What is matter?
O A. Anything that has energy and motion
B. Anything that takes up space and has mass
C. Anything that can be seen
D. Anything that can be measured

Answer:  Okay so i don't know how i can explain this but.. OK so Steven placed an ice cream scoop right? and put it under hot water so i would say it would make the ice cream scoop hot? and then using it to scoop the ice cream i could say it would be a melting affection i think

Explanation:

im am so sorry pls forgive me is i am wrong i tried my best so at least give me a like for effort.. i hope u have a great day :)

Answer:

The solubility of gases decreases with pressure as that of solids and liquids is not affected.

Solution :

a). [tex]$SO_3$[/tex]

  This compound is known as sulfur trioxide.

  The molecular shape of sulfur trioxide is trigonal planer.

   And the bond angle is 120°.

b). [tex]$N_2O$[/tex]

   This compound is known as Nitrous oxide. Here, nitrogen is in the center.     There is no lone pair around the nitrogen atom and it forms two sigma bonds with the other two atoms.

 It is linear in shape.

  The bond angle between them is 180°.

c). [tex]$CH_2Cl_{2}$[/tex]

  This compound is known as the Dichloromethane.

   The molecular shape of the compound is tetrahedral.

   The bond angles is 120°

Answer:

Kind of like DNA or a part of DNA

Explanation:

They are what make you a person, no they aren't the same

Answer:

C. 2Fe + 3Cl2 + 2FeCl3

Explanation:

Hello there!

In this case, according to the given chemical reaction:

Fe + Cl2 → FeCl3

It turns out possible to balance it via cross-multiplying the chlorine atoms as they do not result from a whole number multiplication; it means we get:

Fe + 3Cl2 → 2FeCl3

And we just balance Fe by placing a 2 on Fe:

2Fe + 3Cl2 → 2FeCl3

Thus, the answer is C. 2Fe + 3Cl2 + 2FeCl3  

Regards!

Answer:

0.244 M.

Explanation:

From the question given above, the following data were obtained:

Molarity of stock solution (M₁) = 1 M

Volume of stock solution (V₁) = 0.305 L

Volume of diluted solution (V₂) = 1.25 L

Molarity of diluted solution (M₂) =?

The molarity of the diluted solution can be obtained by using the dilution formula as illustrated below:

M₁V₁ = M₂V₂

1 × 0.305 = M₂ × 1.25

0.305 = M₂ × 1.25

Divide both side by 1.25

M₂ = 0.305 / 1.25

M₂ = 0.244 M

Thus, the molarity of the diluted solution is 0.244 M

Answer:

1 - Salts required  that can be compared directly, using Ksp values, to estimate solubilities for copper (II) sulfide are - [tex]CaSO_3[/tex] (Option b) ,[tex]BaCrO_4[/tex] (Option c) and [tex]CaS[/tex] (Option d)

2 - Salts  that can be compared directly, using Ksp values, to estimate solubilities for zinc hydroxide are - [tex]Mg(OH)_2[/tex] (Option a)

Explanation:

[tex]K_s_p[/tex] values can be used to compare the solubility of salts that produce ions in a 1:1 ratio.

Because the salts [tex]CaSO_3[/tex] , [tex]BaCrO_4[/tex] and [tex]CaS[/tex]  have a 1:1 ion ratio, the solubilities of options b, c, and d can be compared to salt 1.

[tex]K_s_p[/tex] Values can be used to compare the solubility of salts that produce ions in a 1:2 or 2:1 ratio.

  2. [tex]Zn(OH)_2[/tex] dissociates into ions in ratio 1:2 .

Because the ions in the salt [tex]Mg(OH)_2[/tex] are in a 1:2 ratio, the solubility of salt 2 can be compared to that of salt 'a'.

Hence , Salt 1 is matched with options b , c , d.

              Salt 2 is matched with option a.

Answer:

Mg

Explanation:

I think Mg is correct not too sure tho

Answer:

The answer would be charged particles.

Explanation:

Electric force exists as one of the most fundamental forces in the universe, it occurs between all charged particles.

Answer:

1.95cm x 1.95cm x 1.95cm

Explanation:

20.00g / 2.70g/mL = 7.41 mL = 7.41 cm^3

∛7.41 = 1.95cm

Answer:

Mg + 2 HCl ⇒ MgCl₂ + H₂

10.1 L

Explanation:

Step 1: Write the balanced equation

Mg + 2 HCl ⇒ MgCl₂ + H₂

Step 2: Calculate the moles corresponding to 10.0 g of Mg

The molar mass of Mg is 24.31 g/mol.

10.0 g × 1 mol/24.31 g = 0.411 mol

Step 3: Calculate the moles of H₂ produced from 0.411 moles of Mg

The molar ratio of Mg to H₂ is 1:1. The moles of H₂ produced are 1/1 × 0.411 mol = 0.411 mol

Step 4: Calculate the volume occupied by 0.411 moles of H₂

0.411 moles of H₂ are at 1.00 atm and 25 °C (298 K). We can calculate the volume occupied using the ideal gas equation.

P × V = n × R × T

V = n × R × T / P

V = 0.411 mol × (0.0821 atm.L/mol.K) × 298 K / 1.00 atm = 10.1 L

Answer:

Antarctic Peninsula, is one of the most important fossil sites on Earth.

hope this helps you ☺️☺️

Fossils that would be expected to be found in Antarctica from more recent times, after it had moved much closer to the South Pole is Antartica peninsula.

Fossils are the preserved remains, impression, or trace of any once-living thing from many years ago. Examples of the fossils include bones, shells, exoskeletons, stone imprints of animals or microbes, objects preserved in amber, hair, petrified wood and DNA remnants.

There are four different types of fossils-

Mold fossils

Cast fossils

Trace fossils or Ichnofossils

True form fossils

Imprints, tracks, and trails can also become fossilized and are called Trace fossils. Dinosaur footprints or worm burrows are the examples.

Living things when get decomposed from the so many years ago and become dirt and rocks are fossils.

Therefore, Fossils that would be expected to be found in Antarctica from more recent times, after it had moved much closer to the South Pole is Antartica peninsula.

Learn more about Fossils, here:

https://brainly.com/question/14988327

#SPJ3

Answer:

S = 21.92 %

F = 78.08 %

Explanation:

To find the percent composition of each element in SF6, we must find the molar mass of SF6 first.

Molar mass of SF6 = 32 + 19(6)

= 32 + 114

= 146g/mol

mass of Sulphur (S) in SF6 = 32g

mass of Fluorine (F) in SF6 = 114g

Percent composition = mass of element/molar mass of compound × 100

- % composition of S = 32/146 × 100 = 21.92%.

- % composition of F = 114/146 × 100 = 78.08%.

Answer:

A. The actual number of atoms in a molecule

Explanation:

Molecular formula is simply defined as a type of chemical formula that describes the type and number of atoms present in a single molecule of a compound.

Looking at the options, the correct answer is option A.

Answer:

a

Explanation:

Answer:

a e i o u

Explanation:

a e i o u

Answer:

O homogeneous mixture

Explanation:

When Kci is dissolved in water it becomes a solute in O homogeneous mixture

Answer:

bugging milftoon comic milftoon comic milftoon cimicd how many to summon a transgender milftoon cimicd how

Answer:6CO2/1C6H12O6

Explanation:

Answer: Resonance

Explanation:

A resonance is said to occur when an object experiences a frequency that is equal to its natural frequency.

A resonance refers to the sound that's produced by an object when the object vibrates at an identical rate as the sound waves that is coming from another object.

Therefore, the correct option is C

Answer:

Partial lunar eclipse.

Explanation:

A lunar eclipse is a cosmological event by which, in the presence of the Earth between the Sun and the Moon, the latter does not receive the light of the Sun in the totality of its visible face, with which a part (or the totality ) of her is in the dark.

Thus, if the lunar eclipse implies an absence of sunlight in the entire lunar surface, the eclipse will be total, while if the eclipse implies an absence of light only in part, the eclipse will be partial (which is the most common event).

Answer:

Carboxylic acid is an organic acid containing a carboxyl group. The simplest examples are methanoic (or formic) acid and ethanoic (or acetic) acid. It is  used in the production of polymers, biopolymers, coatings, adhesives, and pharmaceutical drugs. They also can be used as solvents, food additives, antimicrobials, and flavorings.

Explanation:

Hope that helps.

Answer:  The coefficient we should change first is for [tex]NO_{3}[/tex].

Explanation:

The given reaction equation is as follows.

[tex]Al + Ni(NO_{3})_{2} \rightarrow Al(NO_{3})_{3} + Ni[/tex]

Here, number of atoms present on reactant side are as follows.

Number of atoms present on the product side are as follows.

To balance this equation, multiply Al by 2 and [tex]NO_{3}[/tex] by 3 on reactant side. Also, multiply [tex]Al(NO_{3})_{3}[/tex] by 2 and Ni by 3 on the product side.

Hence, the equation can be rewritten as follows.

[tex]2Al + 3Ni(NO_{3})_{2} \rightarrow 2Al(NO_{3})_{3} + 3Ni[/tex]

Now, number of atoms present on reactant side are as follows.

Number of atoms present on product side are as follows.

Since, the atoms on both reactant and product side are same. Hence, it is now a balanced chemical equation.

Thus, we can conclude that the coefficient we should change first is for [tex]NO_{3}[/tex].

Answer:

A

Explanation:

A triglyceride (TG, triacylglycerol, TAG, or triacylglyceride) is an ester derived from glycerol and three fatty acids (from tri- and glyceride). Triglycerides are the main constituents of body fat in humans and other vertebrates, as well as vegetable fat.

The structure of option A shows a triglyceride.

Triglycerides are a kind of fat present in the blood. Triglycerides are the types of stored fats, which are not in use currently.

The structure of triglyceride is TRI esters containing glycerol bound to three fatty acid molecules.

Thus, the correct option is A.

Learn more about triglyceride

https://brainly.com/question/13840067

#SPJ2

Answer:

7.3125grams

Explanation:

Molarity is the measure of the molar concentration of a solution. It can be calculated using the formula as follows:

Molarity = number of moles (n) ÷ volume (V)

Based on the information given,

Molarity = 1.25 M

Volume = 100 mL = 100/1000 = 0.1 L

Molarity = n/V

1.25 = n/0.1

n = 1.25 × 0.1

n = 0.125mol

Using the below formula to calculate the mass of NaCl;

mole = mass/molar mass

Molar mass of NaCl = 23 + 35.5 = 58.5g/mol

0.125 = mass/58.5

mass = 0.125 × 58.5

mass = 7.3125 grams

Answer:

B

Explanation:

When two distinct elements are chemically combined—i.e., chemical bonds form between their atoms—the result is called a chemical compound. Most elements on Earth bond with other elements to form chemical compounds, such as sodium (Na) and Chloride (Cl), which combine to form table salt (NaCl).

MARK AS BRAINLEST!!

Answer:

The maggots had traces of this man in them and the entomologists found out who he was just by using the DNA in the maggots.

Explanation:

Answer:

She shares how there were maggots found in an empty house and found cocaine on them. By this, they knew that the maggots had been feeding off human remains.  They were then able to run more tests and find DNA that were on these maggots and they were able to discover who the victim was.

We are given:

Initial Temperature = 90°c

Final Temperature = 120°c

Heat applied(ΔH) = 500 Joules

Specific heat(c) = 0.9 Joules / g°C

Mass of Aluminium(m) = ?

Change in temperature:

ΔT = Final temp. - Inital Temp.

ΔT = 120 - 90

ΔT = 30°c

Calculating the mass:

We know the formula:

ΔH = mcΔT

replacing the values:

500 = m(0.9)(30)

500 = m(27)

m = 500/27

m = 18.52 grams

Answer: pH = 2.68

Explanation: pH = - log[H3O^+] .

 HCl reacts with water : HCl + H2O ->  Cl^- + H3O^+

So [H3O^+] = c(HCl) = 0.0021 M

pH = - log(0.0021) = 2.68