Something that is falsely advertised to help different health issues. An example could be Eyeball massagers
Tom pulls a muscle. He has to stop working to get an ice pack. Claudia continues to work and soon finishes her pile.
Power is the rate of doing work. It's calculated by dividing work by time (power = work = time). Who had more power in
this scenario? Why?
Answer:
Tom
Explanation:
if for example both their work is 40 and Tom stops working after 2 hours but Claudia continues and stops after 3 hours when you divide their work by their time Claudia will get a lower number of power.
(in your explanation maybe use different numbers based on you book or notes)
Answer:
Claudia had more power. She did more work than Tom, and she did it in less time.
Explanation:
sample answer on edmentum. maybe change it up. hope this helps:)
please help quick
How much work is done by the people in raising the load 3 meters if the combined pulling force of the men on the rope is 700 newtons?
A.233 N·m
B. 703 N·m
C. 2,100 N·m
D. 400 N·m
Answer:
C is the right answer for the question
What is the energy of a 5 kg object that is held at a height of 3 m above the ground?
Formula
substitute
answer
Answer:
147 Joules
Explanation:
It would be potential energy because it is stored. Potential energy = gravity * mass * height. Gravity is 9.8 m/s² or more specific 9.807 m/s². Potential energy is written in Joules.
9.8 * 5 * 3 = 147 Joules
More specific:
9.807 * 5 * 3 = 147.105 Joules
12. A lathe mounted on wooden skids is to be slid down a pair of planks placed against the back of a truck.
(a) If the coefficient of friction is 0.28, what angle should the planks make with the ground in order for the lathe to slide down at constant velocity?
(b) When the planks are at this angle, will the lathe start to slide down of its own accord?
(a) The angle the planks make with the ground in order for the lathe to slide down at constant velocity is 90⁰.
(b) Yes, at this angle the lathe will start sliding at constant velocity because of the sharp steepness.
The given parameters:
coefficient of friction, μ = 0.28The net force on the wooden skids is calculated as follows;
[tex]\Sigma F = 0\\\\F - \mu mg cos\theta = 0\\\\ma - \mu mg cos\theta = 0\\\\ma = \mu mg cos \theta \\\\a = \mu g cos\theta\\\\at \ constant \ velocity , \ a = 0\\\\0 = \mu g cos \theta\\\\cos \theta = 0\\\\\theta = 90 ^0[/tex]
Yes, at this angle the lathe will start sliding at constant velocity because of the sharp steepness.
Learn more about coefficient of friction here: https://brainly.com/question/14121363
Your friend has a rubber band stretched between two fingers. When you pluck the rubber band, it vibrates and makes sound. What would you have to do to make the sound a higher pitch?
To make a higher pitch, stretch the rubber band more.
To make a higher pitch, pluck the rubber band less hard.
To make a higher pitch, stretch the rubber band less.
To make a higher pitch, pluck the rubber band harder.
Answer:
I think it is To make a higher pitch, stretch the rubber band more
Explanation:
I'm not too sure. Sry if u got it wrong
Answer:
To make a higher pitch ,pluck the rubber band more
A ball is kicked at an angel of 37° to a goalkeeper who is 24m away. What was the initial velocity of the ball?
The initial velocity of the ball when it was projected is 15.64 m/s.
The given parameters:
Angle of the projection, θ = 37⁰The range of the projectile, R = 24 mThe initial velocity of the ball is calculated by applying formula for range of projectile as follows;
[tex]R = \frac{u^2 sin(2\theta)}{g} \\\\u^2 = \frac{Rg}{sin(2\theta)} \\\\u = \sqrt{\frac{Rg}{sin(2\theta)} } \\\\u =\sqrt{\frac{24 \times 9.8}{sin(2\times 37)} } \\\\u = 15.64 \ m/s[/tex]
Thus, the initial velocity of the ball when it was projected is 15.64 m/s.
Learn more about range of projectile here: https://brainly.com/question/12870645
Two horizontal curves on a bobsled run are banked at the same angle, but one has twice the radius of the other. The safe speed (no friction needed to stay on the run) for the smaller radius curve is v. What is the safe speed on the larger radius curve?
A) v/2
B) v /√ 2
C) 2v
D) v√2
I shall answer it here so this can help other students out
First, FN = mg/cos
On a banked curve, FNx is the only acceleration force
FNx = mv^2/r
FNx = FNsin
mg/cos * sin = mv^2/r
cancel out the mass (m) and sin*1/cos is tan
gtan = v^2/r
rgtan = v^2
√(rgtan) = v (this is the velocity for the smaller radius.)
call larger radius velocity X
for larger radius, it becomes 2r, so √(2rgtan) = X
understand you can do √xy = √x * √y
√(rgtan) * √2 = X (√(rgtan) = v)
v * √2 = X (where X is velocity with larger radius)
Answer:
Answer:
safe speed for the larger radius track u= √2 v
Explanation:
The sum of the forces on either side is the same, the only difference is the radius of curvature and speed.
Also given that r_1= smaller radius
r_2= larger radius curve
r_2= 2r_1..............i
let u be the speed of larger radius curve
now, \sum F = \frac{mv^2}{r_1} =\frac{mu^2}{r_2}∑F=
r
1
mv
2
=
r
2
mu
2
................ii
form i and ii we can write
v^2= \frac{1}{2} u^2v
2
=
2
1
u
2
⇒u= √2 v
therefore, safe speed for the larger radius track u= √2 v
Why do magnets move objects in different ways?
Answer:
Magnets have two poles, called north and south. The like poles are attracted to unlike poles, but like poles repel each other. For example, the north pole of one magnet is attracted to the south pole of another. ... To make objects move with a magnet attach a piece of metal, or another magnet, to it.
What is chemical reaction? Give an example of each of exothermic and endothermic reaction
Answer:
A chemical reaction is a process that occurs when two or more molecules interact to form a new product(s).
Endothermic reactions are chemical reactions in which the reactants absorb heat energy from the surroundings to form products.
Example:
A popular example of an endothermic chemical reaction is photosynthesis. During this process, plants absorb energy from the Sun and convert it into carbon dioxide and water into glucose and oxygen.
An exothermic reaction releases energy into the surrounding of the system.
Example:
the chemical reaction between sodium and chlorine results in the formation of sodium chloride (also known as common salt).
The gravitational force on Mars is about 38% of Earth. What would a cat weighing 15 pounds on Earth weigh on Mars?
Answer: 5.7
Explanation: 38% of 15.
The weight we experience ourselves and the ability to stand in the ground is due to the gravitational pull of earth. If this pull is lower we feel weight loss. So the cat will have a weight of 5.7 pounds or 2.58 kg in mars where the gravitation is about 38% of earth.
What is gravitational force?Gravitational force is a kind force by which a body attracts other objects into its centre of mass. Earth have strong gravitational effect on objects and thus we are all standing on the surface and everything falling from a height hits the ground.
As the mass of the object increases, gravitational effect also increases. The weight experienced by a body is the product of its mass and gravity. Thus massive body have greater weight.
Our mass is constant everywhere but weight will change according a change in gravity. Mars have only 38% of gravity of earth. Thus the cat weighing 15 pounds on earth will loss its weight in mars by 38%.
Thus, 15 × 38/100= 5.7 pounds will be the weight of the cat in mars.
To find more about gravity, refer the link:
https://brainly.com/question/4014727
#SPJ5
"true wisdom is knowing what you don't know"
Reader's Response/explanation
(Y'all I need help)
Answer:
“The only true wisdom is in knowing you know nothing.” ― Socrates. Socrates had it right. Remain humble and appreciate the fact that you don't know everything. ... Thankfully, one's search for knowledge has no end as there is always something new to learn, giving one's life meaning and purpose.
Explanation:
Answer:
knowing wisdom cool
Explanation:
lol
An object’s mechanical energy is
a
its energy of motion.
b
the sum of its potential (position) energy and kinetic (motion) energy.
c
the waste energy it produces by friction.
d
not related to the object’s mass.
Explanation:
the sum of its potential (position) energy and kinetic (motion) energy.
Drag each tile to the correct location.
Match each process to where it occurs in the carbon cycle.
