Answer: Metallic Bonding.In metallic bonds, the valence electrons from the s and p orbitals of the interacting metal atoms delocalize. That is to say, instead of orbiting their respective metal atoms, they form a “sea” of electrons that surrounds the positively charged atomic nuclei of the interacting metal ions.
Explanation:
Which electron dot diagram represents H2?
Answer:
H:H
Explanation:
Spheres of Earth Assignment Active Analyzing Sphere Interactions Explain how Earth's spheres may be affected by the droughts brought on by El Niño. Sometimes, the surface of the Pacific Ocean warms up, causing changes in the weather in some areas. This phenomenon is called El Niño. El Niño causes the amount of rainfall in some parts of the United States and South America to increase. It also causes droughts to occur in Southeast Asia and Australia. Droughts occur when an area receives less rain than it normally does over a certain period.
help me on this question please. it is 7th grade science
A sample is in the second half-life. What percent of the sample is stable at this point?
A. 12.5%
B. 25%
C. 50%
D. 75%
Answer:
75%
Explanation:
on edg :)
HELP FAST! PLEASE
This is due in 4 hrs!!!!! Ahhhh
The amplitude is greater for both
The frequency is for wave two
Explanation:
What ratio of concentration of ammonia and ammonium chloride should be mixed to
prepare a buffer solution of pOH 5? (Kb for NH3 =1.8 x 10-4)
The ratio of concentration of ammonia and ammonium chloride : 0.05
Further explanationGiven
pOH=5
Kb for NH3 =1.8 x 10-4
Required
The ratio of concentration of ammonia (NH₃) and ammonium chloride(NH₄Cl)
Solution
Solutions containing ammonia and its salt: ammonium chloride are called alkaline buffers
Can be formulated : ( for the same of the volume, mol=concentration)
[tex]\tt \displaystyle [OH-]=Kb\times\frac{weak\:base\:mole}{salt\:mole\times valence}[/tex]
pOH=-log [OH⁻]
pOH=5⇒[OH⁻]=10⁻⁵
Valence for NH₄Cl = 1, so the concentration ratio :
[tex]\tt 10^{-5}=1.8\times 10^{-4}\times \dfrac{[~NH_3]}{[NH_4Cl]}\\\\0.05=\dfrac{[~NH_3]}{[NH_4Cl]}[/tex]
4.which is a product of the process shown above?
a. carbon dioxide
b. sugar
c. sunlight
d. water
5.where does the energy that drives this process come from?
a. oxygen
b. sugar
c. sunlight
d. water
Answer:
4. b 5.C
Explanation:
Photosynthesis makes sugar for plants and sunlight is the energy used to convert CO2 and water into glucose
The product of the process of photosynthesis is sugar and the energy to dive the process of photosynthesis comes from sunlight.
What is photosynthesis?Photosynthesis is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy through the process of cellular respiration.
Some of the energy which is converted is stored in molecules of carbohydrates like sugar and starches which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.
The process begins with proteins absorbing light energy which are called reaction centers and contain a green pigment which is called chlorophyll . In plants ,these pigments are present inside organelles called chloroplasts while in bacteria they are present in plasma membrane.
Learn more about photosynthesis,here:
https://brainly.com/question/26494694
#SPJ2
How many grams are in 2.3 x 1024 formula units of KNO3?
390 g KNO₃
General Formulas and Concepts:ChemistryAtomic Structure
Reading a Periodic TableUsing Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.MathPre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to Right Explanation:Step 1: Define
2.3 × 10²⁴ formula units KNO₃
Step 2: Identify Conversions
Avogadro's Number
Molar Mass of K - 39.10 g/mol
Molar Mass of N - 14.01 g/mol
Molar Mass of O - 16.00 g.mol
Molar Mass of KNO₃ - 39.10 + 14.01 + 3(16.00) = 101.11 g/mol
Step 3: Convert
[tex]2.3 \cdot 10^{24} \ formula \ units \ KNO_3(\frac{1 \ mol \ KNO_3}{6.022 \cdot 10^{23} \ formula \ units \ KNO_3} )(\frac{101.11 \ g \ KNO_3}{1 \ mol \ KNO_3} )[/tex] = 386.172 g KNO₃
Step 4: Check
We are given 2 sig figs. Follow sig fig rules and round.
386.172 g KNO₃ ≈ 390 g KNO₃
HELP ASAP DUE IN 5 MINUTES WILL GIVE BRAINLIEST
Energy is conserved within a system, meaning that forms of energy are either transferred or transformed as they interact with objects. Which of the statements below correctly describe how energy is transferred or transformed in daily life?
Group of answer choices
Kinetic energy transforms into thermal energy when a heating pad is turned on.
Electrical energy is transferred into light energy so that a flashlight generates light when it’s turned on.
Chemical energy in food is transformed into mechanical energy as our body rides a bicycle down the street.
Nuclear energy is transferred to electrical energy to provide electricity for our homes.
Answer:
i do believe it is C. Chemical energy in food is transformed into mechanical energy as our body rides a bicycle down the street. but if i am wrong plz don't come at me but i believe that is right
Explanation:
Answer:
i do believe it is C. Chemical energy in food is transformed into mechanical energy as our body rides a bicycle down the street. but if i am wrong plz don't come at me but i believe that is right
Explanation:
How are the three intermolecular forces related?
Explanation:
Intermolecular forces are electrostatic in nature and include van der Waals forces and hydrogen bonds. ... The three major types of intermolecular interactions are dipole–dipole interactions, London dispersion forces (these two are often referred to collectively as van der Waals forces), and hydrogen bonds.May 20, 2018
which event would most likely lead to a thunderstorm giving brainliest
Answer:
A
Explanation:
Took at test on this and my teacher said it was right, hopefully I remembered right, also I answered ur other question like this I think lol
How many moles of copper are in 6,000,000 atoms of copper?
Answer: There will be 9.9632 × 10⁻¹⁸ moles of Copper in 6,000,000 atoms of Copper.
Plz help
Plz and thank u
Please help....thank you
Answer:
a. volcanic changes create new land
please help me i will give brain list
Answer:
a. pentane = C5H12
b. Heptane = C7H16
c. Hexyne = C6H10
d. Octene = C8H16
e. Nonane = C9H20
Hope it helps.
1-pentene
Molecular Formula C5H10
Condensed Structural FormulaCH2=CH(CH2)2CH3
Melting Point (°C)–138
Boiling Point (°C)30
2- heptane is the straight-chain alkane with the chemical formula H3C(CH2)5CH3 or C7H16, and is one of the main components of gasoline (petrol).
In the reaction C + O2 → CO2, 18 g of carbon react with oxygen to produce 72 g of carbon dioxide. What mass of oxygen would be needed in the reaction?
18 g
54 g
72 g
90 g
Answer:
54g of O2 reacted in the reaction
Answer:
54g
Explanation:
how dose dissolving sugar in water show that matter is made up of particles
Answer:
When sugar dissolves, the sugar particles separate from each other and mix with the water particles. When the sugar particles separate, the smaller water particles fit into the spaces between the larger sugar particles. The water and sugar particles are attracted to each other, so they move closer together when they mix.
Explanation:
: )
fill in the blank please
amino acids as _____ are to words
Answer:
Sentences are where there is a beginning and an end of a section of a paragraph. Letters are individual parts of sentences.
The answer that would make the MOST sense would be SENTENCES
which event would most likely lead to a thunderstorm HELP GIVING BRAINLIEST
Answer:
A
Explanation:
i got right
. A student adds 50 mL of Lead (II) Nitrate solution to 50 mL of potassium iodide. Each
solution is colorless, but when these two liquids are mixed, a yellow precipitate is
observed. What has most likely happened in the experiment?
Answer:
after the reaction between Lead (II) Nitrate solution and potassium iodide occur Lead(II) iodide was formed and it's yellow color.
Explanation:
Pb(NO3)2 + KI = KNO3 + PbI2
Your skin is an important organ and has several functions. All of the functions below are performed by the skin EXCEPT
A)
makes vitamin D.
B
prevents-dehydration:
C)
maintains body temperature.
D)
works with bones to help you move.
Answer:D
Explanation:
Your skin makes vitamin D
Your skin prevents dehydration
And your skin maintains body temperature. So you are left with D
Answer:
The correct option is D.
works with bones to help you move
Explanation:
Skin is the outer layer of the body and it is the body's largest organ.
It protect the body from heat and other harmful substances.
It is comprises of three layers;
The Epidermis which is the outer layer.
The dermis which is a fibrous later that protect the Epidermis.
The subcutis is the subcutaneous layer that is beneath the dermis.
Function of the skin.
1. It's regulate body temperature
2. It's protect the body from heat and pathogenic entry.
3. It produces vitamin D
4. The skin allow sensations or feelings of touch, heat, and cold.
Therefore;
works with bones to help you move is wrong because it is the muscle that work with the bone.
about how much of the visible side of the moon is lit up during a full moon?
A. Three fourths
B. One fourth
C. None of it
D. All of it
Answer:
D
Explanation:
i learned this in elementary
Rosie balanced the equation below with the lowest coefficients, however she made a mistake.
2 AgCl + 2 Mg(NO3)2 --> 1 AgNO3 + 2 MgCl2
What was her error and what should the correct answer be?
Answer:
2 AgCl + Mg(NO3)2 --> 2AgNO3 + MgCl2
Explanation:
This is balanced equation
Two models of the same compound are shown.
On the left labeled Model A 2 large overlapping black spheres with 3 small blue spheres overlapping the rear black sphere and 2 medium red spheres overlapping the front black sphere. One of the red spheres has a small blue sphere overlapping it. On the right labeled Model B 2 C's connected by a black line. The C on the left has 3 H's attached by 1 black line each and the C on the right has 2 Os attached to it. The top O is attached by 2 black lines and the bottom O by 1 black line. The bottom O also has an H attached to it by 1 black line.
In what way is Model A better than Model B?
Model A shows the types of elements in the compound, but Model B does not.
Model A shows the total number of atoms in the molecule, but Model B does not.
Model A shows the three-dimensional shape of the molecule, but Model B does not.
Model A shows the number of atoms of each element in the molecule, but Model B does not.
Answer: C. Model A shows the three-dimensional shape of the molecule, but Model B does not.
Explanation:
i took the test and it makes the most sence for the modeles.
How many moles are in 3.4 x 10-7 grams of Silicon dioxide, SiO2?
Answer:
Number of moles = 0.057 × 10⁻⁷ mol
Explanation:
Given data:
Mass of SiO₂ = 3.4 × 10⁻⁷ g
Number of moles = ?
Solution:
Number of moles = mass/molar mass
Molar mass of SiO₂ = 60 g/mol
by putting values,
Number of moles = 3.4 × 10⁻⁷ g / 60 g/mol
Number of moles = 0.057 × 10⁻⁷ mol
you have a friend who is using a recipe for flat from american cookbook you notice that he set your over temperature at 175F° what you advise him to do?
Answer:
I will give them advice, that do the power of flame low....
Explanation:
thanks.
A saturated hydrocarbon having molecular formula CnH2n+2 diffuses through a porous membrane twice as fast as sulphur dioxide. Calculate the volume occupied by the hydrocarbon at27°C and 2atm ?
Help me fast !
Answer:
12.3 L
Explanation:
Now we have that the rate of diffusion of the saturated hydrocarbon is R1
Rate of diffusion of sulphur dioxide is R2
Molar mass of hydrocarbon is M1
Molar mass of sulphur dioxide is 64 gmol-1
From Graham's law;
R1/R2 = √64/M1
2/1 =√64/M1
(2/1)^2 = (√64/M1)^2
4/1 = 64/M1
4M1 =64
M1 = 16
To obtain the number of moles of the gas;
(n*12) + (2n + 2) 1 = 16
12n + 2n + 2 = 16
14n + 2 = 16
14n = 16 - 2
n = 14/14
n = 1
Hence the hydrocarbon is CH4
Volume occupied by CH4 at STP = 22.4 L
Hence;
P1 = 1 atm
T1 = 273 K
V1 = 22.4 L
T2 = 300 K
P2 = 2 atm
V2 = ?
P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2 = 1 * 22.4 * 300/2 * 273
V2 = 12.3 L
The volume occupied by the hydrocarbon at 27 °C and 2 atm is 12.31 L
Let the hydrocarbon be initially at standard temperature and pressure (STP)
Thus, we can obtain the new volume of the hydrocarbon by using the combined gas equation as illustrated below:
Initial volume (V₁) = STP = 22.4 L Initial pressure (P₁) = STP = 1 atmInitial temperature (T₁) = STP = 273 KFinal temperature (T₂) = 27 °C = 27 + 273 = 300 KFinal pressure (P₂) = 2 atmFinal volume (V₂) =?P₁V₁ / T₁ = P₂V₂ / T₂
(1 × 22.4) / 273 = (2 × V₂) / 300
22.4 / 273 = (2 × V₂) / 300
Cross multiply
273 × 2 × V₂ = 22.4 × 300
546 × V₂ = 6720
Divide both side by 546
V₂ = 6720 / 546
V₂ = 12.31 L
Thus, the volume occupied by the hydrocarbon at 27 °C and 2 atm is 12.31 L
Learn more about gas laws:
https://brainly.com/question/25967416
How is the kinetic energy of the particles of a substance affected during a phase change?
A.) Kinetic energy increases during exothermic changes and decreases during endothermic changes.
B.) Kinetic energy decreases during exothermic changes and increases during endothermic changes.
C.) Kinetic energy does not change, but the potential energy does.
D.) Kinetic energy changes in the opposite way that the potential energy changes.
Answer: A. Kinetic energy increases during exothermic changes and decreases during endothermic changes
Explanation: During an exothermic change potential energy is converted to kinetic energy. I hope this is correct. :)
Answer:
C
Explanation:
What would have a higher boiling point water or hydrocarbon ( from penny liquid stacking)
Answer:
Im pretty sure its hydrocarbon
Explanation:
Elisa feels tired because she has a condition that affects whether the right molecules are getting to her cells. If her body were functioning correctly, this is what would happen with oxygen:
Answer:
It would be working properly and providing her energy for her daily activities.
Explanation:
Hello!
In this case, since her oxygen is actually working properly, it is going to be travelling throughout her entire body (via blood) and therefore carbon dioxide would be released as the exhalation product due to cellular respiration carried out in the alveoli which provides energy for her daily activities.
However, the intrusion of different molecules to oxygen into her cells may affect the rate at which cellular respiration is carried out and therefore she may feel tired because such process provides energy to the body.
Best regards!
What else is produced when sodium carbonate decomposes?
Na2Co3 - Na2O+
Answer:When a single compound breaks down into two or more compounds or elements in a chemical reaction then it is known as decomposition reaction.
The chemical symbol for sodium carbonate is .
The decomposition of sodium carbonate is:
The decomposition of sodium bicarbonate, will result in the formation of sodium oxide, and carbon dioxide, .
Hence, carbon dioxide, will produce with sodium oxide, on decomposition of .
Explanation:Na2CO3 Na2O +CO2 CO2 is the answer