Answer:
Normality is the number of gram equivalents of solute divided by the volume in liters.
The molarity is the amount of moles in solute divided by the volume in liters.
Moles are the molar mass times grams if you're curious
I hope this helps and good luck!
Answer:
Molarity and normality describe the numbers (moles) of reactants or products dissolved in one liter of solution. Molarity: M = moles of solute contained in one liter of solution. ... Normality is always a multiple of molarity. It describes the “equivalent” moles of reactants involved in chemical reactions.
Explanation:
Normality is a measure of concentration equal to the gram equivalent weight per litre of solution. Gram equivalent weight is the measure of the reactive capacity of a molecule. The solute's role in the reaction determines the solution's normality. Normality is also known as the equivalent concentration of a solution.
Molar concentration is a measure of the concentration of a chemical species, in particular of a solute in a solution, in terms of amount of substance per unit volume of solution.
Formula for Molar: M = [tex]\frac{n}{v}[/tex]
WILL GIVE 50 POINTS AND BRAINLIEST
Plate Tectonics Lab Report
Instructions: In the Plate Tectonics lab you will investigate the interactions between continental and oceanic plates at convergent, divergent, and transform boundaries around the globe. Record your observations in the lab report below. You will submit your completed report.
Name and Title:
Include your name, instructor's name, date, and name of lab.
Objective(s):
In your own words, what was the purpose of this lab?
Hypothesis:
In this section, please include the if/then statements you developed during your lab activity for each location on the map. These statements reflect your predicted outcomes for the experiment.
Location One: Select two events that you predict will be observed. If I explore two continental plates at a convergent boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Two: Select three events that you predict will be observed. If I explore two continental plates at a divergent boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Three: Select three events that you predict will be observed. If I explore two continental plates at a transform boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Four: Select two events that you predict will be observed. If I explore two oceanic plates at a convergent boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Five: Select three events that you predict will be observed. If I explore two oceanic plates at a divergent boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Six: Select two events that you predict will be observed. If I explore two oceanic plates at a transform boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Procedure:
The procedures are listed in your virtual lab. You do not need to repeat them here. Please be sure to identify the test variable (independent variable), outcome variable (dependent variable).
Reminder: Test variable = the item you are changing or manipulating; Outcome variable = the item you are measuring
Test variable (independent variable):
Outcome variable (dependent variable):
Data:
Record the data from each location below.
Location Name Boundary Type
(C=Convergent, D=Divergent, or T=Transform) Year Observed
(5, 10, or 20 million years) Geologic Events Observed
(earthquakes, faults, ocean formation, mountains, volcanoes, island chains, seafloor spreading)
Location One
Himalayas 5 Event 1-
20 Event 2-
Location Two
East Africa 5 Event 1-
10 Event 2-
20 Event 3-
Location Three
San Andreas fault zone 5 Event 1-
10 Event 2-
20 Event 3-
Location Four
Aleutian Islands 5 Event 1-
20 Event 2-
Location Five
Mid-Atlantic Ridge 5 Event 1-
10 Event 2-
20 Event 3-
Location Six
Alpine Fault 5 Event 1-
20 Event 2-
Conclusion:
Your conclusion will include a summary of the lab results and an interpretation of the results. Please write in complete sentences.
What types of geological events or changes occur at divergent plate boundaries?
What types of geological events or changes occur at convergent plate boundaries?
What types of geological events or changes occur at transform plate boundaries?
Explain how these geological processes and interactions have changed Earth's surface through the years. Be sure to use evidence to support your answer.
Answer:
here are what i have so far, im doing this right now
Explanation:
Plate Tectonics Lab Report
Instructions: In the Plate Tectonic lab you will investigate the interactions between continental and oceanic plates at convergent, divergent, and transform boundaries around the globe. Record your observations in the lab report below. Y
Objective(s):
To look at interactions between continental and oceanic plates, etc.
Hypothesis:
In this section, please include the if/then statements you developed during your lab activity for each location on the map. These statements reflect your predicted outcomes for the experiment.
Location One: Select three events that you predict will be observed. If I explore two continental plates at a convergent boundary, then I will observe:
• earthquakes
• mountains
• volcanoes
Location Two: Select three events that you predict will be observed. If explore two continental plates at a divergent boundary, then I will observe:
• ocean formation
• volcanoes
• seafloor spreading
you will submit your completed report
ps; you might want to change up the objective.
A geological event is a brief, spatially diverse, dynamic and ongoing occurrence in the history of the Earth.
What is geological event?A geological event is a brief, spatially diverse, dynamic (diachronous), and ongoing occurrence in the history of the Earth that aids in the modification of the Earth system and the production of geological strata. The concept of event stratigraphy initially came up as a way to identify, analyse, and correlate how significant physical and biological events have affected the overall stratigraphical record.
Israel's Dead Sea basin Holocene sediments contain seismic activity. This can be considered a record of a geological event, an earthquake, that altered the strata. Geological events can occur over timescales of order of magnitude, from just a few seconds through millions of years, as well as on a variety of spatial scales, from the local to the globe.
1. Volcanoes and minor earthquakes
2. Volcanoes, earthquakes and fold mountains.
3. Earthquakes and fold mountains.
4. Magma from volcanoes is filled with nutrients that makes land fertile.
Therefore, a geological event is a brief, spatially diverse, dynamic and ongoing occurrence in the history of the Earth.
To know more about geological event, here:
https://brainly.com/question/2372671
#SPJ3
A gas expands from 285 mL to 789 mL at constant temperature. How much work is done by the gas (joules) if it expands against a constant pressure of 6.00 atm?
Answer:
-306j
Explanation:
For this question we define an equation:
W = -Pext(Vj-Vi)-----> eqn 1
P = 6atm
Vi = 285 ml
We convert it to litre
= 285/1000 mL
= 0.285 L
Vj = 789 mL
When converted to litre
= 789/1000 mL
= 0.789 L
These values are all going to be put values in the eqn 2 above
W = -Pext(Vj-Vi)
W = -6.0x (0.789L - 0.285L)
W = -3.024
W = -3.024 x 101.33 J
This gives us the answer
W = -306 J
Thank you!
Answer: -306 J
Scientists discover remains of wooden structures near a Celtic runes site. What kind of testing will indicate when the stones were moved into place by the Celts?
Carbon dating
Radioactive dating
Answer:
Carbon
Explanation:
Bc i got this question on my test
Answer:
A. Carbon dating
Explanation:
I took the test proof
Is steel wool and vinegar an exothermic reaction? Explain.
Answer:
Vinegar contains acetic acid which removes this coating. When the protective coating is removed, oxygen in the atmosphere can reach the iron in the steel wool and a chemical reaction called oxidation occurs. ... This reaction is also an exothermic reaction. It creates heat energy
Explanation:
hope this helps u
Vinegar incorporates acetic acid which gets rid of this coating. When the defensive coating is removed, oxygen in the environment can reach the iron in the metal wool and a chemical reaction called oxidation occurs. This reaction is additionally an exothermic reaction. It creates warmth energy.
Hope it helped! Have a nice day! <3
which of the following is an example of
a physical property?
Answer:
physical property is property that you can touch, smell as it is bumpy it smells like eggs.
Explanation:
YW
Answer:
Physical properties include: appearance, texture, color, odor, melting point, boiling point, density, solubility, polarity, and many others.
Explanation:
Consider the following equilibrium.
NH3(aq) + H2O(l) equilibrium reaction arrow NH4+(aq) + OH −(aq)
What will happen to the equilibrium constant if the concentration of OH − increases through the addition of a small amount of NaOH(aq)?
Answer:
It will remain the same
Explanation:
The equilibrium constant of the reaction will remain the same if the concentration of the OH is increased.
Changes in concentration values of any of the reactant does not affect the value of the equilibrium constant.
The equilibrium constant is a constant at a given temperature. It is temperature dependent. Since we have no change in temperature, therefore, the equilibrium constant will not change.The equilibrium constant if the concentration of OH − increases through the addition of a small amount of NaOH(aq) is :
- Remains same.
Equilibrium ReactionThe equilibrium constant of the response will stay the same in case the concentration of the OH is increased.
Changes in concentration values of any of the reactant does not influence the esteem of the equilibrium constant.
The equilibrium constant may be a consistent at a given temperature.
It is temperature dependent. Since we have no alter in temperature.Learn more about "Equilibrium":
https://brainly.com/question/15244329?referrer=searchResults
. Calculate the pH, pOH, Ka, Kb, pKa, and pKb for a 0.082M solution of triethylamine?
Answer:
pH = 4.40
Explanation:
In Bohr model N3 moves up to N 4 the electron occupies distinct energy states where energy is absorbed or emmitted
Answer:
vkhcohvoccf
uxihfoydohfufyfocidicicugxigdixifxtxtduration jfhgxfcixig
cigcih
Explanation:
cihcohcohccohcjjcofidytstitddgggxogxxtdrrtteeeeeiiiixiiitttdooodooxyక్సజిఫ్స్ట్టిగ్గ్స్గ్డ్గ్
Calculate the percent composition by mass of each element in Al(OH)3.Al(OH)3. Use at least three significant figures.
Answer:
Explanation:
Al(OH)₃
Total molecular weight = 27 + 3 x ( 16+1)
= 78
Al = 27
% of Al = 27 x 100 / 78 = 34.61%
O = 48
% of O = 48 x 100 / 78 = 61.55 %
H = 3
% of H = 3 x 100 / 78
= 3.84%
Al = 34.61%.
O = 61.55%.
H = 3.84%.
What is the pH value of distilled water?
Answer:
7
Explanation:
pls help!!
The number that represents a neutral pH is ________.
Answer:
7
Explanation:
Which problem that the most scientists believe is partly caused by carbon dioxide?
Answer:
Climate change
Explanation:
Climate change is primarily a problem of too much carbon dioxide (CO2) in the atmosphere. This carbon overload is caused mainly when we burn fossil fuels like coal, oil and gas or cut down and burn forests
state Graham's law diffusion of gas mathematical expression ?
Answer:
Graham's law states that the rate of diffusion or of effusion of a gas is inversely proportional to the square root of its molecular weight
Explanation:
HEEEELLLPPPP PLEASE I WILL MARK BRAINLIEST
Which statement accurate describes plate tectonics?
Answer:
the lithosphere is broken into sections called plates.
Answer:
The lithosphere is broken into sections called plates.
Explanation:
edge2020
were are you guys 123456789789456123456789123456789456
How do you determine whether an acid should be broken up into ions in the
complete ionic equation?
Answer:
When chemicals in solution react, the proper way of writing the chemical formulas of the dissolved ionic compounds is in terms of the dissociated ions, not the complete ionic formula. A complete ionic equation is a chemical equation in which the dissolved ionic compounds are written as separated ions.
When sodium atoms (Na) and chlorine atoms (CI) join to make
Answer: Potassium and fluorine
Explanation:
The two rows form bonds the easiest
Answer: #1
Explanation:
As you move from N to Bi, the metallic properties of the element
A. increases.
C. remains the same.
B. decreases.
D. does not follow a trend.
Answer:
b. decreases
Explanation:
i just took a test on it
As you move from N to Bi, the metallic properties of the element decrease. The correct option is B.
What are nitrogen and bismuth?Nitrogen is a chemical element, whose chemical element is N. Nitrogen is a gas and its atomic number is 7. It is a non-metal and is present in group 15 of the periodic table.
Bismuth is a chemical element, whose chemical element is Bi. It is a post-transition metal, and it is also present in group 15 of the periodic table near arsenic and antimony. Its atomic number is 83.
Now, nitrogen and bismuth are present in the same line and group. Nitrogen is the first element of the group and going down, there is bismuth present in the group last. So the metallic property decreases from going down the group.
Thus, the correct option is B. decreases.
To learn more about nitrogen and bismuth, refer to the link:
https://brainly.com/question/24309770
#SPJ2
The half life of radium-226 is 1600 years.
a. After how many half-lives would 25% of the radium-226 remain.
b. Write a function m(t) that models the mass remaining after years.
c. How much of the sample will remain after 3000 years?
d. After how long will only 15 mg of the sample remain?
Answer:
Explanation:
a )
half life = 1600 years
50% in 1600 years
25% in next 1600 years
so 25% in total of 3200 years .
b )
disintegration constant = .693 / half life
= .693 / 1600
λ= 4.33 x 10⁻⁴ year⁻¹
m(t) = [tex]m_0e^{-\lambda t }[/tex]
m₀ is initial mass , λ = 4.33 x 10⁻⁴ year⁻¹
c )
m(t) after 3000 years , t = 3000
m(t) = [tex]m_0e^{-4.33\times10^{-4 }\times 3000 }[/tex]
= [tex]m_0e^{-1.3}[/tex]
= .2725 m₀
percentage of mass remaining = 27.25 %
25% radium-226 remain after 3200 years. 6.82 mg of sample remains after 3000 years. 15 mg of the sample will stay long about 1179. 19 years.
Half life of radium-226 = 1600 years
What is half-life?
half-life, in radioactivity, the interval of time required for one-half of the atomic nuclei of a radioactive sample to decay.
Calculation of each part can be done as
a )
half-life = 1600 years
50% in 1600 years
25% in next 1600 years
so 25% in total of 3200 years .
b )
Let decay function is
[tex]m(t) = m_o e^{-kt} \ \ \ \ \ ...(i)\\[/tex]
where k is decay constant
At half life,
[tex]m(t) = \frac{m_o}{2},t= 1600\ years\\So,\ \frac{m_o}{2} = m_oe^{-k1600}\\\frac{1}{2} = e^{-k1600}\\[/tex]
applying log on both sides
[tex]ln \frac{1}{2} = lne^{-1600k}\\-0.693147 = -1600 k \\k =\frac {0.693147}{1600}\\k = 4.332\times10^{-4}\\[/tex]
substitute the value of k in equation (i)
[tex]m(t) = m_oe^{-4.332\times10^{-4t}}\\m(t) = 25e^{-0.0004332t}[/tex]
c) when t = 3000 years
[tex]m(t) = 25e^{-0.0004332t}[/tex]
[tex]m(3000) = 25e^{-0.0004332\times3000}[/tex]
remain sample after 3000 years = 6.82 mg
d) when m(t) = 15 mg
[tex]15 = 25e^{-0.0004332t}\\e^{-0.0004332 t} = \frac{15}{25}\\applying\ log\ on\ both\ side\\ln \ e^{-0.0004332t}=ln(\frac{15}{25)}\\-0.0004332t = -0.510825\\t=\frac{0.510825}{0.0004332}\\t= 1179.19 \ years[/tex]
Hence, this is the required answer.
To learn more about radioactive substances, click here:
https://brainly.com/question/7144748
Sulfur has an electronegativity of 2.58, while Cesium has a value of 0.79. Based on this information, they would have what kind of chemical bond?
Answer:
Ionic
Explanation:
Because sulphur is a non-metal and cesium is part of the group 1 Alkali Metals, this creates an ionic bond
Ionic bonds are created from one metal and one non-metal element.
This still is declared as Ionic despite the balance of this is Cs2S
3.0 x 108 m/s is the
Answer:
Speed of light
Explanation:
The value 3.0 x 10⁸m/s is taken as the speed of light.
It is a constant.
It implies that light travels a distance of 3 x 10⁸ in just one second. This value is for the speed of light in a vacuum when there are not particles obstructing its movement. The speed of electromagnetic radiations in free space is also taken as the speed of light.Nose color is an inherited trait in dogs. Two puppies from the same set of parents have different color noses. One puppy has a pink nose and one puppy has a black nose. How can puppies from the same set of parents have different color noses?
A.
The pink-nosed puppy and the black nosed puppy must not actually be related.
B.
The pink-nosed puppy and the black nosed puppy inherited different combinations of the genes for nose color from their parents.
C.
The pink-nosed puppy has a different number of chromosomes than the black nosed puppy.
D.
The pink nosed puppy and the black nosed puppy have different chromosomes for the two nose colors.
Answer:
I thin its B im not sure though
Explanation:
The puppies from the same set of parents have different color noses because the pink-nosed puppy and the black nosed puppy inherited different combinations of the genes for nose color from their parents. Thus, the correct option is B.
What is a gene?A gene is the unit of inheritance which is made up of DNA (deoxyribonucleic acid). Every person receives two copies or alleles of each gene which is inherited from each of the two parent.
Genes are made up of DNA, so each of the chromosome contains many different genes. Genes carry the information which determines the traits or characteristics that are passed on to their offspring or inherited from the parents.
The puppies from the same set of parents have different colored noses because pink-nosed puppy and the black nosed puppy inherited different combinations of the genes for nose color from their parents.
Therefore, the correct option is B.
Learn more about Inheritance here:
https://brainly.com/question/14930526
#SPJ2
how many moles of nitroge are there in 50.0 g of nitrogen?
1.785714286 moles
The number of moles (n) for nitrogen is: [ n=50.0÷28.0 ] = 1.785714286 moles.
SO3 is a covalent compound with no lone pairs on the central S atom. What's the structure of a molecule of SO3? Is an SO3 molecule polar or non-polar?
Question 14 options:
A)
Trigonal planar, non-polar
B)
Trigonal pyramidal, polar
C)
Trigonal planar, polar
D)
Trigonal pyramidal, non-polar
Answer:
A
Explanation:
it has non polar molecule, because it has the equal sharing of electrons, so equal repulsion from all sides. atoms are equally represented.
Answer:
Trigonal planar, non-polar
Explanation:
A very new item just arrived in the market. It is very good for construction, and other things. Now, this item has chemicals, and in every drop, there are 400 grams of NaCI. If there are 10 drops in this item, how many grams of NaCI are in one bottle?
Answer: 4,000 grams of NaCI
Explanation:
We know that there are 400g of NaCI in one drop.
This bottle has 10 drops of this item.
So, we have to multiply the amount of NaCI in a drop by the amount of drops.
400 x 10 = 4,000.
The answer to the question is 4,000. Hope this helps!
You have two containers. The first container contains 22.99 grams of solid
sodium (Na). The second container contains 15.999 grams of Oxygen (O).
Which container has more moles of the indicated substance? *
Answer:
The sodium has more moles.
n(Na)=2.09 mole
n(O)=0.999 mole
The Lewis representation above depicts a reaction between hydrogen (blue) and a main-group element from group 5A (red). In this representation, each Y atom needs electron(s) to complete its octet, and gains these electrons by forming bond(s) with atoms of H . There are unshared electron pair(s) and bonding electron pair(s) in the product molecule. The bonds in the product are _________ .
Answer:
Each Y atom needs three electrons to complete its octet by forming three bonds to hydrogen. There is one unshared pair of electrons and three bonding pairs of electrons. The bonds in the product are covalent.
Explanation:
Recall that group 5A elements contain five electrons in their outermost shell. These five electrons consists of a lone pair and three electrons that can form three bonds with hydrogen to give YH3 where Y is the group 5A element.
The YH3 molecule contains one lone(unshared) pair of electrons as well as three bonding pairs of electrons. The compounds are covalent.
What are the two processes of ocean to cloud?
Answer: The excess amount changes from a gas into a liquid or solid (ice). The process of water changing from a gas to a liquid is called "condensation," and when gas changes directly into a solid, it is called "deposition." These two processes are how clouds form.
Which best describs the energy transformation in a battery powered flash light ?
a
Chemical, to electrical, to thermal, to radiant
b
nuclear, to electrical, to thermal, to radiant
c
Mechanical, to electrical, to Thermal, to radiant
d
Chemical, to electrical, to mechanical, to radiant
Answer:
I think it's C
Explanation:
Sorry if its wrong
Answer:
C
Explanation: