Answer:
This question is incomplete
Explanation:
This question is incomplete because there are some parameters that are missing. However, when calculating the average emf and speed/velocity is provided, then
average emf = Brvl
where Br is the vertical component of the earth's magnetic field (in weber per square meter, Wb/m²)
v is velocity (in m/s)
l is the length (in meter) of the wing span
What is the mechanical advantage of a nail puller where you exert a force 45 cm from the pivot and the nail is 1.8 cm on the other side? What minimum force must you exert to apply a force of 1250 N to the nail?
Answer:
Explanation:
Mechanical Advantage is the ratio of the distance of the input load (Li)from the pivot to the output load applied to the pivot(Lo)
MA = Li/Le
Given;
Li = 45cm
Lo = 1.8cm
MA = 45/1.8
MA = 25
Hence the mechanical advantage is 25
Also MA is expressed in terms of the force ratio which is the ratio of the Load to the effort applied.
MA = Load/Effort
Given
Load = 1250N
MA = 25
Effort = ?
Substitute
25 = 1250/Effort
Effort = 1250/25
Effort = 50N
Hence the minimum force exerted on the load is 50N
True or False. A compound is formed when two or more elements are combined to make a
new substance with its own properties.
Anyone?
Answer:
I believe It's true. Since from memory I KNOW a compound is formed when elements are combined chemically.
Answer: correct
Explanation: a compound is 2 or more elements formed to make a completely new thing. For example, water is a compound. Why? Well, water is h20. What is h20? It’s Hydrogen and Oxygen. Oxygen is also a compound. Another example is CO2 (carbon dioxide) it’s made of carbon and oxygen, so it’s a compound! A element is just a pure substance. It’s not made up of other materials. It’s in its purest form.
If a car traveled 50 meters in 2 seconds, what will the velocity be? (Write the answer with a number, on decimal if needed, then a space and the units, for example 5.7 m/s)
Answer:
The answer is 25 m/sExplanation:
The velocity of the car can be found by using the formula
[tex]v = \frac{d}{t} \\ [/tex]
d is the distance
t is the time taken
From the question we have
[tex]v = \frac{50}{2} \\ [/tex]
We have the final answer as
25 m/sHope this helps you
The Amazon rainforest has millions of trees down in South America. Pantanal, the largest wetland, or swamp, on Earth sits directly below the Amazon on a map. Explain this phenomenon using processes from the water cycle.
The subject is science just to let you know.
Answer:The Pantanal is, when the season changes of the river flow, the pantanal shrinks after a few river channels The amazon rainforest has a lot of trees.The vapor rises and condenses it into clouds.Water leaves the forest and comes back, the amazon leaves itself.If the amazon water was not to go by itself everything would be different.
Answer:
Nine, Brazil, Venezuela
Explanation:
The first group of planets that are made of rock and closest to the sun
Answer:
A terrestrial planet, telluric planet, or rocky planet is a planet that is composed primarily of silicate rocks or metals. Within the Solar System, the terrestrial planets are the inner planets closest to the Sun
A solid keeps its shape due to which of the following factors?
Space between particles
Attractive forces between particles
The type of element in the solid
The container it is placed in
Answer:
c
Explanation:
because whatever elements are used like gas uses water evaporation so yeah
Answer:
(A) Space between particles!
Explanation:
Solids can hold their shape because their molecules are tightly packed together!
✞ Bye Have A Nice Day! ✞
carter found the rock shown in the picture below near a river
Answer:
there's no picture
Explanation:
and what would the question be anyways?
Answer:
what is the question
Explanation:
Someone help me please it’s urgent
11. How fast will a pebble be traveling 3 seconds after being dropped? (g = 9.8 m/s2)
A.-9.8 m/s
B.29.4 m/s
C.9.8 m/s2
D.29.4 m/s
1. A person weighs 155 lbs and is walking 3.1 miles per hour. How much kinetic energy does the person have? (Keep in mind, 1 kg is 2.2 lb, and 1 m/s is 2.24 mi/h.)2. What is the kinetic energy of a 5 g bullet travelling 400 m/s?
