What does the “188” represent in Tantalum-188

A. mass number
B. atomic number
C. mass defect

Answers

Answer 1

Answer:

mass number

Explanation:

When there is an element name followed by a dash and then a number, the number simply represents the mass number.

for example:

Oxygen- 18

18 represents the mass number of this particular isotope


Related Questions

Chloe is training for her first half-marathon, which requires her to run 21.1 km. Before she runs, she carefully chooses the foods that will give her the energy her body requires for the race. She stands still at the starting line, then she starts running, her body warming up as she runs. Which three energy transformations take place in this example? Potential energy to kinetic energy Chemical energy to thermal energy Chemical energy to kinetic energy Mechanical energy to chemical energy

Answers

Answer:

The transformation is of chemical energy (use the ATP molecule as a resource) which is then transformed into mechanical energy (muscle contraction) and finally transformed into thermal energy (increase in body temperature, or sweating)

Explanation:

Energy is never lost, it is always transformed, that is why energy is yielding electronic movement and expressing itself in different ways, first as chemical energy, then as mechanical energy, and lastly as thermal energy.

It is important to clarify that the energy source of all this transformation is food and energy reserves.

Calculate the density of helium if a balloon with a capacity of 5.00 L holds 0.890 g.

Answers

Answer:

Explanation:

Density is m/V. Also, 1 liter = 1000 [tex]cm^3[/tex]. So, we get 0.890/(5*1000) = [tex]1.78*10^{-4}[/tex] g/cm^3. You can convert this to kg/m^3 as well by multiplying it by 10. Depends which one you want.

The ratio of the mass in grams and volume in cubic meters gives the density. The density of 0.80 gm helium is 1.78 × 10 ⁻⁴ g/cm³.

What is density?

Density is the amount or the number of entities that can be contained in an area. It is denoted by ρ and is calculated as,

Given,

Mass = 0.890 gm

Volume = 5000 cm³

ρ = Mass ÷ Volume

= 0.890 ÷ 5000

= 1.78 × 10 ⁻⁴ g/cm³

Therefore, 1.78 × 10 ⁻⁴ g/cm³ is the density of helium.

Learn more about density here:

https://brainly.com/question/1563196

#SPJ2

If a building is anchored into the ground, it
A. was constructed on that particular spot many years ago
B. has water and electrical resources available
C. is built on a solid foundation and unlikely to shift
D. is likely to be damaged due to land subsidence
Please select the best answer from the choices provided
O A
c
B
U
a
D

Answers

Answer: C. Is built on a solid foundation and unlikely to shift

Explanation: If a building is anchored into the ground, it is built on a solid foundation and unlikely to shift .

Answer:

C. Is built on a solid foundation and unlikely to shift

Explanation:

After lab, all of Darrel's friends looked at his data and laughed and laughed. They told him that he was 30.8% too low in the boiling point he had just recorded. He had recorded a boiling point of 50o C on his data sheet. What is the correct boiling point of the liquid he was working with in lab?

Answers

Answer:

100°

Explanation:

For a boiling point is it always 100°

Fill in the blanks: a substance that undergoes a ______ change will always result in something new that has ________ properties than what it started out as. A- physical and different. b- physical and same. C-chemical and different. D chemical and same

Answers

The answer is C. When an object undergoes a physical change, its properties are different.

PLS ANSWER!! ASAP!!! 10 POINTS!!
Why are metals in Group 1A so reactive?
A. These metals need one electron to complete their outer shell.
B. These metals need two electrons to complete their outer shell.
C. These metals have one electron in their outer shell.
D. These metals have two electrons in their outer shell.

Answers

Answer:

the answer is = a. these materials...

The metals of Group 1A are so reactive because these metals have one electron in their outer shell. Therefore, option (C) is correct.

What are the metals of Group 1A?

The elements of Group 1A of the periodic table are also called alkali metals. The seven elements of group 1 A include hydrogen(H), lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr).

These are low-melting, extremely reactive, glossy metals that oxidize when exposed to air. When dissolved in water, these metals or their oxides produce a basic solution. Because of their high reactivity, alkali metals are instead found as ionic compounds (except hydrogen).

The general electronic configuration of the alkali metals is ns¹. As they lose one electron from their valence shell they acquire the nearest noble gas configuration, therefore they are very reactive.

The alkali metals are all lustrous, soft, and extremely reactive metals at normal temperature and pressure that quickly lose their valence electrons to create cations with charge +1.

Learn more about metals of Group 1A, here:

https://brainly.com/question/27751926

#SPJ2

by . Figure the density of the liquid in each beaker: The mass and volume of each liquid have been given in Table 1. Using the formula for density and a calculator, figure the density of each liquid and record it in the density column of Table 1. Round and write your answer out to the nearest hundredth. (This means you will have two numbers after the decimal point.) Don't forget to write the units!!!!!! (Hint: The formula was the answer to #2 on the front page.)​

Answers

Answer:

Well what are the numbers but ik that it ius 5

Explanation:

Please help!!!
When 38 g of a metal at 92 °C is added to
43 g of water at 22°C, the temperature of the
water rises to 30°C. What is the specific heat
capacity of the metal? Assume no heat was
lost to the surroundings.

Answer in units of
J/g degrees C

Answers

The specific heat  capacity of the metal : 0.610 J/g° C  

Further explanation  

The law of conservation of energy can be applied to heat changes, i.e. the heat received/absorbed is the same as the heat released  

Q abs = Q received  

Heat can be calculated using the formula:  

Q = mc∆T  

Q = heat, J  

m = mass, g  

c = specific heat, joules / g ° C  

∆T = temperature difference, ° C / K  

∆T = T(final temp) - T(initial temp)

mass of metal = 38 g

T initial metal = 92 °C

mass of water = 43 g

T final water = 30  °C

T initial water = 22°C

c water = 4.18 J/g° C  

Heat absorbed by water

[tex]\tt Q=m.c.\Delta T\\\\Q=43\times 4.18\times (30-22^oC)\\\\Q=1437.92~J[/tex]

the specific heat  capacity of the metal

Q water = Q metal

[tex]\tt 1437.92=38\times c\times (92-30)\\\\c=0.610~J/g^oC[/tex]

POSSIE Gallium (Ga) is a soft, silvery metal used primarily in electronic circuits, semiconductors, and light-emitting diodes (LEDs). It is also useful in high-temperature thermometers, barometers, pharmaceuticals, and nuclear medicine tests. Which electron configuration represents the electrons in an atom of gallium at ground state? O1s 2s22p63s23p64524d104p? O 182 2s22p63s23p64s24p1 o 1s 2s22p63s23p64823d104p? O 182 2s22p63s23p64s3​

Answers

The ground state configuration : 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p¹

Further explanation

Electrons can move the shell up or down by releasing energy or absorbing energy  

It can be concluded that there are 2 conditions:  

Ground-state is the state of electrons filling the shell with the lowest energy levels.  

Excited-state is the state of electrons which occupies a higher energy level  

The state of excited electrons can be seen from the presence of electrons which do not fill the shell completely but fill the shell afterward  

Gallium (Ga) is a metal located in group 13, p-block and  period 4

Atomic number : 31

If we look at the options:

options 1,2 and 3 do not conform to Aufbau principle(Electrons occupy orbitals of the lowest energy level  ), because 3d orbitals do not exist and the number of electrons is also not 31

So that the most appropriate electron configuration is:

1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p¹ = 31 electrons

or we can write : [Ar] 4s² 3d¹⁰ 4p¹

why people on earth cannot see the entire shape of the milky way

Answers

Answer:

Explanation:

That is because the Milkyway is full of dust and gas, you cannot really see something if it has dust and gas

Answer:

Its too far away to see

Explanation:

You would probably have to be in space

How to separate these pure substance?if it is not possible, please write cannot be separate

Oxgen
Water
Gold
Carbon Dioxide
Carbon​

Answers

Answer:

Oxgen- cannot be separated

Water - chemical change

Gold - cannot be separated

Carbon Dioxide - chemical change

Carbon​ - cannot be separated

Explanation:

A pure substance, which can either be an element or a compound, contains only one type of such element or compound. In opposition to a mixture, pure substances cannot be separated by physical means.

- Elements as a pure substance cannot be separated because it contains only one type of atom. However, compounds contain two or more types of atoms, and hence, can only be separated into its individual atoms via chemical means.

In this question, oxygen (O2), Gold (Au) and carbon (C) are all elements and hence cannot be separated. Carbon dioxide (CO2) and water (H2O) are compounds because they contain two different atoms respectively, hence, can be separated into individual atoms.

whats the mass number for titanium if it has 27 neutrons?​

Answers

Answer: 49

Explanation: Mass number is protons + neutrons. So that would be 22 + 27 which gives you 49

Use the rules of significant figures to report the answer to this math question: (454.3 cL x 17.84 dL )/3.1 L =

Answers

Answer:

2614.423226

Explanation:

Name for each compoud
1.CO
2.H2SO4
3CaCO3
4 H202
5NaF

Answers

1. Carbon monoxide
2. Sulfuric acid
3. Calcium carbonate
4. Hydrogen peroxide
5. Sodium fluoride
hope this helps (:

A student measures the mass and volume of a
substance and calculates its density as 1.40 g/mL. The
correct, or accepted, value of the density is 1.30 g/mL.
What is the percentage error of the student's
measurement?

Answers

Answer:

The answer is 7.69 %

Explanation:

The percentage error of a certain measurement can be found by using the formula

[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]

From the question

actual number = 1.30 g/mL

error = 1.40 - 1.30 = 0.1

We have

[tex]p(\%) = \frac{0.1}{1.3} \times 100 \\ = 7.692307...[/tex]

We have the final answer as

7.69 %

Hope this helps you

Identify the choice that best completes the statement or answers the question.
Banana slugs live on the ground in moist forests of the Pacific Northwest. They consume and
break down a variety of materials, including small dead animals and rotting leaves. Which
term describes banana slugs?
O carnivores
O consumers
O decomposers
O producers
PLEASE HELP!!!

Answers

The answer would be decomposers

Do 2. A student determines that there are 1.3 x 1025 molecules of an unknown
substance in a 968 g sample. Which compound most likely represents this
unknown substance?
CO
CIO
2)
CO2
N203
CLEAR ALL

Answers

Answer:

The correct option is;

CO₂

Explanation:

The given information are;

The number of molecules in the substance = 1.3 × 10²⁵

The mass of the substance = 968 g

Therefore, we have;

The number of molecules in one mole of a substance = 6.02 × 10²³

The number of moles present = (1.3 × 10²⁵)/(6.02 × 10²³) ≈ 21.595 moles

Therefore, 968 g = 21.595 moles

1 mole = 968/21.595 = 44.826 g

The mass of one mole of the substance = 44.826 g

Therefore the mass of one mole of the substance is closely related to the mass of one mole of CO₂ which is 44.01 g/mol.  

The correct option is CO₂

The calculation is as follows:

The number of molecules in one mole of a substance should be = 6.02 × 10²³

And,

The number of moles present is

= (1.3 × 10²⁵)/(6.02 × 10²³)

≈ 21.595 moles

Now

1 mole = 968/21.595 = 44.826 g

The mass of one mole of the substance = 44.826 g

So,  the mass of one mole of the substance is closely related to the mass of one mole of CO₂ i.e.  44.01 g/mol.  

Learn more: https://brainly.com/question/1504221?referrer=searchResults

what is the chemical name of CCI3

Answers

Answer:

Trichloromethyl radical

Explanation:

Answer:

trichloromethanide

Hope this helped

Deciding that she was thirsty, Ms. Smith decided to mix up some lemonade using 2 tablespoons of lemonade, and 2 cups of water. What is the solute and solvent?

Answers

Explanation:

solute is the substance being dissolved so that is the 2 tablespoons of lemonade and the 2 cups of water is the solvent.

Which part of Earth absorbs the most sunlight? brainly

Answers

the equator absorbs the most sunlight in earth

Answer:

the answer is A)Oceans

Explanation:

Help ASAP plzzzz!!!!!!!!

Answers

Answer:

Granite Solid

Milk Liquid

Neon is gas

Wood Is solid

Paper is solid

Helium is Gas

Water is liquid

Air is Gas

Alcohol is liquid

Metal is solid

Nitrogen is gas

Juice is liquid

Oil is liquid

Water Vapor is Gas

Brick is Solid

Propane is Gas

Fabric is solid

Gasoline is Liquid

Explanation:

Hope Dis helped :D :3

I agree with the person above, me you can search those up or look on the periodic table for some of them because metals are to the left and non-metals are to the right.

what is atomic radius​

Answers

Explanation:

The atomic radius of a chemical element is a measure of the size of its atoms, usually the mean or typical distance from the center of the nucleus to the boundary of the surrounding shells of electrons. Since the boundary is not a well-defined physical entity, there are various non-equivalent definitions of atomic radius. Three widely used definitions of atomic radius are: Van der Waals radius, ionic radius, and covalent radius

lonic bonding
10. If two atoms that differ in electronegativity combine by chemical reaction and
share electrons, the bond that joins them will be
(1 Point)
ionic bond
polar covalent
nonpolar covalent
a hydrogen bond

Answers

Answer:

polar covalent

Explanation:

If they do not equally share the electron then it is polar and covalent bonds share electrons

Enter the symbol of the element which would have 36 electrons and -3 charge.

Answers

Answer:

Arsenic if I understood correctly

Explanation:

Ions can be made by single element or covalently bonded group of elements. The covalently bonded group of elements is called polyatomic ions or polyatomic atoms. Therefore, the element with atomic number 33 and -3 charge is Arsenic.

What is Ions?

Any species that contain charge whether it is positive charge or negative charge is called ions. The example of polyatomic ions are sulfate, phosphate, nitrate etc.

Cation is the species that loose electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral, the charge over cation and anion is also called oxidation state. The element with atomic number 33 and -3 charge is Arsenic.

Therefore, the element with atomic number 33 and -3 charge is Arsenic.

To learn more about ions, here:

https://brainly.com/question/13692734

#SPJ2

Write the correct electron configurations for the following:
ments
ions
• Na (atomic # 11)
• Fe (atomic # 26)
• As (atomic # 33)
• F (atomic #9)
• Co (atomic #27)
• Ag (atomic # 47)
• K (atomic # 19)
• Cu (atomic # 29)
• Si (atomic # 14)

Answers

Answer:

Ag

Explanation:

atomic 33 because it what what sence

Na- 1s^2 2s^2 2p^6 3s^1

Fe- 1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^6

As- 1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^10 4p^3

F- 1s^2 2s^2 2p^5

Is burning the glass plate is physical or chemical change?

Answers

This is a physical change because you are burning the glass plate and that changes the plate. I hope this helps. HAVE A GREAT DAY
This is a chemical reaction because stour adding heat, you are chemically doing something, physical is when you point out the obvious using your five senses. Touching it to feel how soft on object is, or what colour (vision). You are adding heat which is chemical.

What was Wegener's continental drift idea?​

Answers

Answer: In the early 20th century, Wegener published a paper explaining his theory that the continental landmasses were “drifting” across the Earth, sometimes plowing through oceans and into each other.

Explanation:  He called this movement continental drift.

sksksksksksksksksksksksksksksks

will give brainlliest

Which noble gas is closest to sulfur, S, on the periodic table? What has to happen for a sulfur atom in order to have an electron arrangement similar to the nearest noble gas?

Answers

Answer: argon

What must happen to a sulfur atom in order for it to have an electron arrangement similar to that of a noble gas? Answer: The noble gas closest to sulfur is argon. A sulfur atom gains two electrons to have an electron arrangement similar to that of argon.

Explanation:

what is the solution to the equation below rounded to the correct number of significant figures? 4700 L - 281.4 = _____ L

Answers

Answer:4400

I went over this problem multiple times and I finally found the soultion

The concept of significant figures are mainly used by scientist and engineer to know the significance of digits in a measurement. Therefore, 4400L is the solution to the equation rounded to the correct number of significant figures.

What is significant figures?

Significant figures are the figures that indicate the degree of accuracy of a value. It tells about the precision of a value. It gives an idea about the digits that are necessary to indicate the experimental value.

Rules for counting significant figures are:

Number between 1 to 9 is always significant

Zeroes after a number has got no significance

Zeroes before a number has got no significance

Zeroes between number has got significance

4700 L - 281.4 =4400L

Therefore, 4400L is the solution to the equation rounded to the correct number of significant figures.

To learn more about Significant figures, here:

https://brainly.com/question/12656148?

#SPJ2

Which pair of symbols represents nuclei with the same number of neutrons?
A. 56 Co and 580
B. 57Co and 58Ni
c. 57Fe and 58 Ni
D. 57Mn and 57Fe

Answers

Answer:

B

Explanation:

Mass number  = number of neutrons + number of protons

Atomic number is the number of protons in the nucleus.  

58Ni   : 58 is the number of neutrons + number of protons

atomic number of Ni is 28.  Thus,  58 -28 = 30 neutrons

57Co ;  57 is the number of neutrons + number of protons

number of Co is 27. Thus, 57 – 27  = 30 neutrons

Other Questions
what does the galaxy made of ? Which is one of the main themes of Walden? Which of the following sets represents a function?{( one,one), (two comma one), (three comma one), ( four comma one)}{( one comma one), (one comma two), ( one comma three), (one comma four)}{( one comma one), ( two comma one), ( two comma one), ( three comma one)}{( two comma one), ( two comma two), ( three comma two), ( four comma two)} |1.64 divided by what equals 0.04? An alloy is a mixture of metals. Suppose that a certain alloy is made by mixing 50 g of an alloy containing 12% copper with 78 g of an alloy containing 92% copper how many grams of copper are in the resulting mixture what percentage of the resulting mixture is copper The exchange rate is 156 pesos for 1 US dollar. The CD costs 1,833 pesos. You have $14.00 Answer the following questions using either numerals or yes or no. C. How much change would you have coming back to you in pesos, or if you're short of money how many pesos do you still need? The yield in bushels from a grove of orange trees is given by Y = x(600 x), where x is the number of orange trees per acre. How many trees will maximize the yield? Which of the following is a possible value for X An object is accelerating if there is a change in speed and which factor? A. direction B. displacement C. time D. position how do skeletons travel in an emergency A square plaza at a train station has a side length as shown. Which expression represents the area of the plaza in square meters?2x + 6x2 + 96x + 9x2 + 6x + 9 Given: ABC, where AB = BC Prove: mBAC = mBCA Statement Reason 1. Let ABC be an isosceles triangle with AB = BC. given 2. Create point D on side so bisects ABC. constructing an angle bisector 3. MABD = mCBD definition of angle bisector 4. BD = BD Reflexive Property of Equality 5. ABD CBD 6. MBAC = mBCA Corresponding angles of congruent triangles have equal measures. What is the reason for statement 5 in this proof? A. ASA B. SSS C. AAS D. SAS Outrage is the name of a a.monkeyc.horseb.servantd.leper What point of view is used in this quote?"It was time like these when I thought my father, who hated guns and had never been to any wars, was the bravest man who ever lived." Mrs. Greene wants to plant a vegetable garden in her yard. She purchased a package containing 30 sections of fencing, each 1-foot long If she uses all 30 sections to create rectangular space, how many different arrangements are possible? What is the largest area she can enclose for her garden with this fencing? Can someone Answer this please! Write a program that reads in 10 numbers from the user and stores them in a 1D array of size 10. Then, write BubbleSort to sort that array continuously pushing the largest elements to the right side 7 x7 dived by 5 plz helppppvme !!!TIME LIMIT PLZ HURRY!!!Which describes the relationship between How many Indian pythons are left in the world?