Electricity is just the flow of electrons or charges from a point of production through a conductor, to another point where it can be utilized or converted to another form of energy.
Magnetism is the force exerted by magnets when they attract or repel each other. Magnetism is caused by the motion of electric charges from two or more magnetic substances.
Answer:
By Electricity.. We mean the Flow of electrical power or Charge.
While Magnetism is a phenomenon that occurs from or by the Motion of Charges
Mass, volume and density are all properties of
Answer:
Properties of matter
Explanation:
All properties of matter are either extensive or intensive and either physical or chemical. Extensive properties, such as mass and volume, depend on the amount of matter that is being measured. Intensive properties, such as density and color, do not depend on the amount of matter.
Answer:
The pythagoream theorem
Explanation:
A negative correlation coefficient, such as -.89, means
A. There is no relationship between two variables.
B. As one variable tends to increase or become larger, the other decreases or becomes smaller.
C. There is a direct relationship. As one variable increases, the other also increases or becomes larger.
D. Nothing, a mistake has been made.
Answer:
B - As one variable increases the other decreases. (-1 to +1) coefficient
Moving current has electrical energy.
If the output work of a simple machine equals the input work, the machine is said to have ______ efficiency.
If the output work of a simple machine equals the input work, the machine is said to have 100% efficiency.
[tex]\circ \: \: { \underline{ \boxed{ \sf{ \color{green}{Happy\:learning.}}}}}∘[/tex]
g Monochromatic light with wavelength 633 nn passes through a narrow slit and a patternappears on a screen 6.0 m away. The distance on the screen between the centers of thefirst minima on either side of the screen is 32 mm. How wide (in mm) is the slit
Answer:
d = 1.19 x 10⁻⁴ m = 0.119 mm
Explanation:
This problem can be solved by using Young's double-slit experiment formula:
[tex]Y = \frac{\lambda L}{d}[/tex]
where,
Y = fringe spacing = 32 mm = 0.032 m
L = slit to screen distance = 6 m
λ = wavelength of light = 633 nm = 6.33 x 10⁻⁷ m
d = slit width = ?
Therefore,
[tex]0.032\ m = \frac{(6.33\ x\ 10^{-7}\ m)(6\ m)}{d}\\\\d = \frac{(6.33\ x\ 10^{-7}\ m)(6\ m)}{0.032\ m}[/tex]
d = 1.19 x 10⁻⁴ m = 0.119 mm
Henry has 8 pieces of pizza that he wants to give equally to 3 friends how much pizza will each friend get
If a 4 Ohm resistor and a 12 Ohm resistor are connected in parallel, what is the total
resistance?
Rt = 3 ohms
Explanation:
Let R1 = 4-ohm resistor
R2 = 12-ohm resistor
For 2 resistors connected in parallel, the total resistance Rt is given by
1/Rt = 1/R1 + 1/R2
or
Rt = R1R2/(R1 + R2)
= (4 ohms)(12 ohms)/(4 ohms + 12 ohms)
= 48 ohms^2/16 ohms
= 3 ohms
Two long anti-parallel current-carrying wires carry currents of 20 A and 5.0 A. If the wires are separated by 20 cm. Find the magnitude of the magnetic field a point equally separated between both wires.
Answer:
5 x 10⁻⁵ T
Explanation:
Magnetic field at a point d distance away from a current carrying wire having current of I
B = 10⁻⁷ x 2I / d
Here magnetic field due to current of 20 A
B₁ = 10⁻⁷ x 2 x 20 / 10 x 10⁻²
= 4 x 10⁻⁵ T .
Here magnetic field due to current of 5 A
B₂ = 10⁻⁷ x 2 x 5 / 10 x 10⁻²
= 10⁻⁵ T .
These magnetic fields are acting in the same direction
Total magnetic field
B = B₁ + B₂
= 4 x 10⁻⁵ + 10⁻⁵ = 5 x 10⁻⁵ T .
