Answer:
.
Kirchhoff's circuit laws are two equalities that deal with the current and potential difference (commonly known as voltage) in the lumped element model of electrical circuits. They were first described in 1845 by German physicist Gustav Kirchhoff.[1] This generalized the work of Georg Ohm and preceded the work of James Clerk Maxwell. Widely used in electrical engineering, they are also called Kirchhoff's rules or simply Kirchhoff's laws. These laws can be applied in time and frequency domains and form the basis for network analysis.
Both of Kirchhoff's laws can be understood as corollaries of Maxwell's equations in the low-frequency limit. They are accurate for DC circuits, and for AC circuits at frequencies where the wavelengths of electromagnetic radiation are very large compared to the circuits.
I will mark you brainlist!!
How is primary succession different from secondary succession? Give an example of an event that may lead to primary succession.
Answer:
Primary Succession is defined as the type of ecological succession, which occurs or start from the barren, uninhabited and unoccupied areas, such as the newly formed pond, rock, dunes, etc., while such kind of succession, which occurs in the area where there was the existence of life previously but got abandoned due to natural disturbances like deforestation, natural calamities (flood, earthquake, tsunami), the field with no vegetation is known as Secondary Succession
Explanation:
Some examples of primary succession include the formation of a new ecosystem after a volcano, glacier outbursts, or a nuclear explosion. Some examples of secondary succession include succession after fire, harvesting, logging, or abandonment of land or the renewal after a disease outbreak
i hope this answer helps :)
As amplitude of a wave increases, the
_____ of the wave also increases.
frequency
wave speed
wavelength
energy
i think so it is frequency
A 16 lb weight stretches a spring 6 inches in equilibrium. It is attached to a damping mechanism with constant c. Find all values of c such that the free vibration of the weight has infinitely many oscillations.
Answer:
[tex]-8<c<8[/tex]
Explanation:
Given data:
Weight W = 16 lb
length l = 6/12 = 0.5 ft
hence, spring constant k = W/l = 16/0.5 = 32 lb/ft
The equation of motion of spring is
[tex]mx''+cx+kx=0\\0.5x''+cx'+32x=0[/tex]
the auxiliary equation can be written as
[tex]0.5r^2+cr+32=0\\r^2+2cr+64=0[/tex]
The discriminate of equation is
[tex]D =(2c)^2+-4(1)(64)\\=4(c^2-64)[/tex]
To get the value of the damping constant,
[tex]D<0\\4(c^2-64)<0\\c>-8, c<8\\-8<c<8[/tex]
What do all magnets have in common? Select all that apply.
magnetic domains are aligned
magnetic domains are not aligned
movement of protons creates a magnetic field
all magnets have opposite poles ( a North pole and South pole)
movement of electrons creates a magnetic field
moving electrons generate magnetic fields
Answer:
all magnets have opposite poles (north and south)
magnetic domains are aligned
moving electrons generate a magnetic filed
movement of electrons creates a magnets field
A washer is swung in a circle on a string as shown below. If the string
breaks which arrow shows the path the washer will take? *
Answer:
yabarrow
Explanation:
i think thats the name
A constant applied force Fp of 11.0 N pushes a box with a mass=7 kg a distance x=15.0 m across a level floor. The coefficient of kinetic friction between the box and the floor is .110. Assuming the box starts from the rest, what is the final velocity vf of the box at 15.0 m point? If there were no friction between the box and the floor, what applied force Fnew would give the box the same final velocity?
We have that for the Question " constant applied force Fp of 11.0 N pushes a box with a mass=7 kg a distance x=15.0 m across a level floor. The coefficient of kinetic friction between the box and the floor is .110." it can be said that
the final velocity vf is
[tex]vf=3.83m/s[/tex]
and the applied force Fnew is
[tex]F_{new}=3.43N[/tex]
From the question we are told
A constant applied force Fp of 11.0 N pushes a box with a mass=7 kg a distance x=15.0 m across a level floor. The coefficient of kinetic friction between the box and the floor is .110. Assuming the box starts from the rest, what is the final velocity vf of the box at 15.0 m point? If there were no friction between the box and the floor, what applied force F new would give the box the same final velocity?
Generally the equation for the Force is mathematically given as
F_p-\mu mg=ma
Therefore
11-0.110*7*9.8=7*a
a=0.49m/s^2
Using Newtons equation
v^2=u^2+2as
v^2=0+2*0.49*15
v=3.83m/s
Therefore
F=ma
F=0.49*7
F_{new}=3.43N
Therefore
the final velocity vf is
[tex]vf=3.83m/s[/tex]
and the applied force Fnew is
[tex]F_{new}=3.43N[/tex]
For more information on this visit
https://brainly.com/question/23379286
1.Mention two uses of the concave mirror.
1.Discuss the theory of the two methods of determining focal length (f).
Answer:
1. telescope
2.
[tex]f = \frac{r}{2} [/tex]
[tex]f = \frac{r}{2} [/tex]f- focal length
[tex]f = \frac{r}{2} [/tex]f- focal length r- the radius of curvature of the mirror
[tex] \frac{1}{f} = \frac{1}{p} + \frac{1}{l} [/tex]
p-the distance of the object from the vertex of the mirror
l-the distance of the figure from the vertex of the mirror
According to Newton’s second law of motion, weight depends on an object’s mass and the net force acting on the object. True or false
Answer:
true..
Explanation:
Newton's 2nd law of motion is greater the mass of an object the more force it will take to accelerate the object
According to Newton’s second law of motion, weight depends on an object’s mass and the net force acting on the object. The given statement is true.
What is force?Force is defined as the push or pull applied to the body. Sometimes it is used to change the shape, size, and direction of the body.
The following equation help to understand the statement;
Force is defined as the product of mass and acceleration. Its unit is Newton.
F=ma
F=mg
W=mg
The weight of an item is determined by its mass and the net force exerted on it, according to Newton's second rule of motion. The provided assertion is correct.
Hence,the given statement is true.
To learn more about the force, refer to the link;
https://brainly.com/question/26115859
#SPJ2
what Sport is similar to Ulama
The statement "if I raise the temperature of
a cup of water, then an increased amount of
sugar will be dissolved" is an example of
A. an observation
B. a hypothesis.
C. a theory
Look for factors that will help you determine what type of economy exists in Country C. What type of economy does Country C have? developed developing transitioning command
Answer:
C.) transitioning
Explanation:
Look for factors that will help you determine what type of economy exists in Country C is a transitioning economy.
What is economy transition?The transition economy or economy in transition is an economy that is changing from centrally planned to free market. These submit to Liberalism, where market forces are prices, rather than a centrally planned organization.
For these reasons we can say that the economy of country C is a transition economy.
See more about economy at brainly.com/question/2421251
#SPJ2
what is the main cause of the seasons
What are the features of nanotechnology?
Answer:
Characteristics of Nanotechnology
Explanation:
Nanotechnology deals with putting things together atom by atom and with structures so small they are invisible to the naked eye. It provides the ability to create materials, devices and systems with fundamentally new functions and properties
Consider the two-slit interference experiment. Electromagnetic radiation passes through the two slits that are a distance 0.0287 mm apart. The path to the fourth-order bright fringe on the nearby screen forms an angle with the horizontal. What is the wavelength of the light?
409 nm
164 nm
570 nm
655 nm
Explanation:
Consider the two-slit Interference experiment. Electromagnetic radiation passes through the two slits that are a distance 0.0287 mm apart. The path to the fourth-order bright fringe on the nearby screen forms an angle with the horizontal. What is the wavelength of the light? (1 point) O 655 nm O 570 nm O 164 nm O 409 nm
COMPANY
a piece of clay with mass m is traveling with an unknown velocity in the positive x-direction, when it collides and sticks to a block of mass 3m, moving with velocity v=-3m/s. after the collision, the block and clay are stuck together and traveling with a velocity of 1 m/s in the negative x-direction. what was the original velocity of the clay mass?
Answer:
13 m in the + x direction.
