Answer:
A
Explanation:
the kinetic energy of the particles leading to more collisions hence increased reaction rate
Answer:
The answer is d.
More collisions occur and the time required for the reaction decreases.
Hope this helps.
Please help me with number 12
Answer:
organisms in rain water and the number of organisms in pond water because the dependant variable never changes
Explanation:
because the dependant variable never changes
In which block of the periodic table is chromium (Cr) found?
The mass number of Fo? is 56. How many neutrons are there in a single Fo? atom?
28
30
56
58
Answer: A. 28
If we aren't talking about an isotope, then the number of neutrons and the number of protons in the nucleus are the same. Each proton weighs one atomic unit, and the same can be said about a neutron as well. So half of the weight is from the protons and half is from the neutrons. The electrons are extremely small relative to the protons that their weight is negligible.
Diphosphorus pentoxide(P2O5) reacts with water to form phosphoric acid, a major industrial acid. In the laboratory, the oxide is used as a drying agent. a.What is the mass of 4.65 x 10 22molecules of phosphorus pentoxide?
Answer: The mass of [tex]4.65\times 10^{22}[/tex] molecules of phosphorus pentoxide is 20.5 g
Explanation:
According to avogadro's law, 1 mole of every substance weighs equal to the molecular mass and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given molecules}}{\text {avogadro's number}}=\frac{4.65\times 10^{22}}{6.023\times 10^{23}}=0.0772moles[/tex]
1 mole of [tex]P_2O_5[/tex] weigh = 283.9 g
Thus 0.0772 moles of [tex]P_2O_5[/tex] weigh = [tex]\frac{283.9}{1}\times 0.0722=20.5g[/tex]
Thus the mass of [tex]4.65\times 10^{22}[/tex] molecules of phosphorus pentoxide is 20.5 g
The elements least likely to form bonds are found in which group?
Answer:
Noble gases are a unique set of elements in the periodic table because they don't naturally bond with other elements.
Explanation:
HAVE A GOOD DAY!
Answer:
The answer is Noble Gases!!
Explanation:
Hope i helped yall! Have a super fantastic day!! Play Among Us! (Of course when your done with school) lol, jk, but u can!! Byes yall!
Please help me thank u❤️
Answer:
chemcial energy :)
Explanation:
Answer:
at the light = radiant energy
at the line = electical energy
at the battery = chemical energy
Complete the passage to Distinguish between mechanical and electromagnetic waves.
Answer:
waves that move through matter only are called mechanical waves.
waves that move through space only are called electromagnetic waves.
Waves that move through matter only are called
(mechanical) waves.
Waves that move through space are called
(electromagnetic) waves.
Could I get a brainliest please?
Tom has 1 cup of a 5% vinegar-water solution, 2 cups of a 10% vinegar-water solution, and 3 cups of a 15% vinegar-water solution. He needs at least 8 cups of a 5% vinegar-water solution for his chemistry project. What is the number of cups of pure water he should add to the total of all his vinegar-water solutions to complete the project?
Answer:
Another eight cups of pure water will be required.
Explanation:
Start by calculating the amount (in cups) of vinegar in these six cups:
One cup of [tex]5\%[/tex] vinegar-water solution would contain [tex]0.05[/tex] cups of vinegar.Two cups of [tex]10\%[/tex] vinegar-water solution would contain [tex]2 \times 0.10 = 0.20[/tex] cups of vinegar.Three cups of [tex]15\%[/tex] vinegar-water solution would contain [tex]3 \times 0.15 = 0.45[/tex] cups of vinegar.Therefore, if these six cups of solutions were mixed, the mixture would contain [tex]0.05 + 0.20 + 0.45 = 0.70[/tex] cups of vinegar. Also, the mixture is supposed to have a volume of six cups. Therefore, the concentration of this six-cup mixture would be:
[tex]\displaystyle \frac{0.70\; \rm cups}{6\; \rm cups} \approx 12\%[/tex].
In other words, if these six cups of vinegar-water solutions are mixed, it would be necessary to dilute (by adding more water) before reaching the concentration of [tex]5\%[/tex].
The goal is to dilute this solution with [tex]0.70[/tex] cups of vinegar to a concentration of [tex]5\%[/tex]. Consider: what would be the volume the solution after dilution?
The volume of a solution can be found from the quantity and concentration of its solute:
Quantity of vinegar in this solution: [tex]0.70[/tex] cups.Concentration of vinegar in this solution: [tex]5\% = 0.05[/tex].After dilution, the volume of this solution would be:
[tex]\displaystyle \frac{0.70\; \rm cups}{0.05} = 14\; \rm cups[/tex].
At this moment, this solution only has a volume of six cups. Therefore, [tex]14 - 6 = 8[/tex] cups of pure water will be required.
NiS2(s) + O2(g) --> NiO(s) + SO2(g) When 11.2 g of NiS2 react with 5.43 g of O2, 4.86 g of NiO are obtained. The theoretical yield of NiO is Blank 1 , the limiting reactant is Blank 2 and the percent yield is Blank 3 %.
Answer:
1. The theoretical yield of NiO is 5.09g.
2. O2 is the limiting reactant.
3. The percentage yield of NiO is 95.5%
Explanation:
Step 1:
The balanced equation for the reaction is given below:
2NiS2(s) + 5O2(g) —> 2NiO(s) + 4SO2(g)
Step 2:
Determination of the masses of NiS2 and O2 that reacted and the mass of NiO produced from the balanced equation. This is illustrated below below:
Molar mass of NiS2 = 59 + (32x2) = 123g/mol
Mass of NiS2 from the balanced equation = 2 x 123 = 246g
Molar mass of o3= 16x2 = 32g/mol
Mass of O2 from the balanced equation = 5 x 32 = 160g
Molar mass of NiO = 59 + 16 = 75g/mol
Mass of NiO from the balanced equation = 2 x 75 = 150g
Summary:
From the balanced equation above, 246g of NiS2 reacted with 160g of O2 to produce 150g of NiO
Step 3:
Determination of the limiting reactant. This can be obtain as follow:
From the balanced equation above, 246g of NiS2 reacted with 160g of O2.
Therefore, 11.2g of NiS2 will react with = (11.2 x 160)/246 = 7.28g of O2.
From the above calculation, we can see that it will take a higher mass of O2 i.e 7.28g than what was given i.e 5.43g to react completely with 11.2g of NiS2.
Therefore, O2 is the limiting reactant and NiS2 is the excess reactant.
1. Determination of the theoretical yield of NiO.
In this case, the limiting reactant will be used as all of it is consumed in the reaction. The limiting reactant is O2.
From the balanced equation above, 160g of O2 reacted to produce 150g of NiO.
Therefore, 5.43g of O2 will react to produce = (5.43 x 150)/160 = 5.09g of NiO.
Therefore, the theoretical yield of NiO is 5.09g.
2. The limiting reactant is O2. Please review step 3 above for explanation.
3. Determination of the percentage yield of NiO. This is illustrated below:
Actual yield of NiO = 4.86g
Theoretical yield of NiO = 5.09g
Percentage yield =..?
Percentage yield = Actual yield /Theoretical yield x 100
Percentage yield = 4.86/5.09 x 100
Percentage yield of NiO = 95.5%
OK this is a serious question now XD A) NAME ONE WAY THAT ORGANISMS USE CARBON= ? B) NAME THE ONE PROCESS WHICH DECREASES CO2 IN THE ATMOSPHERE= ? C) NAME THE ONE PROCESS WHICH INCREASES CO2 IN THE ATMOSPHERE= ?
Answer:
A) anaerobic respiration
B) photosynthesis
C) breathing
What forces hold ionic solids together?
O A. lonic bonds
B. Covalent bonds
C. Metallic bonds
D. Hydrogen bonds
SU
Answer:
the bond that hold the ionic solids together is the ionic bond while the force that holds them together is the electrostatic force.
Explanation:
What is the concentration of iodine molecules, I 2 in a solution containing 2.54g of iodine in 250 cm 3 of solution?
Answer:
) Molar concentration =1000*2.54/(127*250) ;since molarity=1000*W/M*V
=0.08 M here W=amount of solute in gm
M= molecular weight of solute
v=volume of solution in ml or cm3
2)% concentration (w/v) =(2.54/250)*100=1.016%
Explanation:
Vincent graduated from college with a degree in horticulture and now owns a local plant nursery. He maintains a blog titled, "How to Live a Happy Life,” and writes that people can lead happier lives by varying the routes they usually take home from work. Which statement best evaluates this claim? This claim is scientific because it is based on Vincent’s personal experience. This claim is scientific because other people have taken his advice and are now happier. This claim may not be accurate because the blog is produced by someone who is not an expert in the field of human psychology. This claim may not be accurate because most people follow the same route home.
Answer:
this claim may not be accurate because the blog is produced by someone who is not an expert in the field of human psychology.
Explanation:
Answer:
this claim may not be accurate because the blog is produced by someone who is not an expert in the field of human psychology.
