Answer:
1.9 x 10^-20 Joules
Explanation:
I'll assume the frequency is 2.9 x 10^13 Hz [5-1 was meant to be s^-1].
The energy of a photon is given by the releationship:
E = hf, where E is energy, h is Planck's constant, and f is frequency, in 1/s or Hz.
Planck's constant = 6.62607E-34 J*s
E = hf
E = (6.626 x 10^-34 J*s)*(2.9 x 10^13 s^-1)
E = 1.9 x 10^-20 Joules
the compound calcium iodide is a strong electrolyte. write the reaction when solid calcium iodide is put into water.
(Sodium iodide) NaI (s) → (Sodium) Na⁺(aq) + (iodide) I⁻(aq)
The chemical formula of sodium iodide is NaI. When NaI is dissolved in water, it dissociates into sodium ions (Na⁺) and iodide ions (I⁻). One mol of NaI gives 1 mole of Na⁺ ions and 1 mole of I⁻ ions.
Therefore, the chemical equation for the dissociation is the following:
NaI(s) → Na⁺(aq) + I⁻(aq)
What is sodium?
Sodium is a reactive, soft metal with a low melting point and most vital of all alkaline metals from the commercial viewpoint. It reacts speedily with water, snow, and ice to make sodium hydroxide. Sodium chloride is received by the reaction of sodium with chlorine. It is also consumed as a salt in fertilizers.
(Sodium iodide) NaI (s) → (Sodium) Na⁺(aq) + (iodide) I⁻(aq)
The chemical formula of sodium iodide is NaI. When NaI is dissolved in water, it dissociates into sodium ions (Na⁺) and iodide ions (I⁻). One mol of NaI gives 1 mole of Na⁺ ions and 1 mole of I⁻ ions.
Therefore, the chemical equation for the dissociation is the following:
NaI(s) → Na⁺(aq) + I⁻(aq)
To know more about sodium, visit:-
https://brainly.com/question/20060170
#SPJ4
why do alcohols undergo nucleophilic substitution reactions with hydrogen halides but not with halide salts?
Alcohols undergo nucleophilic substitution reactions with hydrogen halides because the hydrogen halides are strong acids and can donate a hydrogen cation (H⁺) to the oxygen in the alcohol.
The donation of a proton creates a new cation and a new anion. The new cation acts as a nucleophile and attacks the electrophilic carbon in the hydrogen halide.
Halide salts, however, cannot undergo nucleophilic substitution reactions with alcohols because the halide ions (Cl⁻, F⁻ etc.) are already neutralized.
The halide ions do not have a hydrogen cation to donate to the oxygen in the alcohol and therefore cannot form a new cation and anion.
As a result, the nucleophilic substitution reaction cannot occur.
To know more about the SN1 mechanism, click here:
https://brainly.com/question/28932396
#SPJ4
butane is trapped as described in the procedure for this experiment in graduated cylinder at an atmospheric pressure of 1.007 atm. the water temperature is recorded to be 20.0 °c, and the volume of gas trapped is 26.7 ml with a mass of 0.065 grams. what is the molar mass of butane based on these calculations?
The molar mass of butane is 54.62mol^-1.
What do you mean by molar mass?
Substances take up space and have mass. Molecules, which make up substances, often need to be measured in experiments, and it is important that these measurements are accurate. But, how can we measure something so small in an accurate way? How do we normally measure molecules? In the science laboratory, we use a tool called an analytical balance to measure in grams.
Through careful calculation, scientists can determine the number of moles a specific reaction will need. A mole is a unit of measure that helps us compare particles of any given substance and its mass. If we already know the number of moles needed, we can use the concept of molar mass to calculate how many grams of the substance are required. The molar mass, also known as molecular weight, is the sum of the total mass in grams of all the atoms that make up a mole of a particular molecule. The unit used to measure is grams per mole.
Given,
Pressure = 1.007 atm = 1.02 bars
Volume = 26.7 ml = 0.0267L
Temperature = 20degree C= 293 K
By applying ideal gas equation ,
We can find number of moles of butane
n = PV/RT
So, P*V=1.02 bar * 0.0267L = 0.027234
R*T = 0.083 (bar L K^-1mol^-1) * 293K = 24.319
Therefore, n = 0.027234/24.319 = 0.00119moles
Now,
To calculate molar mass of butane
We know,
Molar mass = mass of substance in gms/ no. of moles in substance
Here, mass of butane is given as 0.065gm
Therefore, molar mass = 0.065 /0.00119
= 54.62
Hence, molar mass of butane is 54.62mol^-1
To know more about molar mass from the given link:
https://brainly.com/question/22503632
#SPJ4
EXPERIMENT 1: Which type of half-cell, when used along with a Mn/Mn2+ half-cell, gives the largest cell potential? Select one: O a. Cu2+/cu o b. Pb2+/Pb o c. Zn²+Izn od. The potential for all three cells is the same.
the largest cell potential when used along with a Mn/Mn2+ is Cu²⁺/Cu
A voltaic cell or galvanic cell is a battery that uses electrochemical energy produced from redox reactions to produce electricity. In this reaction, manganese is the anode and copper is the cathode.