Explanation:
Givens
m1 = m
m2 = 3m
v1= ? = x
v2 = - 3 m/s
v3 = v4 = - 1 m/s
Equation
Let x be the speed of the lighter object before collision.
Momentum before collision = momentum after collision
Solution
mx - 3m * 3m/s = (m1 + m2)*(-1)
m(x - 3*3m/s) = (m + 3m)(-1)
m(x - 9) = - 4m Cancel the ms
x - 9 = 4 Add 9 to both sides
x = 9 + 4
x = 13 m/s
A boy weighs 50 kg and is running with 225 J of energy, what is his velocity?
All of the following are characteristics of a laser diode except
Answer:
D
Explanation:
Given that all of the following are characteristics of a laser diode except
Solution.
A laser diode emit light of a single colour. That is, it emits a monochromatic light in which the light emitted monochromatically will definitely be coherent. That is, a light with a single wavelength emitted by a wide wavelength.
Also, all diode have positive and negative junction which is known as pn junction.
The incorrect among all the options is option D which is the answer.
what is motion wave?
Answer:
Wave motion is the transfer of energy and momentum from one point of the medium to another point of the medium without actual transport of matter between two pointsxplanation:
A small car is traveling at a speed of 60 mph on the highway. In the next lane, a large passenger bus is traveling at the same speed.
Answer:
A. The bus has more kinetic energy than the car.
Explanation:
As we know that
Kinetic energy is the amount of energy possessed by the body at the time when it is in motion.
Also,
Kinetic energy = 1 ÷ 2mv²
Here m denotes the mass of the body
and v denotes the velocity of the body.
So it would be based on the mass & velocity of the body
As if the passenger bus contains more kinetic energy as compared to the car because of the big mass
Hence, the first option is correct
1:
This diagram shows four different dishes on the kitchen shelf.
tea cup
IN
2:
bowl
50 N
mug
10 N
plate
SON
3:
999
4
:
Which of these dishes has the least potential energy?
bowl
5:
plate
mug
6:
tea cup
Answer:
Bowl will have maximum potential energy
Explanation:
It is the bowl that will have maximum potential energy.
It is because potential energy is high when both height and mass of the object is high.
Here in this case the bowl has maximum weight with maximum height except the tea cup but the potential weight of cup will not make much impact as its weight is very low.
What is the impulse required to stop a 4.8 kg mass traveling at 18.9 m/s?
Report your answer to 1 decimal place.
Answer:
MASS=4.8KG
VELOCITY= 18.9
Put into the formula.
Explanation:
Impulse= Mass* change in velocity, it gives you everything you need to input it into the formula
PLEASE ILL GIVE BRAINLIST Which term describes the high point of a transverse wave?
O A. Crest
O B. Compression
O C. Rarefaction
O D. Trough
Answer:
I belive that the answer is the A
Crest describes the high point of a transverse wave. Therefore, the correct option is option A.
Transverse waves are those which oscillate in directions that are opposite to the wave's forward motion. Electromagnetic radiation, seismic waves, or water surface ripples are all examples of transverse waves.
A simple transverse wave can be represented by a sine or cosine curve because any point's amplitude—that are, its distance from the axis—is proportional to the sine (or cosine) associated with that angle. Crest describes the high point of a transverse wave.
Therefore, the correct option is option A.
To know more about transverse wave, here:
https://brainly.com/question/13863548
#SPJ7
What does the transfer of energy have to do with natural disasters?
Answer: When an earthquake occurs energy is transferred, from where the rocks break, and travels throughout the world. The bigger the quake the further from the epicentre the waves will travel. There are four types of earthquake wave generated during an earth quake
Explanation:
The intensity of a natural disaster can be determined by the amount of energy transferred due to it.
What is meant by natural disaster ?Natural disasters include calamities with atmospheric, geological, and hydrological causes (such as droughts, earthquakes, floods, hurricanes, and landslides), which can result in fatalities, property damage, and social and environmental disturbance.
