Answer:
Conjugate acid- H^+
Conjugate base- SO4^2-
Terminology- Amphoteric
Explanation:
Consider the equilibrum shown below;
HSO4^-(aq)<-------> H^+(aq) + SO4^2-(aq)
Hence, When HSO4^- is dissolved in aqueous solution, it's conjugate acid is H^+ and it's conjugate base is SO4^2- as shown in the equation above.
If a substance behaves both as an acid and as a base, then the substance is Amphoteric in nature.
The conjugate acid [tex]H^+[/tex]and base [tex]SO4^2-[/tex] and the term would be Amphoteric.
Conjugate acid-
What is Amphoteric?Amphoteric is described as the term employed to denote a substance that possesses the characteristics of both an acid, as well as, a base.
Given equilibrium:
[tex]HSO4^-(aq)[/tex] → [tex]H^+(aq) + SO4^2-(aq)[/tex]
Therefore, the dissolution of [tex]HSO4^-[/tex] in water leads to the display acid that is conjugate [tex]H^+[/tex] and the conugate base [tex]SO4^2-[/tex].
In case, the properties of both are reflected, it shows amphoteric nature.
Learn more about "Acid" here:
brainly.com/question/26083032
1. Marisa determined the melting point of a substance to be 24.5C. Find the percent error of her measurement if the actual melting point is 31.2C.
Answer:
[tex]\%\ Error = 21.5\%[/tex]
Explanation:
Given
[tex]Measured = 24.5[/tex]
[tex]Actual = 31.2[/tex]
Required
Determine the percentage error
First, we need to determine the difference in the measurement
[tex]Difference = |Actual - Measured|[/tex]
[tex]Difference = |31.2 - 24.5|[/tex]
[tex]Difference = |6.7|[/tex]
[tex]Difference = 6.7[/tex]
The percentage error is calculated as thus:
[tex]\%\ Error = \frac{Difference * 100\%}{Actual}[/tex]
[tex]\%\ Error = \frac{6.7 * 100\%}{31.2}[/tex]
[tex]\%\ Error = \frac{670\%}{31.2}[/tex]
[tex]\%\ Error = 21.4743589744\%[/tex]
[tex]\%\ Error = 21.5\%[/tex] approximated
23994Pu + 10n → BCBa + 9138Sr + 3 10n
B=??
a
150
b
100
c
140
d
146
Answer:
the answer to this question is c 140
2.
(3x – 4y = -10
(6x + 3y = –42
SOLUTION:
Answer:
Is like for solving for the solution for both equations??
Stephen learned that there are two forces that keep the moon in orbit around Earth. How do these forces keep the moon from flying off into space?
A. Gravity keeps the moon in motion, and inertia attracts the moon toward Earth.
B. Gravity attracts the moon toward Earth, and inertia keeps the moon in motion.
C. Gravity attracts the moon toward Earth, and the distance keeps it from going further away.
D. Mass weighs the moon down so it stays close to Earth, and inertia keeps the moon in motion.
Answer:
b
Explanation:
Answer:
Gravity attracts the moon Earth, and Inertia keeps the moon in motion.
Explanation:
How many atoms are in caco4
Answer: 6
Explanation:
One way to represent a substance is with a chemical formula. In the formula CO2, what do the symbols Cand o refer to?
Answer:
C is for carbon and O is for oxygen
Which of the following are mole ratios from the balanced chemical equation below? Select all that
apply.
FeCl3 + 3HF - FeF3 + 3HCI
1 mole HF/1 mole HCI
3 mole HF/1 mole FeF3
1 mole FeCl3/3 mnole HF
3 mnole HF/1 mole FeCl3
The mole ratio of the given reaction is 1 mole HF/1 mole HCI; option A.
What are mole ratios?Mole ratios are ratios of the moles of reactants and products in a balanced chemical equation of a reaction.
Mole ratios are obtained from balanced chemical equations.
The balanced equation of the reaction is given below:
FeCl3 + 3HF ----> FeF3 + 3HCIThe mole ratio of the given reaction is 1 mole HF/1 mole HCI.
Learn more about mole ratio at: https://brainly.com/question/19099163
#SPJ1
which element has the highest ionization energy?B, Al, Ga, In
Answer:
BORON
Ionization energy decreases down the group and going from left to right the period,
Luckily you have the elements from the same group that is Group III A also called boron family,
The position of Elements in this group are
Boron (B)Aluminium (Al)Gallium (Ga)Indium(In)ThalliumNihoiumso keeping rules in mind the first element in the group has highest I.E. that is boron
How to separate given mixture?
Answer:
Chromatography involves solvent separation on a solid medium.
Distillation takes advantage of differences in boiling points.
Evaporation removes a liquid from a solution to leave a solid material.
Filtration separates solids of different sizes.
Explanation:
Which is the product of that reaction
Answer:
B
Explanation:
What types of materials are better at absorbing energy from radiation?
Answer:
Explanation:
Materials are clothes and heavy rope
The last column of the periodic table contains the noble gases, elements that do not easily form chemical bonds. why don’t these gases tend to form chemical bonds?
PLS HELPPP I WILL MARK BRAINLESY
for the following reaction, provide the missing information
Answer:
19. Option B. ⁰₋₁B
20. Option D. ²¹⁰₈₄Po
Explanation:
19. ²²⁸₈₈Ra —> ²²⁸₈₉Ac + ʸₓZ
Thus, we can determine ʸₓZ as follow:
228 = 228 + y
Collect like terms
228 – 228 = y
y = 0
88 = 89 + x
Collect like terms
88 – 89 = x
x = –1
Thus,
ʸ ₓZ => ⁰₋₁Z => ⁰₋₁B
²²⁸₈₈Ra —> ²²⁸₈₉Ac + ʸₓZ
²²⁸₈₈Ra —> ²²⁸₈₉Ac + ⁰₋₁B
20. ᵘᵥX —> ²⁰⁶₈₂Pb + ⁴₂He
Thus, we can determine ᵘᵥX as follow:
u = 206 + 4
u = 210
v = 82 + 2
v = 84
Thus,
ᵘᵥX => ²¹⁰₈₄X => ²¹⁰₈₄Po
ᵘᵥX —> ²⁰⁶₈₂Pb + ⁴₂He
²¹⁰₈₄Po —> ²⁰⁶₈₂Pb + ⁴₂He
A sample of propane, C3H8, contains 13.8 moles of carbon atoms. How many total moles of atoms does the sample contain
Answer:
[tex]Total = 50.6\ moles[/tex]
Explanation:
Given
[tex]Propane = C_3H_8[/tex]
Represent Carbon with C and Hydrogen with H
[tex]C = 13.8[/tex]
Required
Determine the total moles
First, we need to represent propane as a ratio
[tex]C_3H_8[/tex] implies
[tex]C:H = 3:8[/tex]
So, we're to first solve for H when [tex]C = 13.8[/tex]
Substitute 13.8 for C
[tex]13.8 : H = 3 : 8[/tex]
Convert to fraction
[tex]\frac{13.8}{H} = \frac{3}{8}[/tex]
Cross Multiply
[tex]3 * H = 13.8 * 8[/tex]
[tex]3 H = 110.4[/tex]
Solve for H
[tex]H = 110.4/3[/tex]
[tex]H = 36.8[/tex]
So, when
[tex]C = 13.8[/tex]
[tex]H = 36.8[/tex]
[tex]Total = C + H[/tex]
[tex]Total = 13.8 + 36.8[/tex]
[tex]Total = 50.6\ moles[/tex]
How do the test variables (independent variables) and outcome variables (dependent variables) in an experiment compare? A. The test variables (independent variables) and outcome variables (dependent variables) are the same things. B. The test variable (independent variable) controls the outcome variable (dependent variable). C. The test variable (independent variable) and outcome variable (dependent variable) have no affect on each other. D. The outcome variable (dependent variable) controls the test variable (independent variable).
Answer:
I'm on the exact same queston
Answer:
The test variable (independent variable) controls the outcome variable (dependent variable)
Explanation:
its right on study island
A chemist decomposes samples of several compounds; the masses of their constituent elements are listed. Calculate the empirical formula for each compound.
a. 1.245 g Ni, 5.381 g I,
b. 2.677 g Ba, 3.115 g Br,
c. 2.128 g Be, 7.557 g S, 15.107 g
Answer:
you can see the empirical formula at the pic
The empirical formula for compound (a) is NiI2, (b) is BaBr2 and (c) is BeS.
What is empirical formula?
Empirical formula of a compound is defined as the simplest whole number ratio of atoms present in a compound.
(a) 1.245 g Ni : 5.381 g I
Mole of Ni ; Mole of I = 1.245/59 : 5.381/127 = 0.02 : 0.04 = 1:2
So the formula is NiI2
(b) 2.677 g Ba : 3.115 g Br
Mole of Ba : Mole of Br = 2.677/137 : 3.115/60 = 0.019 : 0.038
= 0.02 : 0.04 = 1:2
So the formula is BaBr2
(c) 2.128 g Be : 7.557 g S
Mole of Be : Mole of S = 2.128/9 : 7.557/32 = 0.2 : 0.2 = 1:1
So the formula is BeS
Thus, empirical formula for compound (a) is NiI2, (b) is BaBr2 and (c) is BeS.
To learn more about empirical formula, refer to the link below:
https://brainly.com/question/11588623
#SPJ2
Electrolysis of water produces its constituent elements, hydrogen and oxygen. This process is represented by the following balanced chemical equation:
2 H2O(l) → 2 H2(g) + O2(g).
If 8.05 grams of oxygen gas was produced in the reaction, how many molecules of water were decomposed?
Do enter the coefficient of the answer only. Do NOT include the unit in final answer.
_______________________________ × 1023 H2O molecules.
Answer:
3.011 × 10²³
Explanation:
Given data:
Mass of oxygen produced = 8.05 g
Molecules of water decomposed = ?
Solution:
Balance chemical equation:
2H₂O → 2H₂ + O₂
Number of moles of oxygen produced:
Number of moles = mass/molar mass
Number of moles = 8.05 g/ 32 g/mol
Number of moles = 0.25 mol
Now we will compare the moles of water with oxygen.
O₂ : H₂O
1 : 2
0.25 : 2×0.25 =0.5 mol
0.5 moles of water were decomposed.
Molecules of water decomposed:
1 mole = 6.022× 10²³ molecules of water
0.5 mol ×6.022× 10²³ molecules of water/ 1mol
3.011 × 10²³ molecules of water
You may have to recrystallize any or all of the components of your extraction mixture, benzoic acid, ethyl-4-aminobenzoate and fluorenone, depending on their purity after isolation. You should have the recystallization solvents in your protocol. They are respectively:
Answer:
the Recrystallization solvents are;
-Sodium Hydroxide Base (NaOH)
- Hydrochloric Acid (HCl)
- Sand bath when acidic and basic components are removed.
Explanation:
Recrystallization is simply a technique used to purify an impure compound in a solvent.
Now, we want to purify the mixture of benzoic acid, Ethyl-4-aminobenzoate and fluorenone.
For the benzoic acid, it can be separated out of the mixture by addition of sodium hydroxide base (NaOH).
The Ethyl - 4 - aminobenzoate will be separated from the mixture by the addition of Hydrochloric Acid (HCl).
The fluorenone would be separated out by heating the mixture in a sand bath after the basic and acidic components have already been extracted out.
Thus, the Recrystallization solvents are;
-Sodium Hydroxide Base (NaOH)
- Hydrochloric Acid (HCl)
- Sand bath when acidic and basic components are removed.
as a student,living in the philippines considered to be part of the global south,how are you going to compete and survive challenges of globalization?
Answer:
Natural Selection
Explanation:
Define waves in your own words.
Answer:
Waves is the disturbance or variation that transfer energy from one location to other
Answer:
this is not in my words but i think this will help
(put some of the words you would use in this)
Explanation:
Transverse waves are always characterized by particle motion being perpendicular to wave motion. A longitudinal wave is a wave in which particles of the medium move in a direction parallel to the direction that the wave moves. ... Longitudinal waves are always characterized by particle motion being parallel to wave motion.
hope i helped
which atom would have the highest ionization energy? H, Li, Na
highest ionization energy
sodium Na
Calculate the final volume of a solution prepared by diluting a 4.0 M solution with a volume of 7.0 mL to 0.80 M in milliliters.
Answer:
Explanation:
Let the final volume be v .
from the formula
S₁ V₁ = S₂V₂
4 x 7 = .8 x V₂
V₂ = 35 mL
Final volume of the solution will be 35 mL .
CHEMISTRY!! 50 POINTS!
There are 5.5 L of a gas present at -38.0 C. What is the temperature if the volume of the gas has changed to 1.30 L?
Answer:
The answer to this question is 33.8
What is the percent of iron and oxygen in iron(III) oxide?
Answer:
69.94% iron by mass.
Explanation:
When does carbon dioxide absorb the most heat energy?
during freezing
during deposition
during sublimation
during condensation
Answer:
during sublimation
Explanation:
just took the test
The image below shows a model of the atom. Which subatomic particle does the arrow in
the image below identify?
?
A. electron
B. neutron
C. orbital
D. proton
The correct answer is A. Electron
Explanation:
The model of this atom depicts the nucleus of this in the center of the model, this section of the atom contains sub-particles known as protons and neutrons. Moreover, in the atom, the nucleus is surrounded by three sub-particles that orbit or move around the nucleus. These sub-particles are the electrons; these differ from other sub-particles because they have a negative charge and they are not part of the nucleus. Also, these move around the nucleus is orbits, although they move similarly to waves. According to this, the correct answer is A.
Calculate the following quantity: molarity of a solution prepared by diluting 49.16 mL of 0.0270 M ammonium sulfate to 525.00 mL.
Answer:
2.528x10⁻³M
Explanation:
Molarity is an unit of concentration used in chemistry. Is defined as the moles of solute per liter of solution.
To find the molarity of the solution we need to determine the moles of ammonium sulfate present in the initial 49.16mL solution and, with total volume, we can find the molarity, thus:
Moles ammonium sulfate:
49.16mL = 0.04916L * (0.0270 moles / L) =
1.327x10⁻³moles ammonium sulfate
These moles are present in 525.0mL = 0.525L. Thus, molarity of the solution will be:
1.327x10⁻³moles ammonium sulfate / 0.525L =
2.528x10⁻³Mdetermine the total amount of heat, in joules, required to completely vaporize a 50.0 gram sample of H20 at its boiling point at standard pressure
Answer: 1.13 x 10^5
Explanation:
is used to locate and track severe storm
Answer:
Weather radar is used to locate and track severe storm.
When solid Fe metal is put into an aqueous solution of SnSO4, solid Sn metal and a solution of FeSO4 result. Write the net ionic equation for the reaction.
Answer:Fe(s) + Sn^2+(aq) ----> Fe^2+(aq) + Sn(s)
Explanation:
The net ionic equation involved is;
Fe(s) + Sn^2+(aq) ----> Fe^2+(aq) + Sn(s)
We must recall that iron is above tin in the electrochemical series. The implication of this is that, iron has a more negative reduction potential compared to tin.
A metal can displace metals below it in the electrochemical series from their aqeous solution. Hence, iron displaces tin from it's solution.