Explanation: give the branliest to the otherperson :)
A farmer wants to start growing sweetcorn on his farm. He has found out that sweetcorn grows best in soil with a pH value of approximately 7.5. Explain how he can use the knowledge of acids, alkalis, and neutralisation to find out the pH value of his soil to make sure he gets the best crop possible
Answer:
The process to use this knowledge is explained as below:
Explanation:
1. Farmer should use an indicator to check the pH value of the soil of the field of the farm.
2. If the field or the farm has alkali soil add acid to reduce the pH value.
3. If the soil of the farm is acidic for the crop add alkali to increase the pH value.
4. It will be a neutralization reaction and changes the pH value of the farm.
5. Weather/leeching into the surrounding soil/plant or animal waste will lead to a change in pH value over time.
6. The pH value will need to be regularly monitored and adjusted.
What does a high boiling point temperature indicate about a substance?
A. Little heat has been added to the system.
B. Intermolecular forces are hard to overcome.
C. Chemical bond energy is very high.
D. The pressure over the liquid is very low.
Answer:
B. Intermolecular forces are hard to overcome
Explanation:
A high boiling point indicates greater inter molecular forces between the molecules of the substance. Inter molecular forces is the force of attraction between the molecules of the substance, which has to be overcome or broken before the substance boils. Example, when water boils, the water molecule (H₂O) will be broken into hydrogen molecule and oxygen molecule.
Therefore, a high boiling point temperature indicates that intermolecular forces of the substance are hard to overcome.
B. Intermolecular forces are hard to overcome
Answer:
b
Explanation:
In the equation E = mc2, what does c represent?
Answer:
c is the speed of light
Explanation:
E: energy
m: mass
c2: speed of light squared
help me is a critic acid a solid or a liquid??
Answer:
See below
Explanation:
It is neither, at least not at room temperature.
Citric acid exists as a power at room temperature, but can be crystallized from cold water. This can be considered it's " solid state, " but as I mentioned before this acid is a powder. Take a look at the attachment below. This is a citric acid present as a crystal;
If 0.84 mol of CS2 reacts with oxygen completely according to the equation CS2(ℓ) + 3 O2(g) → CO2(g) + 2 SO2(g) what volume (total) would the products occupy if they were measured at STP?
Answer:
The products will occupy a volume of 56.448 L when measured at STP
Explanation:
The first thing to check here is the mole ratio of the reactant in question to the product.
From the chemical equation, we can see that 1 mole of CS2 gave a total mole of 3 moles of the products(1 mole of carbon iv oxide and 2 moles of sulphur iv oxide)
Now if 1 mole of reactant can give 3 moles of the products,
then 0.84 mole of reactant will give 3 * 0.84 moles of the product = 2.52 moles of the products
We are told to calculate the total volume.
At STP , 1 mole of a gaseous substance will occupy a volume of 22.4L or 22.4 dm^3 (liters and dm^3 are same)
This means that 2.52 moles will occupy a volume of 22.4 * 2.52 = 56.448L
which gas is used to take out blueprint
The blueprint process
The best known is a process using ammonium ferric citrate and potassium . The paper is impregnated with a solution of ammonium ferric citr
A sample of wood with a mass of 30 g has its
temperature changed from 10° to 45° C. In the
process, it releases 90 J of heat. What is its specific
heat?
Answer:
0.086J/g°C
Explanation:
The following data were obtained from the question:
Mass (M) = 30g
Initial temperature (T1) = 10°C
Final temperature (T2) = 45°C
Change in temperature (ΔT) = T2 – T1 = 45°C – 10°C = 35°C
Heat (Q) released = 90J
Specific heat capacity (C) of wood =..?
We can obtain the specific heat capacity of the wood as follow:
Q = MCΔT
90 = 30 x C x 35
Divide both side by 30 x 35
C = 90/(30 x 35)
C = 0.086J/g°C.
Therefore, the specific heat capacity of the wood is 0.086J/g°C.
. ______________ will slow down alcohol absorption. Sleeping well Food in the large intestine Being happy and relaxed Food in the stomach that is high in protein
Answer:
Food in the stomach that is high in protein will dilute absorption of alcohol in your stomach :) therefore always drink with food in your stomach, just drinking alchol without food will have serious consequences on helath.
Explanation:
pls help me 13 min left if you go past and not help are not mine
Answer:
mushroom
mold
spore cases
hyphae
fungus
Why is chemistry a science, but alchemy was not?
Answer: Because alchemy was based on mystical belief instead of the scientific method.Soo.. Chemistry uses experiments to test ideas whereas alchemy used superstitious practices.
Explanation:
Answer:
that was because Alchemy was based on experimentation and had little basis in Science, while Chemistry utilizes both experimentation and scientific practices.
Explanation:
HELP ASAP: Determine the enthalpy change of the following reaction: CH4 + 4Cl2 -> CCl4+ 4HCl
Given enthalpies:
CH4: -17.9 kJ/mol
Cl2: 0 kJ/mol
CCl4: -95.98 kJ/mol
HCl: -92.3 kJ/mol
A. -447.28 kJ/mol
B. -206.18
C. -170.38
D. -393.58
Answer:
A
Explanation:
In this question, we are to calculate the enthalpy of change of the reaction. ΔH
To be able to do that, we use the Hess’ law and it involves the subtraction of the summed heat reaction of the reactants from that of the product.
Thus, mathematically, the enthalpy of change of the reaction would be;
[ΔH(CCl4) + 4 ΔH(HCl)] - [ΔH(CH4) + 4 ΔH(Cl2)]
We can see that we multiplied some heat change by some numbers. This is corresponding to the number of moles of that compound in question in the reaction.
Also, for diatomic gases such as chlorine in the reaction above, the heat of reaction is zero.
Thus, we can have the modified equation as follows;
[ΔH(CCl4) + 4 ΔH(HCl)] - [ΔH(CH4)]
Substituting the values we have according to the question, we have;
-95.98 + 4(-92.3) -(-17.9)
= -95.98 - 369.2 + 17.9
= -447.28 KJ/mol
hello can you please help me to solve above questions. .
Answer:
i)a. P & R
b. Q& S
ii) R
iii) Atomic no & Atomic radius
2)a. C4H10
b. CH3Cl
How does temperature affect the rate of a reaction?
A. Increasing the temperature decreases the potential energy of the
reactants.
B. Increasing the temperature gives the molecules more kigetic
energy
C. Increasing the tek perature increases the concentration of the
reactants
D. increasing the per perature lowers the activation energy of the
reaction
Atomic radii decrease, moving from left to right across a period. As a result, the electrons become closer to the nucleus. What effect does this movement have on the ionization energy (the amount of energy required to remove an electron from an atom)? The ionization energy stays the same. The ionization energy decreases. The ionization energy increases. Electrons have no effect on ionization energy.
Answer:
The ionisation energy increases.
Explanation:
This is because the force of attraction between the electrons and the positive nucleus will increase
Mention 6 products from coal tar as a result of destructive distillation of coal
Answer:
Coke, coal gas, gas carbon, ammonia liquor, and coal oil
what mass of methanol is produced when 280.2 g of carbon monoxide reacts with 50.5 g of hydrogen? CO(g)+2H2(g)—> CH3OH(l)
Answer:
320.23g of CH3OH.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
CO(g) + 2H2(g)—> CH3OH(l)
Next, we shall determine the masses of CO and H2 that reacted and the mass of CH3OH produced from the balanced equation. This is illustrated below below:
Molar mass of CO = 12 + 16 = 28g/mol
Mass of CO from the balanced equation = 1 x 28 = 28g
Molar mass of H2 = 2x1 = 2g/mol
Mass of H2 from the balanced equation = 2 x 2= 4g
Molar mass of CH3OH = 12 + (3x1) + 16 + 1 = 32g/mol
Mass of CH3OH from the balanced equation = 1 x 32 = 32g
From the balanced equation above,
28g of CO reacted with 4g of H2 to produce 32g of CH3OH.
Next, we shall determine the the limiting reactant. This is illustrated below:
From the balanced equation above,
28g of CO reacted with 4g of H2.
280.2g of CO will react with =
(280.2 x 4)/28 = 40.03g of H2.
From the calculations made above, we can see that only 40.03g out of 50.5g of H2 is required to react completely with 280.2g of CO.
Therefore, CO is the limiting reactant and H2 is the excess reactant.
Finally, we shall determine the mass of methanol, CH3OH produced from the reaction.
In this case, the limiting reactant will be used because it will give the maximum yield of the reaction since all of it is used up in the reaction. The limiting reactant is CO and the mass of methanol, CH3OH produced can be obtained as follow:
From the balanced equation above,
28g of CO reacted to produce 32g of CH3OH.
Therefore, 280.2g of CO will react to produce = (280.2 x 32)/28 = 320.23g of CH3OH.
Therefore, 320.23g of CH3OH were produced from the reaction.
Oil with a surface tension of 0.01 N/m is trapped in a bed of material with permeability of 1x10^-10 m^2 and a length of 150 m. We want to push the oil out of the bed by pumping in an extraction fluid (neglect the properties of this fluid) at 12000 kPa. When the oil stops coming out, what fraction of oil will be left in the bed?
Answer:
fraction of oil left in the bed = 8 × 10 ⁻⁷
Explanation: