Answer:
Taking the animal kingdom as an example, we can see that it is split into two clear groups: Invertebrates - animals without a backbone. Vertebrates - animals with a backbone.
Explanation:
Please show your work if possible!
Answer:
54.93 g/mol
Explanation:
a) the element with symbol Mn is known as Manganese and I figured it out by looking at the periodic table.
b) I took a look at the periodic table again, and seen how much the atomic mass is and from there I observed:
Mn= 54.938 g/mol
rounded is 54.94 g/mol
Calculate how many grams of sodium chloride we would need to make a solution with the same molarity of seawater, which is about 0.598 M.
Answer:
34.92 grams NaCl (in 1 L of solution)
Explanation:
The chemical formula of sodium chloride is NaCl. From the formula, we can calculate the molar mass of NaCl:
MM(NaCl)= MM(Na) + MM(Cl) = 23 g/mol + 35.4 g/mol = 58.4 g/mol
A solution of NaCl with a molarity of 0.598 M has 0.598 moles of NaCl per liter of solution. So, we multiply the moles by the molar mass of NaCl to calculate the mass we need:
mass of NaCl = 0.598 mol x 58.4 g/mol = 34.92 g NaCl
Therefore, we need 34.92 grams of NaCl to prepare 1 liter of a solution with a molarity of 0.598 M.
A gas diffuses 1/6 times faster than hydrogen gas (H2).
What is the molar mass of the gas? (5 points)
a
59.95 g/mol
b
66.54 g/mol
c
68.68 g/mol
d
72.58 g/mol
Answer:
72.58 g/mol
Explanation:
mark me brainless if I am ✅
The relationship between the rate of diffusion and the molar mass is given by Graham's law. A gas diffusing 1/6 times faster than hydrogen will have a molar mass of 72.58 g/mol. Thus, option d is correct.
What is Graham's law?Graham's law states the inverse relationship between the rate of diffusion and the square root of the molar mass of the gas. It is given as,
Rate = 1 ÷ √M
The molar mass of the gas that diffuses 1/6 times faster than hydrogen is calculated as,
R₁ ÷ R₂ = √ (M₂ ÷ M₁)
Here,
The molar mass of hydrogen = M₁
The molar mass of unknown gas = M₂
Rate of diffusion of hydrogen gas = R₁
Rate of diffusion of unknown gas = R₂ = 1 / 6 R₁
Substituting values:
R₁ ÷ 1/6 R₁ = √M₂ ÷ 2
6 × 1.414
= 8.485
= 84.85 g/mol ≈ 72.58 g/mol
Therefore, option d. 72.58 g/mol is the molar mass of unkown gas.
Learn more about Graham's law here:
https://brainly.com/question/19589867
#SPJ5
Which of the following is a property of carbon atoms?
They are chemically inert.
They have six valence electrons.
They readily give up two electrons
They are found in all living things.
They are found in all living things. Hence, option D is correct.
What is an atom?An atom is any particle of matter which contains at least one proton.
Carbon is stored in plants and trees. Plants take carbon dioxide from the atmosphere to make the building blocks of food during photosynthesis. Carbon is stored in the hydrosphere and dissolved in ocean water and lakes. Carbon is used by several organisms to produce shells.
Hence, option D is correct.
Learn more about atom here:
https://brainly.com/question/1566330
#SPJ5
Prokaryotic and eukaryotic cells have many different characteristics. One difference
between prokaryotic and eukaryotic cells is that all eukaryotic cells —
Answer:
Have a nucleus
Explanation:
Pls check..
Need help on this question asap pleasee
Answer:
9.0 moles of CaO
Explanation:
We have the reaction equation as follows;
Fe2O3 + Ca3(PO4)2 -------> 2FePO4 + 3CaO
Now we know from the equation that;
1 mole of iron III oxide yields 3 moles of CaO
Therefore;
3 moles of iron III oxide yields 3 * 3/1
= 9.0 moles of CaO
Answer is C
Zeke is attempting to react a piece of magnesium metal with sulfuric acid. The sulfuric acid is a 5M solution. What could Zeke do
to slow down the rate at which the magnesium will react with the acid?
A)
increase the temperature
B)
add a 10M sulfuric acid solution
9)
add water to the acid to decrease its molarity
D)
add more of the 5M sulfuric acid to the reaction
Answer:
c)
Explanation:
add water to the acid to decrease its molarity
You can prepare a buffer solution by combining equal moles of which pair of substances?
A. weak acid and its conjugate base
B. strong acid and a strong base
C. strong base and its conjugate acid
D. salt and a weak acid
Answer:
A. weak acid and its conjugate base
Explanation:
A buffer solution can be made with a weak acid and conjugate base or a weak base and conjugate acid.
This may help you:
https://chem.libretexts.org/Bookshelves/Physical_and_Theoretical_Chemistry_Textbook_Maps/Supplemental_Modules_(Physical_and_Theoretical_Chemistry)/Acids_and_Bases/Buffers/Introduction_to_Buffers
Mendel crossed tall pea plants with short pea plants. the offspring were all tall plants.
1. Which allele is recessive?
2. Which allele is dominant?

please hurry

Answer:
1. Allele for shortness (t)
2. Allele for tallness (T)
Explanation:
Gregor Mendel performed numerous experiments using pea plants (Pisium sativum). He tested the height traits of pea plants by crossing tall pea plants (TT) and short pea plants (tt) to obtain offsprings that were all tall (Tt) in the first filial generation (F1).
This is possible because the allele for tallness is DOMINANT while the allele for shortness is RECESSIVE. This means that tallness allele (T) will mask the phenotypic expression of shortness allele (t) when in an heterozygous state (Tt) as in the F1 generation.
Agustina was standing on the edge of a cliff of unknown height holding a bowling ball. She wanted to find the height of the cliff. She worked with Maite to time the how long the bowling took to fall to the bottom of the cliff. Maite timed the drop at 9.4 seconds on each of their 10 trials. The bowling ball started at rest on each of the trials. What distance did the bowling ball fall in each trial?
Answer:
433 m
Explanation:
Since the fall represents motion under gravity, we use the equation
s = ut - 1/2gt² where s = height of cliff or distance bowling ball falls through, u = initial velocity of bowling ball = 0 m/s(since it starts from rest), t = time = 9.4 s and g = acceleration due to gravity = -9.8 m/s².
So, substituting the values of the variables into the equation, we have
s = 0 m/s × 9.4 s - 1/2 × 9.8 m/s² × (9.4 s)²
s = 0 m - 1/2 × -9.8 m/s² × 88.36 s²
s = 1/2(865.928 m)
s = 432.964
s ≅ 433 m
Explain to the people of Westfield what is in their water.
The presence of rust in the water of Westfield is the reason for the change in colour.
Reason for reddish colour of waterThe water of Westfield has reddish-brown substance. This reddish brown substance in the water is the rust which formed due to the chemical reaction between the iron pipes and the fertilizer substance present in the water.
Due to this reaction, the colour of Westfield's water is different from normal type of water so we can conclude that the presence of rust in the water of Westfield is the reason for the change in colour.
Learn more about rust here: https://brainly.com/question/1477535
If two half lives have passed since a scientist collected a 1.00- gram sample of a U-235, how much U-235 is left now?
answers for most finals chem test questions (10th)
Answer:
one quarter of the original amount, so 0.25 g
Explanation:
Answer:
C
Explanation:
Using the balanced equation for the next few questions: 4 Fe(s) + 30 (9) - 2Fe2O3(s)
How many moles of Iron (11) Oxide would be produced by complete reaction of 0.15
moles of iron? (Be sure to show your work including the mole ratio you used)
Answer:
0.075 moles of iron oxide would be produced by complete reaction of 0.15 moles of iron.
Explanation:
The balanced reaction is:
4 Fe + 3 O₂ → 2 Fe₂O₃
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Fe: 4 molesO₂: 3 molesFe₂O₃: 2 molesYou can apply the following rule of three: if by stoichiometry 4 moles of Fe produce 2 moles of Fe₂O₃, 0.15 moles of Fe produce how many moles of Fe₂O₃?
[tex]moles of Fe_{2} O_{3} =\frac{0.15 moles of Fe*2 moles of Fe_{2} O_{3} }{4 moles of Fe}[/tex]
moles of Fe₂O₃= 0.075
0.075 moles of iron oxide would be produced by complete reaction of 0.15 moles of iron.
What is the number of moles in a sample of gas that has a volume of 3.5 L, a
pressure of 200 kPa, and a temperature of 300 K?
Explanation:
[tex]PV = nRT \\ (200000 \times 3.5 \times {10}^{ - 6} ) = n \times 8.314 \times 300 \\ n = \frac{0.07}{2494.2 } \\ n = 2.81 \times {10}^{ - 5} [/tex]
[tex] \small{ \star{ \underline{ \blue{ becker}}}}[/tex]
Base A dissociates 25% in water. Base B dissociates 50%. Base C dissociates
75%. Which base is the WEAKEST conductor of electricity?
Answer:Base A is the weakest conductor electricity
Explanation:
Dissociation is a factor that affects electrical conductivity. The greater the percentage of dissociation for bases the stronger the conductivity of electricity.
Given that
Base A dissociates 25% in water
Base B dissociates 50%.
Base C dissociates 75%
We can conclude that Base A is the weakest conductor oelectricity since it has the lowest percentage of dissociation.
what is the k expression for this reaction? plz help !
Answer:
K = [HI]² / [H₂] [I₂]
Explanation:
To write the expression of equilibrium constant, K, it is important that we know how to obtain the equilibrium constant.
The equilibrium constant, K for a given reaction is simply defined as the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient. Thus, the equilibrium constant is written as follow:
K = [Product] / [Reactant]
Now, we shall determine the equilibrium constant for the reaction given in the question above. This can be obtained as illustrated below:
H₂(g) + I₂(g) —> 2HI (g)
K = [HI]² / [H₂] [I₂]
2C2H2 + 5O2 → 4CO2 + 2H2O
Which of the following statements would be correct if one mole of C2H2 was used in this reaction? (5 points)
a
One mole of oxygen was used in this reaction.
b
Five moles of oxygen were used in this reaction.
c
Four moles of carbon dioxide were produced from this reaction.
d
Two moles of carbon dioxide were produced from this reaction.
Answer:
d. Two moles of carbon dioxide were produced from this reaction
Explanation:
The given chemical reaction can be written as follows;
2C₂H₂ + 5O₂ → 4CO₂ + 2H₂O
From the above chemical reaction, we have;
Two moles of C₂H₂ reacts with five moles of O₂ to produce four moles of CO₂ and two moles of H₂O
We have;
One mole of C₂H₂ will react with two and half moles of O₂ to produce two moles of CO₂ and one mole of H₂O
Therefore, in the above reaction, when one mole of C₂H₂ is used, two moles of CO₂ will be produced.
Which is the correct chemical formula for Pentacarbon Tetraphosphide
Answer:
C5P4
Explanation:
the answer is C5P4 because penta is 5 and tetra is 4
Convert 22 grams of copper Il chloride (Cucl2) to moles.
with work please
You come across two unknown plants and compare their leaves. Plant A has feather like leaves, while Plant B has needles. What type of plant is Plant B? Fern Flowering plant Pine tree Spores
Answer:
The correct answer is - Pine tree.
Explanation:
Coniferous trees or cone-bearing trees normally called conifers adapted their leaves and have needles like leaves that retain more water. Needles do not appear to be leaves but are modified leaves.
Conifer trees adapt this leaf modification to prevent water loss due to transpiration in the case of dry air or atmosphere. Important members of the conifer trees are pine trees, cedars, spruces, and Pines.
A Chemist reacted magnesium and aluminum oxide. A reaction takes place. Explain why
Explanation:
when Magnesium is reacted with Aluminum oxide, Aluminum being a less reactive metal than magnesium, is replaced by magnesium
Al2O3 + 3Mg - 3MgO + 2Al
hence reaction takes place
The concentration of a potassium manganate(VII) solution (KMnO4) is 10 g /l . What is the concentration of this solution in molarity?
Answer:
Have anyone found the answer to this? I’m on this grade result course right now
Explanation:
The concentration of a potassium manganate(VII) solution (KMnO4) is 10 g /L. What is the concentration of this solution in molarity is 0.06 M.
What is the molarity?The ratio of number of moles of solute to the volume of the solution in litre is called molarity. it is denoted by symbol M.
Given concentration (C) of potassium manganate(VII) solution in g/L is 10 g /L
Molarity = C/molar mass of KMnO4 = 10g/L ÷ 158.02g/mol = 0.06 mol/L
To learn more about molarity here.
https://brainly.com/question/2817451
#SPJ3
Definition: This is the energy that comes to Earth from the Sun.
Example: using the sun to dry your laundry hanging on the clothesline
Answer:
well to me it is called natural energy
URGENT!!!
Which statement explains why an increase in molality increases the boiling point of a solution? The addition of solute decreases the solvent’s vapor pressure. A higher temperature must then be applied to overcome the change. The addition of solute increases the solvent’s vapor pressure. A higher temperature must then be applied to overcome the change. The addition of solute increases the solvent’s ability to boil. The solute’s molecules repel the solvent’s molecules, giving them higher binding energy and hence the need for higher temperature.
Answer:
the addition to solute decreases the solvent's vapor pressure. a temperature must then be applied to overcome the change
Explanation:
Answer:
long story short: A
Explanation:
Can animals and plants adapt to climate changes?
Answer:
Yes but will take a very very long time for them to adapt most will die but as gemeration passes they will get used to it
What percentage of a substance remains after 7 half-lives have passed?
A. 0.39
B. 2.5
C. 1.25
D. 0.78
Answer:
Not really sure, buts its either B or C.
Structures and Forces - What is force and external forces.
Question 1) Jacob and Ravleen are moving furniture. They need to move the filing cabinet over 6 feet and it is very heavy. Jacob wants to apply force and push it by putting his hands on point A because he thinks it would be easier to move it from the top as there is less weight on the top. Ravleen says it's better to push at point B because the center of gravity is lower. Which person is correct and EXPLAIN why and what may happen if it is pushed in the wrong spot.
Answer:
The restoring force that prevents the furniture from tipping over when pushing the furniture towards the right, F= W × D
Where;
W = The weight of the furniture
D = The horizontal distance from the center of gravity of the furniture, CG and the to the lower right corner of the furniture
Given that A > D, for the furniture to tip over when pushing above the CG, we have;
F1 × A ≤ W × D
∴ F1 << W or for a force much smaller than W, the weight of the furniture applied above the center of gravity, the furniture will tip over
However when the force F2 is applied, where C < D, we have for no tipping over;
F2 × C ≤ W × D, therefore, given that C < D, when a force much higher than the weight, W, is applied at F2, the furniture will remain upright
Therefore, it is better push at a point lower than or equal to the center of gravity, whereby the point B is lower than the center of gravity, it is better to push at point B, Ravleen is correct and it is better to push at point B because the center of gravity is lower
If the furniture is pushed at the wrong spot it may tip over
Please see attached drawing
Explanation:
Balance the chemical equation using the drop-down options.
CaC2 +
A H20 --->
Ca(OH)2
A C2H2 +
Answer:
CaC2 + 2H20 ⇋Ca(OH)2 + C2H2
Explanation:
CaC2 + A H20 ---> Ca(OH)2 + A C2H2
This is calcium carbide reacting with water to produce calcium hydroxide and ethyne commonly called acetylene.
Let's now balance the equation.
CaC2 + 2H20 ⇋Ca(OH)2 + C2H2
What is the role of a consumer in the flow of energy through a food chain?
Answer:
The role of consumers in an ecosystem is to obtain energy by feeding on other organisms and sometimes transfer energy to other consumers. Changes that affect consumers can impact other organisms within the ecosystem.
Explanation:
Hope this helped Mark BRAINLIEST!!!!
Consumers are organisms that obtain energy by eating other organisms. Consumers may consume either producers or other consumers. Consumers include animals.
What is food chain ?A food chain is a network of links in a food web that begins with producer organisms and ends with an apex predator, detritivore, or decomposer species.
A food chain also demonstrates how organisms are related to one another through the food they consume. Each trophic level is represented by a different level of a food chain.
Producers can produce their own food and energy, but consumers are not the same. Consumers are living things that must hunt, gather, and eat their food.
Thus, Consumers must eat in order to gain energy, or they will perish. Omnivores, carnivores, herbivores, and decomposers are the four types of consumers.
To learn more about the food chain, follow the link;
https://brainly.com/question/16065961
#SPJ6
Which of the following correctly describes a weak acid?
O It completely ionizes.
0 It produces hydroxide ions.
O It partially ionizes.
O It produces hydronium ions that are less effective than those from strong acids.
Answer:
It partially ionizes
Explanation:
Higher tier) Weak acids only partially ionise in water. Only a small fraction of their molecules break into hydrogen ions when added to water.