The density would be 0.5929 g/cm3.
What is density?The density of an object is the ratio of the mass of the object to its volume.
This can be expressed mathematically as: Density = mass/volume
In this case, the dimension of the object is 20.8 cm x 5.3 cm x 4.4 cm. Thus, the volume of the object would be:
20.8 x 5.3 x 4.4 = 485.056 cm3
The mass of the object is given as 287.57 g.
Thus, density of the object = 287.57/485.056 =
In other words, the density of the object would be 0.5929 g/cm3
More on density can be found here: https://brainly.com/question/29775886
#SPJ1
5 F2 (g) + 2 NH3 (g) → N2F4 (g) + 6 HF (g) If you reacted 2.42 moles of F2 how many moles of HF would be produced?
Answer:
The balanced equation is telling us that for every 5 moles of F2 that react, 6 moles of HF are produced.
To find out how many moles of HF would be produced if we have 2.42 moles of F2, we can use the following conversion:
moles of HF = (moles of F2) x (moles of HF/moles of F2)
moles of HF = (2.42 moles) x (6 moles / 5 moles)
moles of HF = 2.92 moles
So 2.92 moles of HF would be produced if you reacted 2.42 moles of F2.
for the problem listed in part b), what is the sodium carbonate concentration when the solution is prepared. g
500 mL of water contain 1.00 moles of sodium carbonate. As opposed to moles per 500 mL, moles per liter is a more practical way to represent concentration.
What is the sodium carbonate?Na2CO3 is the chemical formula for sodium carbonate, a diazonium salt of carbonic acid. Furthermore, it goes by the names soda crystals, soda ash, and washing soda. This inorganic substance may dissolve in water and produces sodium hydroxide and carbonic acid when it does. It has a white powdery appearance and no odor when it is pure.Titration with standard hydrochloric acid using methyl orange as the indicator yields the following equation: Na2CO3 + 2HCl = 2NaCl + H2O + CO2. This yields the Na2CO3 content of the given sample. Na2CO3 has a molecular weight that is half that of its corresponding weight (M). It follows that M/2 g of Na2CO3 is equivalent to 1000 ml of 1 N HCl.Example:
After dissolving the sodium carbonate, the volumetric flask was filled to the 500 mL line.One mole of sodium carbonate per 500 mL is the concentration.Moles per liter are a more practical unit of measurement for concentration than moles per 500 mL.To Learn more About sodium carbonate refer To:
https://brainly.com/question/18458464
#SPJ4
What is the density of the cake in grams/cm3 if it is in a 9.0 X 13 inch pan and in an inch tall and weighs 3.4 pounds?
The density of the cake in grams/cm3 if it is in a 9.0 X 13 inch pan and in an inch tall and weighs 3.4 pounds is 5.189g/cm³.
What is Density?This is a term which is referred to as the mass of a unit volume of a material substance. The formula for density is d = M/V, where d is density, M is mass, and V is volume.
The mass is 3.4 pounds which must be converted to grams. One pound is equal to 453.592 grams therefore 3.4pound = 3.4 pounds × 453.592 = 1542.2g.
9.0 X 13 inch pan and in an inch tall therefore the volume is 117inch³ when converted to cm will be 117inch³ × 2.54 = 297.18cm³ .
Density = mass/volume
= 1542.2g / 297.18cm³ = 5.189g/cm³.
Read more about Density here https://brainly.com/question/26364788
#SPJ1
The compound diborane (B2H6) was at one time considered for use as a rocket fuel. Its combustion reaction is
B₂H6(g) +3O2(Ł)→ 2 HBO2(g) + 2H₂O(Ł)
The fact that HBO2, a reactive compound, was produced rather than the relatively inert B₂O3 was a factor in the discontinuation of
the investigation of the diborane as a fuel. What mass of liquid oxygen (LOX) would be needed to burn 259.9 g of B₂H6,
Answer in units of g.
What mass of HBO2 is produced from the combustion of 103.7 g of B2H6?
Answer in units of g.
a) The mas of the oxygen is 893 g
b) The mass of the oxide is 326 g
What is the stoichiometry of the reaction?
We know that the stoichiometry of the reaction would depend on the balanced reaction equation as we can see in the question that we have here.
Now we know that;
Number of moles of borane = 259.9 g/28 g/mol
=9.3 moles
If 1 mole of borane reacts with 3 moles of oxygen
9.3 moles of borane reacts with x moles of oxygen
x =27.9 moles
Mass of oxygen = 27.9moles * 32 g/mol = 893 g
b)
Number of moles of borane = 103.7 g/28 g/mol
=3.7 moles
If 1 moles of borane produces 2 moles of the oxide
3.7 moles of borane would produce 3.7 * 2/1
= 7.4 moles
Mass of the oxide = 7.4 moles * 44 g/mol
=326 g
Learn more about stoichiometry:https://brainly.com/question/30218216
#SPJ1
How many atoms in 56g of nitrogen gas
56g of nitrogen gas has 4 moles of the nitrogen atom.
How can you figure out how many moles of nitrogen gas there are?N2 has a molar mass of 28.014 g/mol.
n = m/M,
where m = molar mass in g/mol,
n = moles, and
m = mass in grams.
M is a fraction, thus you can divide it by multiplying by the reciprocal of that fraction.
To one significant figure, n = 1 g N2 (1 mol N2/28.014 g N2) = 0.04 mol N2.
How many atoms make up a gaseous nitrogen?Two nitrogen atoms are securely linked together to form the chemical molecule known as molecular nitrogen (N2).
At normal temperatures and pressures, molecular nitrogen is a colorless, odorless, tasteless, and inert gas.
Given is the expression for the number of moles formula.
The formula for moles is.
Mass of material / Mass of one mole equals the number of moles.
95 / 86.94 equals the number of moles.
In response to the query:
56g is the mass of nitrogen gas.
Nitrogen has a molecular weight of 14.
Mass / molecular mass Equals number of moles.
= 56/14.
= 4 moles.
Therefore, 56g of nitrogen gas has 4 moles of the nitrogen atom.
To learn more about number of atoms from given link
https://brainly.com/question/441927
#SPJ1
According to the passage, which of the following compounds can the worker use to catalyze the cleavage of a triglyceride (base-catalysis)?
A) HCl (aq)
B) NaCl (aq)
C) NaOH (aq)
D) Na2SO4 (aq)
Option C: According to the passage, base-catalyzed triglyceride (ester) cleavage occurs. NaCl and Na2SO4 are salted, while HCl is an acid. Only NaOH is a base that can catalyze ester saponification.
In chemistry, an ester is a compound derived from an acid (organic or inorganic) in which at least one acidic hydrogen atom of that acid (H) is replaced by an organyl group (R). A carboxylic acid and alcohol substitution reaction is an example of ester formation. Glycerides are fatty acid esters of glycerol; they are important in biology because they are one of the main classes of lipids and make up the majority of animal fats and vegetable oils. Esters can be formed from oxoacids (for example, acetic acid, orthocarbonic acid, sulfuric acid, perchloric acid, nitric acid, and xanthic acid esters), but also from acids that do not contain oxygen (e.g. esters of thiocyanic acid, hydrogen chloride, trithiocarbonic acid, tricyanomethane).
Learn more about ester here:'
https://brainly.com/question/23127688
#SPJ4
Reaction rate is expressed in terms of changes in the concentration of reactants and products. Write a balanced equation for the following rate expression:
Rate = − (Δ[CH4]/Δt) = − 1/2 (Δ[O2]/Δt) = 1/2 (Δ[H2O]/Δt) = Δ[CO2]/Δt You do not need to include the states of matter in your answer.
The balanced equation for this reaction is:
CH4 + 2O2 -> CO2 + 2H2O
This equation is balanced because each element has the same number of atoms on both sides of the equation. According to the rate expression, the concentrations of O2, H2O, and CO2 are all inversely correlated with the concentration of CH4. This implies that O2, H2O, and CO2 concentrations increase as CH4 concentrations fall. According to the coefficient of 1/2 in front of O2 and H2O, the reaction is happening at a 2:1 ratio, which means that for every CH4 molecule that reacts, 2 molecules of O2 and 2 molecules of H2O are created. The absence of the CO2 coefficient in the rate expression indicates that the concentration of CO2 is directly proportional to the change in concentration of CH4.
To learn more about reactants and products:
https://brainly.com/question/30312202
#SPJ4
select all statements that correctly describe the mechanism of the reduction of acid chlorides and esters with a metal-hydride reducing agent.
The statements that correctly describe the mechanism of the reduction of acid chlorides and esters with a metal-hydride reducing agent.
An aldehyde is produced in Step 2 of the mechanism. In Step 2 the π bond is re-formed. In Step 2 of ester reduction, an alkoxide leaving group is expelled from the tetrahedral intermediate.Definition of ReductionReduction is a reaction in which the oxidation number decreases and electrons gain. It can be said that reduction is a reaction in which a substance loses oxygen.
Definition of OxidationOxidation is a reaction that has an increase in oxidation number and a decrease in electrons. It can be said that oxidation is a reaction in which a substance binds oxygen.
Learn more about reduction at https://brainly.com/question/14283278.
#SPJ4
Consider the reaction below, in which 6 atm of ammonium nitrite is added to an evacuated flask with a catalyst and then heated.
NH4NO2 (g) N2 (g) + 2 H2O)
At equilibrium the total pressure is 14 atm. Calculate the partial pressure of the water vapor at equilibrium
a. 2.0 ATM
b. 4.0 ATM
c. 6.0 ATM
d. 8.0 ATM
e. 10.0 ATM
Option d, The partial pressure of the water vapor at equilibrium is 8 atm.
Ammonium nitrate (NH4NO2) is placed in a 6 atm vacuum flask and heated in this reaction. The total pressure when everything is in equilibrium is 14 atmospheres. Using the information in the problem statement and the ideal gas law, we can determine the partial pressure of water vapor at equilibrium.
We know the reactants (NH4NO2), the products (N2 and H2O), and the total equilibrium pressure, which is 14 atm. Therefore, using the mole fractions of each gas, we can calculate the partial pressure of each gas at equilibrium.
From the balanced chemical equation:
NH4NO2 (g) -> N2 (g) + 2 H2O(g)
The mole ratio of NH4NO2:N2:H2O = 1:1:2
So the mole fraction of N2 = 1/4 and the mole fraction of H2O = 2/4 = 0.5
From the ideal gas law PV = nRT, and knowing the total pressure, we can find the partial pressure of each gas:
Partial pressure of N2 = (mole fraction of N2)(total pressure) = (1/4)(14 atm) = 3.5 atm
Partial pressure of H2O = (mole fraction of H2O)(total pressure) = (0.5)(16 atm) = 8 atm.
To learn more about the chemical reactions at
https://brainly.com/question/29039149?referrer=searchResults
#SPJ4
when disposable gloves provide limited chemical protection, which of the fololowing are additional best practices
Disposable gloves are ones that you use only once and then discard. They can safeguard both the individual you're caring for and your health.
They aid in preventing the transfer of disease and germs to both you and the other person.
When handling bodily fluids such as saliva, blood, urine, or stool from a loved one, use gloves. And when washing a loved one, some individuals wear gloves. Additionally, gloves can be worn when administering immunizations and applying medications to the skin.
Gloves won't stop you from sticking something sharp into your flesh. Body fluids can spread illness, therefore gloves can assist. However, if there are instances when you decide against using gloves or don't have any, keep your hands as sanitized as you can.
Learn more about Gloves:
https://brainly.com/question/29627803
#SPJ4
Answer:
- Changing frequently, especially between tasks
- Hand washing each time you remove your gloves
- Using each pair just once
A student removes a chemical sample from a reagent bottle to be used in an experiment. What should he do with any excess chemical remaining from this sample after the experiment is complete?
Select one:
Check and see if anyone else can use the chemical. If not, discard in the proper waste container.
Conduct a second trial of the experiment with the excess chemical.
Discard the chemical down the sink under running water.
Clean a spatula thoroughly, then use it to add the chemical back into the reagent bottle.
The correct statement from the given option is as follows : Check and see if anyone else can use the chemical. If not, discard in the proper waste container.
A student removes the chemical sample from the reagent bottle to used in an experiment. He should do with any excess chemical that is remaining from that sample after the experiment is complete is he should Check and see if anyone else can use the chemical. If not, discard in the proper waste container.
The remaining chemical can not return to the bottle because , if the student return the this leftover sample, than it can contaminate the entire sample store in the container.
To learn more about chemicals here
https://brainly.com/question/13209421
#SPJ4
An electromagnet can be made by wrapping wire around which object?
By encircling an iron core with wire, an electromagnet can be created. The required magnetic field is increased when the core is constructed of a ferromagnetic material like iron.
An electromagnet is what?By running electricity through the wire that is twisted around an iron core, a transient magnet is created.
Ferromagnetic materials are those that, even in the absence of an external magnetic field, exhibit spontaneous net magnetization at the atomic level.
How do magnetic fields work?The area where the force of magnetism acts around a magnetic material or a moving electric charge is known as the magnetic field, which is a vector.
To know more about electromagnets, visit :
brainly.com/question/14411049
#SPJ1
isoniazid is used in the treatment of tuberculosis and multiple sclerosis. identify each lone pair as either localized
The pairs has been identified as lone or localized, N is a lone pair and NH₂ is localized.
Isoniazid, also known as nydrazid, is a popular antibiotic used to treat and prevent tuberculosis and other illnesses. For specific forms of tremor in multiple sclerosis (MS), isoniazid is administered. Usually, substantial dosages of the antibiotic (600–1200 mg daily) are needed to treat MS tremors. To avoid contracting active TB disease, you can take medication. The medications Isoniazid and Rifapentine (INH-RPT) are combined to treat LTBI. They eliminate the dormant tuberculosis bacteria before you become unwell. The TB bacteria are powerful and can be killed by the medication over several months. Isoniazid is used to treat or prevent tuberculosis (TB) (reactivation). It can be used either on its own or in conjunction with other medications to cure TB or stop it from coming back (reactivation).
To learn more about isoniazid click here
brainly.in/question/18176701
#SPJ4
The hexaaqua complex [Ni(H_2O)_6]^2+ is green, whereas the hexaammonia complex [Ni(NH_3)_6]^2+ is violet. Explain. H_2O has a weaker ligand strength than NH_3; therefore, a complex with H_2O absorbs a shorter wavelength of light than a complex with NH_3. NH_3 has a weaker ligand strength than H_2O; therefore, a complex with NH_3 absorbs a shorter wavelength of light than a complex with H_2O.
This difference in ligand strength causes the two complexes to absorb different wavelengths of light, resulting in different colors.
The difference in ligand strengthThe hexaaqua complex [Ni(H_2O)_6]^2+ absorbs green light and appears green, while the hexaammonia complex [Ni(NH_3)_6]^2+ absorbs violet light and appears violet.The color of a complex is determined by the wavelength of light it is able to absorb. The wavelength of light absorbed is dependent on the ligand strength of the ligands that bind the metal ion in the complex. The ligand strength of a ligand is determined by the number of electrons it can donate to the metal ion. H_2O is a weak ligand and can donate only two electrons to the metal ion, whereas NH_3 can donate four electrons. This makes NH_3 a stronger ligand than H_2O. As a result, a complex with H_2O will absorb a longer wavelength of light than one with NH_3. This means that the hexaaqua complex [Ni(H_2O)_6]2+ will absorb a longer wavelength of light and therefore appear green, while the hexaammonia complex [Ni(NH_3)_6]2+ will absorb a shorter wavelength of light, appearing violet. The ligand strength of a particular ligand is determined by the type of ligand, the number of electrons it can donate, and the strength of the bond it forms with the metal ion. The ligand strength of a ligand can also be affected by the other ligands in the complex, due to the formation of a synergistic effect.To learn more about the ligand field theory refer to:
https://brainly.com/question/11856948
#SPJ1
in the dna isolation process, is used to break down the protein complexes and allow the dna molecules to easily precipitate. MULTIPLE CHOICE A. meat tenderizer B. salt C. none of the answer choices are correct. D. ethanolsodium chloride
In the DNA isolation process, meat tenderizer is used to break down the protein complexes and allow the DNA molecules to easily precipitate.
The purification of DNA from a sample is accomplished by a process known as DNA isolation, which makes use of both physical and chemical techniques. An enzyme known as meat tenderizer is responsible for further dissolving DNA by reducing the strength of protein-DNA interactions. Where the alcohol and strawberry mixture come together, isopropyl alcohol causes the DNA strands that were previously dissolved to become solid. The strands are easier to clump and stick together because to the salt. When combined with the meat, these proteolytic enzymes break down the proteins in the muscle as well as hydrolyze collagen and elastin, which contributes to the tenderization of the meat.