3. Is it possible to have a negative KE? Why or why not?
Answer:
Explanation:
Kinetic energy is expressed as;
KE =1/2 mv²
M is the mass
v is the velocity of the object
1) Given
Mass = 155lb
Velocity = 3.1mi/hr
Since 1kg = 2.2lb
x = 155lb
x= 155/2.2
x = 70.45kg
Also
1m/s = 2.24mi/hr
y = 3.1mi/hr
y = 3.1/2.24
y = 1.384m/s
KE = 1/2(70.45)(1.384)²
KE = 0.9577×70.45
KE = 67.47Joules
2) M = 5g =0.005kg
V = 400m/s
KE = 1/2(0.005)400²
KE = 80000×0.005
KE = 400Joules
3} Since a body decelerates (negative acceleration) this mean that the velocity of a body can be a negative value showing that it is possible for a moving body to possess negative kinetic energy.
Which statement correctly describes the diferences between positive and negative acceleration
O Positive acceleration describes a change in speed, negative acceleration desxibes no change in speed,
Positive acceleration describes no change in speed, negative acceleration desibes a change in speed,
Positive acceleration describes an increase in speed, negative sexeleration desnibes a decrease in speed
O Positive acceleration describes a decrease in speed, negative sideration describes an increase in sarees
Answer:The answer is this Positive acceleration describes an increase in speed, negative sexeleration desnibes a decrease in speed
Explanation:
A 16-V battery powers a series circuit that contains two lightbulbs The
voltage across the first lightbulb is 12-V
Complete question:
A 16-V battery powers a series circuit that contains two lightbulbs. The voltage across the first lightbulb is 12-V.
a. What fractional part of the circuit's total energy is transformed in the first lightbulb? Simply your answer.
b. What fractional part of the circuit's total energy is transformed in the second lightbulb? Simply your answer.
Answer:
(a) Fraction of energy of the first bulb in the total energy of circuit is 3/4
(b) Fraction of energy of the second bulb in the total energy of circuit is 1/4
Explanation:
Given;
total voltage across the series circuit, [tex]V_T[/tex] = 16 V
voltage across the first light bulb, V₁ = 12 V
The voltage across the second light bulb is given by;
V₂ = [tex]V_T[/tex] - V₁
V₂ = 16 V - 12 V
V₂ = 4 V
The total power across the circuit is given by;
P = I[tex]V_T[/tex]
P = 16I
Where;
I is the constant current in the circuit
(a)
power in the first light bulb is given by;
P₁ = 12I
Fraction of this power in the total energy of circuit is given by;
[tex]\frac{P_1}{P} = \frac{12I}{16I} = \frac{3}{4}[/tex]
(b)
power in the second light bulb is given by;
P₂ = 4I
Fraction of this power in the total energy of circuit is given by;
[tex]\frac{P_2}{P} = \frac{4I}{16I} = \frac{1}{4}[/tex]
A child sits on a merry-go-round, 1.5 meters from the center. The merry-go-round is turning at a constant rate, and the child is observed to have a radial acceleration of 2.3 m/s2. How long does it take for the merry-go-round to make one revolution
Answer:
5 .07 s .
Explanation:
The child will move on a circle of radius r
r = 1.5 m
Let the velocity of rotation = v
radial acceleration = v² / r
v² / r = 2.3
v² = 2.3 r = 2.3 x 1.5
= 3.45
v = 1.857 m /s
Time of revolution = 2π r / v
= 2 x 3.14 x 1.5 / 1.857
= 5 .07 s .
The merry-go round will take 5.07 s to complete one complete revolution.
Given data:
The distance of child from the center is, r = 1.5 m.
The magnitude of radial acceleration is, [tex]a = 2.3 \;\rm m/s^{2}[/tex].
Since, the child is on merry-go round, which is undergoing a rotational motion. And radial acceleration means that it is under the acceleration, whose value is given as,
[tex]a=\dfrac{v^{2}}{r}\\\\v=\sqrt{a \times r}[/tex]
Here, v is the linear velocity.
Solving as,
[tex]v=\sqrt{2.3 \times 1.5} \\\\v=1.857 \;\rm m/s[/tex]
Now, we to obtain the time taken by merry-go round to complete one revolution. Then the expression for the time taken to complete one revolution is,
[tex]T=\dfrac{2 \pi r}{v}\\\\T=\dfrac{2 \pi \times 1.5}{1.857}\\\\T = 5.07 \;\rm s[/tex]
Thus, we can conclude that the merry-go round will take 5.07 s to complete one revolution.
Learn more about the centripetal acceleration here:
https://brainly.com/question/14465119
A carbon ion with 10 electrons and 6 protons would have a charge of ?
Answer:
-4
Explanation:
Electrons are negative while protons are positive.
To find the charge, add the number of protons to the number of electrons.
6+(-10)
6-10
-4 is the charge
What holds the metal ions together in a lattice?
A. covalent bonds
B. metallic bonds
C. hydrogen bonds
D. ionic bonds
Answer:
B. Metallic bonds.
A current of 15 Amps flows through a circuit with a resistance of 0.10 Ohms. What is the voltage?
A. 0.006 Volts
OB. 1.5 Volts
O C. 15 Volts
D. 150 Volts
Voltage = (current) x (resistance) (Ohm's law)
Voltage = (15 A) x (0.10 ohm)
Voltage = 1.5 volts (B)
The engine of a boat (m = 2280 kg) exerts an
1800 N force northward, while the current
pushes it 1050 N eastward.
What is the magnitude of the acceleration
of the boat?
Answer:
a = 0.9139 [m/s²]
Explanation:
To solve this problem we must use Newton's second law, which tells us that the sum of forces on a body is equal to the product of mass by acceleration.
The forces are on two different axes, x & y axes (North and East). In this way, the Pythagorean theorem should be used to determine the total force.
Fx = 1800 [N]
Fy = 1050 [N]
[tex]F = \sqrt{(F_{x} )^{2} +(F_{y} )^{2} } \\F=\sqrt{(1800)^{2} +(1050)^{2} } \\F=2083[N][/tex]
Now using Newton's second law.
ΣF = m*a
where:
F = force = 2083.8 [N] (units of Newtons)
m = mass = 2280 [Kg]
a = acceleration [m/s²]
2083.8 = 2280*a
a = 0.9139 [m/s²]
A student builds an electromagnet using a battery, an iron nail, and some insulated wire. The wire is wrapped around the nail 50 times, then connected to the
battery. What changes could the student make to increase the strength of the electromagnet?
1. wrap more wire around the nail
2. increase the voltage of the battery
3. use a switch to turn the electromagnetic on and off
4. increase the size of the nail
A. 1 and 2
B. 2 and 4
C. 1,2 and 4
D. 1,2,and 3
Answer:
a
Explanation:
its right
To increase the electromagnet's strength, the student must enlarge the nail, wrap more wire around the nail, and increase the voltage of the battery. Option c is the correct answer.
How does an electromagnet work?The mechanics of an electromagnet are not overly complicated. It is accomplished by wrapping a length of conductive wire, usually copper, around a metal object.Until electricity is introduced, this appears to be nothing more than a jumbled collection of parts, similar to Frankenstein's monster. An electromagnet, on the other hand, does not require a storm to be activated. A current is introduced and flows through the wire, which can come from a battery or another source of power.As a result of the magnetic field created around the coiled wire, the metal is magnetized as if it were a permanent magnet. Electromagnets are useful because they can be activated and deactivated by closing and opening a circuit.To learn more about electromagnet, refer to
brainly.com/question/7382276
#SPJ2
When a balloon is rubbed on a surface and then touched to hair it will attract the hair, causing it to stick to the balloon. Explain why this happens.
Answer:
electricity
Explanation:
Answer:
This is called static electricity
Explanation:
The reasoning behind this is because the negative electrons in your hair are being transferred to the balloon, then when the balloon is removed it pulls on the hair with an attractive electric force.
A 300 g object attached to a horizontal spring moves in simple harmonic motion with a period of 0.340 s. The total mechanical energy of the spring–object system is 3.00 J.
(a) What is the spring constant (in N/m)?
(b) What is the amplitude (in m) of the motion?
(c) What is the percentage change in amplitude of motion if the total energy of the system is increased to 5.00 J?
Answer:
Explanation:
angular velocity ω = 2π / T where T is time period of rotation .