Half-cell responses and respective cell potentials are shown below.
Mn = Mn²⁺ + 2e⁻ E°=-1.18V
Zn²⁺ +2e⁻ = Zn E° = -0.76V
Pb²⁺ + 2e⁻ = Pb E° -0.13
Cu²⁺ + 2e⁻ = Cu E° 0.34
When Solving Cell Potentials
E° cell = E° cathode -E° anode
for Mn and Zn.
Mn (s) + Zn²⁺(aq)→ Mn²⁺(aq)+Zn(s)
E° cell = −0.76v−(−1.18v)=0.42v
For Mn and Pb the following applies:
Mn(s)+ Pb²⁺(aq) → Mn²⁺(aq) + Pb(s)
E° cell = −0.13v−(−1.18v)=1.05v
For Mn and Cu:
Mn(s)+ Cu²⁺(aq) → Mn²⁺(aq) + Cu(s)
E° cell = 0.34-(-1.18) = 1.52V
The Cu happens to be the largest among the others.
learn more about cell potential at https://brainly.com/question/13134808
#SPJ4
according to dr. martin seligman, which property/properties must an element have to be considered an element of well-being?
According to Dr. Martin Seligman, there are five essential elements that must be present for an individual to experience well-being:
Positive emotionEngagementRelationshipsMeaningAccomplishmentThe Five Essential Elements of Well-BeingWell-being is a state of mind, body, and spirit that allows individuals to be at peace, content, and fulfilled in their lives. Dr. Martin Seligman, a leader in the field of Positive Psychology, has identified five essential elements that must be present for an individual to experience a true sense of well-being.
Positive emotion involves feeling joy, pleasure, and satisfaction in life. This can be achieved through self-care activities such as:
MeditationYogaRelaxation techniquesIt is important to find activities that bring you joy and make you feel connected to yourself, other people, and the world around you.
Learn more about Elements of Well-Being:
https://brainly.com/question/3569723
#SPJ4
what is the definition of the standard cell potential (e∘cell) ? what is the definition of the standard cell potential ? the standard cell potential is an individual potential of an electrode. the standard cell potential is a potential of the standard hydrogen electrode. the standard cell potential is the cell potential under standard conditions (1 m concentration for reactants in solution and 1 atm pressure for gaseous reactants). the standard cell potential is the difference in voltage between the initial state and the final state.
The standard cell potential (e-cell) is a measure of the potential difference between two half-cells, each of which contains a reversible electrochemical reaction.
It is a measure of the maximum potential that can be achieved when the two half-cells are connected, with no external electrical circuit. The standard cell potential can be calculated by subtracting the standard reduction potential of the reduction reaction from the standard oxidation potential of the oxidation reaction.
The standard cell potential is expressed in volts and is a measure of the maximum amount of energy that can be released when the two half-cells are connected. It is the voltage that is available to power a device when the two half-cells are connected.
The standard cell potential is an important concept in electrochemistry, as it is used to calculate the Gibbs free energy of a reaction, and to determine the maximum theoretical yield of a reaction.
To know more about Galvanic cells, click below:
https://brainly.com/question/15096829
#SPJ4
the molecule below contains both an aldehyde and a ketone functional group. select only the carbonyl carbon atom of the aldehyde functional group. highlight the appropriate atom by clicking on it.
Aldehyde and ketone functional groups are two of the most important classes of organic compounds.
Aldehydes are organic compounds in which a carbon atom is double-bonded to an oxygen atom, forming an aldehyde group (R-CHO).
The below-attached image clearly represents the aldehyde and ketone functional groups separately.
Aldehydes are generally considered to be more reactive than ketones. This is due to the fact that aldehydes contain two electron-withdrawing groups (the oxygen and the carbon-hydrogen bond), while ketones contain only one electron-withdrawing group (the oxygen). This makes aldehydes more prone to attack by nucleophiles, and thus more reactive.
Ketones are organic compounds in which a carbon atom is triple-bonded to an oxygen atom, forming a ketone group (R-CO-R).
Both aldehydes and ketones can react with nucleophiles, such as hydrogen, to form reactive intermediates. These intermediates can then react with other molecules, such as alcohols, to form new compounds. Aldehydes and ketones are also both capable of undergoing a variety of other reactions, such as oxidation, reduction, and condensation.
Aldehyde and ketone functional groups are important components of many natural and synthetic compounds, including carbohydrates, proteins, and drugs. They are also important industrial chemicals and are used in the production of a variety of materials, from plastics to pharmaceuticals.
To know more about the carboxylic acid group, click below:
https://brainly.com/question/26855500
#SPJ4
125 g of al(s) reacts with 2.50 l of 3.20m of hcl(aq) according to the chemical equation shown above. which chemical, al or hcl, is the limiting reactant?
According to question, HCl is the limiting reactant, al is not the limiting reactant.
Equation is 3Al + 6 HCl = 2AlCl3 + 3H2 , Moles of Al are 125 ÷ 27= 4.6 moles and moles of HCl(aq) are 3.20 × 2.50 = 8.0000 . It is clear that moles of HCl to react with 4.6 moles of al(S) must be 2× 4.6 ie 9.2 but there are only 8 moles of HCl(aq). It display al can't react completely. So HCl(aq) must be a limiting reactant.
What is Reactant?
A substance that coalesces in a chemical reaction, is an object that is present at the beginning of the reaction.
What are Moles?
A standard scientific unit for measuring large amount of very small articles such as atoms, molecules, or other special particles.
To know more about Reactant, visit:-
https://brainly.com/question/18545141
#SPJ4
a sample of tin is heated until it finishes melting. the sample absorbs a total of 1050 j of heat. if the sample requires 460 j of heat to reach its melting point, how much heat is needed to completely melt the sample of tin?
The heat of fusion is the amount of heat energy needed to turn anything solid into a liquid. There is a formula, Q = mHf. Because matter doesn't affect temperature, the temperature is not a factor.
Will the addition of heat cause the temperature to rise during a phase change?There is no increase in the kinetic energies of the particles, and hence no rise in temperature, because the energy required for phase shifts is employed to break bonds. Similarly, energy is required to evaporate a liquid to defeat the attraction forces between the liquid's particles.
Does the temperature drop when a phase shift occurs?The energy that is given during a change in the state of matter is used to alter the binding energies rather than boost the kinetic energy of the molecules. As a result, the temperature doesn't change.
to know more about melting points here:
brainly.com/question/29578567
#SPJ4
a 0.2 gram sample of a candy bar is combusted in a bomb calorimeter, increasing the temperature of the 2000 g of water from 25.00◦c to 25.47◦c. what is ∆u in kj/g? ignore any heat loss or gain by the calorimeter itself.
The ΔU for candy is 35.68kJ/g.
What is bomb calorimeter?The HHV of a biomass fuel is calculated using a bomb calorimeter, which measures the heat released during the combustion of a specific amount of biomass sample. Following each test, a small amount of sample fuel is ground and diluted so that it will fit inside a capsule and be used in a bomb.
Mass of Candy = 0.2g
Mass of water = 2000 g
specific heat of water = 4.184 5g⁻¹°c⁻¹
Initial temperature = 25.00°C
final temperature = 25.47°C
Change in temperature = final- Initial
Change in temperature = 25.47-25.00
ΔT = 0.47°C
specific heat of calorimeter = 700J/k
Thus, Heat produced by the combustion of candy is absorbed by water and calorimeter.
Hence,
ΔU = Heat absorbed by water + Heat absorbed by calorimeter
ΔU = mass × specific heat × ΔT + specific heat × ΔT
ΔU = 2000 × 4.184 × 0.79 + 700 × 0.79
ΔU = 6.604 kJ + 0.532kJ
ΔU = 7.136kJ.
Thus, 0.2g of candy produced heat = 7.136kJ
1g of candy produced heat = 7.136/0.2 = 35.68kJ/g
Thus ΔU for candy = 35.68kJ/g.
To know more about bomb calorimeter visit:
https://brainly.com/question/24245395
#SPJ1
which element requires the leat amount of eneryg to remove the most loosley held electrom from a gasoues atom in the ground state
Sodium (Na) requires the least amount of energy to remove the most loosely held electron from a gaseous atom in the ground state.
Why sodium requires least amount of energy to remove most loosely electrons?
One electron only makes up the outermost shell of sodium as its electronic configuration of sodium is 2,8,1. While bromine has seven electrons and calcium has two. Silver is also typically the least reactive. As a result, sodium is the element that can lose one electron with the least amount of energy.
To know more about electronic configuration, check out https://brainly.com/question/26084288
#SPJ4
how much hcl must be added to a liter of buffer that is m in acetic acid and m in sodium acetate to result in a buffer fph o?
16.6 g of HCl must be added to a liter of a buffer that is 1.4 M in acetic acid and 0.75 M in sodium acetate to result in a buffer pH of 3.94.
A buffer is a solution that can withstand changes in pH caused by the addition of acidic or basic components. It can neutralize small amounts of added acid or base, allowing the pH of the solution to remain relatively stable. This is critical for processes and/or reactions that necessitate specific and stable pH ranges.
A buffer is made up of a weak acid and either its conjugate base or its conjugate acid. Buffer capacity is the amount of acid or base that can be added to a buffer before the pH changes. A buffer solution is bicarbonate in blood, which keeps the body's internal pH stable.
To learn more about Buffers, here
https://brainly.com/question/16023983
#SPJ4
. calculate the moles of water produced by the reaction of 1.70 mol of oxygen a major componet of gasoline is octane. when liquid octane is burned in air it reacts with oxygen gas to produce carbon dioxide gas and water vapor
A reaction between 1.70 moles of oxygen and 0.1 moles of carbon dioxide results in a mole of CO2. As a first step, we'll write the reaction's balanced equation. What follows is that: 16CO2 and 18H2O are produced by adding 2C8H18 and 25O2.
What is the purpose of oxygen?The chemical process that generates energy and powers the metabolisms of most living things, respiration, depends heavily on oxygen. The oxygen in the air that we breathe is essential for the survival of humans and many other animals.
Does breathing in oxygen make you sleepy?Wear your oxygen as directed by your healthcare practitioner. When utilizing supplemental oxygen, you may be receiving too much if you begin to feel headaches, disorientation, or excessive tiredness.
To know more about Oxygen visit:
https://brainly.com/question/2272415
#SPJ4
what type of solid will each of the following substances form? a)ch4 b)i2 c) graphite d)kcl e)c6h12o6 f)cabr2 g)sic h) au
Methane is a colorless, odorless gas that is present in large quantities in nature and as a byproduct of some human activities.
Methane is one of the most potent greenhouse gases and the most basic member of the paraffin family of hydrocarbons. For the purpose of improving their performance in molten chloride environments, pyrolytic graphite (PyG) was deposited on graphite substrates using thermal chemical vapour deposition and methane gas. By measuring interlayer spacing, crystallite size, and preferred orientation, X-ray diffraction was used to characterize the structural characteristics of the PyG deposit. The current study examines PyG's corrosion behavior in eutectic salt that is molten and 873 K. PyG samples lost very little weight while being tested in molten salt for 2000 hours in a controlled argon atmosphere. Using optical microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, and atomic force microscopy to characterize the samples as deposited and corrosion tested, it was determined that there had been no significant change in the surface morphology.To know about morphology -
https://brainly.com/question/4680824
#SPJ4
calculate the molar solubility of caf2caf2 in a solution containing 0.844 mm of ca(no3)2ca(no3)2 . the kspksp value for caf2caf2 is 1.46×10−101.46×10−10 .
1. Calculate the molar solubility of CaF2 in the solution by using the Ksp value:
Ksp = [Ca2+] [F-]2
1.46 x 10-10 = [0.844 x 10-3] [x]2
x = 2.83 x 10-3 mol/L
2. Calculate the molar solubility of CaF2 in the solution by using the molar ratio of CaF2 to Ca(NO3)2:
Molar ratio= [CaF2]/[Ca(NO3)2]= 2.83 x 10-3/0.844 x 10-3 = 3.36
3. Therefore, the molar solubility of CaF2 in the solution is 3.36 x 10-3 mol/L.
What is Molar Solubility?
Molar solubility is a measure of how much of a given solute can be dissolved in a given solvent. It is expressed as moles of solute dissolved in one liter of solution. It is an important parameter in the field of chemistry and is used to calculate the amount of a solute that can be dissolved in a given volume of solvent.
The solubility of a given compound is affected by several factors, including temperature, pH, and the presence of other solutes in the solution. A higher molar solubility indicates that a greater amount of the substance can be dissolved in the solution.
To know more about Molar solubility,
https://brainly.com/question/16027456
#SPJ4
As the color of the element becomes darker, the element is less metallic.” Do you agree or disagree with this statement, explain?
The element could be X is phosporus .
What is element?An element is the fundamental item that can't be easily broken onto smaller of pieces. In chemistry and physics, an elementary is a substance that can't be broken down by non-nuclear reactions. In computing and the mathematics, an element is the distinct piece of a larger system or set.
An ionic compound is formed to the ions, by which their charges replaced, so the compound Na₂X is formed by the ions Na⁺ and X⁻². So, X must gain two electrons to be stable at to by the octet, so it has six valence of the electrons. Because of it can accommodate by up to 12 electrons, the element is the expands the octet, do it must to be in the 3rd period or the higher.
To know more about elements click-
https://brainly.com/question/18096867
#SPJ1
Nuclear decay occurs according to first-order kinetics. A nuclide decays in 23. 0 minutes from 12. 9 g to 2. 04 g. What is the rate constant for the nuclide?.
The rate constant for the nuclide is 0.0803 min1.
What is first-order kinetics?
First-order kinetics refers to a type of chemical reaction in which the pace of the reaction is proportional to the amount of the reactant and is dependent only on the concentration of one component.
Two examples of first-order reactions are the aspirin hydrolysis and the reaction of t-butyl bromide with water to yield t-butanol. An such procedure that appears to have first-order kinetics is the hydrolysis of the anticancer drug cisplatin.
The concentration of one of the reactants affects the rate of a first-order reaction. The product of the concentrations of two reactants or the square of the concentration of a reactant determines the second-order reaction rate.
The rate constant for a first-order reaction can be determined by using the following equation:
k = -ln(N2/N1)/(t2-t1)
where N1 is the initial number of moles (12.9 g/98 g/mol = 0.131 mol), N2 is the final number of moles (2.04 g/98 g/mol = 0.0208 mol), t1 is the initial time (0 min) and t2 is the final time (23.0 min).
Plugging the values into the equation, we get:
k = -ln(0.0208/0.131)/(23.0-0) = -ln(0.0208/0.131)/23.0 = 0.0803 min-1
To learn more about first-order kinetics
Here: https://brainly.com/question/27754430
#SPJ4
There are hybrid orbitals represented by this picture. They are composed of s p d (number) atomic orbitals, corresponding to hybridization. They have an electron pair geometry of . With bond angles of (If more than one bond angle is possible, separate each with a space). ° . B-For each hybridization type, choose a picture that corresponds to the correct orbital picture and specify the electon pair geometry. ... If no picture matches, enter N. Hybridization ... Picture ... Electron Pair Geometry sp3 sp3d2 sp A ... B ... C C- A molecule has sp3 hybridization with 2 lone pairs. ... The electron pair geometry of this molecule is: ... The geometry of this molecule is: . ... This molecule will have an approximate bond angle of (If more than one bond angle is possible, separate each with a space.): °. D- 1. What is the hybridization of the central atom in BeI2? Hybridization = What are the approximate bond angles in this substance? Bond angles = ° 2. What is the hybridization of the central atom in POCl3? Hybridization = What are the approximate bond angles in this substance? Bond angles = °
Trigonal pyramidal molecular geometry
sp3 hybridization
sp³ - 4 p
There is some information missing. This, I believe, is the original question.
What are the electron-pair and molecular geometries of NBr3? What exactly is nitrogen atom hybridization? What orbitals on N and Br overlap to form these elements' bonds?
The overlap of the __ hybrid orbitals on nitrogen with the __ orbitals on Br forms the N-Br bonds.
The central atom of nitrogen is surrounded by four electron domains. The corresponding electron-pair geometry, according to VESPR, is tetrahedral.
Three of these four electron domains are covalent bonds with Br and one is a lone pair. The corresponding molecular geometry, according to VESPR, is trigonal pyramidal.
The nitrogen atom has a 1 s orbital and a
To learn more about geometry please click on below link
https://brainly.com/question/18612295
#SPJ4
Which of the following statements is TRUE?
A) If N/Z ratio is too high, there are too many protons and the nuclide will undergo positron emission or electron capture.
B) If N/Z ratio lies somewhere below 1, the nuclide is stable. C) If N/Z ratio is too low, there are too many neutrons and the nuclide will undergo beta decay.
D) The valley of stability is the geographic location where many of the known nuclides were first discovered.
E) None of the above is true
None of the above
None of the statements given above are true. So, option E is the correct answer.
If the N/Z is too high, it means that the number of protons is too less. In this case, the nuclide will undergo a beta decay process. It is done to increase the proton count. If the N/Z is too low, it means that there are more protons than neutrons, it will undergo positron emission and electron capture and not beta decay. Positron emission and electron capture increase the ratio, while beta decay decreases the ratio.
If the N/Z ratio is equal to 1, then only is the nuclide stable. The valley of stability is where the nuclides get stability based on their binding energy.
Learn to know more about nuclear stability on
https://brainly.com/question/13751780?referrer=searchResults
#SPJ4
when a 1.0 g sample of a candy bar is combusted in a bomb calorimeter whose total heat capacity (including the water) is 3.0 kj/oc, the temperature of the water increases by 7.0 oc. if the candy bar has a mass of 60 g, calculate the total number of calories that it contains. (1 calorie
The total number of calories that it contains is 301.15 calorie.
q = C ΔT
q = heat
C = specific heat capacity
ΔT = Change in temperature or increment in temperature
q = 3 × 7
q = 21 Kj
It is for 1gm sample of candy.
for 60 gm candy,
q = 60 × 21 = 1260.
4.184 j = 1 calorie
1260 KJ = 301.15 calorie.
Food items typically have calorie counts listed on them, and wearables like the best fitness trackers let you keep track of how many calories you burn while engaging in various activities. There are some foods that typically have more calories than others, such as fatty, fried, or processed foods. Other foods, like fresh fruit and vegetables, typically have fewer calories. While low-calorie foods like diet soda have no nutritional value, some healthy fruits and vegetables can have a high calorie content. We require calories to provide us with the necessary energy to move around, stay warm, develop, work, think, and play. Even our blood circulation and digestion require the energy obtained from calories to operate properly.
Learn more about calories here:
https://brainly.com/question/16473326
#SPJ4
except for the transition and inner transition metals, the octet rule applies to all other elements. true false
False, except for the transition and inner transition metals, the octet rule is not applicable to all other elements.
An element is a substance that can not be damaged down into a simpler layout. They may be distinguished by means of a completely unique atomic range. The elements are organized via their atomic variety in the periodic table, which highlights elements with similar residences.
Carbon is the most important detail of existence. Without this detail, existence, as we are aware of it, might not exist. As you will see, carbon is a vital element in compounds essential for lifestyles.
Kinds of elements :
1.) The elements are categorized as metallic, non-metal, and metalloid.
2.) The intense left aspect factors inside the periodic desk are metals, for example, sodium, calcium, cesium, and many others.
3) Elements on the right side are usually known as non-metals, carbon, chlorine, oxygen, and many others.
Learn more about Element here:-https://brainly.com/question/20096027
#SPJ4
How does the strength of the imfs in water compare to the strength of the imfs in ethanol?.
The chemical formula for water is H2O. A water molecule consists of one oxygen atom bonded to two hydrogen atoms. Oxygen is more electronegative than hydrogen, meaning it has a higher tendency to attract electrons. This creates a partial negative charge on the oxygen end of a water molecule. The hydrogen ends of the molecule develop a partial positive charge. Ethanol is made up of two carbon atoms, six hydrogen atoms and one oxygen atom. Its chemical formula is CH3CH2OH. Ethanol contains a hydroxyl group, which is an oxygen atom bonded to a hydrogen atom. Just like in water, this bond between oxygen and hydrogen is partially negative at the oxygen end and partially positive at the hydrogen end.
Water has strong intermolecular forces (hydrogen bonds). Ethanol (CH3CH2OH) have hydrogen bonds but these are slightly weaker than the hydrogen bonds in water.
Learn more about hydrogen bonding here ; brainly.com/question/15099999
#SPJ4
determine the volume of so2 (at stp) formed from the reaction of 96.7 g of fes2 and 55.0 l of o2 (at 398 k and 1.20 atm). the molar mass of fes2 is 119.99 g/mol.
The reaction between 96.7 g of fes2 and 55.0 l of o2 produced the volume of so2 (at stp) (at 398 k and 1.20 atm). Fes2's molar mass is 119.99 g/mol, which is equivalent to 32.94 L.
FeS2 weighs 96.7 g.
0.806 mol of FeS2 is equal to 96.7 g of mass divided by 119.99 g of molar mass.
----------------
Given 55.0 L of oxygen. We need to find the volume of Oxygen at STP as we need to determine the volume of SO2 at STP.
Hence, we use the equation, P1V1/T1 = P2V2/T2
(1.20 x 55.0) / 398 = (1.0 x V2) / 273
V2 = 45.27 L
Thus, volume of oxygen = 45.27 L
----------------------
Now, we need to find moles of oxygen using the equation PV = nRT
(1.0 x 45.27) = n (0.0821 x 273)
n = 2.02 mol
-------------------
Thus, the reactants we have are
Moles of FeS2 = 0.806 mol
Moles of oxygen = 2.02 mol
Now, we need to find the limiting reagent. In order to find the limiting reagent we need to divide the moles we found with the respective stoichiometric coefficients.
Thus, moles of FeS2 = 0.806 mol / 4 = 0.2015 mol
Moles of O2 = 2.02 mol / 11 = 0.184 mol.
As, the moles of O2 are less than that of FeS2, O2 is the limiting reagent.
Hence, we use moles of O2(2.02 mol) to find the SO2 produced.
From the chemical equation, it is clear that 11 mol of O2 produces 8 mol of SO2.
Thus, 2.02 mol of O2 produces = (2.02 mol O2) x (8 mol SO2 / 11 mol O2) = 1.47 mol of SO2
Using PV = nRT, let us find volume of SO2.
(1.0)(V) = 1.47 x 0.0821 x 273
V = 32.94 L of SO2 is produced.
learn more about fes2 here:
https://brainly.com/question/15583224
#SPJ4
a. consider the molecule pentane. i. how many carbon atoms does this molecule have? (1 point) ii. what kinds of bonds does it have? (1 point)
Five carbon atoms make up the chemical pentane, which also contains one type of covalent bond and five carbon atoms.
What is atom and example?The quantity of protons an atom has makes it distinct from other atoms. Consequently, a particle devoid of proton not an atom. But even a single proton constitutes a atom (of hydrogen). Single particles of the periodic table elements like sodium, plutonium, argon, and chlorine are examples of atoms.
How is an atom formed?Atoms are made up of a nucleus in the middle that is surrounded by protons, neutrons, and electrons. Uranium is split into smaller atoms during the fission process, creating new atoms. Event such as the Big Bang or Supernova serve as instances .
To know more about atom visit:
brainly.com/question/1566330
#SPJ4
one mole of oxygen expands at constant temperature of 310 k from 12 l to 19 l. how much work in joules is done by the expanding gas?
one mole of oxygen expands at constant temperature of 310 k from 12 l to 19 l. Work in joules is done by the expanding gas is 1180 j.
How to calculate ?W for isothermal expansion
W=nRT ln (Vf/VI)
W= (1 mole)(8.31J/mole K)(310K) ln(19/12)
W=1180j
What is Ideal Gas Law ?An ideal gas is one in which there are no intermolecular attraction forces and all collisions between atoms or molecules are entirely elastic. It can be seen as a group of perfectly hard spheres that collide but do not otherwise interact with one another. All of the internal energy in such a gas is kinetic energy, and any variation in internal energy causes a variation in temperature.
What are the characteristics of ideal gas law ?Three state variables—absolute pressure (P), volume (V), and absolute temperature—can be used to describe an ideal gas (T). Kinetic theory can be used to infer the link between them, which is known as the
PV = nRT = NkT
n = number of moles
R = universal gas constant = 8.3145 J/mol K
N = number of molecules
k = Boltzmann constant = 1.38066 x 10-23 J/K = 8.617385 x 10-5 eV/K
k = R/NA
NA = Avogadro's number = 6.0221 x 1023 /mol
Learn more about ideal gas law visit :
https://brainly.com/question/28257995
#SPJ4
The following are the steps involved in transmission at a Cholinergic synapse. 1. Chemically regulated sodium channels on the postsynaptic membrane are activated. 2. Calcium ions enter the synaptic knob. 3. Acetylcholine is degraded by acetylcholinesterase. 4. An action potential depolarizes the synaptic knob at the presynaptic membrane. 5. The synaptic knob reabsorbs choline. 6. Acetylcholine is released from storage vesicles by exocytosis. 7. Acetylcholine binds to receptors on the postsynaptic membrane. 8. Calcium ions are removed from the cytoplasm of the synaptic knob. The correct sequence for these events is: A) 4,2,6,7,1,8,3,5. B) 4,2,6,7,8,5,3,1. C) 2,4,6,7,1,8,3,5. D) 6,4,2,7,1,8,3,5. E) 2,5,4,6,7,1,8,3
The correct sequence of the events is a)4,2,6,7,1,8,3,5
Cholinergic synapse is a type of chemical synapse that uses acetylcholine (ACh) as its neurotransmitter. This type of synapse is found in the peripheral and central nervous systems and is responsible for the transmission of signals between neurons and other cells. The following steps are involved in cholinergic synapse:
a. Release of Acetylcholine: Neurotransmitter Acetylcholine is released from the presynaptic neuron into the synaptic cleft. This release is regulated by calcium ions and the neurotransmitter is packaged into vesicles which are then transported to the release sites.
b. Binding of ACh to receptors: The released ACh diffuses across the synaptic cleft and binds to postsynaptic receptors on the target cell. This binding triggers a cascade of events in the target cell.
c. Postsynaptic responses: The binding of ACh to postsynaptic receptors triggers a variety of responses in the target cell. These responses include the opening of ion channels, the release of additional neurotransmitters, and the activation of second messenger systems.
d. Inactivation of ACh: After the postsynaptic responses have been carried out, the ACh molecule is inactivated by acetylcholinesterase (AChE). This enzyme breaks down ACh into its component parts, which are then recycled or degraded.
e. Reuptake of ACh: The released ACh is also taken up by the presynaptic neuron for reuse. This process is known as reuptake and helps to regulate the amount of ACh in the synaptic cleft.
By following these steps, the cholinergic synapse is able to transmit signals from one neuron to another. This process is essential for the normal functioning of the nervous system.
Hence the correct option is A)
To know more about neuro-transmitters, click below:
https://brainly.com/question/26387085
#SPJ4
both have polar interiors and nonpolar surfaces. on a micelle, the nonpolartails of the fatty acid salts face outwards into the aqueous environment, similar to the blank amino acid side chains on the globular protein. the polarheads of the fatty acid salts gather together in the interior of the micelle just as the blank amino acid side chains gather in the interior of the globular protein.
The structure of a soap micelle similar to the structure of a globular protein because both have polar interiors and nonpolar surfaces. on a micelle, the nonpolartails of the fatty acid salts face outwards into the aqueous environment, similar to the nonpolar tails amino acid side chains on the globular protein. the polarheads of the fatty acid salts gather together in the interior of the micelle just as the nonpolar amino acid side chains gather in the interior of the globular protein.
Colloids that form micelle are linked together and arranged radially. At low concentrations, they act as strong electrolytes as they should, but at greater concentrations, they act like colloidal particles. Up to 100 molecules or more may be present in micelle. For instance, soap releases sodium and stearate ions as it dissolves in water.
The form of the 3D molecular structure of globular protein can range from a sphere to a cigar. A globular protein's structure typically consists of three or four layers. Simple amino acid sequences that create peptide chains make up the fundamental structure.
Learn more about globular protein here:
https://brainly.com/question/28835340
#SPJ4
Provide a detailed procedure for the conversion of a tertiary alcohol to an alkyl halide via a SN1 reaction. Compare (and explain) the difference in reaction mechanism when primary alcohols are used instead of a tertiary alcohol. All chemical structures should be hand drawn. You can add images into your responses by clicking on the icon that looks like a mountain landscape. Cut and paste text/figures will not be graded.
While secondary and tertiary alcohols react using the elementary SN1 mechanism, where no carbocation is created, primary alcohols react using the SN2 mechanism, which entails the production of a carbocation.
What distinguishes a primary alcohol from a tertiary alcohol?You can tell the type of alcohol by looking at the carbon atoms connected to OH.The alcohol is classified as primary, secondary, or tertiary depending on the number of carbons that are connected to that carbon.
Why does secondary alcohol have a lower reactivity than primary alcohol?Alkyl groups in tertiary alcohols supply the oxygen of the alcohol with electron density, which lessens the alcohol's acidic intensity.Thus, as the number of alkyl groups attached to a alcohol functional group on carbon grows, the acidity of alcohol decreases.
To know more about SN1 reaction visit:
https://brainly.com/question/10666011
#SPJ4
A chunk of dry ice, solid co2, disappears after sitting at room temperature for a while. There is no puddle of liquid. What happened?.
A piece of dry ice, which is solid CO2, vanishes after some time at normal temperature. There is no liquid puddle. The CO2 gas solidified.
How does dry ice function and what is it?Carbon dioxide freezes into a substance called dry ice. Carbon dioxide travels directly from a gas to a solid rather than first becoming a liquid and then a solid. As a result, whenever it melts, gas is created as well.
What is the real purpose of dry ice?Typically, dry ice is utilized in industry for tasks like blasting, preserving frozen goods, and transporting drugs. In addition, dry ice is employed in our daily lives for a variety of other things, such as producing special effects for movies and events.
To know more about dry ice visit:
https://brainly.com/question/13972158
#SPJ4
mevalonate exists in equilibrium with compound x in aqueous solution. what is the structure of compound x?
Mevalonate exists in equilibrium with compound x in aqueous solution. the structure of compound x is a six membered ring.
The six membered is thermodynamically more stable so, the compound formed is six membered ring is more favorable. the both the four membered and the peroxide are the high energy species. so, these are not able to form stable molecule as mevalonate. mevalonic acid is the organic compound discussed in the biochemistry. mevalonic acid contains the -CO₂H and -OH groups.
Thus , for the mevalonate exits is in the equilibrium compound x and the compound x is called the six membered ring.
To learn more about compound here
https://brainly.com/question/7285058
#SPJ4