To learn more about DNA isolation, click here:
https://brainly.com/question/18316109
#SPJ4
A gaseous reaction goes to completion in a piston-cylinder at constant pressure. after the reaction, the temperature is found to remain the same but the volume has halved. which of the following balanced reactions is consistent with these results?
a. N2 (g) + 3H2(g) → 2NH3(g)
b. A(g) + B2(g) → AB2(g)
c. 2AB(g) + B2(g) → 2AB2(g)
A gaseous reaction goes to completion in a piston-cylinder at constant pressure. after the reaction, the temperature is found to remain the same but the volume has halved is A(g) + B2(g) → AB2(g). so, option (b) is correct.
What is gaseous reaction ?
A chemical reaction known as a "gas evolution reaction" produces gases like oxygen or carbon dioxide as one of its byproducts. A fume chamber can be used to conduct gas evolution reactions when the byproduct gases are explosive or hazardous to breathe.
What is pressure ?
The pressure is nothing but the vital force applied to the object or particle. Pressure calculates how much force will be gone or extended to the object. Pressure is the force that is perpendicular to the power of extension. The standard unit of pressure is the pascal (pa).The formula for pressure, p= F/ Ap= pressure, F= magnitude, A= area of the surface pressure is the scalar quantity. Pressure is also expressed in the term atmospheric pressure, atm.
Therefore, gaseous reaction goes to completion in a piston-cylinder at constant pressure. after the reaction, the temperature is found to remain the same but the volume has halved is A(g) + B2(g) → AB2(g). so, option (b) is correct.
Learn more about reaction from the given link.
https://brainly.com/question/26505550
#SPJ4
HELPPP ASAP!!!
Compare the Earth’s mantle and core by writing each characteristic in the correct area of the
CORE & MANTLE
Venn diagram.
Semi-solid
Less dense
Made of rock
Composed of two parts
Creates Earth’s magnetic field
More dense
Solid and liquid
Mostly metallic
Thickest layer of Earth
Increased pressure with depth
Increased temperature with depth
Answer: Ok here you go....
Explanation:
Core:
Semi-solid
Composed of two parts
Create Earth's magnetic field
More Dense
Mostly metallic
Both:
Increased pressure with depth
Increased temperature with depth
Mantle:
Less Dense
Made of rock
Thickest layer of Earth
Pretty sure solid and liquid is the core but I'm not certain.
Photochemical smog forms when ________ and ________ are trapped by a thermalinversion and ozone, nitrogen dioxide and PAN form.A) hydrocarbons; leadB) volatile organic compounds; oxides of nitrogenC) carbon monoxide; sulfur dioxideD) carbon dioxide; lead
Photochemical smog forms when (B) volatile organic compounds and oxides of nitrogen are trapped by a thermal inversion and ozone, nitrogen dioxide, and PAN.
When sunlight interacts with nitrogen oxides and volatile organic compounds (VOCs), a mixture of pollutants known as photochemical smog is produced. This results in the formation of a brown haze that hangs over urban areas. Since there is more sunshine in the summer, this phenomenon tends to happen more frequently during that time of year. Primary sources of pollution.
When sunlight interacts with nitrogen oxides and volatile organic compounds (VOCs), a mixture of pollutants known as photochemical smog is produced. This results in the formation of a brown haze that hangs over urban areas.
You can also learn about volatile organic compounds from the following question:
https://brainly.com/question/1163824
#SPJ4
Systemic lupus erythematosus, or lupus, affects a few million people in the United States.
Most of these people are young women. Lupus is a chronic, autoimmune disease that
affects connective tissue in any part of the body. An attack can damage organs and the
nervous system. What conclusion can be drawn about lupus?
A. Most victims of lupus are middle-aged women.
B. Hormones most likely are unrelated to the lupus disease.
C. Lupus is easy for a physician to diagnose.
D. Lupus can affect almost every system of the body.
E. It is uncommon to have skin problems with lupus.
The conclusion that can be drawn about lupus is that: Lupus can affect almost every system of the body. Option D. is the correct answer.
What is Lupus (SLE)?
This refers to a disease that happens when your body's immune system attacks your own tissues and organs (autoimmune disease).
Lupus (SLE) can affect the following body parts: joints, skin, kidneys, blood cells, brain, heart and lungs.
Symptoms differ from person to person but can include fatigue, joint pain, rash and fever. These can get worse from time to time (flare up) and then improve.
Lupus has no cure. Current treatments are based on improving quality of life by controlling symptoms and minimizing flare-ups. This starts with lifestyle modifications, including sun protection and diet. Also, disease management includes medication such as anti-inflammatories and steroids.
Learn more about Lupus on
https://brainly.com/question/28445821
#SPJ1
PLSS HELP ITS THE LAST QUESTION I NEED!!!!!!! ALOT OF POINTS!!!
Which of the following statements is true?
People in an experiment do not have the right to refuse participation.
Scientists must make moral decisions on controversial issues.
Honest mistakes do not need to be corrected because they are not made on purpose.
If you don't know a law exists, it's ok to not follow it.
The true statement on conduct in experiments is B. Scientists must make moral decisions on controversial issues.
How should scientists behave in experiments ?Scientists have an ethical responsibility to conduct experiments in a responsible and unbiased manner, with the goal of advancing scientific knowledge and understanding. In order to fulfill this responsibility, scientists should adhere to a number of principles and guidelines when conducting experiments.
This is why they must make moral decisions when it comes to controversial issues.
Find out more on scientists at https://brainly.com/question/17274244
#SPJ1
London dispersion forces or simply dispersion forces are the______ intermolecular force. It is an attractive force that arises from surrounding_____ dipole moments in_________ molecules or species These_________ dipole moments arise when there are instantaneous deviations in the electron clouds of the________ species. Surrounding molecules are influenced by these______ dipole moments and a chain reaction results in which subsequent weak; dipole-induced dipole interactions are created: These cumulative dipole- induced dipole interactions create the attractive dispersion forces. Dispersion forces are the forces that make_______ substances condense to liquids and freeze into solids as temperatures decrease. Your answer choices are: weakest; temporary and nonpolar: Several of your choices are used more than once_
"London dispersion forces or simply dispersion forces are the weakest intermolecular force. It is an attractive force that arises from surrounding temporary dipole moments in nonpolar molecules or species. These temporary dipole moments arise when there are instantaneous deviations in the electron clouds of the nonpolar species. Surrounding molecules are influenced by these temporary dipole moments and a chain reaction results in which subsequent weak; dipole-induced dipole interactions are created: These cumulative dipole-induced dipole interactions create the attractive dispersion forces. Dispersion forces are the forces that make nonpolar substances condense to liquids and freeze into solids as temperatures decrease".
London dispersion forces, also known as dispersion forces, are the weakest of the intermolecular forces. They are an attractive force that arises between all types of molecules, including nonpolar molecules, as a result of temporary fluctuations in the electron distribution. These fluctuations lead to the creation of temporary dipoles in the molecule, which then interact with neighboring molecules and produce an attractive force. The strength of the London dispersion forces increases as the size of the molecule increases, and as a result, they play a significant role in determining the properties of many materials, such as the boiling and melting points of nonpolar substances.
Learn more about London dispersion forces here: brainly.com/question/1454795
#SPJ4
in principle all chemical reactions are reversible and can reach dynamic if all the reactants and products are present. this state occurs when the of the forward and reverse reactions are equal. true or false
Theoretically, every chemical reaction can be stopped and enter a dynamic state if all the reactants and products are present. The forward and reverse reactions are equivalent in this circumstance.
From the food our bodies digest to the way the sunlight we receive is created, chemical reaction occur all around us. Understanding physical and chemical changes is essential before beginning chemical processes. reversed reaction Reversible reactions occur when the reactants produce products, which then combine to produce the reactants once more. In a reaction where A and B combine to form C and D, or vice versa, C and D combine to form A and B.
Learn more about chemical reaction here
https://brainly.com/question/29039149
#SPJ4
which of the following is an incorrect statement about the number of electrons lost or gained by a representative element during ion formation?
The incorrect statement about the number of electrons that is lost or gained by a representative element during the ion formation is E) no correct response .
The correct statements are given as :
A) The number is usually 3 or less. This statement is true about the number of electrons that is lost or gained by a representative element during the ion formation.
B) The number is governed by the octet rule. This statement is true.
C) The number is related to the position of the element in the periodic table. This statement is true about the number of electrons that is lost or gained by a representative element during the ion formation
This question is incomplete, the complete question is :
Which of the following is an incorrect statement about the number of electrons lost or gained by a representative element during ion formation?
A) The number is usually 3 or less.
B) The number is governed by the octet rule.
C) The number is related to the position of the element in the periodic table.
D) more than one correct response
E) no correct response
To learn more about periodic table here
https://brainly.com/question/16962536
#SPJ4
refer to the figure showing the structure of methyl acetate. which statement explains why this compound can form hydrogen bonds with water but not with itself?
Refer to the figure showing the structure of methyl acetate. why this compound can form hydrogen bonds with water but not with itself because This compound lacks a hydrogen atom in a highly polar bond.
ABOUT METHYL ACETATEMethyl acetate, also known as MeOAc, acetic acid methyl ester or methyl ethanoate, is a carboxylate ester with the formula CH3COOCH3. It is a flammable liquid with a characteristically pleasant smell reminiscent of some glues and nail polish removers. Methyl acetate is occasionally used as a solvent, being weakly polar and lipophilic, but its close relative ethyl acetate is a more common solvent being less toxic and less soluble in water. Methyl acetate has a solubility of 25% in water at room temperature. At elevated temperature its solubility in water is much higher. Methyl acetate is not stable in the presence of strong aqueous bases or aqueous acids. Methyl acetate is not considered a VOC in the USA.
Learn more about methyl acetate at
https://brainly.com/question/28166727.
#SPJ4
when a system is at equilibrium, the reaction enter the correct word or phrase: is equal the equilibrium constant.
When a chemical system is in equilibrium, it signifies that the forward and reverse reactions are occurring at the same pace. This implies that the concentration of reactants and products.
remains constant over time. The equilibrium constant (Kc) is the ratio of the concentration of products to their stoichiometric coefficients at equilibrium to the concentration of reactants to their stoichiometric coefficients. It is a constant measure of the relative intensity of forward and reverse reactions at a particular temperature and pressure. At equilibrium, the forward reaction rate equals the reverse reaction rate, ensuring that the concentration of reactants and products stays constant. when a system is at equilibrium, the reaction enter the correct word or phrase: is equal the equilibrium constant. The system is said to be in this state.The forward and reverse reflexes are continuously balanced in a condition of dynamic equilibrium.
learn more about temperature here:
https://brainly.com/question/11464844
#SPJ4
If an electron emits 3 eV of energy, what is the corresponding wavelength of the emitted photon? (Note: 1 eV = 1.60 x 10-19 J, h = 6.626 x 10-34 J x s)
If an electron emits 3 eV of energy, what is the corresponding wavelength of the emitted photon will be 4.12 × 10 ^-7.
The distance between corresponding points (adjacent crests) in adjoining cycles of such a waveform signal carried in space or along a wire is defined as the wavelength. This length is typically defined in wireless communication systems as meters (m), centimeters (cm), or millimetres (mm) (mm).
E = hc/ wavelength...(i)
It is given that,
E = ev
h = 6.626 x 10-34 J x s
Putting the values of given data in above equation.
Wavelength = hc/E
Wavelength = 6.626 x 10-34 J x s ×3× 10^8 /3 ×1 .60 x 10-19 J,
Wavelength = 19.8 × 10^-26 /4.8 x 10-19 J
Wavelength = 4.12 × 10 ^-7.
Therefore, the wavelength will be 4.12 × 10 ^-7.
To know more about wavelength
https://brainly.com/question/13533093
#SPJ4
107.8682 47
731.0 1.93
Ag
Silver
[Kr] 4d1 5s¹
344
What is the atomic number?
The number assigned to a chemical element according to its atomic number in the periodic system, which places the elements in ascending order of the number of protons in their nuclei.
Why is it called atomic number?The quantity of protons in an atom is known as its atomic number. It is known as the proton number for this reason. It is represented in calculations by the capital letter Z. The word "Z" is derived from the German "zahl," which meaning "number of numerals" or "atomzahl," a more contemporary term that means "atomic number."Henry Moseley demonstrated in 1913 that an element's atomic number rather than atomic mass is its more fundamental characteristic.The quantity of positive charges in the atomic nucleus, according to a study written by Moseley in 1914, is what determines the atomic number. In addition, he claimed that between aluminium and gold, there were three undiscovered elements with the atomic numbers 43, 61, and 75.To learn more about periodic refer to:
https://brainly.com/question/15987580
#SPJ1
A calorimeter was used to determine the molar enthalpy of a solution of AICI3. When a sample of AlCl3 was dissolved in water, the following data were collected. Mass of AICI: Mass of H2O(g) Final Temp. (°C) Initial Temp. (°C) 20.0 10.0 250.0 46.3 Determine the molar heat (kJ/mol) of solution. Answer in 3 Sig fig, include sign.
The molar heat of solution of AICI₃ is 56.8 kJ/mol.
To determine the molar enthalpy of the solution, we can use the equation:
q = mcΔT
where q is the heat absorbed or released by the solution, m is the mass of the solvent (in this case, water), c is the specific heat of the solvent, and ΔT is the change in temperature of the solution.
Calculate the heat absorbed or released by the solution using the equation:
q = mcΔT
q = (10 g) (4.18 J/g·°C) (250 - 46.3)
q = 8526.882 J
Then we can calculate the number of moles of solute using the molar mass of the solute:
n = m / M
n = (20 g) / (133.34 g/mol)
n = 0.15 mol
Finally, use this value of n to calculate the molar enthalpy of solution using the formula:
ΔH = (q / n)
Where n is the number of moles of solute (AlCl₃) and ΔH is the molar enthalpy of solution.
ΔH = (8526.882 J) / (0.15 mol)
ΔH = 56845.88 J/mol
ΔH = (56845.88 J/mol)(1 kJ/1000 J)
ΔH = 56.8 kJ/mol
Hence, the molar heat of solution is 56.8 kJ/mol (3 sig figs).
Learn more about molar enthalpy of solution here: https://brainly.com/question/11628413
#SPJ4
make a claim about the length of time nitrogen spends in its reservoirs compared to the carbon cycle.
When compared to the carbon cycle, the nitrogen cycle has a longer residence time in its reservoirs. Nitrogen gas accounts for 78% of the Earth's atmosphere.
yet it is not commonly available in plant-usable forms. Nitrogen must first be transformed into a useable form, such as ammonia or nitrate, through the nitrogen fixation process. This process can occur naturally, such as by lightning or bacterial activity, or through human activities, such as fertilizer application. Nitrogen, once useful, may be taken up by plants and animals and eventually returned to the atmosphere via denitrification. Because the entire process might take decades to millennia, the nitrogen cycle is substantially slower than the carbon cycle. The polypeptide is a kind of protein. The The peptide bond also permits the polypeptide to be flexible, which is essential for its operation.The initial amino acid in a peptide is known as the N-terminal (NH2) residue, while the last amino acid is known as the C-termina.
learn more about carbon here:
https://brainly.com/question/22530423
#SPJ4
1 . 6.11 mol SF6 to L at STP
2. 16 mol bromine monochloride to L at STP
3. 30.3 g magnesium oxide to mol
4. 17.4 mol Mn2(Cr2O7)3 to g
5. 1.71 mol Cr2(SO4)3
pls help me
The number of molecules in 1.71 moles of magnesium oxide is 0.56.02310 23 =3.011510 23.
What amount of molecules are there?Avogadro's number (6.022140857 1023) states that all substances have exactly the same number of molecules in a mole.
Determine the substance's molecular weight for one mole in order to calculate the necessary number of molecules. Next, divide the molar mass value by the molecular mass, and multiply the result by the Avogadro constant.
17.4 mol Mn2(Cr2O7)3 to g
6.11 mol SF6 to L at STP
=1L -7.466L⟶
Avogadro calculated that a mole of magnesium oxide comprises 6.023 x 6.11 molecules.
The number of molecules in 1.71 moles of magnesium oxide is 0.56.02310 23 =3.011510 23.
The complete question is Calculate the number of molecules6.11 mol SF6 to L at STP
2. 16 mol bromine monochloride to L at STP
3. 30.3 g magnesium oxide to mol
4. 17.4 mol Mn2(Cr2O7)3 to g
5. 1.71 mol Cr2(SO4)3
To learn more about magnesium oxide refer to:
https://brainly.com/question/1379389
#SPJ1