what does pen mean?.

Answer:

froth flotation is a technique commonly used in the mining industry. In this technique, particles of interest are physically separated from a liquid phase as a result of differences in the ability of air bubbles to selectively adhere to the surface of the particles, based upon their hydrophobicity.

Explanation:

Froth floatation method is commonly used to concentrate sulphide ore such as galena (PbS), zinc blende (ZnS) etc. (ii) In this method, the metaalic ore particles which are perferentially wetted by oil can be separated from gangue. (iii) In this method, the crushed ore is suspended in water and mixed with frothing agent such as pine oil, eucalyptus oil etc. (iv) A small quantity of sodium ethyl xanthate which act as a collector is also added. (v) A froth is generated by blowing air through this mixture. (vi) The collector molecules attach to the ore particles and make them water repellent. (vii) As a result, ore parrticles, wetted by the oil, rise to the surface along with the froth. (viii) The froth is skimmed off and dried to recover the concentration ore. (ix) The gangue particles that are preferentially wetted by water settle at the bottom.

One mole of a substance is equal to 6.022 × 10²³ units of that substance (such as atoms, molecules, or ions). The number 6.022 × 10²³ is known as Avogadro's number or Avogadro's constant. The concept of the mole can be used to convert between mass and number of particles.

1. a) Igneous.

2. c) Metamorphic.

3. b) It broke into sediment and then compacted.

4. d) All types of rocks.

5. a) Wind and rain break down the rock into small pieces.

6. a) Yes, but it should be subtuced first.

7. c) Earth's interior.

8. c) Water.

9. b) Magma is molten rock within the Earth; lava is molten rock on the Earth's surface.

Answer:

CaO < BaO < KCl <KI

Explanation:

Let us remember that the solubility of an ionic substance in water depends on the magnitude of the lattice energy and the hydration energy.  If the hydration energy is equal to or is greater than the lattice energy, the substance dissolves in water.

However, the lattice energy depends on the size of the ions. The smaller the ions in the ionic compound, the higher the lattice energy and the lesser the solubility of the ionic compound.

KI has the least lattice energy and the highest solubility in water while CaO has the highest lattice energy and the least solubility in water.

Answer:

I think the dish contracts and shrinks

Answer:

The dish cracks or breaks.

Explanation:

When glass changes temperature rapidly, it may undergo thermal shock. This is stress that is produced by a sudden change in temperature.

Explanation:

The general equation for an endothermic reaction is: Reactants + Energy → Products.

Hope it helps :)❤

The equation represents an endothermic reaction is reactants + energy

products.

Endothermic reactions are chemical reactions in which the reactants soak up warm strength from the surroundings to form products.

Learn more about the endothermic reaction here:-https://brainly.com/question/6506846

#SPJ2

Answer:

A). Lewis Acid

Explanation:

deez

The term that best describes the compound that accepts electrons from another substance to form a covalent bond is Lewis acid.

Lewis acid is a compound or ionic species which can accept an electron pair from a donor compound while a Lewis base is a compound such as the OH- ion, that can donate a pair of non-bonding electrons.

According to this question, a compound accepts electrons from another substance to form a covalent bond.

Therefore, the term that best describes the compound that accepts electrons from another substance to form a covalent bond is Lewis acid.

Learn more about Lewis acid at: https://brainly.com/question/15570523

#SPJ2

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer: I think it is hydroxide ion but im not sure

Explanation:

I hope this helped!

<!> Brainliest is appreciated! <!>

- Zack Slocum

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer: radio wave frequencies have longer wavelengths and smaller

Energies per photon

On CK-12 all of these answers are correct

1.9

1.888

1.89

1.88

The molality of a 10.0 % by mass solution of sodium chloride (NaCl) is 1.7M.

Molarity of any solution will be calculated as number of moles of solutes present in per litre of the solution.

Moles of the substance will be calculated as:

n = W/M, where

W = given mass

M = molar mass

Given that percent mass of NaCl = 10% i.e. 10g of NaCl is present in 100 g of solution.

We know that 1 g = 0.001 L

100 g = 0.1 L

Moles of NaCl = 10g / 58.44g/mol = 0.17 mol

Molarity of NaCl = 0.17 / 0.1 = 1.7M

Hence required molarity is 1.7 M.

To know more about molarity, visit the below link:
https://brainly.com/question/489225

Answer:

by adding heat

Explanation:

Adding heat can cause ice (a solid) to melt to form water (a liquid). Removing heat causes water (a liquid) to freeze to form ice (a solid).

by adding heat

when water was changes to soild or a gas , we say change to a different state of the matter. Even though the waters physical from change its molecular stay the same

Answer:

Explanation:

Invest in a reusable water bottle. ...

Bring your own reusable cup. ...

Refuse single-use items. ...

Avoid products with microbeads. ...

Shop in bulk

Answer:

Explanation:

The main assignment here is to provide the structure of A. But before that, let us explain briefly some certain things:

The proton NMR (1H) gives data about the quantity of non-identical protons present in the structure. The resonance frequency is seen regarding the standard compound (0 ppm), which is addressed as a chemical shift. The same protons have equal value of chemical shift.

The protons that are available in a similar environment are addressed as comparable protons and the protons with various conditions are called non-identical protons.

However, from the image below, we can see the reaction of the compound 1,3,5,7-cyclooctatetraene resulting in 2 equivalents of potassium forming an aromatic dianion.

Answer:

True

Explanation:

Answer:No, the Cell Membrane does I'm pretty sure

Explanation:

Answer:

1 mole = 28.0101

Hence,

82.4 = around 2.8 mole

Have a great day <3

Answer:

When there is a conflict and if a friend responding to conflict with confrontation it may affect positively or negatively both ways depend how he responds or confront the other person he has a conflict with. But normally people alienate with the person being confrontational. A friend should try to resolve the conflict by making an amicable solution.

if it is used correctly it could help in making the relationship strong, however, confronting by attacking them verbally, insult them, or talking loudly among the group of people can escalate the conflict.

I will advise him to be cautious of the approach as it may positively or negatively affect the situation.

This is the process which involves directly engaging one another in the course of a dispute between them.

This method however could either resolve the conflict or worsen it which is why special approach should be taken by being calm and being respectful to the other party involved.

Read more about Confrontation here https://brainly.com/question/1004819

Answer:

Explanation: A compound with the empirical formula SO has a molecular weight of 96.13

Answer:

60.86 g of PH₃

Explanation:

We'll begin by calculating the number of mole of H₂ that will occupy 60 L. This can be obtained as follow:

22.4 L = 1 mole of H₂

Therefore,

60 L = 60 / 22.4

60 L = 2.68 mole of H₂.

Next, we shall determine the number of mole of PH₃ produced by the reaction of 60 L (i.e 2.68 mole) of H₂. This can be obtained as follow:

P₄ + 6H₂ –> 4PH₃

From the balanced equation above,

6 moles of H₂ reacted to produce 4 moles of PH₃.

Therefore, 2.68 moles of H₂ will react to to produce = (2.68 × 4)/6 = 1.79 moles of PH₃.

Finally, we shall determine the mass of 1.79 moles of PH₃. This can be obtained as follow:

Mole of PH₃ = 1.79 moles

Molar mass of PH₃ = 31 + (3×1)

= 31 + 3 = 34 g/mol

Mass of PH₃ =?

Mass = mole × molar mass

Mass of PH₃ = 1.79 × 34

Mass of PH₃ = 60.86 g

Thus, 60.86 g of PH₃ were obtained from the reaction.

Divide the volume of water with mass of salt and multiply with 100 you'll get the concentration percentage

answer is B, because solution A's percentage is 10%

brainliest plz

Answer:

Gill Slits

Explanation:

For the one who asked what hind limbs are they are back legs :)

Answer:

B

Explanation:

The solubility depends on the ksp. As the value of ksp increases the compound becomes more and more soluble.

In the options, the highest ksp value is 10^-10, thus that one is the most soluble.

Answer:

here

Explanation:

Answer: 4

A molecule of carbon tetrafluoride, CF4 , is made up of 1 carbon atom bonded to 4 fluorine atoms. Each carbon atom weighs 12.0 amu and each fluorine atom weighs 19.0 amu so 1 CF4 molecule weighs 1×12.0 amu + 4×19.0 amu = 88.0 amu. This number, 88.0, is called the molecular weight (or molecular mass) of CF4.

Answer:

heterogeneous mixture is a mixture that is non-uniform and contains smaller component parts.

Answer:

heterogenous mixture is type of mixture

Explanation:

it is one type of mixture involve in the mixture of different or hetro substance and can also easely separated or seen by naked eye  example mixture of water  and sand

Answer:

215 moles

Explanation:

[tex]9.6mol CO_{2} (\frac{22.4 L CO_{2}}{1 mol CO_{2}} ) = 215 L CO_{2}[/tex]

population is the number of species living in a given area if this is regarding biology or earth studies :)

Answer:

C. Hydrogen bonds​

Explanation:

Strongest intermolecular force

Hydrogen Bonding (H-Bonding)

Hydrogen bonds are caused by highly electronegative atoms. They only occur between hydrogen and oxygen, fluorine or nitrogen, and are the strongest intermolecular force.

Answer: C hydrogen bonds

Explanation: