Answer:
action is backward and i guess reaction is sad
What type of cells provide humoral immunity ?
Answer:
Antibody molecules that are secreted by plasma cells mediate the humoral immune response. The antigen that binds to the receptor of the B-cell antigen signals B cells and is internalized and transformed into peptides that activate the armed helper at the same time.
Explanation:
Answer:
B cells
Explanation:
Humoral immunity or humoural immunity is the aspect of immunity that is mediated by macromolecules found in extracellular fluids such as secreted antibodies, complement proteins, and certain antimicrobial peptides. Humoral immunity is named so because it involves substances found in the humors, or body fluids. It contrasts with cell-mediated immunity. Humoral immunity is also referred to as antibody-mediated immunity.
An unknown element has been studied in the lab. It has been shown to be malleable, ductile, and a good conductor of heat. Which element best fits this description?
Cell with structures labeled A, B, and C
Cell with structures labeled A, B, and C
What structure represents a chloroplast in the cell?
when talking about Acceleration ,what is significant about the about the sign(+ or -)?
Answer:
Acceleration at its most basic is the act of increasing your running speed. From a standing start (or blocks), you explode into action. If you’re already running, you pick up the pace. Acceleration continues until you can no longer increase your speed, at which point you achieve maximum velocity (top-end speed). Acceleration seems simple enough. The plus means your increasing speed, the k=minus means your decreasing in speed.
Explanation:
help me!
Bill left a hammer out in the rain all day. The next morning it had rust on it.
Oxygen and a metal chemically combine to form rust. What is rust an example of?
O a mixture
• a solution
an element
a compound
Answer:D.Compound
Explanation: internet
Which situations will NOT increase the reactions rate of most chemical reactions?
A) an increase in temperature
B) grind up the solute to increase surface area before mixing
C) by increasing the pressure in which the reaction takes place
D) decreasing the concentrations of the substances in the reaction
Answer:
D
Explanation:
Increasing temperature or pressure some times make the condition favorable to the reaction. Similarly increasing surface area of reacting mixture also helps to increase the reaction rate.
What is reaction rate ?The rate of a reaction is the rate of decrease in concentration of reactant or the rate of increase in concentration of the products. The rate of a reaction depends on several factors such as temperature, pressure, surface area etc.
Fir an endothermic reaction, as the temperature increases, reaction rate increases. Similarly, as the pressure increases, the reaction in which the number of moles of gaseous reactants is higher than that in products, rate increases.
The concentration of reactants must be sufficient for the reaction and decreasing the concentration of reactants does not favor an increase in reaction rate. Hence, option D is correct.
Find more on reaction rate :
https://brainly.com/question/8592296
#SPJ2
1. If a rock is dropped from a 600 meter cliff, how long will it take to hit the ground?
Dl
Answer:
11.1s
Explanation:
Given parameters:
Height of cliff = 600m
Unknown:
How long it takes to hit the ground = ?
Solution:
To solve this problem, we use one of the kinematics equation;
H = ut + [tex]\frac{1}{2}[/tex]gt²
H is the height
u is the initial velocity = 0m/s
t is the time taken
g is the acceleration due to gravity
600 = [tex]\frac{1}{2}[/tex] x 9.8 x t²
600 = 4.9t²
t² = 122.5
t = 11.1s
If it is 9 am in San Francisco, is it also 9 am in New York? Why or why not?
If it is 9 am in San Francisco, then there will be 12pm in New York. it happens because of spin rotation of our earth.
What is Clock ?A clock or a timepiece is a device used to measure time. The clock is one of the oldest human inventions. It has three hands moves in the circle. one is second hand, which show seconds. Second hand shows hours and third hand which is smaller than other shows hours.
San Francisco, California is 3 hours behind New York. There will be 12pm in New York when it is 9 am in San Francisco. Day and night happens because of our earth is spinning about itself. when we take a football in the dark room and illuminated it by the torch, then one side of the ball gets illuminated and other side of the ball gets dark due to shadow of its own, Same happens with our earth. it this case torch is our sun and earth is our football. The people who are on the darker side they are in the night and who are in the light side they are in the morning.
Morning starts where edge of the light is. Tme changes with lateral distance on the earth. The points which is on same longitude have same time. There is lateral displacement from San Francisco to New York. Therefore there is time lag between them.
Hence there is time lag.
To know more about time, click :
https://brainly.com/question/15356513
#SPJ2
There are several ways to model a compound. One type of model is shown.
What is the chemical formula for the molecule represented by the model?
CHO
C4H9O2
C4H8O
C3H8O2
Answer:
What is the chemical formula for the molecule represented by the model?
[tex] →CHO\\ →C_4H_9O_2✓ \\→C_4H_8O \\ →C_3H_8O_2[/tex]
2) C4H9O2 is the right answer.In Florida, most of the rocks that are underground are a type of soft, white rock called limestone. If limestone is underwater for a long period of time, it begins to dissolve. Which of these processes most likely causes this change?
A. chemical weathering
B. erosion
C. deposition
D. physical weathering
In Florida, most of the rocks that are underground are a type of soft, white rock called limestone. Long-term submergence in water causes limestone to disintegrate. These processes most likely causes this change is called Physical weathering. Hence, Option D is the correct answer.
What is Physical weathering?Physical weathering is also known as mechanical weathering. It is the weakening of rocks followed by the disintegration due to the physical or mechanical forces including the actions on the rocks by the abrasion, frost chattering, temperature fluctuations and the salt crystal growth. Eventually, after many cooling and heating events, the rocks cracks and break into smaller pieces.
This same mechanical process applies when water freezes and thaws in the cracks of a rock. The chemical composition of the rock, however, remains the same in the process. In Florida, most of the rocks that are underground are a type of soft, white rock called limestone. Long-term submergence in water causes limestone to disintegrate.
These processes most likely causes this change is called Physical weathering. Hence, Option D is the correct answer.
To know more about limestone,
brainly.com/question/15148363
#SPJ2
A 20 kg bike accelerates at 10 m/s2. What was the force? a.200 Newtons b.20 Newtons c.25 Newtons
Answer:
a.200 Newtons
Explanation:
Given the following data;
Mass = 20kg
Acceleration = 10m/s²
To find the force;
Force is given by the multiplication of mass and acceleration.
Mathematically, Force is;
[tex] F = ma[/tex]
Where;
F represents force.
m represents the mass of an object.
a represents acceleration.
Substituting into the equation, we have
[tex] Force = 20 * 10 [/tex]
Force = 200 Newton.
What direction does energy transfer to the direction of a light wave
Answer:
light is a transverse wave. The direction of energy transfer is perpendicular to the motion of the wave
Explanation:
Light is an example of a wave that transfers energy through empty space. How are all mechanical waves similar? The waves caused by an earthquake are good examples of energy transfer. The disturbed ground shakes from side to side and up and down as the waves move through it,
A closed cylindrical tank of radius 3.5 m and height 2m is made from
a sheet of metal. How much sheet of metal is required ?
Explanation:
Total surface area of cylinder:
[tex]2\pi \times r(h + r) \\ 2 \times \pi \times 3.5(3.5 + 2) \\ 2\pi \times 19.25 = 120.951317 \\ 120.95 \: {cm}^{2} [/tex]
sheet of metal required = 120.95 cm^2
Explanation:
Answer:
Given :-
A closed cylindrical tank of radius 3.5 m and height 2 m is made from a sheet of metal.
To Find :-
How much sheet of metal is required.
Formula Used :-
[tex]{\red{\boxed{\large{\bold{T.S.A\: of\: cylinder\: =\: 2{\pi}r(r + h)}}}}}[/tex]
where,
r = Radius
h = Height
Solution :-
Given :
Radius = 3.5 m
Height = 2 m
According to the question by using the formula we get,
⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5(3.5 + 2)[/tex]
⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5(5.5)[/tex]
⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5 \times 5.5T.S.A=2×722×3.5×5.5
⇒ \sf T.S.A =\: 2 \times \dfrac{22}{7} \times 19.25[/tex]
⇒ [tex]\sf T.S.A =\: 2 \times 60.5[/tex]
➠ [tex]\sf\bold{\purple{T.S.A =\: 121\: {m}^{2}}}[/tex]
∴ 121 m² of sheet of metal is required.
According to O*NET, what are common work styles needed by Chefs and Head Cooks? Select four options.
dependability
fitness
stress tolerance
leadership
common sense
attention to detail
The answer is 1, 3, 4, and 6; I just did the question on Edg and I thought that it would need to be posted on here to help others
Answer:
1-3-4-6
Explanation:
not taking the mans answer but just posting it here for people to see it clearly if brushed over on his.
Explain the Difference between genetic diversity and ecosystem diversity?
Answer:
1. Genetic diversity are the differences in DNA among individuals within a species or population while ecosystem diversity is the number or variety of ecosystems within a particular area.
2. Genetic diversity is the genetic material of microorganisms, plants and animals contains information that determines the characteristics of all species and individuals that make up the diversity of the living world while the ecosystem diversity is the enormous range of terrestrial and aquatic environments on earth has been classified into a number of ecosystems.
Which option best describes electromagnetic waves that have enough energy to change atoms or molecules into ions?
A. Waves with low frequency
B. Ionizing radiation
C. Waves with long wavelength
D. Non-ionizing radiation
Answer:
B.Ionizing radiation is the correct answer.
Explanation:
Ionizing radiation has sufficient energy that it can convert atoms and molecules into ions.
It has a sufficient amount of energy that it can separate tightly confined electrons from the orbit of an atom and causing that atom to become ionized.
Answer: lonizing radiation
Explanation:
Got it right
0.0135 kg of steam at 100°C is
cooled, which turns it into water at
50.0°C. How much heat has been
removed? (Remember, it has to
change phase before cooling
down.)
Boil Pt (°C)
Material Melt Pt (°C) 4 0/kg)
Water
0
3.33.105
L(/kg) c (J/(kg*C))
2.26.106 4186
100
(Unit = J)
Answer:
33333.35 kg
Explanation:
I got it right on Acellus, rounded to 33300 sigfigs
When 0.0135 kg of steam at 100°C is cooled, turns it into water at 50.0°C. Then 33,342.45 J of heat has been removed.
What is latent heat?Latent heat is the heat absorbed or released by a substance during a change in its physical state without a corresponding change in temperature. This means that the heat energy is being used to break or form intermolecular bonds between the particles in the substance, rather than raising or lowering the temperature. Examples of processes that involve latent heat include melting, freezing, vaporization, and condensation. The amount of heat required or released during these phase transitions is dependent on the substance and the amount of material undergoing the change.
Here in the question,
To solve this problem, we need to use the formula for the heat required to change the phase of a substance, which is given by:
Q = m * L
where Q is the heat required, m is the mass of the substance, and L is the specific latent heat of the substance.
In this case, we need to find the heat required to change 0.0135 kg of steam at 100°C to water at 100°C, and then cool it down to 50°C.
First, we need to find the heat required to change the phase of the steam to water at 100°C. Using the table given, we can see that the specific latent heat of vaporization for water is 2.26 × 10^6 J/kg. So the heat required to change 0.0135 kg of steam to water at 100°C is:
Q1 = m * L = 0.0135 kg * 2.26 × 10^6 J/kg = 30,510 J
Next, we need to find the heat required to cool the water from 100°C to 50°C. Using the specific heat capacity of water, which is 4186 J/(kg°C), we can calculate the heat required as:
Q2 = m * c * ΔT = 0.0135 kg * 4186 J/(kg°C) * (100°C - 50°C) = 2832.45 J
The total heat removed is the sum of the heat required to change the phase of the steam and the heat required to cool the water:
Q = Q1 + Q2 = 30,510 J + 2832.45 J = 33,342.45 J =33.34245 kJ.
Therefore, 33,342.45 J of heat has been removed.
To learn about specific heat click:
https://brainly.com/question/11297584
#SPJ2
A roller coaster, traveling with an initial speed of 23 m/s, decelerates
uniformly at -4 m/s2 to a full stop. How far does the roller coaster travel
during its deceleration?
I NEED STEP BY STEP EXPLANATION
Answer:
5 and 3/4 meters
Explanation:
This is because if it is slowing down by 4 meters and it was moving at 23, then you would figure out how many times 4 can go into 23 and you'd get 5 and 3/4 meters.
A 2.00 kg ball is thrown upward at some unknown angle from the top of a 20.0 m high building. If the initial magnitude of the velocity of the ball is 20.0 m/s. What is the magnitude of the
FINAL VELOCITY when it strikes the ground? (Note: Ignore air resistance.)
Answer: 28.1
Explanation:
The total energy of the ball is the sum of its kinetic and potential energy. It is equal to 792 J. Then, the final velocity of ball when its strikes the ground is 28.1 m/s.
What is kinetic energy?Kinetic energy of an object is the energy gained by its motion whereas, potential energy is stored on the object when the object is at rest.
The total mechanical energy of the ball = Ke + Pe
given, mass of the ball = 2 Kg
height h= 20 m
initial velocity = 20 m/s
Then total energy = 1/2 mv² + mgh = 2 kg [(1/2(20 m/s)² + 9.8 m/s² ×20 m ] = 792 J.
The final velocity Vf = √(2E/m) =√(2×792 J/m)/2 Kg = 28.1 m/s
Therefore, the final velocity of the ball will be 28.1 m/s.
Find more on kinetic energy:
https://brainly.com/question/11749818
#SPJ5
8.92 x 10 ^ 6 (convert from scientific notation to a standard aka regular number)
what type of triangle measures 8 inches,8 inches,3 inches
Answer:
isoceles
Explanation:
Because two sides are equal
Answer:
An Isosceles triangle
Explanation:
An Isosceles triangle is a triangle where AT LEAST two sides are congruent.
PLEASE HELP I WILL GIVE BRAINLYEST!!
Look at the world map shown below.
The picture shows the world map with a horizontal line labeled 'Equator' running across the middle of the map. A dotted line is shown slightly above the equator and parallel to it. This line is labeled 'Tropic of Cancer'. A dotted line is shown slightly below the equator and parallel to it. This line is labeled 'Tropic of Capricorn'. Florida is labeled on the left just above the Tropic of Cancer and Russia is labeled on the right closer to the north pole.
Public Domain
Which statement accurately describes the distribution of sunlight for the regions labeled? (3 points)
Group of answer choices
Florida has shorter seasons because it is more towards the west of the globe.
Russia has a greater number of longitudinal lines, which causes greater temperature differences.
Florida is situated closer to the Tropic of Cancer, which receives more constant and direct rays of the sun.
Russia is situated closer to the North Pole, which is tilted more towards the sun.
Answer:
Florida is situated closer to the Tropic of Cancer, which receives more constant and direct rays of the sun.
Explanation:
Took the test got it right C
Is this right? Please help me
Answer:
It would be C
Explanation:
The brain operates on two levels, one of them is unconscious.
A chunk of beef has a mass of 11.6 grams and a volume of 58 cm3. What is the density of the chucky beef?
Group of answer choices
46.4
0
672.8
0.2
5
Answer:
0.2g/cm³
Explanation:
Given parameters:
Mass of the beef = 11.6g
Volume = 58cm³
Unknown:
Density = ?
Solution:
Density is the mass per unit volume of a substance.
Density = [tex]\frac{mass}{volume}[/tex]
So;
Density = [tex]\frac{11.6}{58}[/tex] = 0.2g/cm³
The bottom of a ladder must be placed 4 feet from a wall. The ladder is 12 feet long. How far above the ground does the ladder touch the wall? Estimate your answer to the nearest tenth.
Answer:
Height of wall (Perpendicular) = 11.31 ft (Approx)
Explanation:
Given:
Base Distance (Base) = 4 feet
Height of ladder (Hypotenuse) = 12 feet
Find:
Height of wall (Perpendicular)
Computation:
Perpendicular = √Hypotenuse² - Base²
Height of wall (Perpendicular) = √12² - 4²
Height of wall (Perpendicular) = √144 - 16
Height of wall (Perpendicular) = √128
Height of wall (Perpendicular) = 11.31 ft (Approx)
What was the name of the first oil well in the UAE?
A.Murban
B.ADNOC
C.Murhabba
D.OLPEC
Answer:
B.ADNOCExplanation:
the Abu Dhabi Petroleum Company
The first commercially viable oil discovery was made at Bab in 1960. In 1962, the company was renamed the Abu Dhabi Petroleum Company. Exports began to flow from the Jebel Dhanna terminal on December 14, 1963.
Answer:
hiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
A new Chevy truck comes out on the market. In an advertisement it says that it has a faster engine that Ford’s new truck. If this this statement is true, then it means that both engines do the same amount of ______________________ but different amount of _____________________.
work, power
power, work
not enough information is given
what is economic development
Answer:
Economic Development is the creation of wealth from which community benefits are realized. It is more than a jobs program, it's an investment in growing your economy and enhancing the prosperity and quality of life for all residents. Economic development means different things to different people.
Refer to your Expeditions in Reading book for a complete version of this text.
Based on “Solar Power for Public Buildings,” which answer best states the author’s position on the use of solar power in California?
A The use of solar energy will double the pollution produced in California.
B The state’s tap water will be purer if processed in solar-powered plants.
C Increasing the use of solar power will positively impact the environment.
D Solar panels remove most of the toxic chemicals found in the atmosphere.
Answer:
d
Explanation:
Answer:
D. Solar panels remove most of the toxic chemicals found in the atmosphere.
People do not believe it is possible to use the sun's energy to create electricity.
Explanation:
I did the test.
How does the sun maintain its high temperature and energy output?
Answer:
The core of the sun is the region that extends from the center to about 20–25% of the solar radius. It is here, in the core, where energy is produced by hydrogen atoms (H) being converted into nuclei of helium (He). ... The core is the only part of the sun that produces an appreciable amount of heat through fusion.
Explanation:
I got you
By not running out of fuel (Hydrogen).
Rest assured ... When the sun runs low on Hydrogen, it'll go through several complex changes, and it'll end up at much much lower temperature, with much much lower energy output.