What is defined as the plants and animals and the physical surroundings, including the sun, air, soil, and water?

Answer:

uff mere dil ma ture kali chadiya ha uff tumi apne buni ha

Answer:

Cations (positively-charged ions) and anions (negatively-charged ions) are formed when a metal loses electrons, and a nonmetal gains those electrons. ... And all of them form an anion with a single negative charge.

Answer:

90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on eight comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love you.!Explanation:

Ammonia acts as a weak base in aqueous solution. Water is the acid that reacts with this base when ammonia is dissolved in water.

According to the Arrhenius concept, base is defined as a substance which yields hydroxyl ions on dissociation.These ions react with the hydrogen ions of acids to produce salt in an acid-base reaction.

Bases have a pH higher than seven as they yield hydroxyl ions on dissociation.They are soapy in touch and have a bitter taste.According to the Lowry-Bronsted concept, base is defined as a substance which accepts protons .Base react violently with acids to produce salts .Aqueous solutions of bases can be used to conduct electricity .They can also be used as indicators in acid-base titrations.

They are used in the manufacture of soaps,paper, bleaching powder.Calcium hydroxide ,a base is used to clean sulfur dioxide gas while magnesium hydroxide can be used as an antacid to cure acidity.

Learn more about base,here:

https://brainly.com/question/12445440

#SPJ6

Answer:

pH≈1.35

Explanation:

-log(0.045)≈1.35

Answer:

i dont get it???????

Explanation:

Answer:

D - metals conduct heat

Explanation:

3. the element is oxygen

Answer:

20.02 grams of chalk.

Explanation:

Answer:

Bottle Nose Dolphin ummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

Explanation:

pH, pOH, [H+], and [OH-] are all interrelated. For simplicity, we assume that we're working with aqueous solutions at 25 °C.

The following mathematical relations are relevant here:

A pH of 7 is neutral; a pH less than 7 is acidic; and a pH greater than 7 is basic.

---

We are given four solutions of varying [H⁺], and we want to find the pH and the [OH⁻]. The pH will tell us whether the solution is neutral, an acid, or a base.

Using the relationship [H⁺] × [OH⁻] = 10^-14, we can calculate the [OH⁻] of each solution by dividing 10^-14 by the given [H⁺]:

[OH⁻] = 10^-14/(3.3 × 10^-5) = 3.0 × 10^-10

[OH⁻] = 10^-14/(4.0 × 10^-8) = 2.5 × 10^-7

[OH⁻] = 10^-14/(7.2 × 10^-11) = 1.4 × 10^-4

[OH⁻] = 10^-14/(8.2 × 10^-4) = 1.2 × 10^-11

Note: While not indicated here, the units for [H⁺] and [OH⁻] are moles/liter (M).

To find the pH of each solution, we take the negative logarithm of the [H⁺] with base 10, i.e., pH = -log₁₀[H⁺]:

pH = -log(3.3 × 10^-5) = 4.48

pH = -log(4.0 × 10^-8) = 7.40

pH = -log(7.2 × 10^-11) = 10.14

pH = -log(8.2 × 10^-4) = 3.09

Note that, for significant figures involving logarithms, the number of decimal places should equal the number of significant figures in the argument of our logarithm (the argument is what we're taking the -log of). Since we're taking the -log of quantities given to two significant figures, our corresponding pH values are given to two decimal places.

As mentioned above, a pH = 7 is neutral, a pH < 7 is acidic, and a pH > 7 is basic.

4.48 < 7, so the first solution is an acid.

7.40 > 7, so the second solution is a base.

10.14 > 7, so the third solution is a base.

3.09 < 7, so the fourth solution is an acid.

Answer:

i just had a test on this with 2 attempts and got it wrong on both but i do know that the answer is not...

the steepness of the models hillside

or

the rate of erosion on the hills

so the answer is either...

the amount of water sprayed on the hills

or

the type of material used to construct the model hills

but i think its the amount of water sprayed on the hills...i hope i helped a lil ;)

Explanation:

Answer:

Correct

Explanation:

According to the balanced chemical reaction, 2 mol FeBr3 are consumed for every 3 mol Na2S consumed.

A balanced equation obey the law of conservation of mass. The coefficients are the numbers which are added to balance the chemical equation. Here the given mole ratio is correct.

An equation in which the number of atoms of reactants and products on both sides of the equation are balanced is defined as the balanced chemical equation. The coefficients which are added in front of the formula of each component represents the number of the species.

A molar ratio denotes the ratio between the amounts in moles of any two compounds involved in a balanced chemical reaction. By comparing the coefficient of each component, the mole ratio can be determined.

Here for the given reaction, for every 3 moles of Na₂S consumption 2 moles of FeBr₃ is also consumed. So the molar ratio of Na₂S to FeBr₃ is 2/3. Molar ratios are used as the conversion factors between products and reactants in many chemistry problems.

To know more about mole ratio, visit;

https://brainly.com/question/29095152

#SPJ7

Answer:

1.8066e+24 is the answer

Answer:

coeffeicent!

Explanation:

this balances equations and also changes the amount of a compound/element present

Answer: The respiratory system

Explanation: It includes the nose, mouth, throat, voice box, windpipe, and lungs. Air enters the respiratory system through the nose or the mouth.

Answer:

Same i guess hdjekfhkshfjfkr

The resultant volume of the carbon dioxide gas which is produced by the combustion of butane is 14.4L.

Moles of any gas will be calculated by using the ideal gas equation as:

PV = nRT, where according to qustion for butane gas

P = pressure = 1.20 atm

V = volume = 2.50L

n = moles = ?

R = universal gas constant = 0.082 L.atm / K.mol

T = temperature = 22 degree celsius = 295.15 K

On putting values we get

n = (1.20)(2.50) / (0.082)(295.15) = 0.124 moles

Given chemical equation is:

C₄H₁₀ + 13/2O₂ → 4CO₂ + 5H₂O

From the stoichiometry of the reaction, it is clear that,

1 mole of C₄H₁₀ = produces 4 moles of CO₂

0.124 mole of C₄H₁₀ = produces 4×0.124=0.496 moles of CO₂

Now we calculate the volume for the carbon dioxide gas at the given pressure and temperature as:

V = (0.496)(0.082)(295.15) / (1.20) = 14.4 L

Hence required volume of CO₂ is 14.4 L.

To know more about ideal gas equation, visit the below link:

https://brainly.com/question/24236411

#SPJ2

Answer:

323 K

Explanation:

To convert Celcius to kelvin first you need to remember this equation:

C + 273 = K (K = kelvin and C = celsius)

Next, you substitute with what you have given:

50 + 273 = K

Solve the equation by adding 50 and 273

k = 323

Answer:

50 moles

Explanation:

took the quiz

Answer:

e. 327/227

Explanation:

This is the correct standard pressure.

Answer:

uh oh stinky uh oh stinky

Answer:

1.) protons or electrons 2.) ion

Explanation:

Answer:

200 lb•ft/s

Explanation:

From the question given above, the following data were obtained:

Force (F) = 2 tons

Time (t) = 5 mins

Height (h) = 15 ft

Power (P) =?

Next, we shall convert 2 tons to pound. This can be obtained as follow:

1 ton = 2000 lb

Therefore,

2 tons = 2 × 2000

2 tons = 4000 lb

Next, we shall convert 5 mins to seconds. This can be obtained as follow:

1 min = 60 s

Therefore,

5 mins = 5 × 60

5 mins = 300 s

Finally, we shall determine the power of the pump. This can be obtained as follow:

Force (F) = 4000 lb

Time (t) = 300 s

Height (h) = 15 ft

Power (P) =?

P = F × h / t

P = 4000 × 15 / 300

P = 60000 / 300

P = 200 lb•ft/s

Thus, the power of the pump is 200 lb•ft/s

Answer:

It's 200 ft-lb/sec

Explanation:

I did it before!

Answer:

b

Explanation:

Answer:

B) 4,1,2,3

Explanation:

Did it on USA Test prep. :)

Answer:

D. passing an electric current through water to form hydrogen and oxygen

Explanation:

only one that's not just a physical change.