Ingestion
fossilization
decomposition
combustion
light
energy
oxygen
carbon
dicadde
- sugar
minerak
water
All rights reserved
The order of the location of each process in the carbon cycle are as follows;
Ingestion → Decomposition → Fossilization → CombustionReasons:
Ingestion; During the ingestion process, the products of the direct Sunlight and photosynthesis, which
are energy rich chemical substances are ingested by herbivores.
Decomposition; The plants and animals die and undergo decomposition.
Fossilization; A long period the decomposed plants and animals manifest
into hard petrified materials, with their parts transformed to fossils.
Combustion; The remains of plants and animals, subjected to heat and
pressure due to compression, as when as bacteria decomposition that
removes several other elements, leaving a carbon and hydrogen rich
sludge that can be processed into fuel used for combustion. The
combustion process produces carbon dioxide which restarts the cycle.
Learn more about the carbon cycle here:
https://brainly.com/question/8648417
give answer or fight me
Answer:
translucent
Explanation:
Hope this helps! Pls give brainliest! Also, please sub to Kgirl633 on yt.
A car moving at 60 mph slams on its brakes to stop before hitting a deer. Another identical car traveling at 60 mph slows to a stop at a stop sign. Who experiences the greatest impulse during the stop
Happy Holidays!
Recall that:
Impulse = Change in Momentum = mass × change in velocity
Since both cars are identical and have the same initial velocity of 60 mph, them breaking to a stop means that they both experience the same change in velocity.
Thus, both of the cars' impulses are equal.
The bulb in the circuit shown below does not glow. Which of following labelled parts is responsible for this?
Answer:
answer to this question is c
Answer:
3
Explanation:
because the battery's power is not functioning well
how to prove sand is not a fluid even if it takes the shape of a container
A payload of mass m, where m
Answer:
where m < M is delivered to the space station. Soon after, the space station's orbit is adjusted so that it is 50 km ...
A payload of mass m, where m<M, is delivered to the space station.
What is payload?The maximum mass that the vehicle is capable of moving is referred to as the mass's payload. The carrying capacity of a packet or other transmission data unit is referred to as a payload.
The phrase, which has military roots, is frequently used in relation to malicious code that can be executed and cause harm. A payload is a section of code that runs when hackers take advantage of a weakness. In other words, it's a module for an exploit.
It typically consists of a few commands that will execute on the targeted operating system in order to steal data and carry out other malicious deeds (such as keyloggers).
Therefore, A payload of mass m is sent to the space station, where m<M.
Learn more about the payload, refer to:
https://brainly.com/question/7137877
#SPJ2
Using techniques similar to the aluminum foil lab, how could you do an experiment to determine the volume of the filled soda bottle? What factors might limit the accuracy of your experiment?
Answer:
applications of density measurements. The densities of brass and aluminum will be calculated from mass and volume measurements.
Explanation:
Choose all the answers that apply.
Light _____.
A. cannot travel through a vacuum
B. slows down when traveling through denser substances
C. speeds up when traveling through more dense substances
D. travels in transverse waves
E. can be absorbed and transformed into heat
Answer:
B
Explanation:
where in space did the expansion of the universe begin?
Answer:
The big bang
Explanation:
It is theorized the expansion of the universe began with the big bang, the universes expansion therefore did not begin in a spot of the universe rather the universe expanded from the big bang.
A stone is thrown horizontally from the top of an inclined plane (angle of inclination θ). How would I find the initial speed of the stone if it hit the plane a distance L down the slope from the point of launch?
Answer:
S = V t where S is the horizontal distance traveled
1/2 g t^2 = H where H is the vertical distance traveled
t^2 = 2 H / g
V^2 = S^2 / t^2 = S^2 g / (2 H) combining equations
tan theta = H / S
V^2 = S g / (2 tan theta)
Using S = L cos theta
V^2 = L g cos theta / (2 tan theta)
Giving V in terms of L and theta
The magnitude of acceleration due to gravity is
Select one:
a. 9.8 m/s
b. 8.9 m/s2
c. 4.6 m/s
Answer:
The magnitude of a gravity is always 9.8 which is later approximated to 10m/s.
Answer:
a. 9.8
Explanation:
The magnitude of acceleration due to gravity is 9.8
draw the following vector quantity Using the coordinate system.
a. 190 newton east
b. 120km/hr, 250 north of east
c. 60 meters southwest
The given vectors quantities can be described by their properties of both
magnitude and direction.
a. The drawing of the vector extending from point (0, 0) to (190, 0) on the coordinate plane is attached.b. The velocity vector extending from (0, 0) to (108.76, 50.714) on the coordinate plane is attached.c. The displacement vector extending from (0, 0) to (30·√2, 30·√2) is attached.Reasons:
a. The magnitude of the vector = 190 N
The direction in which the vector acts = East
Therefore, in vector form, we have;
[tex]\vec{F}[/tex] = 190 × cos(0)·i + 190 × sin(0)·j = 190·i
The vector can be represented by an horizontal line, 190 units long
Coordinate points on the vector = (0, 0) and (190, 0)
The drawing of the vector with the above points using MS Excel is attached.
b. Magnitude of the velocity vector = 120 km/hr. 25° North of east
Solution;
The vector form of the velocity is; [tex]\vec{v}[/tex] = 120 × cos(25)·i + 120×sin(25)·j, which gives;
[tex]\vec{v}[/tex] = 120 × cos(25)·i + 120×sin(25)·j ≈ 108.76·i + 50.714·j
[tex]\vec{v}[/tex] ≈ 108.76·i + 50.714·j
Therefore, points that define the vector are; (0, 0) and (108.76, 50.714)
The drawing of the vector is attached
c. The magnitude of the vector = 60 m
The direction of the vector is southwest = West 45° south
The vector form of the displacement is [tex]\vec{d}[/tex] = 60 × cos(45°)·i + 60 × sin(45°)·j
Which gives;
[tex]\vec{d}[/tex] = 30·√2·i + 30·√2·j
Points on the vector are therefore; (0, 0), and (30·√2, 30·√2)
The drawing of the vector is attached
Learn more about vectors here:
https://brainly.com/question/10409036
A racquetball with a mass of 42 g is moving with a horizontal speed of 7 m/s to the right (+x direction). It hits the wall of the court and rebounds to the hitter with a horizontal speed of 7m/a to the left (-x direction).what is the magnitude of the racquetball's change in momentum?
The magnitude of the racquetball's change in momentum is 0.59 kgm/s approximately.
Given that a racquetball with a mass of 42 g is moving with a horizontal speed of 7 m/s to the right (+x direction).
mass m = 42g = 42/1000 = 0.042kg
initial velocity before collision u = 7 m/s
It hits the wall of the court and rebounds to the hitter with a horizontal speed of 7m/s to the left (-x direction). That is,
velocity after collision v = 7 m/s
To calculate the magnitude of the racquetball's change in momentum, we will use the formula below
Change in momentum = Mv - Mu
Since momentum is a vector quantity, we will consider the direction.
Change in momentum = 0.042 x 7 - ( 0.042 x - 7)
Change in momentum = 0.294 + 0.294
Change in momentum = 0.588 kgm/s
Therefore, the magnitude of the racquetball's change in momentum is 0.59 kgm/s approximately.
Learn more on momentum here: https://brainly.com/question/402617
Preston goes on a camel safari. There, he travels 5 km north, then 3 km east.
7777Answer:
Explanation:
Find the gravitational force between Earth (5.97 x 1024 kg) and the Sun (1.99 x 1030 kg) knowing they are 1.48 x 1011 m apart.
Using the gravitational force of F= G(m1*m2/r^2)
m1= 5.97 x 10^24 kg (Earth)
m2= 1.99 x 10^30 kg (Sun)
r= 1.48 x 10^11 m
G is a known value, it is 6.672 x 10^-11
All units are proper. Therefore plug in the values and you get 3.16 x 10^22 N.
Let me know if I calculated this wrong and it is something else so I can delete this. Thank you. I don't want to make other students put down the wrong answer.
Answer:
[tex]\boxed {\boxed {\sf F_g \approx 3.62 *10^{22} \ N}}[/tex]
Explanation:
We are asked to find the gravitational force between Earth and the Sun. Use the following formula:
[tex]F_g= \frac{Gm_1m_2}{r^2}[/tex]
G is the universal gravitational constant. One mass (m₁) is the Earth and the other (m₂) is the Sun. r is the distance between the planets.
G= 6.67 * 10⁻¹¹ N*m²/kg²m₁ = 5.97 * 10²⁴ kg m₂= 1.99 * 10³⁰ kg r= 1.48 *10¹¹ mSubstitute the values into the formula.
[tex]F_g = \frac{ (6.67*10^{-11} N*m^2/kg^2)(5.97*10^{24} \ kg)(1.99*10^{30} \ kg) }{ (1.48 *10^{11} \ m)^2}}[/tex]
Multiply the numerator. The units of kilograms cancel.
[tex]F_g = \frac {7.9241601 *10^{44} \ N*m^2}{ (1.48 *10^{11} \ m)^2 }[/tex]
Solve the exponent in the denominator.
[tex]F_g= \frac {7.9241601 *10^{44} \ N*m^2}{ 2.1904*10^{22} \ m^2}[/tex]
Divide. The units of meters squared cancel.
[tex]F_g=3.61767718 *10^{22} \ N[/tex]
The original values all have 3 significant figures, so our answer must have the same. For the number we found, that is the hundredth place. The 7 in the thousandth place tells us to round the 1 up to a 2.
[tex]F_g \approx 3.62 *10^{22} \ N[/tex]
The gravitational force between Earth and the Sun is approximately 3.62 *10²² Newtons.
Va A rail wagon of mass
5000 kg moving at a velocity
of 1.6 ms-1 collides with a
stationary wagon of mass
3000 kg (see Figure 4). After
the collision, the 3000 kg wagon
moves away at a velocity of
1.5 ms-1. Calculate the speed
and direction of the 5000 kg
wagon after the collision.
Answer:
0.7m/s
Explanation:
According to the conservation of linear momentum, the moment before a collision is equal to the moment after the collision. The equation is written as follows: [tex]m_{a}u_{a} + m_{b}u_{b} = m_{a}v_{a} + m_{b}v_{b}[/tex], where [tex]m[/tex] is the mass of the object, [tex]u[/tex] is the initial velocity, and [tex]v[/tex] is the final velocity.
Let's say the object [tex]a[/tex] is our moving wagon and the object [tex]b[/tex] is our stationary wagon. [tex]m_{a} = 500kg, u_{a} = 1.6ms^{-1}[/tex], [tex]m_{b} = 3000kg, u_{b} = 0[/tex], since the wagon is stationary, it doesn't have any initial velocity. After collision, the mass remains the same, but the velocity changes: [tex]v_{a} = ?, v_{b} = 1.5ms^{-1}[/tex]
We can observe that [tex]v_{a}[/tex] is what we're looking for according to the question. Now let's substitute our values.
[tex](5000 * 1.6) + (0) = 5000v_{a} + (3000 * 1.5)[/tex]
[tex]v_{a} = \frac{(5000 * 1.6) - (3000*1.5)}{5000}[/tex] = 0.7m/s
How many neutrons are in an atom of Carbon-13 or (613C)?
Answer: 6 OR 7
Explanation:
Suppose two objects are gravitationally attracted to each other with some force F. If the mass of object 1 is multiplied by a factor of five and the mass of object 2 is multiplied by a factor of two, what will the new gravitational force be between the objects?
A. F2
B. 1/2F
C. 0.1F
D. 2F/5
E. 5F
J. 10F
Please help will mark brainliest
If F = Gm₁m₂/d², and we change m₁ to 5m₁ and m₂ to 2m₂, then the new magnitude of the gravitational force is
F' = G (5m₁) (2m₂) / d²
F' = 10 Gm₁m₂ / d²
but this is really just F' = 10F. So J is the correct choice.
Hi there!
Using Newton's Law of Universal Gravitation:
[tex]\large\boxed{F_g = G\frac{m_1m_2}{d^2}}[/tex]
Fg = Force of gravity (N)
G = Gravitational Constant
m₁ = mass of object 1 (kg)
m₂ = mass of object 2 (kg)
d = distance between the objects (m)
There is a direct relationship between the masses of the objects and the resulting force of gravity, so we can plug new values in:
[tex]F_g = G\frac{5m_12m_2}{d^2}} = 10G\frac{m_1m_2}{d^2}} = 10F_g[/tex]
Thus, the correct answer is J. 10Fg.