Here,
Internal and external forces work together to create natural disasters. The first is internal forces that are caused by the earth's internal heat energy and result in geologic hazards including earthquakes, volcanoes, and tsunamis.
Energy is transferred during an earthquake and propagates throughout the globe from the point at which the rocks split. The waves' distance from the epicenter increases with the size of the earthquake.
During an earthquake, four different kinds of seismic waves are produced. They transfer energy out of the earthquake's epicentre.
Hence,
The intensity of a natural disaster can be determined by the amount of energy transferred due to it.
To learn more about natural disaster, click:
https://brainly.com/question/31874791
#SPJ2
equivalent resistance:
What is the equivalent resistance between points P & Q?
(None of the resistors are the same and the wires are without resistors.)
Answer:
equivalent register what is the equivalent resistance between points P and Q no knows registers are the same and the virus faila
Which of the following describes the relationship between the velocity and
pressure of a fluid?
A. Pascal's principle
B. Archimedes' principle
C. Bernoulli's principle
D. Flow rate equation
Answer is c
Explanation:
I think its a option pascal's principal
Answer:
c
Explanation:
Just took the quiz
A car starts from rest and reaches a speed of 25m/s in 4 seconds. What is the acceleration?
Also, Calculate the distance the object traveled,
Can y’all help me with this one
Answer:
a = 6.25 m/s/s
d = 50 m
Explanation:
Given:
v1 (initial velocity)= 0 m/s (cz its at rest)
v2 (final velocity)= 25 m/s
t = 4s
a = ?
d = ?
to determine acceleration
a = (v2 - v1)/ t
= (25m/s - 0m/s)/4s
= 6.25 m/s/s
to determine distance traveled
d = 1/2(v1 + v2)t
=1/2(0m/s+25m/s)(4s)
=50 m
Answer:
Answer in explanation.
Explanation:
Using Equation
[tex]v = u + at[/tex]
where v is the final velocity
u is initial velocity
a is acceleration
t is time taken
given u = 0, v = 25, t = 4,
[tex]25 = 0 + 4a \\ 4a = 25 \\ a = 6.25 \frac{m}{ {s}^{2} } [/tex]
Now, using equation
[tex]v {}^{2} = {u}^{2} + 2as[/tex]
where v and u remains the same, a = 6.25 and s is the distance,
[tex](25) {}^{2} = \: {0}^{2} + 2(6.25)s \\ 12.5s = 625 \\ s = \frac{625}{12.5} \\ s = 50m[/tex]
Explain what happens to the path of light as it hits a piece of black paper, a glass mirror, and a glass
of water. Explain why the light behaves the way it does as it hits each object.
1. Light is _________ by the black paper.
2. Light is _________ by the mirror.
3. Light is _________ by the glass of water.
mc2
Describe the process of nuclear fission and how the famous equation E
relates to this process.
frfyuegffffjhAnswer:
frjhgfjgresjytgfejygfjse
Explanation:
Why can’t human males be carriers for sex linked (x-linked) disorders?
Answer:
This is because the X chromosome is large and contains many more genes than the smaller Y chromosome. In a sex-linked disease, it is usually males who are affected because they have a single copy of X chromosome that carries the mutation.
Explanation:
A 2.60 kg lion runs at a speed of 5.00 m/s until he sees his prey. The lion then speeds up 8.00 m/s to catch it. How much work did do after he speeds up?
Answer: 50.7 J
Explanation:
Given
mass of lion is [tex]m=2.6\ kg[/tex]
The initial speed of the lion is [tex]v_1=5\ m/s[/tex]
increased speed of lion is [tex]v_2=8\ m/s[/tex]
Initially, its kinetic energy is [tex]K_1=\frac{1}{2}mv_1^2[/tex]
Final kinetic energy [tex]k_2=\frac{1}{2}mv_2^2[/tex]
work did by lion after speed up is [tex]k_2-k_1[/tex]
[tex]\Rightarrow W=\dfrac{1}{2}\times 2.6[8^2-5^2]\\\\\Rightarrow W=1.3\times [39]=50.7\ J[/tex]