Answer:
When a liquid releases enough energy, the liquid will freeze and turn into a solid. Phase changes are what causes one state of matter to turn into another. ... Phase changes occur because of changes in the amount of kinetic energy obtained by the particles that make up a substance. Kinetic energy is the energy of movement.
Explanation:
Please help!!
I don’t understand
Answer:
[tex]= 3.105x10^{24}molecules\ acetone[/tex]
Explanation:
Hello!
In this case, given the volume of acetone, it is possible to compute the mass and next the moles via its molar mass (58.08 g/mol) as shown below:
[tex]n_{acetone}=380mL*\frac{0.788g}{1mL} *\frac{1mol}{58.08 g} \\\\n_{acetone}=5.16mol[/tex]
Then, via the Avogadro's number it is possible to compute the acetone molecules as follows:
[tex]=5.16mol*\frac{6.022x10^{23}molecules}{1mol}\\\\= 3.105x10^{24}molecules\ acetone[/tex]
Best regards!
during the rock cycle___ follows erosin
Answer:
i dont get it
Explanation:
Answer:
deposition
Explanation:
CH3CH3C(CH3)2CH2I classification and name
Answer:
1,2 di methyl 5 ene tri chloro hexane
5. A reaction in which them material that starts the reaction is also one of the products and can start another reaction is called
a. An accelerator reaction
b. A moderator reaction
c. A shielding reaction
d. A chain reaction
Answer:
chain reaction
Explanation:
A chain reaction is a sequence of reactions where a reactive product or by-product causes additional reactions to take place.
Surface tension is a force that affects....
A. Gases
B. Plasmas
C. Solids
D. Liquids
Answer:
option A iis the right answer
The density of copper is a...
a. chemical property
c. chemical change
b. physical property
d. physical change
Answer:
B. physical property is the answer
A continuously stirred tank reactor is designed to remove the hazardous waste compound trichloroethylene (TCE) from industrial wastewater. The tank is 3250 liters. The wastewater flows into the tank at 200 L/min with a TCE concentration of 25 mg/L. The reactor decays TCE at a reaction rate of 0.20 min-1 . What is the steady-state concentration of TCE in the treated water leaving the reactor
Answer:
the steady-state concentration of TCE in the treated water leaving the reactor is 5.88 mg/L
Explanation:
Given that;
Tank volume v = 3250 liters
wastewater flows into the tank Q = 200 L/min
TCE concentration Co= 25 mg/L
reactor decays TCE at a reaction rate K = 0.20 min-1
mass balance
we know that;
Accumulation = inflow - outflow ± generation
⇒dc/dt = QCo - Qc ± rc.V
now at a steady state; dc/dt = 0
so
0 = QCo - Qc + rcV
where rc = -kc
0 = QCo - Qc - kcV
Qc + kcV = QCo
c(Q + kV) = QCo
c = QCo / (Q + kV)
so we substitute
c = (200 × 25) / (200 + (0.2×3250))
c = 5000 / 850
c = 5.88 mg/L
Therefore, the steady-state concentration of TCE in the treated water leaving the reactor is 5.88 mg/L
Calculate the number of Li atoms in 7.8 mol of Li.
Express your answer using two significant figures.
4.7 × 10²⁴ atoms Li
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Avogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
7.8 mol Li
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
Set up: [tex]\displaystyle 7.8 \ mol \ Li(\frac{6.022 \cdot 10^{23} \ atoms \ Li}{1 \ mol \ Li})[/tex]Multiply/Divide: [tex]\displaystyle 4.69716 \cdot 10^{24} \ atoms \ Li[/tex]Step 4: Check
We are told to round to 2 sig figs. Follow sig fig rules and round.
4.69716 × 10²⁴ atoms Li ≈ 4.7 × 10²⁴ atoms Li
GG x Gg
what percent of Offspring will be homeozgous recessive?
HELPP!!!!! WILL GIVE BRAINLIEST AND 50 POINT'S IN ORDER FOR AN OBJECT MOVING AT 10m/s TO HAVE KENITIC ENERGYOF 1800 JOULS THE OBJECT MUST HAVE A MASS IN THE RANGE OF-
A.0-10
B.10-20
C.20-30
D.30-40
Answer:
D. 30-40 kg.
good luck, i hope this helps :)
^and this, it’s due in like 10 minutes so please help;)
Answer:
a radiation of the sun
Explanation:
After going through a guided tutorial by selecting Run Grams Demonstration, you can create your own experiment by clicking the Run Experiment button at the end or by clicking the Overview tab and returning to the Experiment tab to select Run Experiment. There are nine reactions you can explore on your own. Sulfur dioxide gas (SO2) and oxygen gas (O2) react to form the liquid product of sulfur trioxide (SO3). How much SO2 would you need to completely react with 6.00 g of O2 such that all reactants could be consumed
Answer: Thus 24.0 g of [tex]SO_2[/tex] would be needed.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} O_2=\frac{6.00g}{32g/mol}=0.1875moles[/tex]
[tex]2SO_2(g)+O_2(g)\rightarrow 2SO_3(l)[/tex]
According to stoichiometry :
1 mole of [tex]O_2[/tex] require = 2 moles of [tex]SO_2[/tex]
Thus 0.1875 moles of [tex]O_2[/tex] will require=[tex]\frac{2}{1}\times 0.1875=0.375moles[/tex] of [tex]SO_2[/tex]
Mass of [tex]SO_2=moles\times {\text {Molar mass}}=0.375moles\times 64g/mol=24.0g[/tex]
Thus 24.0 g of [tex]SO_2[/tex] would be needed to completely react with 6.00 g of [tex]O_2[/tex] such that all reactants could be consumed.
5. A reaction in which them material that starts the reaction is also one of the products and can start another reaction is called
a. An accelerator reaction
b. A moderator reaction
c. A shielding reaction
d. A chain reaction
Answer:
D it's called a chain reaction
A bullet seized from a crime scene has a composition of lead 11.6 g, tin 0.5 g, and
antimony 0.4 g. What is the percentage of lead in the bullet? Express your answers to
the ones place.
Answer:
92.8%
Explanation:
Step 1: Given data
Mass of lead in the bullet (mPb): 11.6 gMass of tin in the bullet (mSn): 0.5 gMass of antimony in the bullet (mSb): 0.4 gStep 2: Calculate the total mass of the bullet
The total mass of the bullet is equal to the sum of the masses of the elements that form it.
m = mPb + mSn + mSb = 11.6 g + 0.5 g + 0.4 g = 12.5 g
Step 3: Calculate the mass percentage of Pb in the bullet
We will use the following expression.
%Pb = mPb / m × 100%
%Pb = 11.6 g / 12.5 g × 100% = 92.8%
Can someone please rephrase this question, I dont understand what it is asking for.
Which disease might have cures developed as a result of their understanding of structure and function of protein?
Answer:
Which infection may have fixes created because of their comprehension of construction and capacity of protein?
Match the following elements with their symbols.
1.mercury Ag
2.silver He
3.gold Al
4.aluminum Fe
5.iron Hg
6.helium Ca
7.calcium Au
8.magnesium Mg
9.nickel Ni
Match the following elements with their symbols.
[tex] \sf 1.\: mercury \: \: \: \: \: \: \: \: \: Ag (2)\\ \sf 2.\: silver \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: He (6) \\ \sf 3.\: gold \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: Al (4) \\ \sf 4.\: aluminum \: \: \: \: \: \: \: Fe (5) \\ \sf 5.\: iron \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: Hg (1)\\ \sf 6.\: helium \: \: \: \: \: \: \: \: \: \: \: \: Ca (7) \\ \sf 7.\: calcium \: \: \: \: \: \: \: \: \: \: Au (3)\\ \sf 8.\: magnesium \: \: \: Mg(8) \\ \sf 9.\: nickel \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: Ni(9) \\ [/tex]
_____________________________
Symbol of Mercury is Hg.Symbol of Silver is Ag.Symbol of gold is Au.Symbol of Aluminium is Al.Symbol of Iron is Fe.Symbol of Helium is He.Symbol of Calcium is Ca.Symbol of Magnesium is Mg.Symbol of Nickel is Ni.3. You can express the density of an object in units of kg/L or in units of
g/mL. How is the density of an object in kg/L related to its density in g/mL?
46) How many inches are in 25.8 cm?
A) 0.10
B) 28.3
C) 0.0984
D) 10.2
E) none of the above
Answer:
10.15748 so it is none of the above
Explanation:
I just know
Just like cans of soup, atoms of the same element often have different masses. These different varieties are called isotopes. In the Average Atomic Mass Gizmo, you will learn how to find the average mass of an element using an instrument called a mass s
Answer:
ions are deflected and the lighter the ions the more the deflection.
Placing magnetic field in the path of the ions cause them to move in a curved path.
Explanation:
This question is all about the way in which mass spectroscopy works. Mass spectroscopy Is one of the techniques in spectroscopy which is used in the identification of chemical compounds.
Mass spectroscopy works based on the principle of ionization. For a mass spectroscopy to start ionization must first occur that is to say this is the first step in the identification of compound in mass spectroscopy.
The following steps are involve in mass spectroscopy;
=> Ionization: the molecules of the sample are first ionized. The ions formed here are positive ions.
=> Acceleration: the ions in step one are accelerated.
=> Deflection: the smaller ions get deflected more than the bigger ions. The magnetic field is used in the deflection of this ions.
=> Detection: the ions are then detected.
Therefore, to answer the question, the ions are deflected and the lighter the ions the more the deflection.
Placing magnetic field in the path of the ions cause them to move in a curved path.
Which statement describes the result of this type of reproduction?
1)Each offspring has a different combination of genes.
2)Parents make reproductive cells with only half of their genes.
3)The offspring have identical genes.
4)Two parents are required to produce the offspring
Someone help me all I know it’s not A!!!
3. A boy with a mass of 30 kg is ice skating at a speed of 2m/s. What type of energy is he using and what are the joules?
Answer:
60 joules. ....................
Oxidation number of Al(OH)4
Explanation:
The sum of all oxidation numbers in a neutral compound is zero. The sum of all oxidation numbers in a polyatomic (many-atom) ion is equal to the charge on the ion. The oxidation number of oxygen in a compound is usually –2. The oxidation state of hydrogen in a compound is usually +1.
The oxidation state of Al in Al(OH)
4
−
x+4(+1−2)=−1
∴x=+3
The oxidation state of Mn in MnO
2
y+2(−2)=0
∴y=+4
thank u
What are mand n in the rate law equation?
Rate = k[A]”[B]"
A (they are experimentally determined exponents)
tell me how is your life as a youngster
Answer:
ruthless, my style as a juvenile
ran with a gang, slanged in the meanwhile
Explanation:
A silver nitrate solution contains 14.77 g of primary standard AGNO3 ( Molecular weight 169.87) in 1.00 L. What volume of this solution will be needed to react with 0.2631 g of NaCl ( Molecular weight 58.44) ?
Answer:
[tex]V=5.2 mL=0.052L[/tex]
Explanation:
Hello!
In this case, since the chemical reaction between silver nitrate and sodium chloride is:
[tex]AgNO_3(aq)+NaCl(aq)\rightarrow AgCl(s)+NaNO_3(aq)[/tex]
We can see there is a 1:1 mole ratio between each solution; thus, we first compute the moles of each reactant considering their molar masses:
[tex]n_{AgNO_3}=14.77g*\frac{1mol}{169.87g}=0.087molAgNO_3\\\\ n_{NaCl}=0.2631g*\frac{1mol}{58.44}=0.0045molNaCl[/tex]
Now, since the concentration of the silver chloride solution is 0.087 M, we may assume that the concentration of the NaCl solution is the same, so we can compute the volume as shown below:
[tex]V=\frac{n_{NaCl}}{M}=\frac{0.0045mol}{0.087mol/L}\\\\V=0.052L[/tex]
Or:
[tex]V=5.2 mL[/tex]
Best regards!
The volume of solution needed to react with 0.2631 g of NaCl is 0.052 L.
How we calculate the volume?Volume of the solution will be calculated by using the below formula:
M = n/V, where
M = concentration in terms of molarity
n = no. of moles
V = volume
Given chemical reaction is:
AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq)
First we calculate the moles of given reactants by using the formula:
n = W/M , where
W = given mass
M = molar mass
Moles of AgNO₃ = 14.77g / 169.87g/mole = 0.087 mole
Moles of NaCl = 0.2631g / 58.44g/mole = 0.0045 mole
Concentration of AgNO₃ = 0.087 mole / 1L = 0.087M
From the stoichiometry of the reaction it is clear that mole ration of AgNO₃ & NaCl is 1:1. So, we take the concentration of NaCl is equal to the concentration of AgNO₃ and calculate the volume by using the above formula as:
Volume of NaCl = 0.0045mole / 0.087M = 0.052 L
Hence, 0.052 L is the required volume of NaCl.
To know more about moles, visit the below link:
https://brainly.com/question/17199947
How many lone pairs are jn Xel3+1
Iron melts at 1535 °C. What would this temperature be in Fahrenheit
Answer:
2,795 F
Explanation:
Which of the following are examples of limiting factors? a. water b. sunlight c. available mates d. all of the above
Answer: I believe the answer is D.) All of the above.
Explanation:
Question 5
2 pts
Balancing the following equation. Please use numerical answers
and use the number one instead of leaving it blank for this activity.
HC2H3O2+O2 ---> CO2+H20
Please help in balancing this equation
Answer:
HC₂H₃O₂ + 2O₂ —> 2CO₂ + 2H₂O
The coefficients are: 1, 2, 2, 2
Explanation:
From the question given above, the following data were obtained:
HC₂H₃O₂ + O₂ —> CO₂ + H₂O
We can balance the above equation as follow:
HC₂H₃O₂ + O₂ —> CO₂ + H₂O
There are 4 atoms of H on the left side and 2 atoms on the right side. It can be balance by writing 2 before H₂O as shown below:
HC₂H₃O₂ + O₂ —> CO₂ + 2H₂O
There are 2 atoms of C on the left side and 1 atom on the right side. It can be balance by writing 2 before CO₂ as shown below:
HC₂H₃O₂ + O₂ —> 2CO₂ + 2H₂O
There are 4 atoms of O on the left side and a total of 6 atoms on the right side. It can be balance by writing 2 before O₂ as shown below:
HC₂H₃O₂ + 2O₂ —> 2CO₂ + 2H₂O
Now the equation is balanced.
The coefficients are: 1, 2, 2, 2