Answer:
The mass number of an isotope is indicated in the name of the isotope by writing the name of the element followed by a hyphen and the mass number.
Explanation:
Examples include carbon-14, uranium-235, and oxygen-17.
how can you test a sample of soil for acidity or alkalinity
Answer:
Scoop a soil sample into a fresh container, add 1/2 cup of water, and mix. Then, add 1/2 cup of baking soda. If the soil bubbles or fizzes, the soil is acidic. The reaction you're seeing is the result of acidic soil coming into contact with an alkaline substance (baking soda).
Explanation:
Hope this helped!
what is the density of a 100g piece of titanium if a 10g piece of titanium has a density of 4.506g/cm3?
Possible answers:
A: 45.06g/cm3
B:4.506g/cm3
C: 9.1g/cm3
D: 91g/cm3
Answer:
B. Density stays the same no matter how much of a substance there is.
Explanation:
Density of the substance is the same and it is the measure of its mass per unit volume. Thus, the mass of titanium per 1 cm³ is 4.506 g which is the same for 10 g, 100 g or whatever the mass.
What is density ?Density of a substance is the measure of its mass per unit volume. It describes how closely its particles are packed. Density of an object depends on its bond type, temperature and pressure.
The more denser the object is , more will be its mass distribution per unit volume. Substances denser than water will sink on it otherwise they float on water.
Density is constant for a substance, the distribution of given mass per unit volume is same for all masses. Hence, the density of 100 g Ti is same as that of 10 g. i.e., 4.56 g/cm³.
To find more on density, refer here:
https://brainly.com/question/15164682
#SPJ2
How many orbitals surround the nucleus in a neutral atom of sulfur (S)?
1
3
5
6
What igneous rock is non-vesicular and glassy in texture and has a mafic composition?
Answer:
igneous rock
Explanation:
A bus travels a distance 150km
in 5 hours where as another bus travel 200km in
6 hours which bus travel fast
Answer: The bus traveling 200km in 6 hours is traveling the fastest.
Explanation:
Bus 1
150km/5hrs
Simplify -> 30km/hr
Bus 2
200km/6hrs
Simplify -> About 33.333km/hr
12.
Contrast and compare:
a) ionic and covalent bonding
Answer:
Ionic bonds - an intramolecular force exist in a nonmetal and metal compounds such as NaCl. The Na donate 1 electon to Cl to complete its octet rule.
Covalent bond - an intramolecular force exist in a nonmetal and nonmetal compounds such as bonds O2, Cl2, CO2, sugar, proteins and most of organic compounds and biomolecules by sharing electrons to bond.
There are two types of covalent bonds: polar and nonpolar. Polar bond is a bond between two different nonmetal atoms of different electronegativities. While nonpolar bond is a bond between the same atom or two differenct atoms of the same electronegativities (if there is). Their electronegativities pull will cancel so that their overall polarity is zero.
Why are flowers brightly colored?
Answer: In order to help the plants reproduce, flowers that are bright in color are meant to attract birds, bees and other insects. In the genetics of a flower, bright or dull colors are set in
Explanation:
helppppp. which of the following statements regarding physical and chemical changes is true? a. both physical and chemical changes alter the atomic structure of a substance. b. neither physical not chemical changes alter the atomic structure of a substance. c. physical changes alter the atomic structure of a substance, while chemical changes do not. d. chemical alter the atomic structure of a substance, while physical changes do not. huryyyy
Answer:
B
Explanation:
I did it
Neither physical not chemical changes alter the atomic structure of a substance. The correct option is b.
What are chemical changes?When one chemical substance is transformed into one or more different substances, such as when iron becomes rust, a chemical change occurs.
Chemical changes occur as a result of chemical reactions, and the resulting substances have different properties due to the different arrangements of their atoms and molecules.
Physical changes affect a chemical substance's form but not its chemical composition.
Physical changes can be used to separate mixtures into their component compounds, but not to separate compounds into chemical elements or simpler compounds.
Physical or chemical changes have no effect on a substance's atomic structure.
Thus, the correct option is b.
For more details regarding chemical changes, visit:
https://brainly.com/question/23693316
#SPJ6
Can the process of rusting be called combustion?
Answer:
no the answer is oxidation
1.Which statement(s) is/are true about a divergent plate boundary? Check all that apply.
A.new crust is created here
B.an ocean trench is found here
C.a rift valley is associated with this boundary
D.subduction occurs at this boundary
E.a mid-ocean ridge is found at this boundary
F.San Andreas is an example of this type of boundary
G.sea floor spreading occurs here
--------------------------------------------------------------------------------------------------------------------------------
2.Which statement(s) is/are true about a transform plate boundary? Check all that apply.
A.an ocean trench is found here
B.earthquakes frequent this boundary
C.subduction occurs at this boundary
D.two plates are sliding past each other
E.San Andreas is an example of this type of boundary
F.an ocean trench is found here
--------------------------------------------------------------------------------------------------------------------------------
3.Which statement(s) is/are true about a convergent plate boundary? Check all that apply.
an ocean trench is found here
a rift valley is associated with this boundary
subduction occurs at this boundary
volcanic island chain might occur here
folded mountains might form here
earthquakes might occur here
San Andreas is an example of this type of boundary
--------------------------------------------------------------------------------------------------------------------------------
SINCE THIS IS ALOT OF THINKING I AM GIVING A GOOD AMOUT OF POINTS.....
PLEASE DONT SCAM AND STEAL THE POINTS
Answer:
I know the first one is c or e but i not sure what the others are, the second one is- wait are you sure your in 6th grade lol? I dont remember learning this
Answer:
OMG ITS MEHH
Explanation:
According to the periodic table, the neutral atom of what element has 4
protons, 5 neutrons, and 4 electrons?
Answer:
Beryllium
Explanation:
Given parameters:
Number of protons = 4
Number of neutrons = 5
Number of electrons = 4
Unknown:
Element = ?
Solution:
To determine an element, the atomic number is the most important identifier.
The atomic number is the number of protons in an atom.
Since the atom here has a proton number of 4, checking on the periodic table, it is Beryllium, Be
Which is more electrically negative? 1)C 2)P or 3)S
GUYS PLEASE HELP!!! :((
Answer:
3 sulphur is more electrically –
SOMEONE HELP ME PLEASE ILL GIVE BRAINLY!
Is the following picture an example of a chemical change or a physical change?
A chemical change, because the atoms are rearranging to form new molecules.
A physical change, because the molecules are staying the same.
A chemical change, because the molecules are staying the same.
A physical change, because the atoms are rearranging to form new molecules.
Answer:
It would be a physical change, because the atoms are rerranging to form new molecules!
Explanation:
What causes rain to precipitate from clouds?
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation: Have a blessed day!
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation:hope this helps u
I WILL GIVE BRANLIEST What factor is the temperature in an ecosystem? Abiotic or Biotic?
Answer:abiotic .
Explanation:
A very hot cube of copper metal (32.5 g) is submerged into 105.3 g of water at 15.4 0C and it reach a thermal equilibrium of 17.3 0 Calculate the initial temperature of copper (Cs = 0.385 J/g 0C for copper, and 4.18 J/g 0C for water).
Answer:
The initial temperature of the metal is 84.149 °C.
Explanation:
The heat lost by the metal will be equivalent to the heat gain by the water.
- (msΔT)metal = (msΔT)water
-32.5 grams × 0.365 J/g°C × ΔT = 105.3 grams × 4.18 J/g °C × (17.3 -15.4)°C
-ΔT = 836.29/12.51 °C
-ΔT = 66.89 °C
-(T final - T initial) = 66.89 °C
T initial = 66.89 °C + T final
T initial = 66.89 °C + 17.3 °C
T initial = 84.149 °C.
Question 14
1 pts
How many moles of NaCl could be found in 0.4 L of a 0.9 M solution? Round your answer to
two decimal places.
Answer:
0.36mol
Explanation:
Given parameters:
Volume of NaCl = 0.4L
Molarity = 0.9M
Unknown:
Number of moles = ?
Solution:
To find the number of moles, the molarity of a solution is the amount of solute contained in a solution.
Molarity = [tex]\frac{number of moles}{volume}[/tex]
Number of moles = molarity x volume
Insert the parameters and solve;
Number of moles = 0.4 x 0.9 = 0.36mol
please help me..........
Answer:
4/6
6/9
8/12
Explanation:
What is Jadi? is it goat? what language is Jadi?
If all objects masses are the same, then the object with the least ___ is the densest?
Possible Answers:
A: Mass
B: Volume
C: Weight
D: Density
Answer:
its weight
Explanation:
mass is how much space it takes up the volume stays the same density is what happens after so its weight
When you climb to the top of a water slide, you are gaining:
O A. gravitational kinetic energy.
B. chemical potential energy.
c. gravitational potential energy.
D. chemical kinetic energy.
Answer:
C
Explanation:
You climbing the water slide gives you potential energy and your building gravitational eneergy.
When we climb the top of a water slide we are gaining gravitational kinetic energy. That is we are moving through the surface and thus we experience both kinetic energy and gravitational energy.
What is kinetic energy?Kinetic energy of a body is generated by virtue of its motion. Gravitational energy is a form of energy by which the an object attracts other object to its center of mass. Both forms of energy are directly proportional to the mass of the object.
Potential energy is generated by virtue of the position and height of the object. As the height from surface increases, potential energy increases. Potential energy and kinetic energy together called as mechanical energy of an object.
When starts moving our potential energy is converting to kinetic energy. Hence, when we climb the top of a water slide kinetic energy starts to increase. Thus, option A is correct.
To find more on kinetic energy, refer here:
https://brainly.com/question/26472013
#SPJ2
PLEASE HELP!!!!!!!!
Step 4: Create Lewis dot diagrams.
a) Draw Lewis dot diagrams of the reactants and products on the paper with your chemical equation.
b) Select a different color to use for each element in the chemical reaction. Use your chosen color
for the element’s symbol and for its valence electrons.
c) Label these diagrams “Lewis Dot Diagrams.”
Answer:
Hey student your question is not proper arrange, i don't understand what you want us to do
how do i do the chemicals
you have to put them togeter
List and define the 3 parts of a chemical equation (R->P).
Answer:
R- reactants
arrow- yields
p- products
Explanation:
In your own words, please explain how to name acids.
Answer:
Acids are named based on their anion — the ion attached to the hydrogen. In simple binary acids, one ion is attached to hydrogen. Names for such acids consist of the prefix “hydro-“, the first syllable of the anion, and the suffix “-ic”. Complex acid compounds have oxygen in them.
The sum of the protons and neutrons in an atom equals the?
nucleus number
atomic number
atomic mass
mass number
Answer:
mass number
Explanation:
The sum of the protons and neutrons in an atom equals the mass number of such an atom.
Mass number is the mass of an atom. The mass of an atom is concentrated in the nucleusThe particles in the nucleus are the protons and neutrons.So;
Mass number = number of protons + number of neutrons.
Potato strips placed in a container of concentrated salt water will ultimately __.
Answer:
00000
Explanation:
Benzoic acid, C6H5COOH, is another derivative of benzene. The pH of an aqueous solution of benzoic acid at 298 K is 2.95. Determine the concentration of hydroxide ions in the solution,
Answer:
[OH⁻] = 8.91x10⁻¹²M
Explanation:
In aqueous solutions, the [OH] and [H⁺] are associated in the equation of hydrolisis of water:
1x10⁻¹⁴ = [OH⁻] [H⁺]
With pH, we can solve for [H⁺] and obtain, the [OH⁻] using this equation:
pH = -log [H⁺]
[H⁺]= 10^-pH
[H⁺] = 1.122x10⁻³M
1x10⁻¹⁴ = [OH⁻] [1.122x10⁻³M]
[OH⁻] = 8.91x10⁻¹²MUnder a certain set of conditions, the percent yield of a reaction that produces carbon dioxide is 75.0%. What mass in grams of CO2 will actually be recovered if the theoretical yield is 26.7 grams?
Answer:
Actual yield = 20.03g
Explanation:
[tex]% yield = 100.\frac{actual yield}{theoretical yield}[/tex]% [tex]yield[/tex] = [tex]100. \frac{actual \ yield}{theoretical \ yield}[/tex]
Actual yield = % yield.(theoretical yield) / 100
Actual yield = 75.26.7/100
Actual yield = 20.025
Answer: I got 20.025 and then I rounded it to 20.0
Explanation:
A wave is a _____that transfers _____ through a ______
A.) medium, disturbance, energy
B.) disturbance, energy, medium
C.) energy, disturbance, medium
D.)disturbance, medium, energy
A wave is a disturbance that transfers energy through a medium. There
are types of such as sound and light waves.
A wave involves the transfer of energy such as sound, light waves etc
through a medium. The medium could be through liquids , solids or air and
they have characteristic waves which pass through them.
When a wave transfers energy through a medium, the matter involved
doesn't experience any type of movement.
Read more on https://brainly.com/question/19210453
I WILLL GIVE YOU BRAINLYESTTT PLEASE HELPPPP
Answer:
10.99s
Explanation:
Given parameters:
Speed of the fly = 9.1m/s
Distance flown = 100m
Unknown:
Time taken to fly this distance = ?
Solution:
Speed is distance divided by the time;
Mathematically;
Speed = [tex]\frac{distance}{time}[/tex]
Time = [tex]\frac{distance}{speed }[/tex]
Insert the parameters and solve;
Time = [tex]\frac{100}{9.1}[/tex] = 10.99s