Answer:
Electromagnetic induction is a phenomenon in which a changing magnetic field across a loop of wire results in the generation of an induced emf. When there is relative motion between a magnet and the coil, magnetic flux changes and hence an electromotive force is generated in the coil.
Which of the following would cause a fan cart to accelerate the least?
- doubling the speed of the fan
- pointing the fan exhaust downward
- tripling the speed of the fan
- pointing the fan exhaust upward
Answer:
The correct option is;
-Pointing the fan exhaust upward
Explanation:
The fan cart transfers reaction force from the jet of air it blows through the exhaust into motion in the opposite direction of the jet. By pointing the fan exhaust upwards, the direction of motion of the cart is therefore, into the ground. Due to the solid nature of the ground the motion is resisted, and by Newton's first law of motion, a body will remain in motion unless resisted by a force. In the case of the question, the ground is resisting the motion of the cart and the cart will remain at rest and having zero acceleration.
5g 508mg
Which one is greater
Answer:
5g
Explanation:
Answer: 5g is greater than 508mg
Explanation:
It's greater because of the units. Although 508 is a larger number, grams are greater that milligrams.
3) Determine how many Altuves you could travel in a day if you were moving at 45.000 mph all day. 1 Altuve=1.65 m. 1 inch=2.54 cm. 1 mile=5280 ft
Answer:
Hey there!
Step one: Find how many miles you can travel per day.
45(24)=1008. You could travel 1008 miles a day.
Step two: Convert 1008 miles to meters.
1008 miles roughly equals 1622219 meters.
Step three: Convert meters to Altuves.
1622/1.65=983.03 Altuves.
Let me know if this helps :)
describe what is inside a spring balance and explain how it works.
Answer:
The spring balance (also known as spring scale) is simply a spring fixed at one end with a hook to attach an object at the other. It works by Hooke's Law, which states that the force needed to extend a spring is proportional to the distance that spring is extended from its rest position.
HOW IT WORKS:
It consists of a spring fixed at one end with a hook to attach an object at the other. It works by Hooke's Law, which states that the force needed to extend a spring is proportional to the distance that spring is extended from its rest position. Therefore, the scale markings on the spring balance are equally spaced.
Electrical equipment should always be properly connected to an electrically neutral source. What is this source called
Answer:
Earth or ground
Explanation:
Earth is the reference point in an electrical circuit from which voltages are measured, it connects the house's electrical system physically to the ground. It functions in a house to ensures that exposed electrical parts do not have a dangerous voltage relative to the Earth, which could cause an electric shock if a grounded person touched them, and also to make sure that the failures of internal insulation triggers protective mechanisms such as fuses or circuit breakers in the circuit to remove power from the device.
Which perspective emphasizes how we store and retrieve information? A. Cognitive behavioral B. Positive psychology C. Biopsychology D. Social
Answer:
a
Explanation:
Convert 142 weeks into years
Answer:
142 weeks/52 weeks per year = 2.7 years
so the answer is 2.7 years
Explanation:
Why do specific heat capacity of objects differ?
A billion years ago, Earth and its moon were just 200000 kilometers apart. Express this distance in meters.
Answer:
The value is [tex]x = 200000000 \ m[/tex]
Explanation:
From the question we are told that
The distance between the earth and the moon is [tex]d = 200000 \ km[/tex]
Generally ,
[tex]1 \ km = 1000 \ m[/tex]
[tex]200000 \ km \to x \ m[/tex]
=> [tex]x = \frac{200000 * 1000}{1 }[/tex]
=> [tex]x = 200000000 \ m[/tex]
It is easier to lift the load as the load is pushed towards the wheel in a wheelbarrow
In a liquid with a density of 1050 kg/m3, longitudinal waves with a frequency of 450 Hz are found to have a wavelength of 7.90 m. Calculate the bulk modulus of the liquid
Answer:jdhddj Nd
Explanation:xbxnbxx period
A car drives at a constant speed of 40 m/s for 1000s how far does it go
Answer:
40,000 meters
Explanation:
We want to find how far the car travels, or the distance. Therefore, we can use the following formula:
[tex]d= s*t[/tex]
where [tex]s[/tex] is the speed and [tex]t[/tex] is the time
The speed of the car is 40 meters per second and the time is 1000 seconds. Therefore,
[tex]s= 40 m/s*\\t=1000s[/tex]
Substitute the values into the formula.
[tex]d= 40 m/s * 1000s[/tex]
Multiply. When you multiply, the 2 "s" variables will cancel out.
[tex]d= (40 m*1000)[/tex]
[tex]d= 40,000 m[/tex]
The distance traveled by the car is 40,000 meters.
How do think animals grow from babies to adults
Answer:
As animals get older, their bodies begin to change as well as their instincts and priorities. They get bigger and might adapt or develop.
If low CVP precipitates a suction alarm, rapid infusion of volume can remedy the situation after dropping the P-level.
True / False.
Answer:
d
Explanation:
Answer:true
Explanation:
Two particles with positive charges q1 and q2 are separated by a distance s. Along the line connecting the two charges, at what distance from the charge q1 is the total electric field from the two charges zero
Answer:
The distance is [tex]z = \frac{1 + \sqrt{ \frac{k * q_2 }{ k * q_1}}}{s}[/tex]
Explanation:
From the question we are told that
The positive charges is [tex]q_1 \ and \ q_2[/tex]
The distance of separation is [tex]s[/tex]
Generally at the point where the electric field is zero would be a point where
The electric field due to [tex]q_1[/tex] = The electric field due to [tex]q_2[/tex]
Generally the electric field due to [tex]q_1[/tex] is mathematically represented as
[tex]E_1 = \frac{k * q_1}{ z^2 }[/tex]
Since we are taking our reference from [tex]q_1[/tex] then the electric field due to [tex]q_2[/tex] is mathematically represented as
[tex]E_2 = \frac{k * q_2}{ (s- z)^2 }[/tex]
So
[tex]\frac{k * q_1}{ z^2 } = \frac{k * q_2}{ (s- z)^2 }[/tex]
[tex]k * q_1 * (s- z)^2= k * q_2 * z^2[/tex]
[tex][ \frac{s -z }{z} ]^2 = \frac{k * q_2 }{ k * q_1}[/tex]
[tex]\frac{s -z }{z} = \sqrt{ \frac{k * q_2 }{ k * q_1}}[/tex]
[tex]\frac{s}{z} - 1 = \sqrt{ \frac{k * q_2 }{ k * q_1}}[/tex]
[tex]z = \frac{1 + \sqrt{ \frac{k * q_2 }{ k * q_1}}}{s}[/tex]
If a 2000 kg car is at rest and a 500 N force is applied to it. What acceleration will it experience?
Ac=v^2/r solve for v, solve for r
Answer:
v = √ac×r
r = [tex]\frac{v^2}{ac}[/tex]
Answer:
Explanation:
Sorry cant help
What is the density of the baseball?
g/cm3
Answer:
0.70 g/cm3
Explanation:
Step 1 : weight ball to get the mass,
step 2 : measure the ball to find the length,
step 3 : multiply the length three times to calculate the volume,
step 4 : divide the mass with the volume to get the density.
Answer: 0.73
Explanation:
Ganymede, one of Jupiter's moons, has a gravitational force of only 0.146 that of Earth. If a space probe with a mass of 126 kg on Earth lands on Ganymede, what would its mass be
Answer:
The mass of the space probe on Ganymede is 126 kg, and its weight is 180.2808 N.
Explanation:
The force of gravity, g, on the earth is 9.8 m/[tex]s^{2}[/tex].
The gravitational force on Ganymede = 0.146 × g
= 0.146 × 9.8
= 1.4308 m/[tex]s^{2}[/tex]
The gravitational force on Ganymede is 1.4308 m/[tex]s^{2}[/tex].
Mass of space probe on Earth is 126 kg.
Weight of the space probe on Earth = m × g
= 126 × 9.8
= 1234.8 kgm/[tex]s^{2}[/tex]
Weight of the space probe on Earth is 1234.8 N.
Since mass is constant, the mass of the space probe on Ganymede is 126 kg.
Weight of the space probe on Ganymede = m × g
= 126 × 1.4308
= 180.2808 kgm/[tex]s^{2}[/tex]
Weight of the space probe on Ganymede is 180.2808 N.
Answer:
126 kg
Explanation:
Mass is a constant for a body, and does not change with location.
SECTION 5 - FORCES
1. In the formula F=ma; state what each of the letters represents and the unit of measurement.
F = _______(_)
m =_______(_)
a = _______(_)
Answer:
F= force(newton or kg*m/s^2)
m=mass(kg)
a=acceleration(m/s^2)
F=ma
kg*m/s^2=kg x m/s^2
kg*m/s^2=kg*m/s^2
Hope this helps ;) ❤❤❤
Answer:
F - Newton
M - Mass
A - Acceleration
Explanation:
yes
The force of gravity pulls down on your school with a total force of 400,000 newtons. The force of gravity pulling down on your school would be exactly twice as much if your school:
Explanation:
It is given that, the force of gravity pulls down on your school with a total force of 400,000 N.
The force of gravity is given by the formula as follows :
F = mg
m is mass and g is the acceleration due to gravity
Mass of an object remains same always. But if the mass of your school becomes twice of the initial mass, the force of gravity pulling down on your school would be exactly twice.
Question 1 of 11
Why is publishing results important in science?
O A. It adds bias to experimental data.
O B. It turns hypotheses into scientific laws.
O C. It lets scientists show off their imaginations.
O D. It allows others to evaluate the results.
Answer:
D. It allows others to evaluate the results.
Explanation:
All the scientists prefer publishing of their research so that scientific and medical community can evaluate the results.
The published research provides instructions or information that allows other researchers to repet the experiment and verify the results. All the scientific publications are based on research and observation which helps other reserachers to refer the published research to find something new.
Hence, the correct answer is "D".
WHAT WAS THE ACCELERATION OF THE CART WITH THE LOW FAN SPEED?
Answer:
18.0 cm/s2
Explanation:
If a positively charged body is moved against an electric field it will gain?
Answer:
positive charge
Explanation:
Electric charge is the physical property of matter that causes it to experience a force when placed in an electromagnetic field. There are two types of electric charge: positive and negative.
hope it helps :)
please mark it the brainliest!
1. Plot the following graphs:
(a) distance –time graph for an object with uniform speed
(b) distance –time graph for an object with non- uniform speed
(c) velocity –time graph for uniform motion of a car
(d) Velocity –time graph for a car moving with uniform accelerations.
(e) Velocity –time graph for a car moving with non- uniform accelerations.
(f) A body at rest
Answer:
(a) The distance-time graph for an object with uniform speed is giving by a straight line sloped graph with a constant positive or negative gradient as shown in the attached diagram
(b) The distance-time graph for an object with non-uniform speed is giving by a curved line sloped graph with varying gradient as shown in the attached diagram
(c) The velocity-time graph for a car with uniform motion is giving by a horizontal line graph at the speed of constant motion with a zero gradient as shown in the attached diagram
(d) The velocity-time graph for a car moving with uniform acceleration is giving by a straight line sloped graph with a constant positive or negative gradient as shown in the attached diagram
(e) The velocity-time graph for a car moving with non-uniform acceleration is giving by a curved line sloped graph with varying gradient as shown in the attached diagram
(f) According to Newton's first law of motion, an object at rest will remain at rest with no motion unless acted by a force, an therefore, will have no motion with time
Explanation:
A steam engine generating 5 hp is raising a load weighing 2000 lb.How high will thebload be raised in 10 s.
Answer:
Explanation:
bi
The height raised by the load is 4.18 m.
Given data:
The power rating of steam Engine is, P = 5 hp = 5 × 745.7 = 3728.5 W.
The weight of load is, W' = 2000 lb = 2000 × 4.45 = 8900 N.
The time interval is, t = 10 s.
We know that the rate of doing any work is known as Power. So here the power will be equal to the work done to raise the load for 10 s of time. Then the expression is,
[tex]P = \dfrac{W}{t}\\\\P = \dfrac{W' \times h}{t}[/tex]
Here, h is the height raised by load.
Solving as,
[tex]3728.5 = \dfrac{8900 \times h}{10}\\\\h = 4.18 \;\rm m[/tex]
Thus, we can conclude that the height raised by the load is 4.18 m.
Learn more about the mechanical power here:
https://brainly.com/question/23138617
A car is traveling with a velocity of 40 m/s and has a mass of 1120 kg. The car has ___________energy. Calculate it.
Answer:
8.9*10^5
Explanation:
as we know that
K.E =1/2 mv²
where m is mass and v is velocity
given mass= 1120 kg
given velocity =40 m/s
so K.E=1/2 (1120)(40)²
K.E=1792000/2
K.E=896000
K.E=8.9*10^5
Answer:
8.9* 10^5
Explanation:
to t
Mass of propane = 4,300 g
Volume of propane = 10,000 mL
The density of liquid(. )
g/mL.
Answer:
Welcome ShalomMHNCB Phx
Explanation:
the answer is because I just had this question and I got it wrong so te answer is 0.43
Answer:
The density of liquid propane is 0.43 g/mL
Explanation:
On EDG
Which of the following is a science? (2 points)
A
Chemistry
B
Anthropology
C
Baseball statistics
D
Art
Chemistry is a subject studied in science.
What is Chemistry?Chemistry is the branch of Physical science, which undergoes the study of composition, structure, function, properties i.e., physical properties and chemical properties of the matter ( Solid, Liquid and Gas ) and the changes it undergoes.
Here, the matter that means that anything that have mass and occupies space.
Some of the branches of chemistry is as follows, Biochemistry, Analytical chemistry, Organic chemistry, Inorganic chemistry, Physical or computational chemistry.
Chemistry also studies the chemical interactions (bonding) between elements, atoms and molecules and also chemistry affects all aspects of life and mostly affects the natural process. Chemical things have been used much in our day today life.
Here, Anthropology is the study of Human beings, Baseball statistics can be studied under game or sports, Art is the study of culture.
Hence, Option A is the correct answer.
Learn more about Chemistry,
https://brainly.com/question/14623424
#SPJ2
Speeding truck slams on the brakes and accelerates at -7.40m/s^2 Before coming to a stop. It leaves skid marks on the pavement that are 43.1m long. How fast was the truck going before it slammed on the breaks?
Answer:
25.2563 m/s
Explanation
This is the equation needed
[tex]$v^2 = u^2 + 2ad$ where v is the final velocity, u is the initial velocity, a is the acceleration, and d the distance[/tex]
So Just plug in!