Answer:
M = 3.0 M.
Explanation:
Hello there!
In this case, according to the definition of molarity, it turns out possible for us to calculate the required molar concentration of the given volume of solution and moles of solvent by knowing they are divided as follows:
[tex]M=\frac{n}{V}[/tex]
However, since the volume is in liters, we first convert the 2500 mL to L and then calculate the resulting molarity as shown below:
[tex]V=2500mL*\frac{1L}{1000mL} =2.500L\\\\M=\frac{7.5mol}{2.500L}\\\\M=3.0M[/tex]
Whereas M stands for molar units of mol/L.
Regards!
What is the mole fraction of each component of a gas mixture that contains sulfur trioxide at a pressure of 1.45 atm and sulfur dioxide at a pressure of .32 atm
Answer:
[tex]x_{SO_3}=0.82\\\\x_{SO_2} =0.18\\[/tex]
Explanation:
Hello there!
In this case, according to the given information, it is possible for us to solve this problem by using the Dalton's law which allows us to calculate the mole fractions by dividing the partial pressures over the total pressure. In such a way, we plug in the given pressures of sulfur trioxide (SO3) and sulfur dioxide (SO2) to obtain:
[tex]x_{SO_3}=\frac{1.45atm}{1.45atm+0.32atm} =0.82\\\\x_{SO_2}=\frac{0.32atm}{1.45atm+0.32atm} =0.18\\[/tex]
Best regards!
0.378g grams of a compound is made up of 0.273g of Mg and 0.105g nitrogen. Find its empirical formula.
Answer:
The empirical formula of the compound is [tex]Mg_3N_2[/tex].
Explanation:
Mass of magnesium in compound = 0.273 g
Mass of nitrogen in the compound = 0.105 g
Moles of magnesium =[tex]\frac{0.273 g}{24.305 g/mol}=0.0112 mol[/tex]
Moles of nitrogen = [tex]\frac{0.105 g}{14.0067 g/mol}=0.00750 mol[/tex]
Form empirical formula divides the lowest value of moles of an element present with all the moles of elements present.
Magnesium [tex]=\frac{0.0112 mol}{0.00750 mol}=1.5[/tex]
Nitrogen [tex]=\frac{0.00750mol}{0.00750 mol}=1[/tex]
The empirical formula of a compound:
[tex]Mg_{1.5}N_1=Mg_{\frac{15}{10}}N_1=Mg_{15}N_{10}=Mg_3N_2[/tex]
The empirical formula of the compound is [tex]Mg_3N_2[/tex].
If methane gas was kept in a 3.00 L container at STP, what would the pressure
be at 3.2 L?
Given
P1 = 1 Atm ( at stp)
V1 = 3.00 L
V2 = 3.20 L
P2 = ?
We know that,
at constant temperature
P1V1 = P2V2
1 × 3 = 3.2 × P2
P2 = 3/3.2
P2 = 0.9375 Atm
pressure at 3.2 L is 0.9375 Atm.
The molecular mass of nicotine is 162.1 grams. Nicotine contains 74.0% carbon, 8.7% hydrogen, and 17.3% nitrogen. Determine it's molecular formula.
A). C10H14N2
B). C6H8N4
C). C5H7N
D). C3H6N
I give Brainliest! Please no links
Answer:D). C3H6N
Explanation:applesause
What would make oppositely charged objects attract each other more?
increasing the positive charge of the positively charged object and increasing the negative charge of the negatively
charged object
decreasing the positive charge of the positively charged object and decreasing the negative charge of the negatively
charged object
increasing the distance between the positively charged object and the negatively charged object
maintaining the distance between the positively charged object and the negatively charged object
Answer: increasing the positive charge of the positively charged object and increasing the negative charge of the negatively charged object.
Explanation:
edge
Answer:
Your answer is A.
Explanation:
Which part of the atom is most directly involved in chemical bonding?
Answer:
Electron
Explanation:
Which of the following naming systems would you use to nameHClO2?
Question 6 options:
a)
HYDRO________IC ACID
b)
HYDROGEN _________IDE
c)
________________IC ACID
d)
________________OUS ACID
An empty beaker weighs 20g and when filled with kerosene weighs 60g. If the volume of the kerosene is 15cm3, calculate the density of the kerosene
Answer:
2.7 g/cm³
Explanation:
Step 1: Calculate the mass of kerosene
The mass of the full beaker (mFB) is equal to the sum of the masses of the empty beaker (mEB) and the mass of the kerosene (mK).
mFB = mEB + mK
mK = mFB - mEB
mK = 60 g - 20 g = 40 g
Step 2: Calculate the density of kerosene
Density (ρ) is an intrinsic property of matter. It can be calculated as the quotient between the mass of kerosene and its volume.
ρ = m/V
ρ = 40 g/15 cm³ = 2.7 g/cm³
What change has occurred since the Industrial Revolution that has potentially caused a change in Earth’s average climate?
Answer:
Greenhouse gases in the atmosphere absorb heat radiation. Human activity has increased greenhouse gases in the atmosphere since the Industrial Revolution, leading to more heat retention and an increase in surface temperatures.
Select all that apply.
When the products of a reaction have less energy than the reactants:
The reaction is exothermic.
The reaction is endothermic.
The reactants lost internal energy.
The change in enthalpy is positive.
Answer:
The reaction is endothermic
Explanation:
we know that the reactants had to get energy from its surroundings which means that the reaction is endothermic
i need help on this question
NO LINKS!
Answer:
2 experimental
Explanation:
What’s the empirical formula of a molecule containing 65.5% carbon, 5.5% hydrogen, and 29.0% oxygen?
That big lorry hit the new car.change to passive voice
if 67.8 moles of gas was measured out into a helium balloon how many molecules would be present within the balloon
Answer:
[tex]4.08x10^{25} molecules[/tex]
Explanation:
Hello there!
In this case, since the understanding of the mole-molecules relationships is analyzed via the Avogadro's number:
[tex]1mol=6.022x10^{23}molecules[/tex]
Next, we can solve the following setup by starting with the 67.8 moles of helium and obtaining the required molecules as follows:
[tex]67.8mol*\frac{6.022x10^{23}molecules}{1mol}\\\\=4.08x10^{25} molecules[/tex]
Best regards!
Which of the following characteristics describes an acid? (Aks 4b)
Answer:
B: turns litmus red
Explanation:
Looking at the given options;
An acid tastes sour and not bitter and so option A is not correct.
Acid turns blue litmus paper red and not any litmus paper. Thus option B is correct.
Acid has a PH < 7. Thus option C is not correct.
An acid feels just wet while it is a base that feels slippery to touch. Option D is not correct.
which word means the opposite of boiling melting
what are some non living factors that you need in a habitat?
Answer:
You depend on each other and need the nonliving things in your home, like food, water, air, and furniture. Living things need nonliving things to survive. Without food, water, and air, living things die. Sunlight, shelter, and soil are also important for living things.
Explanation: i dunno if this is right or not ;-; but i tried UnU
Which diagram correctly shows the orbits of the Sun, Earth, and Moon in the geocentric model of the solar system?
Answer:
A.
Explanation:
This is the closest to what Ptolemy drew.
B would have the sun and moon in equal orbits, but the moon changes wouldn't be accounted for
C and D have the sun in the middle, so they are both heliocentric.
The diagram that correctly shows the orbits of the Sun, Earth, and Moon in the geocentric model of the solar system is A and the correct option is option A.
What is Geocentric model of Solar System?In the geocentric model of the solar system, the Earth is considered to be the center of the solar system.
The Moon, the planets, the Sun, and the stars all rotate around the Earth (which stays still), with uniform circular motion. They compose the heavens, which are considered to be ethereal and unchanging.
Therefore, the diagram that correctly shows the orbits of the Sun, Earth, and Moon in the geocentric model of the solar system is A and the correct option is option A.
Learn more about Geocentric Model of Solar System, here:
https://brainly.com/question/28608924
#SPJ3
a. 35
b.65
c.81
d.180
I think it's 80 . 12
pls tell me if correct
A rocket travels in a straight line at a speed of 5,000 m/s. After 60 seconds, it is 10,000 m/s. What is the rocket’s acceleration?
Answer:
83.33 m/s^2
Explanation:
Acceleration is defined as the rate of change of velocity.
So if we know that at the beginning an object has a velocity V1.
And after a time T, the object has a velocity V2, then the average acceleration in that time interval can be calculated as:
A = (V2 - V1)/T
In this case, we know that the initial speed was 5,000 m/s
And after a time of 60 s, the velocity is 10,000 m/s
Then we have:
V1 = 5,000 m/s
T = 60s
V2 = 10,000 m/s
Then the average acceleration is:
A = (10,000 m/s - 5,000 m/s)/60s = 83.33 m/s^2
(Thermodynamics question) When dynamite and oxygen create an explosion, the q value for the system (reactants), would be __
a. positive
b. negative
c. zero
PLEASE ANSWER ASAP!!!!! 50 points! :
You have an aquarium with a volume of 100 liters. The tank is generally used to hold water. This tank, however, is filled with fine sand. You also have measuring spoons, the smallest of which holds a volume of 1 milliliter. How can you use one or more measuring spoons to count the grains of sand in the aquarium? Write your ideas for counting the sand grains using the measuring spoon. Decide if the idea would lead to an exact count or an estimate. Suggest how you could improve your ideas. What assumptions are necessary for your procedure for counting sand grains to be reasonable? Explain your reasoning. How does your method of counting a large volume of sand grains compare to the task of counting atoms in a sample of matter?
Answer:
first, find the density of sand grains by using a small weighing scale. put at least 10 measuring spoons of sand on the scale. calculate the density by its formula d = m/v. this result can count the volume whole sand grains based on its weights
You can count the grains of sand ( estimated value ) by ; determining an estimate of the density and mass of the sand grains in the aquarium.
Since the volume of the tank = volume of the sand therefore the volume of the sand grains in the aquarium will be 100 liters, next is to determine the mass of the sand grains by using a weighing scale to take the mass of at least 20 measuring spoons of sand.
Find the density of the sand grains using the formula for determining, Density = mass / volume . with this result, We can determine an estimate of the number of sand grains with results gotten from the density and mass of the sand grains
To determine the number of atoms in a sample matter we also determine the mass and density of the matter just as with the counting of sand grains in the tank. which we can then use to determine an estimate of the number of atoms contained in the matter.
Hence we can conclude that you can count the grains of sand ( estimated value ) by; determining the density and mass of the sand grains in the aquarium.
Learn more : https://brainly.in/question/32356304
Which is an example of a nonaqueous solution?
gasoline
fog
mayonnaise
fruit juice
Answer: Gasoline
Explanation: Siri said so
The non-aqueous means it does not contain water. Among the given options gasoline is an example of a non-aqueous solution. The correct option is A.
What is a non-aqueous solution?The solution which is obtained by dissolving solute in any liquid other than water is defined as the non-aqueous solution. If solute is dissolved in solvent like benzene, alcohol, ether, carbon disulphide, acetone etc. forms a non aqueous solution.
The major difference between the aqueous and non-aqueous solution is that the solvent of an aqueous solution is water whereas in non-aqueous solutions, the solvent is any substance other than water.
The solvent of non-aqueous solution can be polar or nonpolar and depending on the polarity the solutes dissolve in the solvent. Here gasoline is an example of the non-aqueous solution. The gasoline is a crude oil which does not include water as an ingredient.
Thus the correct option is A.
To know more about non-aqueous solution, visit;
https://brainly.com/question/4992250
#SPJ7
Explain the rise and fall of the kingdom of Aksum
Answer
Rise: The kingdom of D'mt populated the majority of the Northern horn which had developed much agriculture and expansion of trade with other empires like Egypt. After the fall of the D'mt kingdom many small kingdoms took its place and slowly came together as one large kingdom called, Aksum. Aksum rose to power in the first century after the son of a Solomon queen had expanded to the land near the red sea.
Fall: The empire had become isolated from civilizations when it came to trade after battling Arabian armies. Their religion segregated them and caused the downfall of their power over the trading ports on the Red Sea.
For more information, go here: https://storymaps.arcgis.com/stories/9b7b377398724be99a0d94dfa9f55550
Which of these elements would form an ion with a charge of -1?
Group of answer choices
K
C
F
Answer:
k
Explanation:
that is shide rong and shide right
Which of the following is not a natural resource?
A
wind energy
B
wood from trees
С
copper
D
computers
Answer:
computers
Explanation:
The sun has been up for several hours , and it has been shining on these trees . What can the trees do because they are in sunlight?what does this mean for the number of energy storage molecules in trees?
A. Give off air. Giving off carbon allows them to make energy storage molecules
B.give off. Giving off carbon uses up energy storage molecules
C.take in carbon from the air . The carbon s used to make energy storage molecules
D.take in carbon from the air , the carbon is used to break down energy storage molecules.
E. None of Above.
If you start with 30.0 grams of sodium fluoride, how many grams of magnesium fluoride will be produced?
Answer:
22.2 g of MgF₂
Explanation:
We star from the reaction:
NaF → sodium fluoride
Mg → Magnesium
2NaF + Mg → MgF₂ + 2Na
2 moles of sodium fluoride react to 1 mol of Mg in order to produce 1 mol of magnesium fluoride and 2 moles of sodium.
We convert mass of the reactant to moles:
30 g . 1mol / 41.98 g = 0.715 mol
We assume that Mg is in excess
As ratio is 2:1, if we have 0.715 moles of NaF we may produce the half of moles, of MgF₂
0.715 mol /2 = 0.357 moles of MgF₂
We convert moles to mass: 0.357 mol . 62.30g /mol = 22.2 g
How many moles of hydrogen gas (H2) are required to react completely with 0.75 moles of nitrogen
gas (N2)?
Answer:
2.25 moles H2
Explanation:
The equation N2+ 3H2 > 2NH3
1 mol of N2 gives 3 mol of H2
Then
. 75 mole N2 give 3*.75 = 2.25 moles of H2
How many ml are in 3,764liters?
Hint: ‘mili’ means a thousandth (1/1,000)
Round your answer to the nearest whole number
Answer:
Your answer I think would be 3,764,000 .If Im wrong please correct me and comment below.
I got my answer by converting 3,764 liters to millileters using a converter calculator
then I rounded it to the nearest whole number using the rounding calculator from calculator soup. This has worked for me in the past.
Hope this helps, good luck!