= 2 x 3.14 / .34 = 18.47 rad /s
Total mechanical energy = 1/2 m ω²Α² where A is amplitude .
spring constant = k
[tex]\omega=\sqrt{\frac{k}{m} }[/tex]
m is mass
[tex]\omega^2=\frac{k}{m} }[/tex]
18.47² = k / .3
k = 102.34 N /m
b )
energy = 1/2 m ω²Α²
3 = .5 x 18.47² x A²
A² = .01759
A = .1326
13.26 cm .
c )
If energy becomes 5 J
5 = .5 x 18.47² x A²
A² = .0293
A = .1711
= 17.11 cm
percent increase
= (17.11 - 13.26 )x100 / 13.26
= 29%
a bowling ball hits two standing bowling pins at the same time. which of the following is true. assume that all collisions are elastic
Answer:
b?
Explanation:
QUESTION 13
Marci would describe almost a perfect person whenever her friends would ask her who she thought was
her ideal life partner. This "perfect" person would be ain)
O a prototype
b.reinforcer
oc. anagram
d. heuristic
if an object is moving with a velocity of 25m/s, an acceleration of 5m/s and has a travel time of 5s, what is the final velocity of the object?
V = at + V0
where v0 is the initial speed, a is the acceleration and t is the time.
So:
v = 5m/s^2*5s + 25m/s = 50 m/s
When water changes from a gas in the atmosphere to a liquid droplet in a cloud, this is known as
Group of answer choices
transpiration
condensation
evaporation
precipitation
Answer:
Condensation
Explanation:
Answer:When water changes from a gas in the atmosphere to a liquid droplet in a cloud, this is known as
Group of answer choices
transpiration
condensation
evaporation
precipitation,←, that one is right
Explanation: so ur answer is precipitation
When living things use chemical reactions to break down food, some of the energy is transformed into
OA. sound.
OB. heat.
OC. light
OD.waste
waste.
Answer:
OB. Heat
Explanation:
I hope this helped :)
A pendulum is transported from sea-level, where the acceleration due to gravity g is 9.80 m/s2, to the bottom of Death Valley. At this location, the period of the pendulum is decreased by 3.00%. What is the value of g in Death Valley
Answer: the value of g in Death Valley is 10.417 m/s²
Explanation:
Given that;
acceleration due to gravity at the point is g = 9.8 m/s²
Lets say the acceleration due to gravity at the bottom of Death valley is g'
as the period of the pendulum is decreased by 3.00%
T' = 0.97 T
T is the period of the pendulum at sea level and T' is the period of the pendulum at bottom of Death valley
therefore from the relation
T = 2π√(l/g)
g'/g = T²/T'²
g' = (T²/ (0.97T)²)g
g' = 1.063g
g' = 10.417 m/s²
therefore the value of g in Death Valley is 10.417 m/s²
Which of these is a base?
HNO3
vinegar
ammonia
HCl
The correct answer is Ammonia
Explain the procedures used and data recorded to identify a crystalline mineral based on its properties.
Answer:
By examining its external shape, color, hardness, etc.
Explanation:
How long will it take a 2190 W motor to lift a 1.47 x 104 g box, 6.34 x 104 mm vertically.
Answer:
4.2s
Explanation:
Given parameters:
Power = 2190W
Mass of box = 1.47 x 10⁴g
distance = 6.34 x 10⁴mm
Unknown:
Time = ?
Solution:
Power is the rate at which work is done;
Mathematically;
Power = [tex]\frac{work done}{time}[/tex]
Time = [tex]\frac{work done}{power}[/tex]
Work done = weight x height
convert mass to kg;
100g = 1kg;
1.47 x 10⁴g = 14.7kg
convert the height to m;
1000mm = 1m
6.34 x 10⁴mm gives 63.4m
Work done = 14.7 x 9.8 x 63.4 = 9133.4J
Time taken = [tex]\frac{9133.4}{2190}[/tex] = 4.2s
Is a compound considered a pure substance?
Answer:
It depends on which compound you use carbon dioxide can be while helium will not but if you where to sum it up it would be use because simply most compounds are considered pure substance.
Explanation: