what happens when a force is applied in the direction of motion of a body​

Explanation:

The three importance of measurement are as follows :-

Hope it is helpful to you

✌️✌️✌️✌️✌️✌️✌️

Explanation:

this is it. hope u understand

Answer:

7. 20,000,000 mL.

8. 8,000 m.

9. 120,000 secs.

10. 4

Explanation:

7. Determination of the volume in millilitres (mL)

Volume in litre (L) = 20,000 L

Volume in millilitres (mL) =..?

The volume in mL can be obtained as follow:

1 L = 1,000 mL

Therefore,

20,000 L = 20,000 x 1,000 = 20,000,000 mL.

Therefore, 20,000 L is equivalent to 20,000,000 mL.

8. Determination of the distance in metre (m)

Distance in mile = 5 mile

Distance in metre =?

First, we shall convert from mile to kilometre.

This can be done as follow:

1 mile = 1.6 km

Therefore,

5 mile = 5 x 1.6 = 8 km

Finally, we shall convert 8 km to metre (m).

This is illustrated below:

1 km = 1,000 m

Therefore,

8 km = 8 x 1,000 = 8,000 m

Therefore, 5 miles is equivalent to 8,000 m.

9. Determination of the time in seconds.

Time = 400 minutes for 5 days.

First, we shall convert 400 mins to hour.

This is illustrated below:

60 minutes = 1 hour

Therefore,

400 mins = 400/60 = 20/3 hours

The time (hours) is 20/3 hours in 1 day.

Therefore, the time (hours) in 5 days will be = 20/3 x 5 = 100/3 hours.

Next, we shall convert 100/3 hours to minutes.

This is illustrated below:

1 hour = 60 minutes

Therefore,

100/3 hours = 100/3 x 60 = 2000 mins

Finally, we shall convert 2000 mins to seconds.

This is illustrated below:

1 mins = 60 secs

2000 mins = 2000 x 60 = 120,000 secs.

Therefore, the time is 120,000 secs.

10. Determination of the number of significant figures.

To obtain the significant figures of a number, we simply count all the numbers available.

Therefore, the number of significant figures for 9876 is 4.

Answer:

[tex]1.5 * 10^6[/tex]

Explanation:

Given

Digit: 1,500,000

Required

Represent using scientific notation

We start by expressing the given digit as a product of 1.5 and a multiple of 10

[tex]Digit = 1.5 * 1,000,000[/tex]

1,000,000 can be represented as 10⁶

So; the digit becomes

[tex]Digit = 1.5 * 10^6[/tex]

Hence, the scientific notation of 1,500,000 is 1.5 * 10⁶

Answer:

V = 17.2

Explanation:

Speed = distance(m) / time(s)

= 55m / 3.2s

=17.2 m/s

Answer:

0.75

Explanation:

[tex]refractive \: index \: = \frac{3.0 \times {10}^{2} }{2.0 \times {10}^{2} } [/tex]

= 1.5

[tex]refractive \: index = \frac{ \sin(angle \: of \: incidence) }{ \sin(angle \: of \: refraction) } [/tex]

[tex]1.5 = \ \frac{ \sin(i) }{ \sin(30) } [/tex]

1.5 × ½ = sin(i)

[tex] \sin(i) = 0.75[/tex]

Answer:

its velocity, wavelength and frequency all change

Explanation:

Whenever a wave crosses the boundary between two media of different densities, its velocity, frequency and wavelength changes. This appears as a bending of the wave as it crosses the boundary from one medium to another.

Refraction is a fundamental property of waves. Hence when light is travelling from air into water, it wavelength, speed and frequency all changes at the interface between the two media.

Answer:

2

yes

Explanation:

been submitted to the Theme 20 participants will be there was a lot of fun and I will be there at Home

Answer:

here I am just giving an idea of how the graph will be like ...

In the pic..

Hope it helped u if yes mark me BRAINLIEST!

Tysm!

:)

Answer:

3.75m

Explanation:

area under graph

5+2.5=7.5

7.5/2=3.75

3.75x0.5=1.875

1.875x2=3.75m

Answer:

Because there is no net force acting o an object in equilibrium.

Explanation:

When object is in equilibrium (either at rest or moving with constant velocity, the net force acting o it is zero.A vector can only have zero magnitude fall of its components are zero this means that all forces acting on the object are balanced.

Answer:

The area of the sheet of metal = 4.255 m²

The volume of the sheet of metal = 0.08553 m³

Explanation:

The area of a rectangle is given by the following relation;

Area, A = Length × Breadth

Therefore, the area of the rectangular sheet of metal, A[tex]_m[/tex], is given as follows;

A[tex]_m[/tex]  = 4.234 m × 1.005 m = 4.255 m²

The area of the sheet of metal = 4.255 m²

The volume of the metal sheet id given by the relation, volume V[tex]_m[/tex]= area × Thickness

The thickness of the sheet of metal = 2.01 cm = 0.0201 m

Therefore,

V[tex]_m[/tex] = 4.255 m × 0.0201 m = 0.08553 m³

The volume of the sheet of metal = 0.08553 m³.

Answer:

Are yarr mei bhi Indian hu.....

Explanation:

Tumse milkar accha laga

Answer:

See explanation below for Newton's third law of "action generates reaction" for this example

Explanation:

From Newton's third law: "For every action there is an equal and opposite reaction."

Frisbee is pulling on the leash with force F which is felt by Dylan as a tension force in the leash trying to pull his arm out of its socket, and Frisbee feels an equal and opposite tension force from the leash chocking him.

Answer:

Explanation:

Take note that when the fuel of the rocket is consumed, the acceleration would be zero. However, at this phase the rocket would still be moving up until all the forces of gravity would dominate and change the direction of the rocket. Hence, there will be a need to calculate two distances, one from the ground until the point where the fuel is consumed and from that point to the point where the gravity would change the direction.

Given:

a = 76.8 m/s^2

t = 1.99 s

Solution:

d = vi (t) + 0.5 (a) (t^2)

d = (0) (1.99) + 0.5 (76.8) (1.99)^2

d = 0+38.4×3.9601

d = 152.068m

vf = vi + at

vf = 0 + 76.8 (1.99)

vf = 152.83 m/s (velocity when the fuel is consumed completely)

Then, we calculate the time it takes until it reaches the maximum height.

vf = vi + at

0 = 152.83+(-9.8) (t)

0 = 152.83 + (-9.8) (t)

-152.83 = -9.8t

t = 152.83/9.8 s

t = 15.59s

Then, the second distance

d= vi (t) + 0.5 (a) (t^2)

d = 152.83 (15.59) + 0.5 (-9.8) (15.59^2)

d = 2382.6197- 1190.93

d = 1191.68m

Then, we determine the maximum altitude:

d1 + d2 = 152.068 m + 1191.68m = 1343.748m

7351.35Hz

f0= v-Vo/v-Vs × FSA

= 340-0 /340+30 ×8000

= 340/370× 8000

= 7351.35hz

Answer:

Hay diversas leyes que podemos usar acá.

Acá sabemos que la vejiga aumenta su tamaño al reducir la presión, esto tiene sentido, pues al haber menos presión, hay menos fuerza que comprime la vejiga, lo que le permite aumentar su volumen.

Acá tenemos una relación inversa de la forma: V = K/P

Una relación inversa donde la presión esta en el denominador y K es un termino que no depende ni del volumen ni de la presión.

Entonces, a medida que aumenta P, el denominador aumenta, por lo que el valor del volumen decrece.

Un ejemplo de una ecuación similar es la del gas ideal, por ejemplo, para un gas ideal dentro de un globo de volumen V para una dada presión P:

V = nRT/P

donde n es el numero de moles, R es la constante termodinámica y T es la temperatura, acá podemos ver que esta ecuación tiene la misma forma fundamental que la escrita arriba.

Answer: Some of the ways to control noise pollution are as follows: (1) Control at Receiver's End (2) Suppression of Noise at Source (3) Acoustic Zoning (4) Sound Insulation at Construction Stages (5) Planting of Trees (6) Legislative Measures.

Answer:

You have to:

a) Improve your insulation.

b) Install a fence

c) Use modern Acoustic wall panels

d) Plant trees

e) Reduce electronic volumes,e.t.c.

Explanation:

okay.

Answer:

The emf of a cell is the sum of the electric potential differences (PDs) produced by a separation of charges (electrons or ions) that can occur at each phase boundary (or interface) in the cell. The magnitude of each PD depends on the chemical nature of the two contacting phases.

Explanation:

pls mark brainliest

Answer:

a)0.51°

b)1.47×10^-4m

Explanation:

a)for a single slit experiment, the minima that has an angle of θ towards the centre needs to satisfy the expression below.

bsin(θ)= mλ.........................(*)

Where b= width of the slit

The distance on the screen from Central angle can be expressed as

Sin(θ)= y/d............. (**)

d and y is the horizontal distance between slit and screen

If we input eqn(**) into equation (*) we have

y= mλd/b................(z)

In order to find angle (θ) we have

(θ)= sin-(1.99×10^-2)/2.25

= 0.51°

Therefore, angle of diffraction θ of the second minimum is 0.51°

b)to find the width of the sloth using eqn(z) by substitute the values, we have

b= (2)(649×10^-9)(2.25)/1.99×10^-2

b= 1.47×10^-4m

Therefore, the width of the slit is 1.47×10^-4m

Answer:

Positive

Explanation:

In an endothermic reaction, the products are at a higher energy than the reactants. This means that the enthalpy change of the reaction (∆H) is positive

Answer:

a. can be applied only to sound waves.

c. occurs when the frequency of sound waves received is lower if the wave source is moving toward you than if it's moving away

d. occurs when the pitch of a sound gets lower if the source is receding.

Explanation:

[tex].[/tex]

Answer:

distance between should be 1.25 × 10^6 m

Explanation:

Force is proportional to separation distance.

[tex]250 \: newtons = 2.5 \times {10}^{6} \: metres \\ ( \frac{1}{2} \times 250) \: newtons = d \\ \\ d = \frac{125 \times 2.5 \times {10}^{6} }{250} \\ d = 1.25 \times {10}^{6} \: metres[/tex]

Answer:

distance between should be 1.25×10^6.

Explanation:

force Is proportional to separation .

mrk above answer branilest .

Answer

#1. number of valence electrons

#2. oxygen

#3. Rubidium has more protons and more electrons than calcium.

#4. 20

#5. helium (he)

Explanation:

Answer:

Rubidium has more protons and more electrons than calcium.

Explanation:

for connexus honors chemistry unit 3 lesson 3 quick check :)

Answer:

The momentum of an object is equal to the product of its mass and its velocity.

Explanation:

Consider an object of mass [tex]m[/tex] travelling at a velocity [tex]\vec{v}[/tex]. The momentum [tex]\vec{p}[/tex] of this object would be:

[tex]\vec{p} = m \cdot \vec{v}[/tex].

For the law of conservation of momentum, consider two objects: object [tex]\rm a[/tex] and object [tex]\rm b[/tex]. Assume that these two objects collided with each other.

The sum of the momentum of the two objects would be:

Assume that the system of these two objects is isolated. By the law of conservation of momentum, the sum of the momentum of these two objects should be the same before and after the collision. That is:

[tex]m_{\rm a}\cdot \vec{v}_{\rm a}(\text{initial}) + m_{\rm b}\cdot \vec{v}_{\rm b}(\text{initial}) = m_{\rm a}\cdot \vec{v}_{\rm a}(\text{final}) + m_{\rm b}\cdot \vec{v}_{\rm b}(\text{final})[/tex].

Answer:

1. Tienes 1 kg de fruta.

2. Queda por recorrer 1/4 km.

3. Ambos pesan lo mismo.

Explanation:

1. Tienes 1/2 kg y cuando te doy 1/4 te queda:

[tex] m = \frac{1}{2} - \frac{1}{4} = \frac{1}{4} [/tex]

Ahora cuando te doy 3/4 kg te queda en total:

[tex] m_{T} = \frac{1}{4} + \frac{3}{4} = 1 kg [/tex]

Por lo tanto, tienes 1 kg de fruta al final.

2. Si falta por recorrer la mitad de la mitad, tenemos:

[tex] d = \frac{1/2}{2} = \frac{1}{4} [/tex]

Entonces, queda por recorrer 1/4 km.

3. El peso (P) del hierro es:

[tex] P = m*g [/tex]    

[tex] P = (1 + 1/2)kg*9.81 m/s^{2} = 14.72 N [/tex]

Y el peso de la paja es:

[tex] P = 3/2 kg*9.81 m/s^{2} = 14.72 N [/tex]

Por lo tanto, ambos pesan lo mismo.

Espero que te sea de utilidad!

Answer: The frequency increases as the pitch increases, and the amplitude increases as the volume increases

Explanation:

Waves have the property of:

v = f*λ

where v is the speed of the wave (which is almost constant for soundwaves, v = 340 m/s)

f is the frequency of the wave, and λ is the wavelength.

Now, we know that when the pitch of a note increases, also does the frequency of the soundwave (so the wave oscillates faster).

Now, we also want to include the amplitude of the soundwave in this.

The amplitude is related to the volume of the soundwave (actually is related to the energy, and as higher is the energy, more "loud" is the sound).

As the high pitch part is usually "louder", we can assume that we have an amplitude increase.

Then the answer would be:

"The frequency increases as the pitch increases, and the amplitude increases as the volume increases"

Answer:

/

Explanation:

Answer:

b) in atmostphere

Explanation:

I made lots of research and it should be b.

a. On a particular day, atmospheric pressure is 730 mm of mercury In pascals 97392.2896252, b. On a particular day, atmospheric pressure is 730 mm of mercury in atmospheres 0.960526316 atm, c. on a particular day, atmospheric pressure is 730 mm of mercury in millibars 973.70355547 mb.

a) To convert atmospheric pressure from mm of mercury to pascals, we can use the conversion factor: 1 mm Hg = 133.322387415 pascals.

Pressure in pascals = 730 mm Hg * 133.322387415 = 97392.2896252 pascals.

b) To convert atmospheric pressure from mm of mercury to atmospheres, we can use the conversion factor: 1 atm = 760 mm Hg.

Pressure in atmospheres = 730 mm Hg / 760 = 0.960526316 atm.

c) Atmospheric pressure is often expressed in millibars (mb), where 1 atmosphere is approximately equal to 1013.25 millibars.

Pressure in millibars = 0.960526316 atm * 1013.25 mb/atm = 973.70355547 mb.

Atmospheric pressure is the force exerted by the weight of air molecules in the Earth's atmosphere. It can be measured in various units, including millimeters of mercury, pascals, atmospheres, and millibars.

Converting between these units involves using conversion factors based on established relationships between them.

In this case, the provided pressure of 730 mm Hg was converted to pascals, atmospheres, and millibars using the appropriate conversion factors.

Conversions help express pressure measurements in units that are more suitable for different contexts or calculations.

Know more about atmospheric pressure:

https://brainly.com/question/28310375

#SPJ3

Answer:

The angular acceleration α = 14.7 rad/s²

Explanation:

The torque on the rod τ = Iα where I = moment of inertia of rod = mL²/12 where m =mass of rod  and L = length of rod = 4.00 m. α = angular acceleration of rod

Also, τ = Wr where W = weight of rod = mg and r = center of mass of rod = L/2.

So Iα = Wr

Substituting the value of the variables, we have

mL²α/12 = mgL/2

Simplifying by dividing through by mL, we have

mL²α/12mL = mgL/2mL

Lα/12 = g/2

multiplying both sides by 12, we have

Lα/12 × 12 = g/2 × 12

αL = 6g

α = 6g/L

α = 6 × 9.8 m/s² ÷ 4.00 m

α = 58.8 m/s² ÷ 4.00 m

α = 14.7 rad/s²

So, the angular acceleration α = 14.7 rad/s²

Lets do

[tex]\boxed{\sf P=\dfrac{m}{v}}[/tex]

[tex]\\ \sf\longmapsto Density=\dfrac{Mass}{Volume}[/tex]

[tex]\\ \sf\longmapsto Mass=Density\times volume[/tex]

[tex]\\ \sf\longmapsto Volume=\dfrac{Mass}{Density}[/tex]