If an electromagnetic wave has a frequency of 6×10^5 hz, what is its wavelength? what is its wavelength? A. 2 x 10^12m, B. 5 x 10^14m, C. 5 x 10^2m, 2 x 10^-3m
Answer:
5*10^2
Explanation:
A p e x
A 35.0 g bullet strikes a 5.3 kg stationary wooden block and embeds itself in the block. The block and bullet fly off together at 7.1 m/s. What was the original speed of the bullet? (WILL GIVE BRAINLIEST)
Answer:
= 1200m/s or 1.2 x [tex]10^{3}[/tex] m/s
Explanation:
Help me please I don’t understand
Answer:
a. hydroelectric power plant
Problem 3:A starship voyages to a distant planet 10 ly away. The astronauts in the starship reach theplanet and then they immediately return to the Earth at the same speed. The round trip from the Earthto the planet and back to the Earth takes 25 years.(a) What is the speed of the starship
Answer:
speed = 0.8c
Explanation:
Given :
Distance from earth to the distant planet = 10 ly
Time taken by the astronauts for the entire journey = 25 years
The time taken to reach the planet is [tex]$t_1=\frac{25}{2}$[/tex]
= 12.5 years
Therefore, speed of the starship can be calculated by :
[tex]$\text{Speed} = \frac{\text{distance}}{\text{time}}$[/tex]
[tex]$v=\frac{10 \times c \times 3.15 \times 10^7}{12.5 \times 3.15 \times 10^7}$[/tex]
[tex]$=0.8c$[/tex]
Therefore the speed of the starship is 0.8c
A 0.413 kg block requires 1.09 N
of force to overcome static
friction. What is the coefficient
of static friction?
(No unit)
PLEASE HELP!
Answer:
static friction=0.126
. A small car of mass m and a large car of mass 2m drive around a highway curve of radius R. Both cars travel at the same speed (v). The
centripetal acceleration (Grad) of the large car is the centripetal acceleration of the small car.
four times
twice
half
equal to
Complete question is;
A small car of mass m and a large car of mass 2m drive around a highway curve of radius R. Both cars travel at the same speed (v). The
centripetal acceleration (Grad) of the large car is the centripetal acceleration of the small car. How does the Force of the small car FS compare to the force of the large car FL as they round the curve.
four times
twice
half
equal to
Answer:
Half
Explanation:
Formula for centripetal force is given as;
F = mv²/R
Where;
v is velocity
R is radius
Now, centripetal acceleration is given by;
a = v²/R
Since they both travel with the same velocity V and radius remains the same, we can say that;
F = ma
For the small car;
FS = ma
For the big car;
FL = 2ma
This means the force of the small car is half of that of the Large car
Thus;
FS = ½FL
Copper wires are used as connecting wires because
(1 Point)
Copper has very high melting point
Copper wires are very thick wires
Copper wire offers a lower resistance
Copper wire has an attractive colour
[tex]\huge{ \mathfrak{ \underline{ Answer }\: \: ✓ }}[/tex]
Copper wires are used as connecting wires in circuits because they offer very less resistance.
__________________________________________________________
[tex]\mathrm{ ☠ \: TeeNForeveR \:☠ }[/tex]
WILL GIVE BRAINLIEST
Answer:
[tex]2\:\mathrm{m/s^2}[/tex]
From Newton's 2nd Law, we have [tex]\Sigma F=ma[/tex]. Substituting given values, we have:
[tex]40=20a,\\a=\frac{40}{20}=\boxed{2\:\mathrm{m/s^2}}[/tex]
the caste system is an example of
Answer:
It is example of Closed system
24. A anvil with a mass of 60 kg falls from a height of 9.5 m. How fast is it going right
before it hits the ground?
V= I*R
V = voltage (measured in volts) V
I = current (measured in amperes) A
R = resistance (measured in Ohms) Ω
So they give us this
V=IR
V= 1.8
I=0.4
R=?
So we insert the thing that we know.
1.8=0.4*R
We need to leave our unknown value alone. So if our value of 0.4 is multiplying the unknown value it passes to the other side dividing.
So we have this.
Lastly we solve.
R=4.5ohms
The formula to find R is V=IR
V/I=R
So the resistance will be the Voltage divided by the Current
WILL GIVE BRAINLIEST
The door is 2 m tall. How tall is it in inches? Note: There are 2.54 cm in 1 inch.
A. 78.7 in
B. 500 in
C. 787.4 in
D. 201.4 in
Answer:
Height of the door = 2m = 2000 cm
1 in = 2.54 cm
So 1 cm = 1/2.54 in
2000 cm = 200000/ 254
=
787.401574803
So no.c is correct
The door is 78.7 inch tall. Hence, option (A) is correct.
What is unit of length?Any arbitrarily selected and widely used reference standard for length measurement is referred to as a unit of length. The metric system, which is adopted by every nation on earth, is the most widely utilized in modern times.
The American customary units are also in use in the United States. In the UK and several other nations, British Imperial units are still used sometimes. There are SI units and non-SI units in the metric system.
Given that: the height of the door is = 2 meter
= 2*100 centimeter
= 200 centimeter.
There are 2.54 centimeter in 1 inch.
Hence, the height of the door is = 2 meter = 200 centimeter
= (200/2.54) inch
= 78.7 inch.
The door is 78.7 inch tall.
Learn more about length here:
https://brainly.com/question/17139363
#SPJ2
A man on the Moon observes two spaceships coming toward him from opposite directions at speeds of 0.600c and 0.600c. What is the relative speed of the two ships as measured by a passenger on either one of the spaceships
Answer:
If we use the equation for the transformation of velocities for moving frames:
v' = (v - u) / (1 - u * v / c^2) where we measure the speed of v' approaching from the left where v is in a frame moving at -u towards v'
v' = (.6 c - (-.6 c)) / (1 - (-.6 c) * .6 c / c^2) = 1.2 c / (1 + .6 * .6)
or v' = 1.2 c / (1 + .36) = .88 c
v is approaching from the left at .6 c in the reference frame and the other frame approaches from the right at -.6 c with speed u (-.6 c) and we measure the speed of v as seen in the frame moving to the left
source of sinusoidal electromagnetic waves radiates uniformly in all directions. At a distance of 10.0 m from this source, the amplitude of the electric field is measured to be 3.50 N>C. What is the electric-field amplitude 20.0 cm from the source
Answer:
[tex]175\ \text{N/C}[/tex]
Explanation:
[tex]E_1[/tex] = Initial electric field = 3.5 N/C
[tex]E_2[/tex] = Final electric field
[tex]r_1[/tex] = Initial distance = 10 m
[tex]r_2[/tex] = Final distance = 20 cm
Electric field is given by
[tex]E=\sqrt{\dfrac{2P}{\pi r^2c\varepsilon_0}}[/tex]
So,
[tex]E\propto \dfrac{1}{r}[/tex]
[tex]\dfrac{E_2}{E_1}=\dfrac{r_1}{r_2}\\\Rightarrow E_2=E_1\dfrac{r_1}{r_2}\\\Rightarrow E_2=3.5\dfrac{10}{0.2}\\\Rightarrow E_2=175\ \text{N/C}[/tex]
The electric field amplitude at the required point is [tex]175\ \text{N/C}[/tex].
With what tension must a rope with length 2.90 m and mass 0.125 kg be stretched for transverse waves of frequency 42.0 Hz to have a wavelength of 0.740 m
Answer:
41.64 N
Explanation:
Applying,
v = √(T/m')................ Equation 1
Where v = velocity of the wave, T = Tension of the rope, m' = mass per unit length of the rope.
make T the subject of the equation,
T = v²m'................. Equation 2
But,
v = λf............... Equation 3
Where λ = wavelength, f = frequency
And
m' = m/L........... Equation 4
Where m = mass of the rope, L = length of the rope
Substitute equation 3 and equation 4 into equation 2
T = (λf)²(m/L).............. Equation 5
From the question,
Given: λ = 0.740 m, f = 42 Hz, m = 0.125 kg, L = 2.9 m
Substitute these values into equation 5
T = (42×0.74)²(0.125/2.9)
T = 41.64 N
Are surface currents warm or cold?
A:war m
B:cold
Answer:
Cold
Explanation:
Im pretty sure im sorry if I am wrong
One thing you really notice is the complex, feathery, knotty structure of the gas and dust in our galaxy. If you look around, you can see a couple more objects that might be good candidates for being other galaxies with their own star-forming regions. What are these objects called
Answer:
Orion Nebula & cone nebula
Explanation:
From the huge, youthful stars that are forming the nebula to the pillars of thick gas that could be the homes of burgeoning stars, the Orion Nebula is a picture book of star formation. The four heaviest stars in the nebula reside in the bright central field. Since the stars are arranged in a trapezoid shape, they are known as the Trapezium.
These stars' ultraviolet radiation is cutting a hole in the nebula and stars that are already young enough to have disks of material encircling them can be seen near the Trapezium stars. Protoplanetary disks, also known as (proplyds) are too small to be seen distinctly and the disks are the foundation of solar systems.
The Cone Nebula is a monstrous creation, which resembles a nightmare beast flaring up from a crimson sea, is simply a benevolent pillar of gas and ashes. The Cone Nebula is so identified because it has a conical appearance in ground-based photographs. This massive pillar is located in a tumultuous star-forming area with gnarled mountainpeak of cold gas and dust is visible.
Using a 2.5 meter long lever, we want to lift a body weighing 15 kilograms. If the lever support so that the pitch of the load is 55 cm, determine the force we must apply to be lift that burden? HURRYYYYY PLEASE ITS A TEST
Answer:
F = 668.9N
Explanation:
Using the formula;
m1d1 = m2d2
m1 and m2 are the masses
d1 and d2 are the distances
Substitute;
15 * 2.5 = x * (55/100) [55cm was converted to metres]
37.5 = 0.55x
Swap
0.55x = 37.5
x = 37.5/0.55
x = 68.18kg
Since F = mg
F = 68.18 * 9.81
F = 668.9N
This gives the required force
I NEED HELP THIS QUESTION IS SO HARDDD!!
Answer:
c
Explanation:
search it up
Answer:
Option A.
Explanation:
Because this is a lunar eclipse it normally happens 2 times a year. This is a decently rare phenomenon due to the positions they have to be in to make a lunar eclipse. Therefore, it is option A.
If a coworker repeatedly asks you out for a date even though she knows you are not interested, what is she guilty of?
A. discrimination
OB. hate speech
OC. psychological harassment
O D. sexual harassment
1. Pam has a mass of 48.3 kg and she is at rest on
smooth, level, frictionless ice. Pam straps on
a rocket pack. The rocket supplies a constant
force for 27.3 m and Pam acquires a speed of
62 m/s.
What is the magnitude of the force?
Answer in units of N.
2. What is Pam’s final kinetic energy?
Answer in units of J.
3. A child and sled with a combined mass of 55.7
kg slide down a frictionless hill that is 11.3 m
high at an angle of 29 ◦
from horizontal.
The acceleration of gravity is 9.81 m/s
3. If the sled starts from rest, what is its speed
at the bottom of the hill?
Answer in units of m/s
Answer:
1. F = 3400 N = 3.4 KN
2. [tex]K.E_f=92832.6\ J = 92.83\ KJ[/tex]
3. v = 14.9 m/s
Explanation:
1.
First, we will calculate the acceleration of Pam by using the third equation of motion:
[tex]2as = v_f^2-v_i^2[/tex]
where,
a = acceleration = ?
s = distance = 27.3 m
vf = final speed = 62 m/s
vi = initial speed = 0 m/s
Therefore,
[tex]2a(27.3\ m) = (62\ m/s)^2-(0\ m/s)^2\\\\a = 70.4\ m/s^2[/tex]
Now, we will calculate the force by using Newton's Second Law of Motion:
F = ma
F = (48.3 kg)(70.4 m/s²)
F = 3400 N = 3.4 KN
2.
Final kinetic energy is given as:
[tex]K.E_f = \frac{1}{2}mv_f^2\\\\K.E_f = \frac{1}{2} (48.3\ kg)(62\ m/s)^2[/tex]
[tex]K.E_f=92832.6\ J = 92.83\ KJ[/tex]
3.
According to the law of conservation of energy:
[tex]Potential\ Energy\ at\ top = Kinetic\ Energy\ at\ bottom\\mgh = \frac{1}{2}mv_2 \\\\v = \sqrt{2gh}[/tex]
where,
v = speed at bottom = ?
g = acceleration due to gravity = 9.81 m/s²
h = height at top = 11.3 m
Therefore,
[tex]v = \sqrt{(2)(9.81\ m/s^2)(11.3\ m)}[/tex]
v = 14.9 m/s
Convex lenses cause light rays to _____.
Answer:
to meet at a single point
(causing rays of light that are initially parallel to meet at a single point)
hope this helps:)
Explanation:
Answer:
focus
Explanation:
see more here
https://youtu.be/CJ6aB5ULqa0