Answer:
Matter
Explanation:
It has mass and it takes up space
A 2.0 L flask contains nitrogen and oxygen gases at 25°C. The total pressure is 0.91 atm and contains 0.050 mol of nitrogen. Calculate the partial pressure of oxygen and moles of oxygen present
Answer:
.025 ml 02
Explanation:
I made a pdf and pasted it in and etc
6. The fusion of 4 H-1 nuclei to produce two positrons and one other nuclei.
Explanation:
Normally, fusion involves two heavy hydrogen nuclides but since we have 4 light hydrogen nuclides, two of which underwent positron emission, thus changing two protons into neutrons plus 2 positrons and 2 neutrinos. The resulting nucleus from this fusion reaction is an He-4 nucleus.
1.How many moles of each element are in 0.0250 mol of K 2 Cr O 4? 2. How many moles of ammonium ions are in 4.50 mol of (N H 4 ) 2 CO 3 ? With all the process to see where you get the answers please
Answer:
1. 0.0500 moles K, 0.0250 moles Cr and 0.1000 moles O.
2. 9.00 moles ammonium ions are present.
Explanation:
1. In 1mol of K2CrO4 there are 2 moles of K, 1 mole of Cr and 4 moles of O.
The moles in 0.0250 moles K2CrO4 are:
0.0250mol * 2 = 0.0500 moles K
0.0250mol * 1 = 0.0250 moles Cr
0.0250mol * 4 = 0.1000 moles O
2. In 1 mole of (NH4)2CO3 there are 2 moles of ammonium ions, NH₄⁺.
In 4,50 moles are:
4.50 moles * 2 = 9.00 moles ammonium ions are present
5F248+ 2NH3(8) ► NF418 + 6HF
a) If you start with 3.6 g of NH, and excess F2, how many liters of HF at STP can you make?
Answer:
14.2L at STP
Explanation:
Based on the problem, 2 moles of NH3 produce 6 moles of HF. To solve this question we have to convert the mass of NH3 to moles. With the chemical equation find the moles of HF and using PV = nRT find the liters of HF:
Moles NH3 -Molar mass: 17.031g/mol-
3.6g NH3 * (1mol / 17.031g) = 0.211 moles NH3
Moles HF:
0.211 moles NH3 * (6mol HF / 2mol NH3) = 0.634 moles HF
Volume HF
PV = nRT; V = nRT/P
Where V is volume in liters, n are moles of the gas = 0.634 moles, R is gas constant = 0.082atmL/molK, T is absolute temperature = 273.15K at STP and P is pressure = 1atm at STP.
Replacing:
V = 0.634moles*0.082atmL/molK*273.15K / 1atm
V = 14.2L at STP
2CO +0, 200, what is the mole ratio of carbon monoxide to carbon
dioxide
A 1.2
B 2.2
C 2:1
D 3:1
Answer:
B. 2.2
Explanation:
The carbon dioxide is released when limestone is heated during the
production of _____?
Carbon dioxide is released when limestone is heated during the production of [tex]\sf\purple{cement}[/tex]. ✔
[tex]\circ \: \: { \underline{ \boxed{ \sf{ \color{green}{Happy\:learning.}}}}}∘[/tex]
what are the best topics to write a project work on EVS and Chemistry
Answer:
It is better to do chemistry
Explanation:
So that you will learn more of chemicals
A student performed the following reaction in his Chemistry class: Zn + 2HCl ---> ZnCl2+H2. He started with 32.70 g of Zn metal and 18.23 g HCl and got 60.1 g of of ZnCl2.
(I) How much ZnC12 should he have produced?
(II) What was his percentage yield?
(III) If the 32.70 g of Zinc that he started with contained impurities (materials other than Zinc), will this support the student's percentage yield?
Explain briefly.
Answer:
(I) [tex] m_{ZnCl_{2}} = 34.07 g [/tex]
(II) [tex] \% y = 176.4 \% [/tex]
(III) The presence of impurities in the 32.70 g of zinc will support the student's percentage yield.
Explanation:
The reaction is:
Zn + 2HCl → ZnCl₂ + H₂
(I) To find the number of moles of ZnCl₂ we need to calculate the number of moles of the reactants.
[tex] n_{Zn} = \frac{m}{A} [/tex]
Where:
m: is the mass
A: is the standard atomic weight
[tex] n_{Zn} = \frac{32.70 g}{65.38 g/mol} = 0.50 moles [/tex]
[tex] n_{HCl} = \frac{18.23 g}{36.458 g/mol} = 0.50 moles [/tex]
If 1 mol of Zn reacts with 2 moles of HCl, the number of moles of Zn needed to react with 0.50 moles of HCl is:
[tex] n_{Zn} = \frac{1 mol Zn}{2 moles HCl}*0.50 moles HCl = 0.25 moles [/tex]
Then, the limiting reactant is HCl. Now, we can find the number of moles of ZnCl₂ by knowing that 2 moles of HCl produce 1 mol of ZnCl₂.
[tex] n_{ZnCl_{2}} = \frac{1 mol ZnCl_{2}}{2 moles HCl}*0.50 moles = 0.25 moles [/tex]
Finally, the mass of ZnCl₂ that he has produced is:
[tex] m_{ZnCl_{2}} = n_{ZnCl_{2}}*M = 0.25 moles*136.286 g/mol = 34.07 g [/tex]
(II) The percentage yield can be found with the following equation:
[tex] \% y = \frac{m_{e}}{m_{t}} \times 100 [/tex]
Where:
[tex] m_{e}[/tex]: is the experimental mass = 60.1 g
[tex] m_{t}[/tex]: is the theoretical mass = 34.07 g
Hence, the percentage yield is:
[tex] \% y = \frac{60.1 g}{34.07 g} \times 100 = 176.4 \% [/tex]
(III) The presence of impurities in zinc will explain why the percentage yield is greater than 100% because the mass of the impurities will make the mass of zinc bigger than its mass without impurities. If there were no impurities in the zinc, its mass would be smaller and thus the percent yield.
I hope it helps you!
which of the follwing is false ? A . the mass of proton is heavier than electron . B . protons and electron are found in nucleus C . Nucleus is very small but massive D . Neutrons are neutral particles
Answer:
C
Explanation:
The nucleus is very dense
Suggest whether potassium metal can be used to react with an acid to prepare a soluble salt. Explain your answer.
Yes, potassium metal can be used to react with an acid to prepare a soluble salt.
Acids react with metals to yield the corresponding metal salt and hydrogen gas.
One of the properties of metals is their ability to react with dilute acids to yield a soluble salt and hydrogen gas. This is a common reaction for all metals that are above hydrogen in the activity series.
Potassium can react with a hypothetical acid HB as follows;
2K(s) + 2HB(aq) ------> 2KB(aq) + H2(g)
https://brainly.com/question/6136372
Imagine you had HCl with a concentration of exactly 0.10 mol/dm3. If 0.023 dm3 of a sodium hydroxide solution, NaOH (aq), could exactly neutralize 0.040 dm3 of the HCl solution, what is the concentration of the NaOH (aq)
Answer:
Explanation:
Step 1: Calculate the amount of sodium hydroxide in moles
Volume of sodium hydroxide solution = 25.0 ÷ 1,000 = 0.0250 dm3
Rearrange:
Concentration in mol/dm3 =
Amount of solutein mol = concentration in mol/dm3 × volume in dm3
Amount of sodium hydroxide = 0.100 × 0.0250
= 0.00250 mol
Step 2: Find the amount of hydrochloric acid in moles
The balanced equation is: NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)
So the mole ratio NaOH:HCl is 1:1
Therefore 0.00250 mol of NaOH reacts with 0.00250 mol of HCl
Step 3: Calculate the concentration of hydrochloric acid in mol/dm3
Volume of hydrochloric acid = 20.00 ÷ 1000 = 0.0200 dm3
Concentration in mol/dm3 =
Concentration in mol/dm3 =
= 0.125 mol/dm3
Step 4: Calculate the concentration of hydrochloric acid in g/dm3
Relative formula mass of HCl = 1 + 35.5 = 36.5
Mass = relative formula mass × amount
Mass of HCl = 36.5 × 0.125
= 4.56 g
So concentration = 4.56 g/dm3
The volume of a gas decreases to half of its original volume, but the gas maintains the same number of moles and temperature. According to the ideal gas law, what will most likely happen to the pressure
3. A PS6 plugged into a 120 V outlet uses 3 Amps. What is the Resistance rating of
the power cord?
voltage: V=
current: 1 =
resistance: R=
V=IxR
1=VR R
Underline/Bold Which Equation we are going to use:
= V
Plug in the numbers from above and solve for our answer:
Answer:
R = 40 ohms
Explanation:
Given that,
The voltage of outlet, V = 120 V
Current flowing through the device, I = 3 A
We need to find the Resistance rating of the power cord. Let the resistance is R. We know that,
Ohm's law, V = IR
Put all the values,
[tex]R=\dfrac{V}{I}\\\\R=\dfrac{120}{3}\\\\R=40\ \Omega[/tex]
So, the resistance rating of the power cord is equal to 40 ohms.
How would the intensity of light from the bulb change if you were to: a) Dissolve some additional CuSO4(s) in the CuSO4 solution?
Answer:
The intensity of the light bulb increases
Explanation:
The conductivity of a solution depends on the concentration of ions in solution. This implies that, if the concentration of ions in solution is increased, the conductivity of the solution increases accordingly.
If we add more CuSO4(s) to the CuSO4 solution, the concentration of ions in the solution and consequently the conductivity of the solution increases.
Therefore, the intensity of the light bulb increases.
Calculate the mass of an object that has a density of 3.52g/cm^3 and
a volume of 5000 cm^3. Note that Mass = Volume X Density
Answer:
17.6kg
Explanation:
mass = Volume × Density
mass = 5000cm^3 × 3.52g/cm^3
mass = 17600g = 17.6kg
Can someone help me pleaseee
Answer:
D.
Explanation:
Answer
0°C
Explanation:
substance be formed in it's solid state
True or False all non - metal elements are gassed at room temperature.
Answer:
false
Explanation:
you have bromine , its a non metal and liquid in room temperature
The boat shown in the photo below is moving along at a constant 20 miles per hour. Is the boat accelerating? Question 3 options: A. No because it is not speeding up B. Yes because it is changing direction C. No because it is not slowing down D. Yes because the velocity is staying constant
Answer:
A
Explanation:
If its going at a constant speed it will not accelarate wich means to speed up.
Which statement best describes what makes a base weak? A base is weak when it forms few ions in water. A base is weak when only a little of it is dissolved in water. A base is weak when its concentration is high. A base is weak when it totally forms ions in water.
Answer:
A base is weak when only a little of it is dissolved in water
Explanation:
Answer: B.) A base is weak when only a little of it is dissolved in water
Hope this helps :)
define restivity and conductivity?
Answer:
Electrical resistivity is a property of a material that tells you how much it resists the flow of electric current, while conductivity quantifies how easily current flows.
match these items. three-dimensional bonding, hardest natural substance, used as lubricant, nonconductor, weak planar bonds, carbon black or soot
Answer:
1. three-dimensional bonding
Diamond
2. Hardest natural substance
diamond
3. Used as lubricant
Graphite
4. nonconductor
Diamond
5. Weak, planar bonds
Graphite
6.Carbon black or soot
Amorphous
Explanation;
sorry im late, hopefully this can help somebody :)
2CO +02 2CO2 what is the mole ratio of carbon monoxide to carbon
dioxide
A 1.2
B 2.2
C 2:1
D 3:1
Answer:
B 2:2
Explanation:
Mole ratio is the comparison of the ratio of two compounds or elements in a chemical reaction. In a balanced equation, the moles of a particular compound or element is written as a coefficient. This means that mole ratio is the ratio of the coefficient of two substances in a reaction.
In this balanced chemical equation given as follows:
2CO + 02 → 2CO2
The number of moles/coefficient of carbon monoxide (CO) is 2 while that of carbon dioxide (CO2) is 2.
Hence, the mole ratio of CO to CO2 is 2:2
When H forms a bond with H2O to form the hydronium ion H3O , this bond is called a coordinate covalent bond because
Answer:
both bonding electrons come from the oxygen atom
Explanation:
A coordinate covalent bond is said to be formed when an electron pair is donated into a empty orbital of an atom from a filled orbital of another atom.
In this type of covalent bond, the shared electron pair is furnished by only one of the bonding species.
The bonding between H^+ and H2O to form H3O^+ involves donation of a lone pair of electrons on oxygen into the empty 1s orbital of H^+ hence the two bonding electrons come from oxygen. This is why the bond is called a coordinate covalent bond.
The primary function of a chloroplast is to -
F . Convert food into energy a cell can use
G . Control the function of a cell and control genetic traits
H . Convert radiant energy into chemical energy through photosynthesis
J . Store water and nutrients
Please help!!!
Which of the following questions would assist a student to differentiate between Earth’s major biomes?
A. Does the biome receive high levels of precipitation?
B. Does the biome consist of more plants than animals?
C. Does the biome consist of biotic and abiotic factors?
D. Does the biome consist of organisms with adaptations for survival in the biome?
Answer:
a
Explanation:
does the blome receive high levels of precipitation
Answer:
A.Does the biome receive high levels of precipitation?
Explanation:
Can someone please help with these questions!! I would really appreciate it
Answer: water
Explanation: those elements all react to water , so the answer would be water . :)
The ionization energies required to remove successive electrons from one mole of calcium atoms are 590 kJ/mol, 1145 kJ/mol, 4912 kJ/mol, and 6474 kJ/mol. The most common ion of calcium is probably
Answer:
Ca^2+
Explanation:
As we know, more energy is required to remove an electron from a positively charged ion than is required to remove an electron from a neutral atom. Hence, the second ionization energy of calcium is greater than its first ionization energy.
However, the third and fourth ionization energies of calcium are much higher than the second ionization energy because they involve removal of electrons from an inner filed shell. This process requires a lot of energy and is often not feasible.
Hence, the most common ion of calcium must be Ca^2+ where only two electrons are removed from calcium.
5.) If 6 moles of Oxygen Gas (O2) are produced in the reaction below, how
many grams of Potassium Chloride (KCI) are also produced? *
2 KCIO3 → 2 KCI + 3 O2
Answer:
im really sorry but i dont no☹
The chemical equation below shows the burning of magnesium (Mg) with oxygen (O2) to form magnesium oxide
(Mgo)
2Mg + O2 → 2Mgo
The molar mass of Oz is 32.0 g/mol. What mass, in grams, of Oz is required to react completely with 4.00 mol of Mg?
2.00
64.0
128
256
Answer:
64
Explanation:
B
Please hurry Which of the following statements is true?
• A positively charged atom has more electrons than protons.
• A positively charged atom has more protons than neutrons.
• A positively charged atom has more neutrons than protons.
• A positively charged atom has no electrons.
• A positively charged atom has more protons than electrons.
Answer:
E, answer 5, A positively charged atom has more protons than electrons.
Explanation: