degrees.

[tex]\dot y[/tex] - Vertical speed of the rocket, measured in kilometers per hour.

If we know that [tex]y = 4\,km[/tex] and [tex]\dot y = 400\,\frac{km}{h}[/tex], then the rate of change of the angle of elevation is:

[tex]\dot \theta = 48.780\,\frac{\circ}{s}[/tex]

The angle of elevation of the rocket is increasing at a rate of 48.780º per second.

Answer:

The ball has a mass of 7/9 kg

Explanation:

Momentum is just mass times velocity, so to find its mass, we can simply divide the given momentum by the given velocity.

[tex]3.5 kg\frac{m}{s} \div 4.5\frac{m}{s} = \frac{7}{9}kg[/tex]

Time = (20 km) x (1 hr/2 km) x (3,600 sec/hr)

Time = (20 x 1 x 3,600 km-hr-sec) / (2 km-hr)

Time = (20 x 1 x 3,600 / 2) (km-hr-sec / km-hr)

Time = 36,000 seconds

(That's 10 hours.)

Answer:

In classical mechanics, impulse (symbolized by J or Imp) is the integral of a force, F, over the time interval, t, for which it acts. Since force is a vector quantity, impulse is also a vector quantity. ... A resultant force causes acceleration and a change in the velocity of the body for as long as it acts.

Answer:

The reckage after collision is motionless (E)

Explanation:

The first law of thermodynamics states that energy is neither created nor destroyed but is converted from one form to another.

The kind of collision described in the question above is known as a perfectly inelastic collision, and in this type of collision, the maximum kinetic energy is lost because the objects moving in opposite directions have a resultant momentum that is equal, but in opposite directions hence they cancel each other out.

The calculation is as follows:

m₁v₁ + m₂v₂

where:

m₁ = m₂ = 1000kg

v₁ = 20 m/s

v₂ = -20 m/s ( in the opposite vector direction)

∴ resultant momentum = (1000 × 20) + (1000 × -20)

= 20000 - 20000 = 0

∴ The reckage after collision is motionless

Answer:

The wreckage after collision is moving at the speed 18 m/s to the south.

Explanation:

Answer:

Density is affected by volume and mass.

Explanation:

Density is defined as the quantity of mass per unit of volume, or expressed mathematically, d = m/v.

Answer:

I think its object 1

Explanation:

Because the object that has more weight has a greater momentum and the lightest object that has a less momentum will be easier to change because its lighter.

Answer:

the Laws of Thermodynamics

Explanation:

these laws states that no form of energy can be created by anyone or anything, without a previous and equal input of energy being put in, that energy can only be transferred from object to object and through different forms

Example: the way a heater runs to warm up an area, that is the process of electrical energy, or energy stored in propane being converted into heat energy

this law is universally implied and has been proven on multiple accounts to be true, in no way can you create energy out of thin air, all you can do is transform and transfer it

hope this is what you was going for, very good point in science

this is one of two correct answers, the other answer to this question is also correct

Answer:

one of the mjor effects of heat transfer is temperature change

Explanation:

simple answer

Answer:

i need help with the same question

Explanation:

Answer:

Chemical.

Explanation:

Weathering can be defined as the physical and chemical breakdown of rock into smaller pieces called sediment. Weathering can be classified into two categories namely;

I. Physical weathering : it is the process of breaking rocks into pieces without affecting its chemical composition e.g temperature, abrasion and frost action.

II. Chemical weathering : it is the process of breaking rocks into pieces by chemical action which leads to changes in its chemical composition e.g carbonation, hydration, plant acid and oxidation.

In this scenario, Lichen grows on the surface of hornblende granite and causes it to breakdown at a faster rate. Thus, this is an example of chemical weathering

Answer:

B = An 8 kg book at a height of 3 m

This question is incomplete, the missing image is uploaded along this answer.

Answer:

the coefficient of friction is 0.32

Explanation:

 Given the data in the question;

we make use of kinematic equation of motion;

ω = ω₀ + ∝t

we substitute

ω = ( 0 rad/s ) + ( 0.4 rad/s² )( 9.903 s )

ω = 3.9612 rad/s

The centripetal force acting on the sample is;

Fc = mrω²

from the image; r = 200 mm = 0.2 m

so we substitute

Fc = m(0.2 m ) ( 3.9612 rad/s )²

Fc = (3.13822 m/s²)m

we know that the frictional force between the two materials should be providing the necessary centripetal force to rotate the sample object;

f = Fc

μN = Fc

μmg = (3.13822 m/s²)m

μ = (3.13822 m/s²)m / mg

μ = (3.13822 m/s²) / g

acceleration due to gravity g = 9.8 m/s²

so

μ = (3.13822 m/s²) / 9.8 m/s²

μ = 0.32

Therefore, the coefficient of friction is 0.32

Answer: Option b.

Explanation:

We know:

Wavelength = 632.8 nm

Fluence = 4.5*10^20 photon/s

The energy of a single photon of wavelength λ is:

E = (h*c)/λ

where:

h = 6.6*10^(-34) J*s

c = 3*10^8 m/s

And we should rewrite the wave length in meters, so:

λ = 632.8 nm = 632.8*10^(-9) m

replacing these in the energy equation, we get:

E = (6.6*10^(-34)J*s)*(3*10^8 m/s)/(632.8*10^(-9) m) = 3.13*10^(-19) J

So each one of the  4.5x10^20 photon that flow each second have this energy, then the power is:

P = (3.13*10^(-19) J)*(4.5*10^20 /s) = 140.85 J/s

and 1 W = 140.85 J/S

Then the power is:

P = 140.85 W

Then the correct answer is the option b, where the units are a little bit different than mine because I used really simplified values for c and h.

magnetic domain is a region within a magnetic material in which the magnetization is in a uniform direction. This means that the individual magnetic moments of the atoms are aligned with one another and they point in the same direction.

Answer:

2.2 ma

Explanation:

Given :

Length of the rope = L

Mass of the rope = m

Mass of the object pulled by the rope = M

M = 1.5 m

So, L [tex]$\rightarrow$[/tex] m

For unit length [tex]$\rightarrow \frac{m}{L}$[/tex]

∴ 0.3 L = [tex]$0.3 \ L \left(\frac{m}{L}\right)$[/tex]

            = 0.3 m

And for remaining 0.7 L =  [tex]$0.7 \ L \left(\frac{m}{L}\right)$[/tex]

            = 0.7 m

By Newtons law of motion,

F - T = ( 0.3 m) a .........(1)

T = ( M + 0.7 m) a

T = ( 1.5 m + 0.7 m) a

T = ( 2.2 m ) a  ..............(2)

So from equation (1) and (2), we have

Tension on the rope

T = 2.2 ma

Answer:

im not sure maybe viberation

Explanation:

Answer:

X-ray waves are transmitted by ....... body tissues with very little absorption

Hope it helps

Please mark me as the brainliest

Thank you

Answer:

[tex]a=0.13m/s^2[/tex]

Explanation:

From the question we are told that

Mass of first team man [tex]m_1=64kg[/tex]

Force of man first team man [tex]F_1=1350[/tex]

Mass of second team man [tex]m_2=69kg[/tex]

Force of man second team man [tex]F_2=1367N[/tex]

Generally the equation for net force F_n is mathematically given by

[tex]F_n=9(m_1+m_2)a[/tex]

[tex]9(m_1+m_2)a=9(f_2-f_1)[/tex]

[tex]9(64+69)a=9(1367-1350)[/tex]

[tex]a=\frac{9(1367-1350)}{9(64+69)}[/tex]

[tex]a=0.127819m/s^2[/tex]

Therefore the acceleration is given by

[tex]a=0.13m/s^2[/tex]

Answer:

 Δt = 5.85 s

Explanation:

For this exercise let's use Faraday's Law

           emf = [tex]- \frac{d \phi}{dt}[/tex] -  d fi / dt

           [tex]\phi[/tex] = B. A

           \phi = B A cos θ

The bold are vectors. It indicates that the area of the body is A = 0.046 m², the magnetic field B = 1.4 T, also iindicate that the normal to the area is parallel to the field, therefore the angle θ = 0 and cos 0 =1.

suppose a linear change of the magnetic field

            emf = - A [tex]\frac{B_f - B_o}{ \Delta t}[/tex]

             Dt = - A  [tex]\frac{B_f - B_o}{emf}[/tex]

the final field before a fault is zero

let's calculate

            Δt = - 0.046 (0- 1.4) / 0.011

            Δt = 5.85 s

Answer:

2500 m

Explanation:

Given that,

Each lap is 500 m

Gareth takes 5 laps.

We need to find distance traveled by Gareth. The distance covered by him is given by :

d = 5×500

d = 2500 m

Hence, he will travel 2500 m.