What emerging technologies will make electrical energy safer, more usable, more efficient, cleaner?

Answers

Answer 1

Answer:

Technion - photovoltaic cell efficiency

A team of researchers at Israel's Technion research university has created new photovoltaic technology to harness lost radiation and convert it into energy, boosting solar cell efficiency from 30 to 50 percent.

Explanation:


Related Questions

if a load has a resistance of 5 ohms, how much current will it draw from a 120-volt power supply?

Answers

Use the V= IR formula
120 V = I (5 ohms)
I = 120 V/5 ohms
I = 24 Amps

State three means of operating a power tool

Answers

Another way to consider power tools is by the energy they use to function. Power tools usually run on one of three types of power: compressed air, electricity, or combustion.

Answer:

answer is given below

Explanation:

Power tools usually run on one of three types of power: compressed air, electricity, or combustion.

how to clean corroded battery terminals in electronics

Answers

Try dipping a cotton swab in white vinegar and wiping directly on the corroded area

what factors need to be considered when building housing on a waterway

Answers

Answer:

Flooding

Explanation:

.

When building housing on a waterway one must always consider the factor of Flooding and its repercussions.

What is a Flood?

A flood occurs when there is an excessive amount of water and it covers normally dry areas. The word can also refer to the tide's influx when used in the sense of "flowing water." Floods are a topic of research in the hydrology field and are very important to the fields of agriculture, civil engineering, and public health.

Floods have serious societal repercussions for both communities and people. As most people are well aware, flooding has a number of direct effects, including the loss of life, destruction of property, loss of crops and livestock, and worsening of health due to waterborne infections.

Stream gauges that are put in bodies of water close to inhabited areas are used to measure floods. The National Weather Service receives all data collected by them before it is sent to the United States Geological Survey (USGS), which erected and operates them (NWS)

To read more about Floods, refer to - https://brainly.com/question/28725721

#SPJ2

PDA is an abbreviation for professional diagnostic assistant

True or false

Answers

Answer:

False

Explanation:

It means Public Display of Affection

All of the following are benefits of consuming complex carbohydrates, EXCEPT:

Answers

complez carbs have fiber and starch

Answer:

spikes blood sugar quickly is something it doesn't help with

Explanation:

complex-are starches and dietary fibers. They include whole grains such as wheat, barley, bulgar, rye, millet, oats, pasta, rice and legumes. Carbohydrates are our main source of energy. About 50%-60% of your plate at each meal should be composed of carbohydrates. Besides supplying you with long-lasting energy, carbohydrates also supply other nutrients such as vitamins, minerals and protein.

What elements do architects use in their design work to make buildings that encourage people's positive needs

Answers

Answer:

Form/Formal Elements

Explanation:

This should be the correct answer i dont know if im fully correct.

These components are arranged in the order in which a single point becomes a one-dimensional line, a line becomes a two-dimensional plane, and eventually a plane becomes a three-dimensional volume.

What element  do architects use in their design work?

Points, lines, planes, and volumes make up the main components of form, each one developing from the last.

A line is an extension of a point, which is a location in space. A line's extension is referred to as a surface or plan. A plane is stretched into a volume.

In all eras of society, the hearth served as the sacred center around which structure and order were given. It is the foundational and most significant part of architecture.

Therefore, Form/Formal Elements do architects use in their design work to make buildings that encourage people's positive needs.

Learn more about architects here:

https://brainly.com/question/28678154

#SPJ2

if we model the vibrating system as a mass on a spring, what is the mass necessary to achieve the desired resonant frequency when the tip is not interacting with the surface?

Answers

Answer:

2.5 micrograms

Explanation:

The frequency of a vibrating body reduces with increasing mass, but increases with increasing tension.

What is the relation of resonant frequency with mass?

For a spring-mass system, the relationship between frequency and mass can be expressed as follows: as mass increases, frequency decreases; as mass decreases, frequency increases.

The frequency in this case is f, and the mass is m. The relationship between mass and frequency is therefore inverse.

Precession frequency drops when mass is doubled, since angular momentum also doubles at this point. As the radius grows, the angular momentum increases and the precession frequency decreases.

Mass and stiffness are two well-known factors that affect an object's resonance frequency.

While stiffness limits low-frequency transmission because less elastic, or stiff, materials vibrate at higher frequencies, mass limits high-frequency transmission because larger objects vibrate at lower frequencies.

Therefore, The resonant frequency should rise as mass decreases.

Learn more about frequency here:

https://brainly.com/question/13191113

#SPJ5

Which of the following is a type of Interior door?

Answers

Answer:

There is no answers given

Explanation:

No answer choices but could your answer be double-action?

A person’s ability to use understand and relate to technology is known as :

A: Technology literacy

B: computer literacy

C: Technology knowledge

D: computer comprehension

Pick one out of those please

Answers

Answer:

A: Technology literacy

I took a computer class in the 8th grade.

Explanation:

hope this helps. . . <3

good luck!    uωu

Some aluminum casting alloys can be heat-treated after casting for added strength. Group of answer choices False True

Answers

some casting alloys can be heat-treated after casting for added strength, True

Which type of valve is required on the suction side of the fire pump, allowing the pipe to be open to the full diameter of water flow

Answers

Answer:

Gate Valve

Explanation:

On diesel engines, data from ________ sensors are commonly used to adjust exhaust gas recirculation (EGR) rates.

Answers

Answer:

Air mass sensors is the right answer i think

Explanation:

Always report damage tools to the

Answers

Answer:

Tool enginear??????

Explanation:

sorry for wrong spellin

Answer:

   

Explanation:

How do we infer that there is
something stopping civilizations from
progressing beyond where we, humans,
are now?

Answers

Answer:

Not too far removed from Collingwood’s concern with the elimination of physical and moral force via social civilization are accounts of civilized society concerned with the management of violence, if only by removing it from the public sphere. Such a concern is extended in Zygmunt Bauman’s account of civilization to the more general issue of producing readily governable subjects. The “concept of civilization,” he argues, “entered learned discourse in the West as the name of a conscious proselytising crusade waged by men of knowledge and aimed at extirpating the vestiges of wild cultures” (1987, 93).

This proselytizing crusade in the name of civilization is worth considering further. Its rationale is not too difficult to determine when one considers Starobinski’s (1993, 31) assertion: “Taken as a value, civilization constitutes a political and moral norm. It is the criterion against which barbarity, or non-civilization, is judged and condemned.” A similar sort of argument is made by Pagden (1988, 33), who states that civilization “describes a state, social, political, cultural, aesthetic—even moral and physical—which is held to be the optimum condition for all mankind, and this involves the implicit claim that only the civilized can know what it is to be civilized.” It is out of this implicit claim and the judgments passed in its name that the notion of the “burden of civilization” was born. And this, many have argued, is one of the less desirable aspects and outcomes of the idea of civilization

What is true about a point and shoot camera?


They always have lenses u can take on and off


They are often smaller than SLR cameras

They are used by professionals more often that SLR cameras

All of the above

Answers

Answer:

What is true about a point and shoot camera?

They are often smaller than SLR cameras

Answer:

They are often smaller than SLR cameras

Explanation:

Please help me. I have no idea what I'm doing.​

Answers

A.an internationally standard used to measure a physical quality

Answer:

a

Explanation:

is there water on mars

Answers

Answer:

nope, it is phsically impossible for water to be on mars

Explanation:

Technician A says that a fully charged battery is less likely to freeze than a discharged battery. Technician B says that the state of charge has no impact on freezing. Who is correct

Answers

Answer : Technician B is correct

A resistance of 30Ω is placed in a circuit with a 90 volt battery. What current flows in the circuit?

Answers

V=IR
90=I x 30
90/30= I
Current = 3A

The form of energy delivered to an electrical generating turbine in a geothermal facility is in the form of ________.

Answers

Geothermal energy is a product of the heat of Earth's molten interior. The form of energy delivered to an electrical generating turbine in a geothermal facility is in the form of hot water or steam.

Geothermal energy is gotten so as to generate electricity. This is done when water is injected deep underground and it then comes back as steam or hot water.

This is then converted to steam so as to drive a turbine on an electric power generator. The plants makes use of steam to produce electricity.

There are three main types of energy for electricity generation. They are fossil fuels which is made up of coal, natural gas, and petroleum, and then nuclear energy, and renewable energy sources.

Learn more from

https://brainly.com/question/24161565

How to handle or hold sharp edged tools in welding

Answers

Answer: I got you bestie :)

When walking with a sharp tool, the tool should be carried with the blade down and away from the body. When climbing with a sharp tool, tool belts, or buckets with hand lines should be used so workers can have both hands to grip the ladder.

Answer:

sharp egdes should be held far from the body just in case you fall you won't really get cut by it

Explanation:

thanks for the points

How do people put virus

Answers

Tttttttttttgg tee-shirt ye JJ yeesh yesterday ask

Answer:

Explanation:

Don’t know

Manufacturers measure optical disc drives relative to the original speed, using an X to denote a transfer rate of ______ KBps

Answers

Answer:

5 kbps

Explanation:

Global climate and weather patterns are driven by differences in the amount of heat energy in different areas of the earth. Which statment best explains why different areas of the earth have different amounts of heat energy

Answers

The Earth receives different amounts of solar energy in different regions.

Fill in the blank with the correct response.

__________involves gathering and analyzing information related to the terrain and environment of enemy forces.

Answers

Answer:

Intelligence

Explanation:




What is the difference between bare and
shielded electrodes

Answers

Answer:

shielded electrodes give metal smotth and clean welds and bare electrodes reduces spattering.

Explanation:

Shielded electrodes minimize sulfur, oxides, and other types of impurities within the base metal to give regular, smooth, and clean welds while bare electrodes,  makes welding more manageable and reduces spattering

Shielded electrodes minimize sulfur, oxides, and other types of impurities within the base metal to give regular, smooth, and clean welds. These coated electrodes also produce a more stable electric arc compared to bare electrodes, which makes welding more manageable and reduces spattering.

Technician A says a typical Manifold Absolute Pressure (MAP) sensor can be connected directly to the intake manifold or connected through a vacuum hose. Technician B says most modern MAP sensors do not use a flexible silicon chip within a chamber anymore. Who is correct

Answers

Answer:

the correct answer is: technician A

Explanation:

this answer is taken directly from the book

One method of determining engine load is through the use of a manifold absolute pressure (MAP) sensor. The MAP sensor can be either directly bolted to the intake manifold or connected through a vacuum hose.

Most modern MAP sensors use a type of flexible silicon chip within a sealed chamber; the chip changes resistance when manifold pressure flexes the chip.

what is the first step of the engineering design process?

Answers

Answer:

The first step  is to identify the need and constraints

Explanation:

Please help meeeplzzzzzz

Answers

Answer:

labelled diagram for combination wrench

Other Questions
Write a story with the ending (......and I never made mistakes again) 7,200 divided by 10 to the power of 2 Epicontinental seas have occurred in the past when Choose one: A. sea levels were lower. B. sea levels were higher. C. continental shelves were exposed. D. low tides were higher. Why america become top 1 most wasteful country? what was the first u.s. state to adopt an official sport? You have a patient that has been suffering from an infectious disease for two years. The infection is characterized by fluctuating symptoms with acute symptoms that periodically resolve. Based on the information presented, which statement best describes this infection It is good that both parents in a family join the workforce. What are the advantages? what is 6/2(1+2)=?give with expiation Researchers will conduct a study of the television-viewing habits of children. They will select a simple random sample of children and record the number of hours of television the children watch per week. The researchers will report the sample mean as a point estimate for the population mean. Which of the following statements is correct for the sample mean as a point estimator?(A) A sample of size 25 will produce more variability of the estimator than a sample of size 50.(B) A sample of size 25 will produce less variability of the estimator than a sample of size 50.(C) A sample of size 25 will produce a biased estimator, but a sample size of 50 will produce an unbiased estimator.(D) A sample of size 25 will produce a more biased estimator than a sample of size 50.(E) A sample of size 25 will produce a less biased estimator than a sample of size 50. RIDDLE TIME!!!!I walk but have no legsi fly but have no wingsi eat but i dont have a mouthwhat am i? Paano nakakatulong ang globalisasyon sa ating pamumuhay? Helpppp adapppppopppppp they overcame by the blood of the lamb and the word of their testimony please help me in questions 16 and 17 only and ill mark you as brainliest i promise Which of the following is a fundamental unit of the SI system of units?A) kilometerB) jouleC) kilogramD) gramE) newton How many total bonds (Total shared pairs) are in the lewis structure for HSiN and CO2? Help me please with Spanish!number 5 and 7 its urgent please. my assignment is due in like 30 minutes When electricity runs through an electric stove, what other type of energy is produced? A. heat energy B. sound energy C. chemical energy D. mechanical energy Help please, this is for 100 points!!