Answer:
they have same atomic number as they are the same element & electrons
Answer: they both have the atomic (proton number) as they are the same element hence they also they have the same number of electrons. Therefore they have similar chemical properties, as the electrons determine the chemical property of an element.
Explanation: The numbers 35 and 37 are the mass numbers for the two isotopes of chlorine. They both have the same atomic number (proton number ) as they are the same
What is the problem with this chemical equation: H2 + O2 → H2O
Answer:
To make H2O, you need two H and one O. in this equation, you are given two Os which is too many. you'll end up with an extra O. H2 + O2 -> H2O + O
If a car is traveling 100 km/h and comes to a stop in 3 minutes,what is acceleration of a passenger who is using vehicle restraint?
We are given –
Final velocity of car is, v= 0 Initial velocity of car is, u= 100 km/hr Time taken, t is = 3 minutes or 180 secHere–
[tex]\qquad[/tex][tex] \pink{\bf \longrightarrow Initial\: velocity = 100 \:km/hr}[/tex]
[tex]\qquad[/tex][tex] \sf \longrightarrow Initial\: velocity = \dfrac{ 100 \times 1000}{3600} \:m/s[/tex]
[tex]\qquad[/tex][tex]\pink{ \bf \longrightarrow Initial\: velocity = 27.78\: m/s} [/tex]
Now –
[tex]\qquad[/tex]____________________________
[tex]\qquad[/tex][tex] \purple{\bf \longrightarrow Acceleration = \dfrac{Final\: Velocity -Initial \:Velocity }{Time}}[/tex]
[tex]\qquad[/tex][tex] \purple{\bf \longrightarrow Acceleration = \dfrac{v -u}{t}}[/tex]
[tex]\qquad[/tex][tex] \sf \longrightarrow Acceleration = \dfrac{(0- 27.78)}{1800}[/tex]
[tex]\qquad[/tex][tex] \sf \longrightarrow Acceleration =\cancel{ \dfrac{- 27.78}{1800}}[/tex]
[tex]\qquad[/tex][tex] \purple{\bf \longrightarrow Acceleration = -0.015 \: m/s^2} [/tex]
[tex]\qquad[/tex]_______________________________
50 points for anyone who answeres properly. How does a structure of a triglyceride differ from the reaction of fructose?
Triglycerides and fructose are both monomers, but they differ in how they bond to other monomers.
Fructose forms large polymers by the process of hydrolysis, while a triglyceride forms monomers by the process of dehydration.
Fructose is a form of carbohydrate, while a triglyceride is a lipid.
A triglyceride is a polymer, while fructose is a monomer.
Answer:
Fatty Acids
A lipid is an organic compound such as fat or oil. Organisms use lipids to store energy, but lipids have other important roles as well. Lipids consist of repeating units called fatty acids. Fatty acids are organic compounds that have the general formula CH3(CH2)nCOOH" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 17.6px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">CH3(CH2)nCOOHCH3(CH2)nCOOH, where n" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 17.6px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">nn usually ranges from 2 to 28 and is always an even number. There are two types of fatty acids: saturated fatty acids and unsaturated fatty acids.
Saturated Fatty Acids
In saturated fatty acids, carbon atoms are bonded to as many hydrogen atoms as possible. This causes the molecules to form straight chains, as shown in the figure below. The straight chains can be packed together very tightly, allowing them to store energy in a compact form. This explains why saturated fatty acids are solids at room temperature. Animals use saturated fatty acids to store energy.
Figure 14.2.1" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 16px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">14.2.114.2.1: Structures of saturated and unsaturated fatty acids.
Unsaturated Fatty Acids
In unsaturated fatty acids, some carbon atoms are not bonded to as many hydrogen atoms as possible due to the presence of one or more double bonds in the carbon chain. Instead, they are bonded to other groups of atoms. Wherever carbon binds with these other groups of atoms, it causes chains to bend (see figure above). The bent chains cannot be packed together very tightly, so unsaturated fatty acids are liquids at room temperature. Plants use unsaturated fatty acids to store energy.
Figure 14.2.2" role="presentation" style="display: inline-table; font-style: normal; font-weight: normal; line-height: normal; font-size: 16px; text-indent: 0px; text-align: left; text-transform: none; letter-spacing: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">14.2.214.2.2: Saturated fatty acids have only single bonds while monounsaturated fats have one double bond and polyunsaturated fats have more than one double bond.
Lipids and Diet
Unsaturated fat is generally considered to be healthier because it contains fewer calories than an equivalent amount of saturated fat. Additionally, high consumption of saturated fats is linked to an increased risk of cardiovascular disease. Some examples of foods with high concentrations of saturated fats include butter, cheese, lard, and some fatty meats. Foods with higher concentrations of unsaturated fats include nuts, avocado, and vegetable oils such as canola oil and olive oil.
