Answer:
Alkali metals
Explanation:
The lowest number of valence electrons is found in the alkali metals (group 1), which have only one valence electron per atom.
Answer:
Alkali metals:) im 100% sure because i just got done learning everything in the periodic table:)
Explanation:
Which of the following is not an example for electroplating? A Tin cans for storing food
B Chromium used on bath taps to get shiny appearance
C Copper used for making electrical wires
D To protect iron objects used in machineries, from corrosion
If you answer you will get brainiest
Please answer and thank
Answer:
C. Copper used for making electrical wires
Explanation:
When a coating of a particular metal is applied on another metal, the process is termed as electroplating. The process is carried by the process of electro-deposition. This process is carried on in order to enhance the quality of the objects manufactured. The coating helps in resistance and provides an attractive appearance to the object.
Option C. is not an example of electrocoating because on the copper wires no other metal coating is done. In all the other three options, coating has been done on the object.
if water is added to a 0.70 molar solution of CuSO4 what will change
A. molarity will increase
B. Molarity will decrease
C. the amount of CuSO4 will decrease
D. No change in molarity or amount of salute
Answer:
B. Molarity will decrease
Explanation:
Molarity is one of the measures of the molar concentration of a solution. It is calculated by dividing the number of moles of the solute by the volume of the solvent. This means that the higher the amount of solute in relation to the volume of solvent, the higher the molarity of that solution.
In essence, adding water to a solution dilutes it i.e it increases the solvent's volume in relation to the solute, causing the molarity to decrease. In a nutshell, diluting a solution (by adding water or more solvent) causes the molarity of such solution to decrease. For example, if water is added to a 0.70 molar solution of CuSO4, the molarity of the solution will DECREASE.
A clownfish uses a sea anemone as a safe place to live. While living there, the clownfish lures in food for the anemone. This is an example of what type of relationship?
Identify any incorrect formulas. Explain your answer.
a. Mg2(SO4)3
b. Rb3As
c. BeCl3
d. NaF
Wish I could award more points but I'm running low.
The formula of a compound is written based on the valency of each bonded atoms. The formulas Mg₂(SO₄)₃, Rb₃As are incorrect. Such compounds does not exist.
What is chemical formula?The formula of a chemical compound is written based on the number of atoms participated in bonding. Magnesium is second group element having two valence electrons.
Magnesium thus donates its two electrons into the bonding atom or group. The sulphate group SO₄ have a valency of 2 it gains two electrons from Mg when bonded.
Thus the formula of magnesium sulphate being MgSO₄ and not Mg₂(SO₄)₃. Similarly Rb is a second group metal having two valence electrons. Its valency being two. As is a halogen with valency one. Thus they cannot form a compound like Rb₃As.
Hence, option a and b are incorrect formulas.
To find more about chemical formulas, refer the link below:
https://brainly.com/question/11995171
#SPJ2
Explain what you discovered from the Simulation about why food coloring spreads faster in warmer water.
Answer:
The food colouring mixes through the hot water faster than it mixes with the cold water, this is because in hot water the water molecule have more energy and are moving faster than the molecules of cold water .This makes it easier for the food colouring to get mixed quickly through the hot water.
What is an important effect of gravity?
Answer:
pulling objects with mass closer to each other
Explanation:
that is the only role of gravity
Please help I’ll even give you brainliet
What is the molecular formula for a compound that is 34.31% sodium, 17.93% carbon, 47.76% oxygen and has a molar mass of 134.00g?
Answer: Na2C2O4 probably sodium oxalate
Explanation: assume you have 100 g substance.
Mass of Na is m(Na) = 34.31 g, m(C) = 17.93 g and m(O) = 47.76 g.
Calculate moles n(Na) = 34.31 g/22.99 g/mol= 1.49 mol.
For C n(C) = 1.49 mol and n(O) = 2.985. You divide all by 1.49 you
Get n(Na) : n(C) : n(O) = 1:1:2 M(NaCO2) = 67 g/mol.
Divide 134:67 = 2. You get formula Na2C2O4
WDYT a mixture is? Please help
Answer:
A mixture is when two substances are physically combined and can be taken apart.
Explanation:
my words
Kevin is working on a model that shows the positions of Earth, the Moon, and the Sun during the phases of the Moon. How should he position them to show a New Moon?
What is the name of this nuclear process ?
Answer:
Fission
Explanation:
questions.
1) The degree of polarity of a bond is indicated by
A. Ionization energy difference
B. The shape of the molecule
C. Electronegativity difference
D. The partial charges of the molecule
2) When electrons are shared unequally, chemists characterize
Answer:
d
Explanation:
the partial charges of the molecule
a car motor running as a car travels down the road.
Kinetic Energy
Potential Energy
Answer:
kinetic energy
Explanation:
force is used
Question number 12 I need help
Answer: Its B.
Explanation:
i cant quite explain
Which statement best describes the polarity of the molecule Sil4?
Answer:
I dont a picture
Explanation:
but the answer is 24
Which of the following best describes the difference between metals and nonmetals?
a
metals tend to have low melting points and nonmetals have high melting points
b
nonmetals are more reactive than metals
c
metals are brittle and dull
d
metals have high melting points and are malleable, whereas, nonmetals have lower melting points and tend to be brittle.
Answer:
the answer is d.
Explanation:
because metals are refers to natural elements that are hard, shiney, opaque, and dense. nonmetals implies thise chemical substances that are soft, non-shiney, transparent and brittle.
what is the difference b/w combustion and synthesis reaction ?explain with example
Answer:
A synthesis reaction occurs when two or more reactants combine to form a single product in a double replacement reaction two compounds exchange elements. Combustion reaction occurs when a substance reacts quickly with oxygen combustion is commonly called burning. Example'- for synthesis reaction is iron+ oxygen —≥ water . Example:- for combustion reaction is often gaseous products.
may be this was ur answer I hope it might help u
In an ecosystem, which of the fcHlowing is NOT a trait of living organisms?
Contains DNA
Can reproduce
Made of cells with membrane
Responds to stimuli
Answer:
responds to a stimuli or made of cells with membrane
Explanation
Equilibrium constant Kp for the reaction P4(s) + 6Cl2(g) 4PCl3(l) Kp = 1/ P6Cl2 Kp = P4Cl3/ P6P4 Kp = P4Cl3/ (P6P4) (P6Cl2) Kp = 1/ (P6P4) (P6Cl2)
Answer: [tex]K_p=\frac{1}{[p_{Cl_2}]^6}[/tex]
Explanation:
Equilibrium constant is defined as the ratio of pressure of products to the pressuure of reactants each raised to the power their stoichiometric ratios. It is expressed as [tex]K_p[/tex]
For the given chemical reaction:
[tex]P_4(s)+6Cl_2(g)\rightarrow 4PCl_3(l)[/tex]
The expression for [tex]K_p[/tex] in terms of gaseous is written as:
[tex]K_p=\frac{1}{[p_{Cl_2}]^6}[/tex]
Determine the correct set-up below to determine what mass, in grams, of N2 is needed to completely react with 105 g F2 ?
Answer:
C: 1 mol F2/38 g F2
Explanation:
The reaction equation is;
N2 + 3F2 = 2NF3
Now, to know how many grams, of N2 is needed to completely react with 105 g F2 and since the molar mass of N2 is 28.02 g/mol, Molar mass of F2 is 38 g/mol, number of moles attached to N2 and F2 in the reaction are 1 and 3 moles respectively, then we will have;
105 g F2 × 1 mol F2/38 g F2 × 1 mol N2/3 mol F2 × 28.02 g N2/1 mol N2
Option C is Thus correct
What do acids do in solution?
A solution of 1.8274g of a polypeptide in 274mL of a aqueous solution has an osmotic pressure at 31.40 degrees C of 2.012 mmHg. The approximate molecular weight of this polymer is _____ g/mol.
Answer: Hence, the approximate molecular weight of the poymer is 64106 g/mol
Explanation:
[tex]\pi=CRT[/tex]
where,
[tex]\pi[/tex] = osmotic pressure of the solution = 2.012 mm Hg = 0.0026 atm
i = Van't hoff factor = 1 (for non-electrolytes)
Mass of solute (polypeptide) = 1.8274 g
Volume of solution = 274 mL
R = Gas constant = [tex]0.0821Latm/Kmol[/tex]
T = temperature of the solution = [tex]31.40^0C=(273+31.40)K=304.4K[/tex]
Putting values in above equation, we get:
[tex]0.0026=\frac{1.8274 g\times 1000}{M\times 274ml}\times 0.0821\times 304.4[/tex]
[tex]M=64106g/mol[/tex]
Hence, the approximate molecular weight of the poymer is 64106 g/mol
Can you help me please
Answer:
Explanation:
h
If the moon is full on January 16, on approximately what date will it be full in February?
A. February 10
B. February 22
C. February 1
D. February 12
Answer:
February 12th.
Explanation:
Trust me.
From point A to point B, the car will . From point B to point C, the car will . Assuming the washer on the car is not blocked by the book, once the car hits the book, the washer will still have . This experimental design will examine Newton’s law.
Answer:
Accelerate, Have Constant velocity, Velocity, and First
Explanation:
Got it right on edge. have a wonderful day!!!
From point A to point B, the car will . From point B to point C, the car will assuming the washer on the car is not blocked . It will examine Newton’s law will be "Accelerate, Have Constant velocity, Velocity, and First."
What is Newton’s law ?The link between an object's motion with even the forces acting on it is outlined by Newton's laws of motion, which were three fundamental principles of classical mechanics.
What is velocity?The displacement of the item in one unit of time would be the definition of velocity.
Therefore, from point A to point B, the car will . From point B to point C, the car will assuming the washer on the car is not blocked . It will examine Newton’s law will be "Accelerate, Have Constant velocity, Velocity, and First."
To know more Newton’s law and Velocity
https://brainly.com/question/27573481
#SPJ3
The Olympian swam 200 meters in 20 seconds.
1) velocity
2) acceleration
3) speed
Answer: velocity
Explanation:
Characteristics of a substance that describe its' ability to change into a different substance are called?
Why are most anions basic in H2O? Give formulas of four anions that are not basic.
Answer:
The anions that can act as bases (conjugate bases of weak acids) have the capability to hydrolyse water and produce OH− ions. Cl−, Br−NO−3, SO2−4 are all conjugate bases of strong acids that don't have the capability to hydrolyse water and so they aren't basic.
Explanation:
menciona tres ejemplos en los que un cálculo incorrecto en los en ingredientes indispensables para la elaboración de un producto traería consecuencias graves químicamente hablando
Explanation:
Cada producto o servicio, independientemente de su propósito, debe ser seguro de usar y desarrollado de acuerdo con los más altos estándares de calidad y seguridad.
Algunos ejemplos de cálculo incorrecto de ingredientes que tendrían graves consecuencias químicas podrían ser:
Medicamentos y vacunas: Este es quizás uno de los ejemplos que tendría las consecuencias más graves para las personas si hubiera un cálculo incorrecto de ingredientes, ya que la producción de medicamentos y vacunas es una industria que requiere la máxima calidad agregada debido a que se ocupa directamente de la salud y los errores de formulación pueden agravar la enfermedad y causar la muerte. Actualmente tenemos el ejemplo de la vacuna para el control de la pandemia, que antes de ser aprobada tuvo que someterse a una serie de investigaciones, pruebas en humanos y diferentes fases para demostrar su efectividad y no causar daño al organismo humano.
Cosméticos: Existen cosméticos de la industria de la belleza que tienen la función de prevenir el envejecimiento cutáneo, alisar el cabello, etc. Por tanto, un cálculo incorrecto de los ingredientes químicos también podría provocar daños irreversibles a la salud, como quemaduras en la piel, caída del cabello, alergias, cáncer, etc.
Alimentos: La industria alimentaria utiliza componentes químicos con el fin de conservar los productos y aumentar la vida útil, por lo que si se usan en cantidades mayores de las necesarias, dichos compuestos pueden causar enfermedades en las personas como intoxicación alimentaria, cáncer, gastritis, etc.
Which is an energy source for a coyote?
Answer:
The coyotes are both a plant and meat eaters whose common food is 90% of their diet, is small animals. Rabbits, hares, birds, snakes, fish, crustaceans, and insects are all on the menu.
hopefully this is right :))
Answer:
sun
Explanation:
Which rate law is consistent with the mechanism?