What are the correct half reactions for the following reaction: Cu2+ + Mg -> Cu + Mg2+

Van der Waals forces hold molecules together by inducing temporary dipoles that attract each other. That is option C

Van Der Waals forces are example of those intermolecular forces which are weaker than ionic and covalent bonds that exists between molecules.

Van Der Waals forces was postulated by a Dutch physicist known as Van Der Waals. He postulated the existence of weak, short-range forces of attraction, which are independent of normal bonding forces, between non-polar molecules. He came to this conclusion after studying the  of real gases at low temperatures and high pressures that:

This is how weak Van Der Waals forces are set up. Therefore, option C is CORRECT

Learn more here:

https://brainly.com/question/11457190

Answer:

Solid sodium hydroxide dissolves in water to form an aqueous solution of ions.

NaOH(s) ⇌ Na+(aq) + OH–(aq) ΔH1 = ?

Solid sodium hydroxide reacts with aqueous hydrochloric acid to form water and an aqueous solution of sodium chloride.

NaOH(s) + H+(aq) + Cl–(aq) ⇌ H2O(l) + Na+(aq) + Cl–(aq) ΔH2 = ?

Solutions of aqueous sodium hydroxide and hydrochloric acid react to form water and aqueous sodium chloride.

Na+(aq) + OH–(aq) + H+(aq) + Cl–(aq) ⇌ H2O(l) + Na+(aq) + Cl–(aq) ΔH3 = ?

Answer:

See figure 1

Explanation:

We have to remember that in the isomer structures we have to change the structure but we have to maintain the same formula, in this case [tex]C_4H_1_1N[/tex].

In the formula, we have 1 nitrogen atom. Therefore we will have as a main functional group the amine group.

In the amines, we have different types of amines. Depending on the number of carbons bonded to the "N" atom. In the primary amines, we have only 1 C-H. In the secondary amines, we have two C-N bonds and in the tertiary amines, we have three C-N bonds.

With this in mind, we can have:

-) Primary amines:

1) n-butyl amine

2) sec-butyl amine including 2 optical isomers

3) isobutyl amine

4) tert-butyl amine

-) Secondary amines:

5) N-methyl n-propyl amine

6) N-methyl isopropyl amine

7) N, N-diethyl amine

-) Tertiary amines:

8) N-ethyl N, N-dimethyl amine

See figure 1

I hope it helps!

Answer:

211.47 grams

Explanation:

We need to set up a dimensional analysis to solve this problem by converting from moles to grams.

First, find the molar mass of HCl. Since the molar mass of H (hydrogen) is 1.01 g/mol and the molar mass of Cl (chlorine) is 35.45 g/mol, then the molar mass of HCl is:

1.01 + 35.45 = 36.46 g/mol

We have 5.8 moles of HCl, so multiply by its molar mass:

(5.8 mol) * (36.46 g/mol) = 211.468 ≈ 211.47 g

The answer is thus 211.47 grams.

~ an aesthetics over

Answer:

[tex]\large\boxed{211.47}\\[/tex] grams

Explanation:

First, you need to gather the atomic masses of the elements involved in the compound - hydrogen and chlorine. Referencing a modern periodic table will give you this information.

[tex]\large\boxed{211.47}[/tex] is the final answer.

Answer:Cobb

Explanation:What y'all

Answer:

Explanation:

50 HP = 50 x 746 watt

= 37300 watt

= 37300 J /s

heat produced in one hour = 60 x 60 x 37300 J

= 134280 x 10³ J

latent heat of vaporization = 2260 x 10³ J / kg .

for evaporation of water of mass 1 kg , 2260 x 10³ J of heat is required .

kg of water being evaporated by boiler per hour

= 134280 x 10³ / 2260 x 10³

= 59.41 kg

rate of production of steam

= 59.41 kg / hr .

Answer:

Atomic mass is calculated by adding protons and neutrons.

Explanation:

Atomic mass is the sum of protons and neutrons in an atomic nucleus. For example, the element Oxygen has 8 protons (derived from the atomic number) and 8 neutrons (derived from subtracting the amount of protons from the atomic mass).

We can craft an equation to show the relationship between these variables.

M - N = P, where M = Mass, N = Neutrons, and P = Protons

This equation can be rearranged to show the relationship between the neutrons and protons leading to the atomic mass. Simply add N to both sides of the equation.

M = N + P

This shows that atomic mass is equivalent to the sum of protons and neutrons in an atom's nucleus.

Answer:

I think its 1.2 cause I divided 15.5 with 12 and got 1.2 as an answer

In an ideal case, the acid would completely protonate. such an acid would be a strong acid.  Dissociation of Formic acid looks like:

HCOOH + H₂O → COOH⁻ + H₃O⁺

one mole of formic acid should give one mole of Hydronium(H₃O⁺) ions

similarly, 0.1 moles of formic acid should produce 0.1 moles of hydronium ions. but we know that it is not the case, a much lesser amount is actually formed.

Which means that Formic acid did not completely dissociate into COOH⁻ and H⁺ ions.

Hence, Formic Acid is a weak acid

We know

Any acid

Formic acid stands for HCOOH

It contains C means dissociation is less .

The dissociation of H+ is less means acidity is less.

Answer:

0.8261 M.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

HC2H3O2 + NaOH —> NaC2H3O2 + H2O

From the balanced equation above, we obtained the following:

Mole ratio of the acid, HC2H3O2 (nA) = 1

Mole ratio of the base, NaOH (nB) = 1

Data obtained from the question include the following:

Volume of acid, HC2H3O2 (Va) = 10 mL

Molarity of acid, HC2H3O2 (Ma) =..?

Volume of base, NaOH (Vb) = 16.95 mL Molarity of base, NaOH (Mb) = 0.4874 M

Finally, we shall determine the molarity of the acid solution, as follow:

MaVa/MbVb = nA/nB

Ma x 10 / 0.4874 x 16.95 = 1

Cross multiply

Ma x 10 = 0.4874 x 16.95

Divide both side by 10

Ma = (0.4874 x 16.95) /10

Ma = 0.8261 M.

Therefore, the molarity of the vinegar solution (HC2H3O2) is 0.8261 M.

Explanation:

1. Nucleus is a memberane bound organelle that contains cell,s chromosomes.

Answer:

The salt breaks into positive chlorine ions and negative sodium icons

Explanation:

The question requested for the wrong option in the list. If we look at the option selected, we will notice that sodium ions are positively charged ions since sodium is a metal. Metals produce cations (positive ions) because they loose electrons. Therefore, a sodium ion can never be negatively charged.

Similarly, chlorine is a highly electronegative nonmetal. It gains electrons in an ionic bond. Hence chlorine ions can not be positive.

Mno4- chemical name is permanganate

Answer:

[tex]V_2=1.17L[/tex]

Explanation:

Hello,

In this case, for dilution processes, we must remember that the amount of solute remains the same, therefore, we can write:

[tex]V_1C_1=V_2C_2[/tex]

Whereas V accounts for volume and C for concentration that in this case is %(m/v). In such a way, the final volume V2 turns out:

[tex]V_2=\frac{V_1C_1}{C_2}= \frac{0.551L*50.0\%}{23.5\%}\\ \\V_2=1.17L[/tex]

Best regards.

Answer:

The median is also the number that is halfway into the set. To find the median, the data should be arranged in order from least to greatest. If there is an even number of items in the data set, then the median is found by taking the mean (average) of the two middlemost numbers.

I hope it helps

Answer:

sodium hexachloroplatinate(IV)- Na2[PtCl6]

dibromobis(ethylenediamine)cobalt(III) bromide- [Co(en)2Br2]Br

pentaamminechlorochromium(III) chloride-[Cr(NH3)5Cl]Cl2

Explanation:

The formulas of the various coordination compounds can be written from their names taking cognisance of the metal oxidation state as shown above. The oxidation state of the metal will determine the number of counter ions present in the coordination compound.

The number ligands are shown by subscripts attached to the ligand symbols. Remember that bidentate ligands such as ethylenediamine bonds to the central metal ion via two donors.

Answer:

The correct answer is: 0.064 V

Explanation:

In a oxidation-reduction reaction, the relation between Gibbs free energy (ΔGº) and cell potential (Eºcell) is given by:

[tex]\Delta G^{0} = -nFE^{0} _{cell}[/tex]

where n is the number of electrons that are transferred in the reaction and F is the Faraday constant (96,500 C/mol e-). Given: ∆G° = +18.55 kJ and n= 3 mol e-, we calculate Eºcell as follows:

+18.55 kJ = (-3 mol e-) x (96500 C/mol e-) x Eºcell

Eºcell= (+18.55 kJ)/(-3 mol e-) x (96500 C/mol e-)

Eºcell= (18550 J)/ (289500 C)

Eºcell= 0.064 J/C

Since 1 Volt= 1 Joule/1 Coulomb, thus:

Eºcell= 0.064 J/C = 0.064 V

Answer:

[tex]\huge\boxed{A \ noble \ gas}[/tex]

Explanation:

A noble gas always exists in a mono-atomic form. This is because the valency of noble gas is zero and thus they don't tend to lose, gain or share electrons. They are inert gases and do not react.

Answer:

a noble gas

Explanation:

the the noble gases exist as mono atomic elements that is helium, neon ,argon, Krypton,etc.

mono atomic elements exist as stable single atoms

Izopropanol doesn't form by Hydration of propene.

Acetone, propanone, or dimethyl ketone, exists as an organic compound with the formula (CH₃)₂CO. It stands for the simplest and smallest ketone. Reduction of ketones can be accomplished by hydrogenation (or) utilizing Grignard Reagent. Let us now decrease propanone to propan-2-ol by hydrogenation. The reduction of propane in the existence of catalyst platinum along with hydrogen provides the product propan-2-ol.

The correct answer is option A.

Izopropanol doesn't form by Hydration of propene.

Learn more about Reduction of propan-2-one, refer:

https://brainly.com/question/14405249

#SPJ2

Explanation:

Introducción:

La designación de los compuestos orgánicos puede hacerse utulizando alguno de los

siguientes sistemas:

a) Mediante nombres triviales o comunes, que expresen alguna propiedad característica

(sabor, color, acción fisiológica, etc.) o hagan referencia a la materia de la cual se extrajo el

compuesto.

b) Mediante nombres racionales que proporcionen una idea de su constitucion química y

destaquen sus analogías estructurales.

La necesidad de una nomenclatura sistemática, que expresara en forma clara, conforme

a normas precisas, el nombre y la estructura de los compuestos orgánicos, ha sido motivo de

preocupación permanente y observada a través de los numerosos congresos internacionales

que, al efecto, se han realizado en diversas oportunidades.

Las bases del actual sistema de nomenclatura fueron establecidas por una comisión que

se reunió en Ginebra en 1892. Posteriormente, fue perfeccionado y ampliado por el Comité de

Nomenclatura de la Unión Internacional de Química Pura y Aplicada, por lo que se conoce

como sistema I.U.P.A.C. (International Union of Pure and Applied Chemistry).

En las reglas aprobadas se ha tratado de introducir los menores cambios posibles a la

terminología universalmente adoptada. El sistema tiene la necesaria flexibilidad como para

adaptar la forma precisa de las palabras, de las terminaciones, etc. a las características de

distintos idiomas.

El nombre de los hidrocarburos consta de tres partes: a) la raíz, que indica el esqueleto

carbonado; b) la terminación o sufijo, que indica el grado de saturación, y c) el prefijo que

diferencia las distintas estructuras isoméricas (distintas estructuras construidas con exactamente

los mismos átomos).

Ej.: CH3-CH2-CH2-CH2-CH3 pentano (tambien llamado n-pentano)

penta: raíz que señala el número de átomos de carbono que componen la cadena principal

del compuesto.

-ano: sufijo que indica que el hidrocarburo es saturado

Answer:

Explanation:

We shall apply Arrhenius equation which is given below .

[tex]ln\frac{k_2}{k_1} = \frac{E_a}{R} [\frac{1}{T_1} -\frac{1}{T_2} ][/tex]

K₂ and K₁ are rate constant at temperature T₂ and T₁ , Ea is activation energy .

Putting the given values

[tex]ln\frac{5.9}{1} = \frac{39500}{8.3} [\frac{1}{298} -\frac{1}{T_2} ][/tex]

[tex].000373= [\frac{1}{298} -\frac{1}{T_2} ][/tex]

T₂ = 335.27 K

= 62.27 °C

The higher temperature is 62.27°C.

Given that the activation energy of the reaction is:

Eₐ =  39.5 kJ/mol

initial temperature T₁ = 25°C = 298K

Let the final temperature be T₂

The rate constant at temperature T₁ be K₁, and at a temperature T₂ be K₂.

According to the question: K₂/K₁ = 5.9

Now, applying the Arrhenius equation we get:

[tex]\ln\frac{K_2}{K1}=\frac{E_a}{R}[\frac{1}{T_1} -\frac{1}{T_2}]\\\\\ln(5.9)= \frac{39.5}{8.3}[\frac{1}{298} -\frac{1}{T_2}]\\\\0.000373=\frac{1}{298} -\frac{1}{T_2}[/tex]

T₂ = 335.27K

T₂ =  335.27 -273

T₂ = 62.27°C

Learn more about rate constant:

https://brainly.com/question/24658842?referrer=searchResults

Answer:

A) when the titration is nearing the end point in titration the color of the solution starts to change and the change in color does not disappear as fast as it was during the beginning of the titration  

B) The volume of NaOH required to permanently change the indicator at the end point is  a  drop of NaOH

c) The volume required by samples #2 and #3 will be the same i.e 19.90 mL of NaOH, if the concentration of KHP base used for the samples are the same

D) The volume required by samples #2 and #3 will be the same i.e 29.05 mL OF NaOH, if the concentration of Vinegar and base for the samples are the same

Explanation:

A) when the titration is nearing the end point in titration the color of the solution starts to change and the change in color does not disappear as fast as it was during the beginning of the titration  

B) The volume of NaOH required to permanently change the indicator at the end point is  a  drop of NaOH

c) The volume required by samples #2 and #3 will be the same i.e 19.90 mL of NaOH, if the concentration of KHP base used for the samples are the same

D) The volume required by samples #2 and #3 will be the same i.e 29.05 mL OF NaOH, if the concentration of Vinegar and base for the samples are the same

Answer:

[tex]\rho _{oil}<\rho _{plastic}<\rho _{water}[/tex]

Explanation:

Hello,

In this case, since water and oil are immiscible due to the oil's nonpolarity and water's polarity, when mixed, the oil remains on the water since it is less dense than water. In such a way, for a plastic sunk in the oil and floating on the water (in middle of them) we can conclude that the plastic have a mid density, therefore, the required organization is:

[tex]\rho _{oil}<\rho _{plastic}<\rho _{water}[/tex]

Best regards.

Answer:

1. This reaction is: B. Endothermic.

2. When the temperature is increased the equilibrium constant, K: A. Increases.

3. When the temperature is increased the equilibrium concentration of NO2: A. Increases.

Explanation:

Hello,

In this case, considering the images, we can state that the red color at high temperature is due to the presence of nitrogen dioxide (product) and the lower coloring is due to the presence of dinitrogen tetroxide (reactant) at low temperature.

With the aforementioned, we can conclude that the chemical reaction:

[tex]N_2O_4(g) \rightleftharpoons 2 NO_2(g)[/tex]

Is endothermic since high temperatures favor the formation of the product and the low temperatures favor the consumption of the the reactant. thereby:

1. This reaction is: B. Endothermic.

2. When the temperature is increased the equilibrium constant, K: A. Increases. In this particular case, since the dinitrogen tetroxide has 1 molecule and nitrogen dioxide two molecules in the chemical reaction, the entropy change should be positive, therefore, by increasing the T, the Gibbs free energy of reaction becomes more negative:

[tex]G=H-TS[/tex]

As Gibbs free energy becomes more negative, the equilibrium constant becomes bigger given their relationship:

[tex]K=exp(-\frac{\Delta G}{RT} )[/tex]

3. When the temperature is increased the equilibrium concentration of NO2: A. Increases.

Regards.

Answer:

А It is hard because its ions are held together by strong electrostatic attractions.

B It is malleable because its atoms can easily move past one another without disrupting the bonding.  

Explanation:

These are correct explanations of the properties of magnesium.

C is wrong. Mg is a good conductor of electricity and it has metallic bonds.

D is wrong. Mg has no molecules. It has no intermolecular forces.

Answer:

The pressure law states that for a constant volume of gas in a sealed container the temperature of the gas is directly proportional to its pressure. ... This means that they have more collisions with each other and the sides of the container and hence the pressure is increased.

The temperature of the gas is directly proportional to its pressure.

The ideal gas equation can be given as:

PV = nRT

where P =pressure, V = volume, n = moles of gas, R = rydberg constant, and T = temperature.

The pressure law states that for a constant volume of gas in a container, the temperature of the gas is directly proportional to its pressure which means there are more collisions with each other and the sides of the container and hence the pressure is increased.

Hence, the temperature of the gas is directly proportional to its pressure.

Learn more about the ideal gas here:

https://brainly.com/question/27691721

#SPJ5

Answer:

C) 237.96682 amu

Explanation:

The symbol for neptunium-236 is given as;

²³⁶₉₃Np

This element has 93 protons and (236 - 93 = 143) neutrons.

Mass Number =Total mass of Protons + Total mass of neutrons

Total Mass pf protons = 93 * 1.007825 amu, = 93.727725 amu

Total mass of Neutrons = 143 * 1.008665 amu = 144.239095 amu

Mass = 144.239095 + 93.727725  = 237.96682 amu

Correct option is option C.

Answer:

Explanation:

mass of W in gram  = mole x molecular weight

= .02 x 74 = 1.48 gm

mass of V in gram

first of all we shall calculate the no of moles of V

1 mole = 6.0 x  10²³ atoms

1 x 10²³ atoms = 1 / 6 moles

mass of V in grams

= 40 / 6

= 6.67 grams .

So V has greater mass .

ii )

molecular weight of sodium chloride

= 58.5 gm

14.63 gram of sodium chloride

= 14.63 / 58.5 = .25 moles

250 cm³ = 250 x 10⁻³ dm³

So 250 x 10⁻³ dm³ of solution contains .25 moles of salt

1 dm³ of solution will contain .25 / 250 x 10⁻³ mole

= 1 mole

so concentration of solution is 1 mole per dm³

Answer:

endet nach selam nw

4gh7