Fructose is a simple carbohydrate sugar, while triglycerides are the lipids or the fats of the body. Thus, option C is accurate.
What are triglycerides and fructose?Triglycerides are lipids of the body that are formed of fatty acids and glycerols. It makes the body fat of the animals and of the plants. They are stored in cells for future use and provide energy when needed.
Fructose is a monomer that is the simplest carbohydrate sugar and is generally found in sugarcane, honey, watermelon, grapes, apples, etc.
Therefore, option C. fructose is sugar and triglyceride is fat is correct.
Learn more about triglycerides and fats here:
https://brainly.com/question/17576593
#SPJ2
How many moles is 2.50 grams of oxygen?
Answer:
Mole is a number that connects mass of a substance with its number of particles. 2500 g of O2 = 1/32 x 2500 = 78.125 moles
Explanation:
have a great day
2. What do acidic solutions have high concentrations of?
Answer:
Explanation:
An acidic solution has a high concentration of hydrogen ions (H +start superscript, plus, end superscript), greater than that of pure wate
What is true about Carbon-14 and Carbon-12?
a. The mass of the Carbon-14 sample is less than the Carbon-12 sample, but the reactivity of both samples was the same.
b. The mass of the Carbon-14 sample is greater than the Carbon-12 sample, but the reactivity of both samples was the same .
c. The reactivity of the Carbon-14 sample is less than the Carbon-12 sample, but the mass of both samples was the same.
d. The reactivity of the Carbon-14 sample is greater than the Carbon-12 sample, but the mass of both samples was the same.
Answer:
B.
Explanation:
Correct: b. The mass of the Carbon-14 sample is greater than the Carbon-12 sample, but the reactivity of both samples was the same .
- C-14 has two additional neutrons, so is heavier than C-12. The chemical properties will be the same, however.
What do you think will happen to the Sun when all the hydrogen in it fuses to become helium?
Answer: In the core of the Sun hydrogen is being converted into helium. This is called nuclear fusion. It takes four hydrogen atoms to fuse into each helium atom. During the process some of the mass is converted into energy.
During the Cellular Respiration reaction glucose reacts with oxygen gas
to form water and Carbon Dioxide. How much carbon Dioxide would be formed from 58 grams of glucose?
try putting 66 grams CO2 for answer
hydrogen ions ________ acidity of the water which is a key point.
Answer:
Raise
Explanation:
H+ ions are acidic and lower the PH of water.
Iron reacts with oxygen and water to create rust and hydrogen gas as shown in the chemical equation. What mass of rust, to the nearest hundredth gram, is produced in this reaction?
A) 4.3 g
B) 5.8 g
C) 16.8 g
D) 29.4 g
Answer:
i think its 5.8
Explanation:
What was boyle’s most famous discovery about gases?
Answer:
Boyle's most famous discovery had to do with how the pressure and volume of gases relate, either this or he discovered the volume of a gas decreases with increasing pressure...
Explanation:
...
nomenclature of this compound
spammers will be reported
Answer:
Nomenclature is the process of naming chemical compounds with different names so that they can be easily identified as separate chemicals. ... For example, organic compounds include molecules with carbon rings and/or chains with hydrogen atoms (see picture below).01-Jul-2014
Nomenclature: Iron (II) Chloride
Compound: FeCl2
Would you expect the shielding effect to be greater in bromine than in chlorine?
A. Yes, because there are more filled orbitals in bromine.
B. Yes, because bromine has a higher atomic number.
C. No, because they are both in the same family.
D. No, because chlorine has a higher electronegativity than bromine.
The shielding effect of bromine is greater than chlorine because there are more filled orbitals than in chlorine.
Shielding EffectThis is the process where by electrons are protected by the pull attraction of the nucleus with the use of electron shells. The shielding effect increases down the group of the periodic table and increases across the period. This is because when you move down the group, there's an increase in the number of shell by 1 and it helps to reduce the effect of nuclear attraction on the electrons. However when you move across the period, there's an increase in the numbers of electron with the same shielding electrons from group 1(a) across the period to group 7(a).
Factor that affect the shielding effect of an electronThe numbers of electrons on the inner shells.Type of orbital which the electron is located.Shielding effect is primarily dependent on the numbers of electrons in the inner shells as well as the type orbitals.
Learn more about shielding effect here;
https://brainly.com/question/14040040
https://brainly.com/question/2984106
NEED HELP ASAP!!! TYSM!!!! What are the coefficients when the following equations are balanced?
__CH4 + __O2 --> __CO2 + __H2O
__Fe + __O2 --> __Fe2O3
Two samples of solids have similar reactivity with acids and similar densities. Their masses
and volumes, however, are not at all similar. Is it possible that these are the same
substance? (1 point)
O. No, it is not possible because they have different extensive properties.
O Yes, it is possible because they have similar intensive properties.
O Yes, it is possible because they have similar extensive properties.
O No, it is not possible because they have different intensive properties.
They may be the same substance even though they have different volumes and masses.
Intensive properties are the properties are characteristic a substance. Intensive properties are those properties of a substance that can be used to describe the substance.
We can see that the substances have similar reactivity and similar density. This means that they may be the same substance even though they have different volumes and masses.
The correct option is; "Yes, it is possible because they have similar intensive properties."
Learn more: https://brainly.com/question/17323212
4. A photon has an energy of 2.93x10^-25 Jouls. What is the
frequency? What is the wavelength in nm?
Answer:
Hope this answer helps
Explanation:
Please help !!!!!!!!
1) Write the equation for the reaction between the hydrocarbon and bromine using fully displayed formulae for the hydrocarbon and the organic product.
2) The reaction between methane and bromine gas in the presence of UV light also causes the bromine to lose color.
(a) Write an equation for this reaction
(b) This reaction is described as a substitution reaction. whereas the reaction between X and bromine is an addition reaction. Using the equations you have already written , explain the difference between addition and substitution
how would you expect the solubility of barium sulfate in pure water to compare to its solubility in 0.10 m nacl
Answer:
barium sulfate is insoluble (unable to dissolve) in water.
the general equation for the reaction between solid barium sulfate and nacl solution is this:
BaSO4 (s) + 2NaCl (aq) --> BaCl (aq) + Na2SO4 (aq)
to sum this up, to compare the solubility,
1. barium sulfate cant dissolve in pure water.
2. barium sulfate dissolves in nacl solution to give aqueous (aq) barium chloride (bacl) and aqueous sodium sulfate (na2so4), as shown in the equation above.
good luck!
The solubility of barium sulfate in pure water to zero as compare to the solubility in NaCl solution.
What is solubility?
Solubility is a property of any substance that defines how easily can be any substance will get dissolved or show dissolution.
Barium sulphate is insoluble in water beacuse it has higher lattice energy as well as higher size of cations & anions as compare to water, due to which water is not able to attract these ions towards itself affectively.Barium sulphate is soluble in the NaCl solution as this solution having ions which have more power to attract the ions of barium sulphate and show dissolution. Chemical reaction for this will be represented as:BaSO₄ (s) + 2NaCl (aq) → BaCl (aq) + Na₂SO₄ (aq)
Hence, barium sulphate is insoluble in water.
To know more about solubility, visit the below link:
https://brainly.com/question/16903071
PLEASE PEOPLE I NEED HELP PLEASE IF YOU SEE THIS HELP ME ! :,( !!!!! PLEASEEEEEEEEE
PLEASE NO LINKSSS !!!!! HELP ME THIS ITS FOR HOMEWORK PLEASE HELPP!
Answer:
year 1 is 5.5%
year 2 is 7.5%
year 3 is 10.2%
Explanation:
since,
length of the transect covered in seaweed / total lenth of transect x 100
then,
0.55 / 10.0 x 100 = 5.5
and
0.75 / 10.0 x 100 = 7.5
and
1.02 / 10.0 x 100 = 10.2
you could also just move the decimal to the right once
:)
Can anyone help me? I will try to give brainliest.
Answer:
Looking at the table, Silver is definitely the most conductible metal there. It has the lowest electrical resistivity which means it allows for an easier flow of electrons, and it also has a higher thermal conductivity which means it would exhibit a higher conductivity. Diamond has the highest thermal conductivity, but the electrical resistivity is extremely high and due to its giant covalent/tetrahedral molecular structure (being an allotrope of Carbon), electrons can't necessarily jump around. Diamond wouldn't be a conductor at all.
The most simplest composition and structures provide a higher thermal conductivity. For example, with Diamond, we know that it is a structure made of covalent bonds of carbon, so its thermal conductivity is high.
Answer:
Q1
Copper
Explanation:
Copper is a good conductor of electricity, its resistance is high, and its chemical activity is weak
Q2
The thermal conductivity of a specific material is highly dependent on a number of factors. These include the temperature gradient, the properties of the material, and the path length that the heat follows.
what is the relationship between electron affinity and atomic radius? why do you think this relationship occurs?
which are the only two elements liquid at room temperature?
Answer:
mercury and bromine are the only two elements
Look at the diagram below. What type of bond does it show?
Explanation:
it shows covalent bonds
The type of bond the diagram shows is covalent bond. As shown the sharing of electrons in the diagram.
What are bonds?Bonds are defined as any of the interactions that lead to atoms joining together to form molecules, ions, crystals, and other stable species that make up the familiar materials found in everyday life. The ability to build molecules is made possible by a chemical bond, which is a strong attraction between atoms, ions, or molecules. Chemical bonds that hold molecules together also form temporary connections vital for life.
Covalent bond are defined as a type of chemical link where atoms share electrons to create electron pairs. Low melting and boiling temperatures, low vaporization heat, low water solubility, and poor conductivity are four characteristics of covalent compounds.
Thus, the type of bond the diagram shows is covalent bond. As shown the sharing of electrons in the diagram.
To learn more about bonds, refer to the link below:
https://brainly.com/question/13559044
#SPJ2
who is credited with developing the periodic table
Answer:
Dimitri mendleev and Albert something. I forgot his last name. I think ghorso. Albert ghorso.
Write the scientific term "A number used by Bohr in the explanation of the spectrum of hydrogen atom and designated by the symbol (n) " ?
Answer:
Quantum number
Explanation:
The chemical equation below shows the decomposition of ammonium nitrate (NH4NO3). NH4NO3 Right arrow. N2O 2H2O A chemist who is performing this reaction starts with 160. 1 g of NH4NO3. The molar mass of NH4NO3 is 80. 03 g/mol; the molar mass of water (H2O) is 18. 01 g/mol. What mass, in grams, of H2O is produced? 9. 01 18. 01 36. 03 72. 6.
The mass of water, H₂O produced from the reaction is 72.06 g
We'll begin by calculating the mass of NH₄NO₃ that reacted and the mass of H₂O produced from the balanced equation.
NH₄NO₃ —> N₂O + 2H₂O
Molar mass of NH₄NO₃ = 80.03 g/mol
Mass of NH₄NO₃ from the balanced equation = 1 × 80.03 = 80.03 g
Molar mass of H₂O = 18.01 g/mol
Mass of H₂O from the balanced equation = 2 × 18.01 = 36.02 g
From the balanced equation above,
80.03 g of NH₄NO₃ reacted to produce 36.02 g of H₂O
Finally, we shall determine the mass of H₂O produced by the reaction of 160.1 g of NH₄NO₃.
From the balanced equation above,
80.03 g of NH₄NO₃ reacted to produce 36.02 g of H₂O.
Therefore,
160.1 g of NH₄NO₃ will react to produce = (160.1 × 36.02) / 80.03 = 72.06 g of H₂O.
Thus, the mass of water, H₂O produced from the reaction is 72.06 g
Learn more on stiochoimetry: https://brainly.com/question/15048051
Compounds have the same physical and chemical properties as the elements they are made from? True or false?
The statement that compounds have the same physical and chemical properties as the elements they are made from is false.
CompoundsCompounds are substances formed when two or more elements are chemically combined together.
For example, water is a chemical compound formed when hydrogen and oxygen are chemically combined in a ratio of 2 to 1.
Properties of compoundsThey formation of compounds involves great heat changesThey can be represented by a chemical formula They have properties different from those of the constituent elementsTherefore, the statement that compounds have the same physical and chemical properties as the elements they are made from is false.
Learn more about compounds at: https://brainly.com/question/10942055
Let’s Apply B
Directions: Identify the stages in the life cycle of a frog that is being described.
Give the correct answer that is being described.
NONSENSE = REPORT
PLEASE PA SAGOT !!!!!
Answer:
b a c a b
Explanation:
Which of the following is an oxidation-reduction reaction? Fe2O3 3CO Right arrow. 2Fe 3CO2 CuSO4 2NaOH Right arrow. Cu(OH)2 Na2SO4 2NaOH H2CO3 Right arrow. Na2CO3 2NaOH Pb(NO3)2 Na2SO4 Right arrow. 2NaNO3 PbSO4.
The reaction, Fe2O3 + 3CO------> 2Fe + 3CO2 is an oxidation-reduction reaction.
An oxidation-reduction reaction is a reaction in which there is a change in oxidation number from left to right in the reaction. This is because, a specie is oxidized and another specie is reduced.
In the reaction; Fe2O3 + 3CO------> 2Fe + 3CO2, we can see that the oxidation number of iron decreased from +3 on the left hand side to zero on the right hand side. The oxidation number of carbon was increased from + 2 to +4.
Learn more: https://brainly.com/question/10079361
Answer:
A
Explanation:
EDGE2022
PLEASE PEOPLE I NEED HELP PLEASE IF YOU SEE THIS HELP ME ! :,(
NO LINKS !!!! PLEASE :)
Answer: 5.5 7.5 102
Explanation: using the equation above you can get these %s