What is baking soda chemically known as ? Excessive use of chemical
fertilizer is not good. Justify.​

When the concentration of the HCl is varied, the color of the solution is changed as the equilibrium position moves to the left or right.

The term equilibrium in a chemical reaction connotes that the forward and the revers reactions proceed at the same rate. Let us note that Co(H2O)6^2+ is pink in color while  CoCl4^2– is blue in color.

As such, when the concentration of the HCl is varied, the color of the solution is changed as the equilibrium position moves to the left or right.

Learn more anout equilibrium: https://brainly.com/question/365923

We know that [OH⁻] * [H⁺] = 10⁻¹⁴

plugging the value of [H⁺]

[OH⁻] * 1.2 * 10⁻³ = 10⁻¹⁴

[OH⁻] = 10⁻¹⁴ * (10³/1.2)

[OH⁻] = 833.3 * 10⁻¹⁴

[OH⁻] = 8.33 * 10⁻¹²

Two airplanes are flying in the sky in such a way that the gravitational attractions between them decreases. The planes must be flying away from each other. Hence option A is correct.

Gravitational attraction is defined as a basic interaction that pulls everything with mass or energy in the same direction. All objects are subject to gravitational interactions, the strength of which is directly inversely proportional to the product of their masses. The size of an object and the separation between the objects have an impact on gravity.

In order to reduce the gravitational pull, two planes are flying in the sky. There must be a directionality between the aircraft. No matter what is in between the two bodies, there will still be gravitational pull. As a result, even if the medium between the two bodies changed, the gravitational force between them would not.

Thus, two airplanes are flying in the sky in such a way that the gravitational attractions between them decreases. The planes must be flying away from each other. Hence option A is correct.

To learn more about gravitational attraction, refer to the link below:

https://brainly.com/question/19822389

#SPJ2

Answer:

I think:

CH3COCH2CH2CH3 belongs to ketone because it has a carbonyl group C=O in its structure.

Answer:17.65 or 18 L

Explanation:

Answer:

The correct answer is 1.21 L.

Explanation:

Based on the given information, the reaction will be,

CS2 (l) + 3Cl2 (g) ⇒ CCl4 (l) + S2Cl2 (l)

By using the standard values of the substances, the standard enthalpy of the reaction is,

ΔH° = [(-139.5) + (-58.5) – 0 – (87.3)] kJ/mol

= -285.3 kJ/mol

The amount of heat evolved for 3 moles of chlorine reacted us 285.3 kJ.

Now the number of moles of chlorine needed to react to produce 5.00 kJ is,

= 5.00 kJ × 3 mol Cl2/285.3 kJ

= 0.0526 mol Cl2

Now the volume of chlorine gas at 27degree C and 812 mmHg will be,

Volume = 0.0526 mol Cl2 × 0.0821 Latm/mol K × 300 K/ 1.07 atm

= 1.21 L

According to Le cha telier's principle when we increase the pressure of a equilibrium reaction the reaction shift to the side where few moles of gas present.

Your reaction (Notice - I guess the reaction you written is wrong, but still I'm solving with your given prediction)

3NaI (g) + H2 (g) = 2NaHI (g)

Where access of sodium iodide is reacting with Hydrogen gas to form NaHI molecule.

Number of moles of gas on reaction side - 3+2 = 5 moles

Number of moles of gas on product side - 2 moles

Conclusion- the reaction will shift to the right of the reaction

According to Le cha telier's principle when we increase the pressure of a equilibrium reaction the reaction shift to the side where few moles of gas present.

Your reaction (Notice - I guess the reaction you written is wrong, but still I'm solving with your given prediction)

3NaI (g) + H2 (g) = 2NaHI (g)

Where access of sodium iodide is reacting with Hydrogen gas to form NaHI molecule.

Number of moles of gas on reaction side - 3+2 = 5 moles

Number of moles of gas on product side - 2 moles

Conclusion- the reaction will shift to the right of the reaction

Answer:

0.616 moles of Fe₂(CO₃)₃ are produced when 200 g of FeCl₃ react

b. 1.

Explanation:

The balanced reaction is:

First we convert 200 grams of FeCl₃ into moles, using its molar mass:

Then we convert 1.23 moles of FeCl₃ into moles of Fe₂(CO₃)₃, using the stoichiometric coefficients of the balanced reaction:

The closest answer would be option b. 1.

Explanation:

[tex]FeCl₃ + (NH₄)₂CO₃ → NH₄Cl + Fe₂(CO₃)₃[/tex]

first balance the chemical equation

[tex]2FeCl₃ + 3(NH₄)₂CO₃ → 6NH₄Cl + Fe₂(CO₃)₃[/tex]

2 mole. 3 mole. 6mole. 1mole

2*162g of FeCl₃ produce 236 g of Fe₂(CO₃)₃

200g of of FeCl₃

produce 236/(2*162)*20=145.68 g of Fe₂(CO₃)₃

1 mole of Fe₂(CO₃)₃=236g

145.68g of Fe₂(CO₃)=1/236*145.68=}0.61mole

closest answer is b 1

b.1mole(s) of iron (III) carbonate [Fe2CO3)3] is/are produced in the balanced equation

Answer:

a. 0.4539g benozic acid

b. 60.29% of benzoic acid in the solid sample

Explanation:

The benzoic acid reacts with NaOH as follows:

C6H5COOH + NaOH → C6H5COONa + H2O

Where 1 mole of the acid reacts per mole of NaOH

The NaCl doesn't react with NaOH

To solve this question we must find the moles of NaOH added = Moles of benzoic acid. With the moles of the acid and its molar mass (C6H5COOH = 122.12g/mol) we can find the mass of the acid and its mass percentage:

a. Moles NaOH = Moles Benzoic acid:

24.78mL = 0.02478L * (0.150mol / L) = 0.003717 moles Benozic acid

Mass benzoic acid:

0.003717 moles Benozic acid * (122.12g / mol) = 0.4539g benozic acid

b. Mass percentage is:

0.4539g / 0.7529g * 100 = 60.29% of benzoic acid in the solid sample

Answer:

1.53 atm

Explanation:

From the question given above, the following data were obtained:

Volume = constant

Initial pressure (P₁) = stp = 1 atm

Initial temperature (T₁) = 273 K

Final temperature (T₂) = 144 °C = 144 °C + 273 = 417 K

Final pressure (P₂) =?

Since the volume is constant, the final pressure can be obtained as follow:

P₁ / T₁ = P₂ / T₂

1 / 273 = P₂ / 417

Cross multiply

273 × P₂ = 417

Divide both side by 273

P₂ = 417 / 273

P₂ = 1.53 atm

Therefore, the final pressure (i.e the pressure inside the hot water bottle) is 1.53 atm.

Answer:

XeF4                  True

[PdCl4]2−           True

naphthalene      True

Furan                  False

C4H4O               False  

Explanation:

From the given information:

Only XeF4;  [PdCl4]2−;  naphthalene are true. This is because their molecules contain -nC₂ axis which is perpendicular to the Cn axis. The image attached below shows the structural formula of each compound, there below, we can see that Furan only possesses one C₂ axis but not -nC₂ ⊥ C₂.

Answer:

HNO3 is a potent acid, a base, a nitrating agent and a heavy oxidising agent at times. In the presence of a stronger acid, it serves as a base.

Explanation:

Answer:

It is a strong acid

Explanation:

Answer:

571.81 mL

Explanation:

Assuming constant pressure, we can solve this problem by using Charles' law, which states that at constant pressure:

Where in this case:

We input the data:

And solve for V₂:

The new volume would be 571.81 mL.

Answer:first part is A and C, second part is C, third part is 40 m/s and the fourth part is zero

Explanation: I guessed and got them right lol

Answer:

TRUE ,hope it helped you

Explanation:

Answer: The half-reactions represents reduction are as follows.

Explanation:

A half-reaction where addition of electrons take place or a reaction where decrease in oxidation state of an element  takes place is called reduction-half reaction.

For example, the oxidation state of Cr in [tex]Cr_{2}O^{2-}_{7}[/tex] is +6 which is getting converted into +3, that is, decrease in oxidation state is taking place as follows.

[tex]Cr_{2}O^{2-}_{7} + 3 e^{-} \rightarrow Cr^{3+}[/tex]

Similarly, oxidation state of Mn in [tex]MnO^{-}_{4}[/tex] is +7 which is getting converted into +2, that is, decrease in oxidation state is taking place as follows.

[tex]MnO^{2-}_{4} + 5 e^{-} \rightarrow Mn^{2+}[/tex]

Thus, we can conclude that half-reactions represents reduction are as follows.

Answer:

1) donate an H+ ion

Explanation:

option 1 is correct

Answer:

Mars and Orbital code saber and the alien

Answer:

Option A, The pH of the solution is 2.7 and the solution is acidic

Explanation:

As we know,

pH =  - log [H3O+]

Substituting the given values, we get

pH =  - log [2.1 x 10-3 M]

pH =  - (-2.678)

pH = 2.678 or 2.7

The solution is acidic as pH value is less than 7

Hence, option A is correct

The heat capacity of the metal is calculated using the formula:

What is temperature?

The temperature of a substance is the degree of hotness or coldness of that substance.

Temperature difference between substances enables heat flow.

Heat flows from hot to cold bodies.

In the given experiment, to determine the heat capacity of a metal, the temperature difference is obtained by substracting the initial and final temperatures.

The heat capacity of the metal is then calculated using the formula:

Learn more about heat capacity at: https://brainly.com/question/21406849

#SPJ1

Answer:

The right approach is "80 g".

Explanation:

Given:

[tex]L_f=80 \ Cal/g[/tex]

[tex]L_v=540 \ Cal/g[/tex]

[tex]S=1 \ Cal/g[/tex]

Now,

The amount of heat cooling will be:

= [tex]mL_v+mS \Delta T[/tex]

= [tex](10\times 540)+10\times 1\times (100-0)[/tex]

= [tex]5400+1000[/tex]

= [tex]6400 \ Cal[/tex]

then,

⇒ [tex]m_{ice} L_f=6400[/tex]

[tex]m_{ice}\times 80=6400[/tex]

        [tex]m_{ice}=\frac{6400}{80}[/tex]

                [tex]=80 \ g[/tex]            

Answer:

2 moles!

Explanation:

Hi i hope this helped! I researched it and 2 moles was what came up first.

Answer: The volume of given container is 3.83 L.

Explanation:

Given: Mass of [tex]H_{2}[/tex] = 0.224 g

Mass of [tex]N_{2}[/tex] = 1.06 g

Mass of Ar = 0.834 g

Since, moles is the mass of a substance divided by its molar mass. Therefore, moles of given substances present in the mixture are as follows.

Moles of  [tex]H_{2}[/tex] are:

[tex]Moles = \frac{mass}{molar mass}\\= \frac{0.224 g}{2 g/mol}\\= 0.112 mol[/tex]

Moles of [tex]N_{2}[/tex] are:

[tex]Moles = \frac{mass}{molar mass}\\= \frac{1.06 g}{28 g/mol}\\= 0.038 mol[/tex]

Moles of Ar are:

[tex]Moles = \frac{mass}{molar mass}\\= \frac{0.834 g}{40 g/mol}\\= 0.021 mol[/tex]

Total moles = (0.112 + 0.038 + 0.021) mol = 0.171 mol

Now, using ideal gas equation the volume is calculated as follows.

PV = nRT

where,

P = pressure

V = volume

n = no. of moles

R = gas constant = 0.0821 L atm/mol K

T = temperature

Substitute the values into above formula as follows.

[tex]V = \frac{nRT}{P}\\= \frac{0.171 mol \times 0.0821 L atm/mol K \times 273 K}{1 atm}\\= 3.83 L[/tex]

Thus, we can conclude that the volume of given container is 3.83 L.

Today, as part of the series of posts on soils, we are going to look at ‘soil texture’. Soil forms the basis for all life but it’s important to know about its mineral constitution as well as its biological profile.

Texture refers to the ‘feel’ of the soil. This is affected by the constituent materials found within it, specifically sand, silt and clay particles. A coarse sand will feel gritty but a wet clay will feel heavy and sticky. The texture of a soil has a direct impact on the way the soil reacts to certain environmental conditions – for example, towards drought or heavy rain (with sandy soils more freely draining).

There is a big difference in the size of the different particles.

Coarse sand = diameter 2-0.2mm

Fine sand = diameter 0.2-0.02mm

Silt = diameter 0.02-0.002mm

Clay = diameter less than 0.002mm

Note how the clay particles are much smaller than the sand particles – this is important as it means the total surface area of a clay soil is much greater and so the capacity to hold water is also much greater.

Between the sand, silt and clay particles there are lots of pores. In fact a soil as a whole is generally 45% mineral, 5% organic matter (depending on the soil) and 50% pore space through which air and water can pass.

Sand –

Made up of weathered primary rock minerals.

The particles are irregular in outline.

They are large and so do not pack together easily.

Large pore spaces in between.

Air gets in very easily and water flows rapidly through it.

Silt –

Answer:

The molecular formula of the compound is C10H16O.

Explanation:

Based on the given information, the mass of an unknown compound is 152 mg or 0.152 g, which was dissolved to produce 75 ml of solution.

The osmotic pressure of the solution is 0.328 atm at 27 degrees C or 300 K.

The formula of osmotic pressure is,

P = CRT

Now putting the values in the formula we get,

0.328 = C*0.0821*300

C = 0.013317

C = (mass/molecular mass) * (1000/volume of solution in ml)

0.013317 = (0.152/Molecular mass) * (1000/75)

Molecular mass = 152.186

C mass = 152.186 * 0.789 = 120.07 grams

C mole = 120.07/12 = 10

H mass = 152.186 * 0.1059 = 16.11 grams

H mole = 16.11/1 = 16

O mass = 152.186 - 120.07 - 16.116 = 16 grams

O mole = 16/16 = 1

Thus, the molecular formula of the compound will be,

C10H16O

Answer:

The answer is "the electron configuration of the element".

Explanation:

Electronics are distributed in atomic and molecular orbit via electrons from an atom or a molecule.

It reflects a most frequent dependence on valence electrons in the outer.

Through analyzing the context of the regular periodic table, the individual atoms are helpful. That's also important to understand chemical connections, which hold electrons together. This similar approach helps to explain the specific characteristics of lasers or semiconductors for bulk materials.

AAnswer:

Explanation:

ladoooooooooioooooioiiioooo

Explanation:

The self-ionization of water (also autoionization of water, and autodissociation of water) is an ionization reaction in pure water or in an aqueous solution, in which a water molecule, H2O, deprotonates (loses the nucleus of one of its hydrogen atoms) to become a hydroxide ion, OH−. The hydrogen nucleus, H+, immediately protonates another water molecule to form hydronium, H3O+. It is an example of autoprotolysis, and exemplifies the amphoteric nature of water

Animation of the self-ionization of water

Chemically pure water has an electrical conductivity of 0.055 μS/cm. According to the theories of Svante Arrhenius, this must be due to the presence of ions. The ions are produced by the water self-ionization reaction, which applies to pure water and any aqueous solution:

H2O + H2O ⇌ H3O+ + OH−

Expressed with chemical activities a, instead of concentrations, the thermodynamic equilibrium constant for the water ionization reaction is:

{\displaystyle K_{\rm {eq}}={\frac {a_{\rm {H_{3}O^{+}}}\cdot a_{\rm {OH^{-}}}}{a_{\rm {H_{2}O}}^{2}}}}

which is numerically equal to the more traditional thermodynamic equilibrium constant written as:

{\displaystyle K_{\rm {eq}}={\frac {a_{\rm {H^{+}}}\cdot a_{\rm {OH^{-}}}}{a_{\rm {H_{2}O}}}}}

under the assumption that the sum of the chemical potentials of H+ and H3O+ is formally equal to twice the chemical potential of H2O at the same temperature and pressure.[1]

Because most acid–base solutions are typically very dilute, the activity of water is generally approximated as being equal to unity, which allows the ionic product of water to be expressed as:[2]

{\displaystyle K_{\rm {eq}}\approx a_{\rm {H_{3}O^{+}}}\cdot a_{\rm {OH^{-}}}}

In dilute aqueous solutions, the activities of solutes (dissolved species such as ions) are approximately equal to their concentrations. Thus, the ionization constant, dissociation constant, self-ionization constant, water ion-product constant or ionic product of water, symbolized by Kw, may be given by:

{\displaystyle K_{\rm {w}}=[{\rm {H_{3}O^{+}}}][{\rm {OH^{-}}}]}

where [H3O+] is the molarity (≈ molar concentration)[3] of hydrogen or hydronium ion, and [OH−] is the concentration of hydroxide ion. When the equilibrium constant is written as a product of concentrations (as opposed to activities) it is necessary to make corrections to the value of {\displaystyle K_{\rm {w}}} depending on ionic strength and other factors (see below).[4]

At 25 °C and zero ionic strength, Kw is equal to 1.0×10−14. Note that as with all equilibrium constants, the result is dimensionless because the concentration is in fact a concentration relative to the standard state, which for H+ and OH− are both defined to be 1 molal (or nearly 1 molar). For many practical purposes, the molal (mol solute/kg water) and molar (mol solute/L solution) concentrations can be considered as nearly equal at ambient temperature and pressure if the solution density remains close to one (i.e., sufficiently diluted solutions and negligible effect of temperature changes). The main advantage of the molal concentration unit (mol/kg water) is to result in stable and robust concentration values which are independent of the solution density and volume changes (density depending on the water salinity (ionic strength), temperature and pressure); therefore, molality is the preferred unit used in thermodynamic calculations or in precise or less-usual conditions, e.g., for seawater with a density significantly different from that of pure water,[3] or at elevated temperatures, like those prevailing in thermal power plants.

We can also define pKw {\displaystyle \equiv } −log10 Kw (which is approximately 14 at 25 °C). This is analogous to the notations pH and pKa for an acid dissociation constant, where the symbol p denotes a cologarithm. The logarithmic form of the equilibrium constant equation is pKw = pH + pOH.